"Primary Only" toggle not working

I'm running the Aperture Trial on my new Macbook Pro with Leopard pre-installed. Seeing the Aperture trial version in my apps folder, I decided to give it a spin on some of my RAW images that I've been using Bridge to organize. But I'm getting pretty frustrated because, while I generally like the program, I can't perform adjustments on more than one image at once. The "Primary Only" toggle seems to not be working. I can see the selection outlines change when I press S or pick it from the edit menu. But no matter what I do I can only seem to adjust one image at once.
Any ideas?

Actually, it does move metadata. It'll move almost any settings you've made to the image you lift from including RAW fine tuning, adjustments, ratings and any IPTC or custom metadata you've added. I hadn't actually noticed that the contextual menu says metadata (admittedly confusing), as I always use the keyboard shortcut 'O' or the 'Lift Tool' button on the toolbar.
Have you watched the videos at http://www.apple.com/aperture/tips/ including the one on the lift-n-stamp tool?
Ian

Similar Messages

  • Email notifications are the only thing NOT working!!!

    Email notifications are the only thing NOT working!!! Everything is set up correctly. The form works and the person submitting gets a message, but I don't. I tried 3 different email addresses and still not working. Any real fix for this?

    Hello:
    Try resetting the PRAM.
    Barry

  • "Number of bands" toggle not working

    A few of us on this board have noticed that when using the Apple AuGraphic equalizer that the "number of bands" toggle at the bottom of the viewer that switches it from 31 to 10 bands does not seem to work. It remains 31 bands no matter what.
    Has anyone else experienced that? Is it a bug or are we missing something?
    Thanks

    I wanted to ask here first to see if I was doing something wrong before I reported it.
    Did you happen to see my other thread also about the Apple Eq? In addition to the "number of bands" toggle not working, I can't get the eq to have any effect on audio clips. Could these things be related?

  • Windows key inoperative dv7-4285 windows 7 - 64 bit. only key not working

    Windows key inoperative dv7-4285 Windows 7 - 64 bit. The Windows key is the only key not working.

    Thanks for the information,
    I have a couple of suggestions that may help with this issue. My first suggestion would be to uninstall and reinstall the drivers for the keyboard.
    Follow these steps to do that:
    Click the "Start Menu"
    Type "Device" in the search box under all programs
    Select "Device Manager"
    Click "Keyboards"
    Remove all devices under keyboards by right clicking and selecting" uninstall" on each device
    Restart the computer
    How long has the button not been working?
    Are there any other keys not working or producing the wrong character?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Primary network does not work, guest network does work

    I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.

    After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.

  • The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works.

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

  • Some toggles not working in Inspector

    Hi,
    I'm running FCPX 10.1.3 & OS 10.9.5 and some of Final Cut Pro X's toggles in the Inspector are not working after this last update of FCPX.
    Some when clicked only briefly display Show/Hide but never expand nor collapse.
    The same thing happens with some of the triangles in the Inspector. The triangle pivots but nothing expands nor collapses.
    I have used Digital Rebellion's Pro Suite and removed FCPX completely and installed from scratch.
    I have repaired the disc permissions. Rebooted several times.
    I have made another admin user account and it's doing it when logged into that account as well.
    Has anyone had a similar issue and/or a possible solution?
    Thank you!
    -Doren

    Uninstall Adobe Reader's plug-in.
    Remove the following two files from  /Library/Internet Plug-Ins/:
    AdobePDFViewer.plugin
    AdobePDFViewerNPAPI.plugin
    Open Safari Preferences > Extensions. Do you see AdobePDFViewer? If yes. disable.
    Log out/in and test.
    Another option is to download and install this plugin. Schubert|it PDF Browser Plugin . PDF Browser Plugin 2 is free for not-for-profit activities if used at home or at educational institutions.
    http://www.schubert-it.com/pluginpdf/

  • Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

    Hello,
    I would like to ask a question, hopeing it is resolved in some way and i missed it.
    I have installed SP3 Rollup 4 on our Exchange 2010 server.
    This added 2 new Powershell commands
    Get-MailboxSentItemsConfiguration
    Set-MailboxSentItemsConfiguration
    This can be used to manipulate where mail is stored in the send items.
    Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
    SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
    From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
    What we really want it to use the From only way.
    We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
    2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
    Here is is stated on 1 July 2013
    http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
    From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
    That was on 26 March 2013
    http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
    NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
    We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
    Looking foward to any replies.
    Kind regards,
    Jeroen van Velzen

    I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
    I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
    but the other does.
    If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
    configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
    If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
    the shared mailbox you will see it in Deleted items folder of the shared mailbox.
    The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
    This was accomplished without using the Set-MailboxSentItemsConfiguration command.
    We are running Exchange 2010 SP3 RU4.

  • [RESOLVED] acpi-eeepc-generic Super Hybrid Engine Toggle Not Working

    Re my earlier post here: https://bbs.archlinux.org/viewtopic.php?id=105265
    This morning my she toggle stopped working. When I try to toggle my on screen notification displays "Super Hybrid Engine: to performance" after each key press. I haven't made any changes to the system other than editing my .conkyrc and powering the system down.
    Edit to add resolution:  I'm not sure why, but if I put the system to sleep (Fn+F1) then wake with the power button, the SHE functions.
    Last edited by badfrog88 (2010-09-22 14:32:59)

    IM back wrote:
    I cant get SHE to work with laptop_mode bacuse loading eeepc_laptop dosent load
    # modprobe eeepc_laptop
    FATAL: Error inserting eeepc_laptop (/lib/modules/2.6.39-ARCH/kernel/drivers/platform/x86/eeepc-laptop.ko.gz): No such device
    eeepc 1215b not an eeepc? id really like to have SHE working as right now with otherwise fully functioning laptop_mode i still only get 5h of battery life.
    Did you add to your kernel-parameters
    acpi_osi=Linux
    And it's called Hybrid - care to adjust the thread-title?

  • Erase 'Last Stroke Only' Is Not Working Correctly

    I'm trying out After Effects CC having been working in CS 5.5, and finding that my normal workflow is not working out. I would like to use the clone stamp tool to create a stroke, then use the erase tool with the 'last stroke only' option in order to refine the clone stroke. However, in CC when I use the erase tool for this, the image does not update in the comp viewer, and using undo does not get rid of the erase in the layer window. If I press undo a second time, the whole clone stroke deletes. If I change the preview resolution of the comp viewer then the erase appears in the comp window. If I don't change the resolution but simply advance the timeline cursor by a frame then the erase appears as it should for however long the clone stroke lasts, but refuses to appear on the first frame it was created in. Is all of this a bug or something about the 'last stroke only' option that has changed since CS 5.5?
    First image shows how the erased line does not appear in the comp viewer. Second image shows frame 2 where it does suddenly appear.
    Using an iMac, OS X 10.8.5, 8gb ram.

    I'd advise you to provide details so we do not have to make wild guesses
    What version of iPhoto? Of the OS? what exactly is happening? What have you tried to resolve this? How long have you waited for them to downad? have you looked at http://www.apple.com/support/icloud/photo-stream/ and verified tha tyour set up is correct and looked through the FAQs and troubleshooting tips? Has it ever worked? What has changed since it worked?
    LN

  • Visible (screen only) is not working

    Hello everybody:
    I've been experiencing some problems whenever I try to put an object with the "Visible (Screen Only)" presence property. The issue comes whenever I print the form: it always show all the objects. That happens to me when I use forms imported from a previously scanned document (importing the documents as an image), but not with new ones.
    I'm using LiveCycle Es2 and I changed the program properties in order to make the form compatible with 8.1 or later versions. Niall O'Donovan suggested me to check if there was any warning related with the version, but there is no one.
    Does anybody know anything about this?
    Thanks for your time!
    Regards,
    Javier Maíllo

    Hi Javier,
    I had a chance to look at this now and I think the issue may be the fact that the form was created by importing an existing Word/PDF document. Depending on how you do this, the form may only be saved as a Static PDF form and certain dynamic functionality (like Visible Screen Only) will not be available.
    I don't think you will get the previous advice of prePrint/postPrint script to work either (changing the presence of the objects), as this would require the form to be saved as a Dynamic XML Form in the save as dialog.
    Niall

  • Why my cronjob for primary/standby server not work, but worked at prompt

    I have redhat linux version 5, oracle servers 11gr2.
    I have cronjobs to monitor tablespace usage and alert logs.
    However they not work at the cron job, but if I execute them at the command prompt, it worked.
    What might be the problem?
    example of the cron script:
    Head of the script:
    #!/bin/bash
    . /u01/app/oracle/bin/hydev_env
    MAILTO="dba.com"
    LOG=/u01/app/oracle/dba_cron/out/tablespace_90_full.html
    echo $ORACLE_SID
    sqlplus -S <<-EOF >>/dev/null
    / as sysdba
    Cron job set is like this:
    #------------------------TABLESPACES Check------------------------------------------------------------------------
    0,35 * * * * /u01/app/oracle/dba_cron/scripts/tablespaces_over_90%.sh >/u01/app/oracle/dba_cron/out/tablespaces_over_90%.log > 2>&1
    Vi /var/spool/mail/oracle:
    Has error like this:
    /bin/sh: -c: line 0: syntax error near unexpected token `2'
    /bin/sh: -c: line 0: `/u01/app/oracle/dba_cron/scripts/chk_ora_alert_all.sh >/u01/app/oracle/dba_cron/out/chk_oracle_alert_all.log > 2>&1'
    Any guru help?

    Hello;
    Generally this is an environment issue.
    The script works at the command prompt because when you signed on your user picked the environment settings from a profile, for example .bash_profile.
    A crontab job has no environment. That is why you call hydev_env near the beginning of the script. So something of some things are missing from your env file mostly likely.
    What I do is keep an environment file for each database at a location like this :
    /u01/app/oracle/dba_tool/env ( /u01/app/oracle/dba_tool/env/PRIMARY.env )
    The file PRIMARY.env is <database_name>.env
    What I keep in it is everything I need that a background job like crontab would need :
    ORACLE_BASE=/u01/app/oracle
    ULIMIT=unlimited
    ORACLE_SID=PRIMARY
    ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
    ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
    LIBPATH=$LD_LIBRARY_PATH:/usr/lib
    TNS_ADMIN=$ORACLE_HOME/network/admin
    PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
    export TERM=vt100
    export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
    export ORACLE_HOME
    export LIBPATH LD_LIBRARY_PATH ORA_NLS33
    export TNS_ADMIN
    export PATH
    export MAILTO=
    Important If you are not sure of a setting on your system type "env" at a Linux prompt while logged on as the user where the script works. Change as needed in your .env file.
    Here a script I call from crontab to check tablespaces
    #!/bin/bash
    if [ "$1" ]
    then DBNAME=$1
    else
    echo "basename $0 : Syntax error : use . quickcheck <DBNAME> "
    exit 1
    fi
    # Set the Environmental variable for the instance
    . /u01/app/oracle/dba_tool/env/${DBNAME}.env
    $ORACLE_HOME/bin/sqlplus /nolog <<EOF
       connect / as sysdba
    @/u01/app/oracle/dba_tool/bin/quickaudit
    EOFNotice how I pass the db name as a parameter to the script so I can use the script with several database without changing it.
    /u01/app/oracle/dba_tool/bin/quickcheck.sh PRIMARY
    The crontab to make this run daily at 5:12 am is :
    12 05 * * * /u01/app/oracle/dba_tool/bin/quickcheck.sh PRIMARY > /tmp/quickcheck.out
    Best Regards
    mseberg

  • Policy to force use of AD photos only is not working (global policy and client policy) - Users can change their picture

    Hi,
    On Lync server 2013 we are trying to disable the option to change the photo on lync client, the global policy has been set to display only AD photos, this didn't work so we create a client policy with the same setting and applied to users but is not working.
    Is there something that we are missing?
    Regards.

    So you mean to say the "Edit or Remove Picture" button is active on the Lync client and you want to disable it?
    AFAIK, The button is active if you are on Exchange 2013. Is this true for you?
    If Yes, maybe you can try this on your Exchange Shell. 
    Set-OwaVirtualDirectory -identity "owa (Default Web Site)" -SetPhotoEnabled $False
    Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you have asked, please mark the thread as answered to aid others when they are looking for solutions to similar problems or queries. <p>-------------------------------------------------------
    </p> <p>The opinions expressed here are solely my own and do not express the views or opinions of my employer.</p>

  • Adobe slide fx sample toggle not working

    Hi,
    http://labs.adobe.com/technologies/spry/samples/effects/multiple_slides_sample.html
    is the url for a sample of using the slide FX on multiple elements.
    The toggle doesn't seem to work. I need this for a project of mine,
    and I desperately need a solution, where a page contains links that
    slide in their own div, but clicking on the link, toggles (slides
    out) it's own div. Much like in the above sample, but with the
    toggle actually working when you click on the buttons.
    Interested in workarounds as well. Thanks for any help.
    Cheers
    David

    Hi,
    http://labs.adobe.com/technologies/spry/samples/effects/multiple_slides_sample.html
    is the url for a sample of using the slide FX on multiple elements.
    The toggle doesn't seem to work. I need this for a project of mine,
    and I desperately need a solution, where a page contains links that
    slide in their own div, but clicking on the link, toggles (slides
    out) it's own div. Much like in the above sample, but with the
    toggle actually working when you click on the buttons.
    Interested in workarounds as well. Thanks for any help.
    Cheers
    David

  • Keyboard shortcut in Leopard for autohide dock toggle not working?

    Hi all,
    I have a question about a keyboard shortcut in Leopard.
    I've recently started auto-hiding my dock, using the checkbox in system preferences. I find this gives a nice clear screen for most situations, but would like a shortcut to effectivly toggle that checkbox on/off.
    I read about command-option-D but this doesn't seem to do anything. I tried killall Dock, but that didn't help.
    I found some reference online searching to TextExpander causing problems, but I do not have that installed (couldn't find any reference of it on my machine).
    One thing that does work is ctrl-F3 which brings the Dock up from hidden. Only thing is as soon as you click on an application it dissappears again. What I really want is to toggle the auto-hide option on and off with a keyboard shortcut.
    Does anyone have any suggestions?
    Thanks,

    go to system preferences->keyboard&mouse->keyboard shortcuts. make sure that the shortcut to auto-hide and show the Dock is enabled and is set to commandoptionD. those are the defaults but maybe yours got changed or disabled for some reason.

Maybe you are looking for