Primary/secondary colours for metal themes

How do I get the primary and secondary colours for the current Metal theme? The methods getPrimary1() etc have protected access!
I don't want to get one of the other colours that use the primary colours as default, eg getControlDarkShadow(), because in the current theme this may have been overridden!
Any suggestions?
Thanks,
Phil

Similar Messages

Generating license for ISE high availability primary/secondary nodes

We have two ISE servers that will act as primary/secondary in a high availability setup.
The ISE 1.0.4 installation guide, page 93, mentions that "If you have two Cisco ISE nodes configured for high availability, then you must include both the primary and secondary Administration ISE node hardware and IDs in the license file."
However, after entering the PAK in the licensing page, the only required fields are:
- Primary Product ID
- Primary Version ID
- Primary Serial No
In this case, how can i include both primary and secondry HW and IDs?
Thanks in advance.

I am refering you a Cisco ISE Nodes for High Availability configuration guide, Please check:
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html#wp1128454

Can you change colours for events to make them darker. I can hardly see them in year veiw.

How do you make the colours for events in my calendar darker. With the up grade to Yosemite the colours in my year view are so light I can hardly see them.

i wanted to know the same thing, as wanted to change some of the dates to red, but also because it accidently imported birthdays from address book and all of the birthdays came up in red. so maybe if you want to change one or two dates to red maybe christmas day. you make a contact and set the birthday to 25th December and the date will go red.
silly but might work.
Alex

Cisco ASA - Invert primary/secondary

Hello
This is my first post in this forum.
I haven't found an answear to my issue, so I decided to open a new discussion
We take care of 2 Cisco ASA 5580 (primary/secondary) working as usual (active/standby). Image version 8.2.5.
Today I found that the firewall that has been supposed to rule as primary, actually has been the secondary and vice-versa.
How can I configure (and what's the impact, as they are active im customer/business environment) to invert the situation: the primary become the secondary and the secondary become the primary.
I'm not talking about to perform a failover, but a config to fix that confusion with roles.
Regards
Christian

Hi,
Welcome to the CSC
Since we are talking about an Active/Standby ASA Failover environment then configuring the "primary" and "secondary" in the "failover" configurations of the ASAs doesnt to my understanding have much meaning to the firewall operation other than deciding which becomes Active WHEN they BOTH boot at the same time.
If we for example have the below situation
We have ASA1 and ASA2 in Active/Standby Failover
ASA1 is configured as "primary" and ASA2 is configured as "secondary"
ASA1 is originally the Active unit and ASA2 the Standby unit
Now lets assume that either ASA1 boots or becomes Standby because of one of its interfaces failing THEN to my understanding there is NO mechanism in the Active/Standby Failover that would return the Active role back to the ASA1 when it becomes operational.
However in the case of Active/Active Failover its possible to configure a "preempt" parameter that defines that the unit that you have decided as the Active unit will return to Active role after network outage after a configured perioid of time. This is NOT possible on Active/Standby.
So in normal networking operation to my understanding the only way to really keep the preferred physical ASA as Active is to monitor the Failover and manually set the original physical ASA Active if there has been a failover.
There doesnt seem to be any automatic mechanism for the Active role to return to the original Active physical ASA.
IF you are just talking about changing the commands "failover lan unit primary" and "failover lan unit secondary" to the correct physical ASAs THEN sadly I can't say for sure (without testing) what effect configuring those commands have (when changing them around). I'd presume that changing these wont have any effect on the operation of the firewall as in production they DONT actually decide which unit STAYS Active
According to the Command Reference of 8.2 software the default setting is Secondary
I imagine you could possibly do the following (But cant say for 100% certainty without testing it myself)
remove the possible configuration "failover lan unit secondary" from the other unit
remove the "failover lan unit primary" from the other unit
configure the "failover lan unit primary" on the correct unit
And finally if you want configure the other unit with the "secondary" option (even though the default setting should be secondary according to the command reference)
Maybe I'll try to check if I have a identical Failover pair of ASA (physical) to test this out for you.
Heres link to the Command Reference for 8.2 software and the command "failover lan unit"
http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/ef.html#wp1930580
Hope the information was helpfull.
- Jouni

Using rsync w/ two Essbase servers (Primary & Secondary)

I"m looking for information regarding the use of rsync w/ Essbase. I have two Essbase servers, Primary(Prod), and Secondary(DR) Essbase servers I wish to keep in sync. Essbase is running on Linux OS, and is 931.
any information would be helpful.
Thanks

Hi Ed,
Thanks very much for your comments...
My Primary is currently the Log Collector anyway, if I upgrade them both at the same time then this would cause downtime for TACACS authentication.
Would you advise breaking the pair, leaving the Primary (Log Collector) active, upgrading the Secondary to become the new Primary after the upgrade, restore the Log Collector to the new Primary. Then upgrading the (old Primary/new secondary) and re-registering them both?
Further input would be appreciated - many thanks...

Primary & Secondary Languages?

Hi,
What is the differentce between primary and Secondary langues with inheritence and current langues?
Thanks In advance
Vijay

hi,
Primary & secondary languages:
Repository can be maintained in multiple languages. In the console we will define in how many languages repository is maintained ( 3 0r 4 languages), you can maintain N number of language layers. when ever you are logging into the repostory using language English, if it is not maintained it will be opened in other language in the order you maintained in the repository. we can compare the data in different languages, colour coding.
MDM multilingual support fully addresses all of the requirements for multiple languages side-by-side within a single MDM repository. It starts with an end-to-end Unicode implementation that supports both Western and Eastern languages, reflects a data model with multiple language layers that avoids data duplication while ensuring data
integrity, and features an innovative user interface that offers flexibility and efficiency during the entry, editing, browsing, and publishing of multilingual data.
An individual MDM repository can be defined as storing data for an effectively unlimited number of languages, chosen from a list of languages and locales recognized by the system (e.g. English [US] and English [UK]), including both western European and Eastern languages.
follow these links:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/e0dbe6b4310a29e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/43/e0dbe6b4310a29e10000000a11466f/frameset.htm
hope this may help you,
regards,
srinivas

Set up secondary DNS for mail?

When I first configured my server using the advance setup, I successfully setup my DNS services using a domain name for the primary zone that is not a registered domain. I have no intention of ever using the domain name I use internally on the net.
I usually host my mail services with third-party hosting company and just use my server for file and print services. However, I recently purchased a new domain name and have considered using the mail services to host the domain. My question is:
Do I need to setup a secondary zone for this domain, or should I start over and reconfigure my server? I had read that once you configure your primary DNS, it is hard to go back and reconfigure it.
Also, once I have the DNS properly configured, it is my understanding that I'll just need to point the MX records at my hosting company towards my server to make it work, correct?

If you're just looking for mail then there's no need to start from scratch - you can just tell the mail server to accept mail for your new domain in addition to the existing domain.
Before you do this, though, make sure you have a) a static IP address and b) working reverse DNS for your IP address. If you don't have this then remote mail servers may not accept your mail since you look like a spammer.
Apart from that, once you setup postfix to accept mail for your new domain then, yes, all you need to do is change your MX records.

Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed

Hi ,
We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
2 EGT092 Conversion of table "RSBATCHCTRL_PAR" was restarted
2 EGT241 The conversion is continued at step "6"
2 EGT246 Type of conversion: "T" -> "T"
2 EGT240XBegin step "RSBATCHCTRL_PAR-STEP6":
4 EGT281 sql:
4 ED0314 CREATE
4 ED0314 INDEX [RSBATCHCTRL_PAR~DB] ON [RSBATCHCTRL_PAR]
4 ED0314 ( [JOBNAME] ,
4 ED0314 [JOBCOUNT] ,
4 ED0314 [SERVER] ,
4 ED0314 [HOST] ,
4 ED0314 [WP_NO] ,
4 ED0314 [WP_PID] ,
4 ED0314 [PROCESS_TYPE] )
4 ED0314 WITH ( ONLINE=OFF )
4 ED0314 ON [PRIMARY]
2 ED0314 Line 1: Incorrect syntax near '('.
3 EDA093 "DDL time(___1):" ".........6" milliseconds
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
2EEGT221 Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed
2EEGT239 Error in step "RSBATCHCTRL_PAR-STEP6"
2 EGT253XTotal time for table "RSBATCHCTRL_PAR": "000:00:00"
2EEGT094 Conversion could not be restarted
2 EGT067 Request for "RSBATCHCTRL_PAR" could not be executed
1 ED0327XProcess..................: "ferrari_12"
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "ferrari_12"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0314 Phase 002................: < 1 sec. (Partitioning)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "03.06.2009", "12:47:21"
1 ED0318 Program end==============================================================
1 ETP166 CONVERSION OF DD OBJECTS (TBATG)
1 ETP110 end date and time : "20090603124721"
1 ETP111 exit code : "8"
1 ETP199 ######################################
System properties:
SAP - BI7.0 with EHP1
Database - MSSQL 2000
OS - Windows2003
Please suggest.
Thanks in advance,
Pavan.

> We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
> 2 ED0314 Line 1: Incorrect syntax near '('.
> 3 EDA093 "DDL time(___1):" ".........6" milliseconds
> 2EEGT236 The SQL statement was not executed
This is a known problem with SQL Server 2000, see
Note 1180553 - Syntax error 170 during index creation on SQL 2000
I highly suggest upgrading to SQL Server 2005 or 2008.
Markus

Colours for Line Chart

I am trying to create comparative line charts for yearly data over at least a decade (i.e. at least 10 individual lines on one chart).
Any lines over six don't print. The unprinted lines have a colour allocated against them in the associated table, but not in the chart legend - the labels do appear in the legend.
I have been trying to manipulate the Chart Colours… (which does appear to be restricted to six) without any success.
(P.S. For any American readers - my spelling corrector is automatically inserting the 'u' in colours.)

Graham & Heather Harrison wrote:
I'm not sure I like that saying something can't be done is the correct answer…
You may dislike it if you wish (we are free) but this will not change the program design.
However you can have the medal if you tell me how to superpose charts - I can't find that in the Users Guide.
It was described here many times.
(1) build the two charts
(2) strip every titles, legends,… from one of them
(3) adjust the min and max values if necessary (on both axis)
(4) select the chart which you strip then from the format bar define its background to none so it will be transparent.
(5) drag the 'transparent' chart above the 'complete' one.
If you don't group them, they will remain 'living' charts which will evolve with changes in datas.
I didn't checked but I assume that grouping them will freeze them.
If the medal is made of TRUE chocolate, I'm interested.
It it is made of the brown mixture which is sold as 'chocolate' in the USA, I am not
Yvan KOENIG (from FRANCE lundi 29 juin 2009 18:04:52)

Can we create secondary index for a cluster table

hi
can we create secondary index for a cluster table

Jyothsna,
There seems to be some kind of misunderstanding here. You <i>cannot</i> create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).
Hope this clarifies things,
Mark

Setting different colours for different cells in a list

Hi,
I was wondering if we could select two cells in a list and have two different colours for each of them.
For example, if i select the 1st and 9th cells in a list, can i have the first one to be green and the 9th one to be red?

HI,
Pls check this.
http://forums.adobe.com/message/2216445#2216445
It is for the datagrid but you can made similarly for the List. Let me know if you have any issue.
with Regards,
Shardul Singh Bartwal

Looking for a theme that looks like the default theme.

I'm looking for a theme that looks exactly like the default theme, but that doesn't use the colours of my gnome theme. Right now I'm using a dark gnome theme that looks great, but looks horrible with firefox. Anybody got any suggestions?
Alternatively, is there another way to make firefox ignore my gtk theme?

I don't like the way firefox themes look, I want the default theme, but without gtk coloring. Surely it must be possible?

How can I change the colours for read/unread emails on a Samsung S6?

The only difference between the colours for read and unread emails on a Samsung S6 is a very pale grey versus white background. Is it possible to change these colours, or font colours, so that the difference between the read and unread emails is more obvious?

Hm, I belive it has nothing to do with phone, most likely it's the email application that handles settings. You need to fire your email application and check the settings. Unfortunately at least in GMail app there is no way to change the theme, you might want to look for other email clients that offer customisable themes or simply more themes to select from. Appologies that I don't have any recommndations to make

How to edit background colour of Revolution theme

Would like to change the background colour of this theme. At moment it seems to offer only a dark one. In Inspector, images can be inserted under the background tab but no alternaives available for changing the colour of the area where the title appears. Any thoughts?

Editing the Background Image in an iDVD Theme Template
http://help.lafayette.edu/node/489
Customizing iDVD Themes
http://www.peachpit.com/articles/article.aspx?p=427227

How do you change the colour of the "colour boxes" in themes?

Creating a book in Aperture the various "Themes" offer you different layouts. When you are in a Theme - is there a way to change the colours of the background boxes (Not page colour) - I have searched everywhere to see how to do this and a simple thing like this seems like it is not possible. Yes you could make a photo of the correct colour you want and drag it in but surely there is a simple way of changing the colour of these theme boxes.
The theme I am using is Special Occasion and I want to darken the lightblue boxes behind the text.
Would appreciate anyone out there who could advise on this please, thank you in advance.
Richard
Apperture 3.4.3
iMac 21.5 OS 10.7.5
iMac 27 OS 10.6.8 (the best)

Richard,
there is no built-in option to change the color boxes. You can only change them by patching the Resorces in the Aperture application bundle, and that is risky.
The color of the background boxes is set in the property list (for the Extra Large Book):
/Applications/Aperture.app/Contents/Resources/Book Themes/Special Occasion/ExtraLarge/Graphics/BlueRect.plist
The current value is:
backgroundColor {224, 241, 238, 100}
To try what happens, when this value is changed, I edited it to {100, 200, 255, 100}
You will not really want to patch your Aperture application bundle
What you might try, would be to copy the "Special Occasion" subfolder of the Book Themes and to create your own custom theme from this and install it in your user library
~/Library/Application Support/Aperture/Book Themes/
-- Léonie

Primary/secondary colours for metal themes

Similar Messages

Maybe you are looking for