Primary - Stream[live_2521213_QPzTR2Uo] Status: NetStream.Publish.Rejected

Have anyone had this same problem on trying to bradcast from FMLE to Justin.tv??
I get this Log:
Mon Jun 14 2010 18:18:21 : Video Encoding Started
Mon Jun 14 2010 18:18:22 : Audio Encoding Started
Mon Jun 14 2010 18:18:26 : Primary - Disconnected
Mon Jun 14 2010 18:18:29 : Primary - Re-establishing connection, attempt 1
Mon Jun 14 2010 18:18:30 : Primary - Reconnected to FMS/3,5,2,654
Mon Jun 14 2010 18:18:30 : Primary - Stream[live_2521213_QPzTR2Uo] Status: Success
Mon Jun 14 2010 18:18:30 : Primary - Stream[live_2521213_QPzTR2Uo] Status: NetStream.Publish.Rejected
Mon Jun 14 2010 18:18:30 : Primary - Network Status: NetConnection.Connect.Closed status
Mon Jun 14 2010 18:18:35 : Primary - Disconnected
Mon Jun 14 2010 18:18:38 : Primary - Re-establishing connection, attempt 1
Mon Jun 14 2010 18:18:39 : Primary - Reconnected to FMS/3,5,2,654
Mon Jun 14 2010 18:18:39 : Primary - Stream[live_2521213_QPzTR2Uo] Status: Success
Mon Jun 14 2010 18:18:39 : Primary - Stream[live_2521213_QPzTR2Uo] Status: NetStream.Publish.Rejected
Mon Jun 14 2010 18:18:39 : Primary - Network Status: NetConnection.Connect.Closed status
Mon Jun 14 2010 18:18:44 : Primary - Disconnected
Mon Jun 14 2010 18:18:47 : Primary - Re-establishing connection, attempt 1
And it goes on and on every 5 secs, can anyone help me???

The only thing I can think of is there is an issue with your authentication. Have you changed your justin.tv password since you generated the XML file? In the justin.tv wiki it says
"IMPORTANT: Beware that the text box labeled "Stream" contains a key that is like a password for streaming to your channel. Be careful when you are broadcasting your desktop not to show that area!"
This implies to me that the XML file gets generated using the password that you use when you logged into justin.tv. I think if you generate the XML and then change your password the XML file expires. Try generating a new XML file, make sure to Open it in FMLE and try streaming again.

Similar Messages

Problem with connection ( NetStream.Publish.BadName)

Fri Sep 11 2009 08:52:10 : Session Started
Fri Sep 11 2009 08:52:11 : Audio Encoding Started
Fri Sep 11 2009 08:52:11 : Video Encoding Started
Fri Sep 11 2009 09:13:59 : Primary - Network Status: NetConnection.Connect.Closed status
Fri Sep 11 2009 09:14:04 : Primary - Disconnected
Fri Sep 11 2009 09:14:04 : Primary - Re-establishing connection, attempt 1
Fri Sep 11 2009 09:14:05 : Primary - Reconnected to FMS/3,0,1,123
Fri Sep 11 2009 09:14:05 : Primary - Network Command: onBWDone
Fri Sep 11 2009 09:14:05 : Primary - Stream[onetv] Status: Success
Fri Sep 11 2009 09:14:05 : Primary - Network Command: onFCPublish
Fri Sep 11 2009 09:14:07 : Primary - Stream[onetv] Status: NetStream.Publish.Start
Fri Sep 11 2009 09:14:58 : Primary - Network Status: NetConnection.Connect.Closed status
Fri Sep 11 2009 09:15:04 : Primary - Disconnected
Fri Sep 11 2009 09:15:05 : Primary - Re-establishing connection, attempt 1
Fri Sep 11 2009 09:15:05 : Primary - Reconnected to FMS/3,0,1,123
Fri Sep 11 2009 09:15:05 : Primary - Stream[onetv] Status: Success
Fri Sep 11 2009 09:15:05 : Primary - Network Command: onFCPublish
Fri Sep 11 2009 09:15:07 : Primary - Stream[onetv] Status: NetStream.Publish.BadName
Fri Sep 11 2009 09:27:20 : Audio Encoding Stopped
Fri Sep 11 2009 09:27:20 : Video Encoding Stopped
Fri Sep 11 2009 09:27:20 : Session Stopped
Fri Sep 11 2009 09:27:23 : Primary - Network Status: NetConnection.Connect.Closed status
Fri Sep 11 2009 09:27:23 : Primary - Disconnected
Fri Sep 11 2009 09:27:24 : Primary - Connected to FMS/3,0,1,123
Fri Sep 11 2009 09:27:24 : Primary - Network Command: onBWDone
Fri Sep 11 2009 09:27:28 : Primary - Network Command: onFCPublish
Fri Sep 11 2009 09:27:28 : Primary - Stream[onetv] Status: Success
Fri Sep 11 2009 09:27:28 : Primary - Stream[onetv] Status: NetStream.Publish.Start
Fri Sep 11 2009 09:27:28 : Session Started
Fri Sep 11 2009 09:27:29 : Video Encoding Started
Fri Sep 11 2009 09:27:29 : Audio Encoding Started
Fri Sep 11 2009 12:23:03 : Primary - Network Status: NetConnection.Connect.Closed status
Fri Sep 11 2009 12:23:09 : Primary - Disconnected
Fri Sep 11 2009 12:23:09 : Primary - Re-establishing connection, attempt 1
Fri Sep 11 2009 12:23:09 : Primary - Reconnected to FMS/3,0,1,123
Fri Sep 11 2009 12:23:09 : Primary - Stream[onetv] Status: Success
Fri Sep 11 2009 12:23:09 : Primary - Network Command: onFCPublish
Fri Sep 11 2009 12:23:11 : Primary - Stream[onetv] Status: NetStream.Publish.BadName
Fri Sep 11 2009 12:26:26 : Audio Encoding Stopped
Fri Sep 11 2009 12:26:26 : Video Encoding Stopped
Fri Sep 11 2009 12:26:26 : Session Stopped
Fri Sep 11 2009 12:26:32 : Primary - Network Status: NetConnection.Connect.Closed status
Fri Sep 11 2009 12:26:32 : Primary - Disconnected
Fri Sep 11 2009 12:26:37 : Primary - Connected to FMS/3,0,1,123
Fri Sep 11 2009 12:26:49 : Primary - Network Command: onFCPublish
Fri Sep 11 2009 12:26:49 : Primary - Stream[onetv] Status: Success
Fri Sep 11 2009 12:26:49 : Primary - Stream[onetv] Status: NetStream.Publish.Start
Fri Sep 11 2009 12:26:49 : Session Started
Fri Sep 11 2009 12:26:50 : Audio Encoding Started
Fri Sep 11 2009 12:26:50 : Video Encoding Started
Hy, this is from my log.
I connect the flash media encoder to flash media server, and after a short time it disconnect from server and try to reconect automatically, that is good, but IT DON'T CONNECT!!!
Stream[onetv] Status: NetStream.Publish.BadName
Fri Sep 11 2009 12:26:26 : Audio Encoding Stopped
Fri Sep 11 2009 12:26:26 : Video Encoding Stopped
Fri Sep 11 2009 12:26:26 : Session Stopped
Where is the problem??? What i can do to resolve this problem?????
I'm waiting for your answers!
Thanks

The NetStream.Publish.BadName status means an attempt was made to publish to a stream that is already being published by someone else. Is another client using the same stream name?
About the connections being closed, there a lots of conditions that could cause the connection to be lost. It may not be an FMS or FMLE error, it could be poor conditions on the local network, or between the local network and the server.

HI,Why every five minutes, the server - side NetStream.publish failure

RTMP spread to the FMS, and then create netGroup and NetStream objects on the server side, then the NetStream.publish (), the beginning of everything is normal, but after five minutes, very strange happens to be five minutes, the client node receives less thanstream had, and I monitor the status of this server-side NetStream no change is to publish the start, why the five minutes it will automatically stop publishing flow RTMP stream has been no problem in the transmission

i assume, from your post, that you are using FMS and are publishing a multicast stream.
if you are using the "Flash Media Development Server", prior to release 4.5, multicast streams time out after about 10 minutes. as of release 4.5, multicast streams time out after about 30 minutes. to see this and other limits of the Development Server, see:
http://www.adobe.com/products/flashmediaserver/helpmechoose.html
if that is not the problem, then if you are writing your own server-side scripts, perhaps you are not anchoring a NetStream, Stream, or NetConnection object properly and it is being destroyed by the garbage collector.
if you need more help with Flash Media Server, you should direct your questions to the Flash Media Server forums. the Codename Cirrus service is not based on FMS.

Using variable name for Netstream Publish() (actionscript)

Relatively new to Actionscript. In the netstream publish() or play() methods, can I pass variable names to the methods instead of hard-coding the stream name?
Example:
private function publishLiveStream():void
            ns = new NetStream(nc);
            ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            ns.client = this;
          // blah blah other stuff...
           ns.publish("thefilename", "record");
I want to replace "thefilename" with a value passed from an input box or use dynamic naming (i.e. current date & time).

you can use in procedure using sunopisis technology
OdiExportMaster "-TODIR=/temp/" "-ZIPFILE_NAME=export.zip" "-XML_CHARSET=ISO-8859-1" "-JAVA_CHARSET=ISO8859_1" "-EXPORT_VERSIONS=YES"
or you can use (unix System)
OdiExportMaster "-TODIR=/#v_FileName" "-ZIPFILE_NAME=export.zip" "-XML_CHARSET=ISO-8859-1" "-JAVA_CHARSET=ISO8859_1" "-EXPORT_VERSIONS=YES"
Hope it will work
Thanks

NetStream.Publish.Failed

I'm trying to connect 2 swfs over Stratus and the second client is getting NetStream.Publish.Failed when I try to publish a stream. They both have connected to Stratus via the NetConnection and one can publish a stream but the second can not. I've made sue that each swf is using a different name to publish. I can't find this error listed anywhere in the documentation it only listed NetStream.Publish.BadName. I'm using the AIR 2 RC1 beta sdk from adobe labs set to publish for 10.1.
Are there any other reasons why i would be getting NetStream.Publish.Failed?

I found out why it was failing. I was entering the peerID I wanted to allow connection from instead of allowing any direction connection.
so I had:
stream = new NetStream(connection, farID);
stream.publish( channel );
where is should be:
stream = new NetStream(connection, NetStream.DIRECT_CONNECTIONS);
stream.publish( channel );
then the other client needs to use both my farID and name of my stream in order to connect

NetStream.publish for P2P NetGroup fails in the FMS 4.0 AS

Hi,
I recently tried to modify the system-provided codes in the "multicast" folder, and could not get it work. I pinned down the issue to be the function call NetStream.publish("p2p_pindao1", "live") always failed for me. The proof the function call failed including:
1. The returned value is false.
2. I got no further events beyond NetStream.Connect.Success, i.e. I did not get the expected NetStream.Publish.Start
The following are the testing codes
application.onAppStart = function()
var nc = new NetConnection();
nc.onStatus = testNetStatus;
nc.connect("rtmfp://localhost/TVLive");
trace("to connect");
function testNetStatus(info)
trace("TestNetStatus:" + info.code);
var gs = new GroupSpecifier("net.lysk.pindao1");
gs.serverChannelEnabled = true;
gs.postingEnabled = true;
gs.peerToPeerDisabled = false;
// Multicast address over which to exchange peer discovery.
//var p2pm = "224.0.0.255:30000"; // BUGBUG
// Must be enabled for LAN peer discovery to work
//gs.ipMulticastMemberUpdatesEnabled = true;
var ng = new NetGroup(this, gs);
ng.objNc = this;
ng.objGs = gs;
ng.onStatus = testNetGroupStatus;
function testNetGroupStatus(info)
trace("testNetGroupStatus:" + info.code);
var ns = new NetStream(this.objNc, this.objGs);
ns.onStatus = testNetStreamStatus;
function testNetStreamStatus(info)
trace("testNetStreamStatus:" + info.code);
if (info.code == "NetStream.Connect.Success")
if(!this.attach(Stream.get("mp4:sample1_1000kbps.f4v")))
trace("can not attach");
if (!this.publish("testpublish", "live"))
trace ("can not publish");
tracing outputs are the following:
to connect
TestNetStatus:NetConnection.Connect.Success
testNetGroupStatus:NetGroup.Connect.Success
testNetStreamStatus:NetStream.Connect.Success
can not publish
Your help in solving the problem will be highly appreciated.
Thanks.

em, it appears I was wrong in believing peerToPeerDisabled=true sufficed for P2P publishing, while multicastEnabled was for IP multicast. I will try out the answer. Thanks for the help.

NetStream.Publish.BadName

For some reason my Internet connection between FME and FMS is
not stable. When connection
with my live stream is dropped I can't reconnect to FMS and
I'm getting " NetStream.Publish.BadName"
error. It is because previous session (project) exists for
random time.
The only solution I made is to put FME in command line mode
in batch continous loop (as
FME exits on that error so the standard reconnect procedure
does not work) - it takes even
few minutes in few cases I was able to trace (many tries). In
GUI mode situation is much is
worse - there is dialog window that requires clicking when
that error occurs.
The other one is manual and requires someone watching stream
24/7 - vhost restart - plus all
clients are dropped. Baaad - it is better to make clients
wait for stream 2-5 minutes than force all of them
to restart live stream Flash player.
Is live streaming with FME + FMS designed to work only on
stable LAN connection?
Even if that is true such disconnects can occur - so this bug
is really anoying.
Does anyone found other solutions than mine?

The same problem with latest FME 3.2 and FMS 4.5 default live app. Setting PublishTimeout=-1 serverside and/or increasing reconnect interval in FME does not help.
Any workaround except custom live app with shared objects?

NetStream publish and play synchronize buffers

NetStream publish and play synchronize buffers

I haven't tried to run your code, but something obvious is
the server-side code. It doesn't do anything.
When you publish a stream, you need to tell other client to
connect to it... manually. There are three thing to account for. A
client connecting needs to subscribe to all existing streams. A
client connecting needs to inform all existings clients that it has
published its stream and give them the stream name so they can
subscribe. The client needs to receive stream names of any new
(future) connecting clients so it can subscribe to their stream.
First you need to publish your stream... lets say this is
client A and publishes a stream named stream_A.
1. Then you need to send the stream name (stream_A) to all
other existing clients, so they can subscribe to it.
2. Then you need to receive the names of existing clients
streams, so the client can subscribe to them.
The logic in step 1, will handle any new clients connecting
in the future.
If anyone sees any errors in this or has a better method..
please feel free to add to it....

NetStream.publish() to AMS ends up with 1kb file.

I'm using Adobe Media Server 4.5 and the FLEX 4.6.0 sdk.
I have an .swf application that connects to Adobe Media Server over RMTP, takes audio and video input from the user's webcam and mic, and does a NetStream.publish() to stream the file to the server. When the user is done, I do a NetStream.stop(). On occasion, the resulting file will end up with a size of 1kb.
What's causing this and how can I prevent it, or otherwise end the session and inform the user that something went wrong?
Alternatively, these forums seem dead, so does anyone know of a place where my question might be better suited?

Solved by changing the frame rate of the footage (image sequence) into any other frame rate, then change back to desired frame rate. In my case, after load the image sequence >check inspector of footage >change current frame rate (from 24fps to other fps) >change back frame rate to 24fps. Same bug in version 3.5.2. Hope it helps.

Is it possible to change the status from Bid Rejected to Bid submitted?

Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.

Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M

Confirmation status I1016 release rejected

Hi SRM gurus,
We are working on classic scenario on SRM 5.0. We created a shopping cart, PO and confirmation.
We have the status of the confirmation as I1016 release rejected when we do the conf. from EBP. If we do the GR in the backend the conf. is updated.
For all PO's the EBP conf. is not transfered to the backend. We tried to run the clean req req report manually. We tried to search thru the OSS notes and also thru this forum but could not find worthy info.
Can any one suggest what could be possible reasons?
We have our workflow working fine with the status as approved. If we try to replicate the same manually with the BBP_PD_CONF_GETDETAIL it gives the same status.
Is there any way to change the status of the conf. so that it will be updated in the backend.
Workflow conditions are working perfect as there is no workflow error also.
Best regards,
Sridhar.

Hi
Please try this ->
The status of the Rejected shopping cart can be seen under Stats : head.
You can see the status in CRM_JEST table using the GUID of the shopping cart.
The status will be updated with I1016 (Release rejected) from I1015 (Awaiting approval).
Also look in the transaction - bbp_pd .
See related Notes ->
Note 958297 Search for confirmations with transfer errors
Note 537459 Confirmation cannot be reversed despite invoice quantity = 0
Note 1073012 Search for Confirmations with Status 'All'
Note 1014108 No DocB status change after SRM document is rejected
Note 827638 Populate possible statuses for PO correctly in extraction
Hope this makes you clear. Clarifications are welcome.
Regards
- Atul

I Can't lock an entity that has "OK" calculation status and "Published" review level

The problem into the HFM aplication is that I have to lock the actual period but one entity has "OK" calculation status and "Published" review level; when I clic "lock" on the entity, the system send a message "The process Unit cannot be locked if it needs to be calculated, translated, or consolidated"
Thank you

Check the Other Value dimensions. Locks are value specific(So locking Entity Currency doesn't necessarily lock Parent Currency). Make sure all the value dimensions are at OK status.

How to check the status of published vi in webpage

Is there any method, property or way to check the status of published vit in webpage.
my problem is that i have a continous running vit which i have published in webpage. when user slects some option/button then the front panel of that vit loaded into webpage and can perform different funtion. when user close the page or navigates to another page (means the front panel in webpage is no longer available). i want to know the status of vit, that now user doesnot use this vit so i have to close it.
regards

Now i have fixed the issue by using invoke method to check the number of connections.

How to know the status of stream played using NetStream.Play method ?

I am playing stream data published by third party server
similar to FCS by creating NetStream object and calling Play method
on it. Now the problem is, sometimes I am not able to view the
published stream by playing it using Play method. Also it does not
call OnStatus method of NetSteam. How can I know the status(or
result) of Play method ?
Note: NetConnection gets created successfully. I get status
of NetStream.Play.Start / Stop when I put local flv as a first
parameter to Play method

Hi
There are SQL reports in the following zip which has SQLDeveloper reports for runtime objects such as mappings and process flows;
http://www.oracle.com/technology/products/warehouse/htdocs/Experts/owb_sqldeveloper.zip
Cheers
David

Live Webcam and Netstream.publish HELP!

Hello! Im new to the forums. Im working on a project for work and im using FMS 3 and AS3. I've gotten to a point where google cant help me anymore. When I get my webcamera with flash and allow the camera to be used it then opens a netstream to the FMS server, which for some reason doesnt work all the way. I can see the new stream being published but i just stops and you cant view it. Here is my code.
var my_nc:NetConnection = new NetConnection();
my_nc.connect("rtmp://my_fms_server_ip/live/livestream");
var camera ;
var video ;
function onCameraStatus( evt ):void {
    if (evt.code == "Camera.Muted"){
        trace("Camera Access Has Been Denied!") ;
    if (evt.code == "Camera.Unmuted"){
        trace("Camera Access Has Been Granted") ;
camera = Camera.getCamera() ;
camera.addEventListener(StatusEvent.STATUS, onCameraStatus) ;
if (camera == null)
       Security.showSettings(SecurityPanel.CAMERA) ;
   }else{
video = new Video(camera.width, camera.height) ;
video.attachCamera(camera) ;
addChild(video) ;
var my_ns:NetStream = new NetStream(my_nc);
my_ns.attachCamera(camera);
my_ns.publish("cwysong");
Please Help!

I got everything working.. here is my code. FYI this is done in Actionscript 2.0 and im passing variables from PHP to actionscript using FlashVars.
     var nc:NetConnection = new NetConnection();
     nc.connect("rtmp://My.Server.IP/live/"+ confid);
     var ns:NetStream = new NetStream(nc);
mycam = Camera.get();
     mymic = Microphone.get();
     myvid.attachVideo(mycam);
     mycam.setQuality(84500,0);
     mymic.setRate(11);
     ns.attachAudio(mymic);
     ns.attachVideo(mycam);
ns.publish(+ uname);
there ya go!

Primary - Stream[live_2521213_QPzTR2Uo] Status: NetStream.Publish.Rejected

Similar Messages

Maybe you are looking for