PRIMAVERA 6.0 - CIM Techologies, Inc. - Davao City
PRIMAVERA 6.0 ENTERPRISE FOR PROJECT MANAGEMENT
Course 102
This course provides hands-on training for Primavera's client/server based solution Participants will gain a thorough background in the concepts of planning and scheduling. Scheduling techniques will be covered. This three-day course leads you through hands-on workshops that create and track an entire project to completion. All workshops and instruction use the three basic elements of project management: schedule, resource and costs.
Learning Outcomes
Create a project with activities and resources
Calculate a schedule
Analyze resource/cost data Compare current vs. target schedules
Courses
for more info visit us at [CIM Technologies, Inc|www.cimtehnologies.com] or call us at 63 (2) 752 2468 loc 19/36 and look for Carla
Similar Messages
-
Hi there, so this is my situation. I recently been having a good time to a very good paradise. Making photos while swimming I use this Touch block app to make things easy when the phone is wet. Yes it was very good, I took a lot of pictures untill my phone drained all its power. Since I am on an island far from the resort, I charged my phone with a Power bank (Which I used several times) ad of course before I charged my phone I wipe it clean and dry, open the MicroSD and Charging lid just to check if did the water penetrated and found all is good and dry. Then I just left my phone there charging while Im havng a good swim.
I came back for some refreshments, I noticed my phone was charged upto 14% then its heating very much not the usual heat I ever experienced before. I quickly plugoff the charger and inspect my phone. I noticed the camera lens covered with moist inside. The phone is still operating when I turn it on, but I was unable to touch it, I mean the screen is not working. I didn't saw the Touch block app was running according to the notification bar and on the screen. I tried the bottons and it does works fine. After that I noticed the walkman was running and playing music but there was no sound, I tried to put my MDR-V55 and I can listen the music was playing at all. I tried to turn it off but I can't touched the screen. What I did was I took the Sim and put it back again just to make a restart. What happens next was annoying because it didn't fix the problem. The screen is still not functioning and the walkman is running. My first and best option was to wait untill I get home and repair my phone through PC companion. Far from home and my the battery is draining, I didn't make it my phone is all out of power.
Yeah finally I plug it on the PC and now nothing happens. It does something but not charging at all. The Notification light turns red when I plug it then some notifications on the PC that USB was connected then my Phone displays battery charging then suddenly disapprears but the red notification light is still there yet I can't do anything with it by pressing the power botton. I waited for about an hour to see a difference while it was still connected in my pc. After the waiting nothing happens, the notif light was still red and not charged at all. I plug it on a wall charger and got the same results, Charging battery appears then a just vanished instantly.I don't really know what just happen, but I feel like it has something do with the water and the touch block app that makes all the system crashed? LOL! I really don't know.
Can anyone please help me with this problem? I will really appreciate it. I was thinking now to surrender it and take a new one since it is still covered by the warranty. But I bougth this phone on Dubai and I am from Philippines it will not be easy so my last resort will be consulting you guys here or went to a local sony store.Yeah! so I went to our local sony store, here was the consultation ended. They say they will not receive any foreign units as of for warranty. They can repair it though but it will cost a lot since it will be treated as not under warranty. And the process is very slow here I can tell. They need to shiped my unit to our capital City which is in Manila, I am from Davao City by the way. I show them my warranty card and explained what happen and they said the only thing I can do for now is to avail the repairs costs or I can send this back through the shop in Dubai. And now here I am trying to contact the guys from Dubai.
Its funny because when I read the terms and conditions on the warranty card it say's:
(What is not covered: The warranty does not cover battery, accessories, damage to the product by any including accidents, contact with water/liquid/spray/humidity, electricity surge, impact, fire, sand. The warranty also excludes damage due to regular wear and tear. )
I am not sure whether they want to fix or not. LOL! And in my case this terms where really applied. Anyway I will try to email them what can they say about this problem of mine. -
I am performing content conversion on a file in the file receiver adapter. Everything works well but one item. My xml is set up as
<ns0:MT_Delivery xmlns:ns0="http://abc.com">
<Header>
<BOF>$BOF 20111220</BOF>
</Header>
<BOB>
<BOB>
<BOBItem>$BOB</BOBItem>
<OH>
<record_type>OH</record_type>
<origin_code>1701</origin_code>
<order_no>0030001031</order_no>
</OH>
<ThreePICO>
<record_type>3P</record_type>
<party_code>C1</party_code>
<company_name>CHS INC</company_name>
<company_name2>Plant City Sales</company_name2>
</ThreePICO>
<RFPO>
<record_type>RF</record_type>
<reference_code>PO</reference_code>
<reference_dscr>A.05</reference_dscr>
</RFPO>
<RFCustPO>
<record_type>RF</record_type>
<reference_code>xs</reference_code>
<reference_dscr>A.05</reference_dscr>
</RFCustPO>
</BOB>
</BOB>
</ns0:MT_Delivery>
This is ~ delimited.
My content conversion data is set up as:
Recordset = Header,BOB,OH,ThreePICO,RFPO,RFCustPO
fieldNames for Header = BOF
fieldNames for BOB = BOBItem
fieldNames for OH = record_type,origin_code,order_no
fieldNames for ThreePICO = record_type,party_code,company_name,company_name2
fieldNames for RFPO = record_type,reference_code,reference_dscr
fieldNames for RFCustPO = record_type,reference_code,reference_dscr.
When my file is created, I get the following
$BOF 20111120
$BOBOH1701~0030001031
3PC1CHS Inc~Plant City Sales
RFPOA.05
RFxsA.05
I don't understand while "$BOB" and "OH17010030001031" all show up on the same line. I've even tried to force a new line using 'nl' after the BOB segment, but no luck. Any ideas?hi,
have you writen any udf for removing delimiter in mapping level?
thanks, -
Help! install jdk in redhat 7.1 linux
I installed jdk1.3.1-02 in redhat7.1 ,and changed profile ,but when I type
java -version
it shows
Kaffe Virtual Machine
Copyright (c) 1996-2000
Transvirtual Techologies ,Inc ,All rights reserved
Engine:Just-in time v3 Version:1.0.6 Java Version :1.1
obviously ,it is not sun's jdk , if I want use sun's jdk ,how to do it ?hey
type following commands to find out where the kaffe is installed
1]
locate kaffe
OR
2]
find / -name kaffe
Or you can find out which kaffe rpm is installed by typing following command
rpm -qa | grep kaffe
after getting rpm file name you can simply uninstall the rpm by using
rpm -e <rpm-name>
OR
if you dont want to do that go to the executable file of kaffe
by saying vim kaffe
and comment the line that shows this message
try these options
i am sure one fo them will work
Nilesh -
Unresponsive Touchscreen problem on Lumia920
Hi.
I have this problem. Unresponsive touch screen but the side buttons do work. now, I've managed to give it some time to observe the situation and I found out that this happens when the phone is heating up a tad bit. It could be the processor or the battery. It started when I was playing with it for about an hour with some 3D game. After I played the game, I screen locked my phone. There on, when I tried to use it again, the touch screen was unresponsive.
I did try the soft and hard resets but it doesn't work until my phone finally cooled to normal room temperature. I tried observing it for three weeks and every time the phone heats it's always coming to that point where the screen goes unresponsive. I tried to work on it with the resets when it cools down then it's good, again. But now, a 5 degrees change in temp near the battery and processor would make the screen unresponsive.
I have questions though:
1. Here in the Philippines, Davao City in particular, I went to a "registered" Nokia Care center and I was told that if they find out by "phone diagnostics" that the cause of the unresponsive touch screen is due to "mishandling" like being dropped or scratched or whatever,they will consider the warranty void and they would charge me for everything regarding the repairs needed. Is this somehow true?
2. Phone diagnostics will take them 2-3 days and will only notify me about their "results". This means it's not an "on the spot" diagnostic which led me to think that a biased diagnosis might come up. As much as I want to trust the said "registered Nokia Care center", there seems to be a void in their policy. They would even charge me for the said diagnostic. Is this even fair?
This is somewhat frustrating as it would look like I have bought a phone with no warranty at all. Please do help me.Hi kingk0ng042487,
Welcome to the Nokia Support Discussions.
Assuming that you have the same concern with kingk0ng0424, let me answer your concerns in the same manner that you have presented them:
1. 1. Here in the Philippines, Davao City in particular, I went to a "registered" Nokia Care center and I was told that if they find out by "phone diagnostics" that the cause of the unresponsive touch screen is due to "mishandling" like being dropped or scratched or whatever,they will consider the warranty void and they would charge me for everything regarding the repairs needed. Is this somehow true?
- Any form of physical damage will void the phone's warranty. The consumer will need to pay for the assessment fee, labor fee of the technician and the repair, if he/she wishes to proceed.
2. 2. Phone diagnostics will take them 2-3 days and will only notify me about their "results". This means it's not an "on the spot" diagnostic which led me to think that a biased diagnosis might come up. As much as I want to trust the said "registered Nokia Care center", there seems to be a void in their policy. They would even charge me for the said diagnostic. Is this even fair?
- The repair is "first come, first serve" basis. The duration will depend on the number of phones for the assessment on the technician's queue. If the phone warranty is voided, the consumer will be asked to pay for the assessment fee and other fees associated with the repair.
For more information about the Nokia Manufacturer's warranty, please see this:
http://download.fds-ncom.nokia.com/supportFiles/phones/files/pdf_guides/services/warranty/Warranty_t...
Hope this helps. -
FileWriter: Go to Next line...
Hi All!
Good day! I would like to ask how to go to the next line using FileWriter's write() method.
Since there is no writeln() method, how would I go to the next line?
Any Idea? If I will use "\n" it will display something like a square character...
Thank you and God Bless,
Borgy Manotoy
Davao City - PhilippinesI would like to create a log file for the program I
am running... do you have a better idea how to handle
this?�http://java.sun.com/j2se/1.5.0/docs/guide/logging/overview.html -
How to? Video driver update, MacAir 2011. (Cim City video error)
Hi...
Can't play Sim City on my Mac Air mid 2011 OSX 10.7.5 with Intel HD 3000 graphics due to green stripes over the game screen.
Anybody know how to update the driver?
I tried Intel's automatic detection service, but it failed.
Any ideas?>a nice NVidia card... Please help Adobe!
1a - what is the model nVidia card, and what is your driver version?
1b - for instance, I have a GTX 285 and driver 296.10
2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
2b - how to contact Adobe...
Adobe contact information
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7 -
IS COMPUTER FIX, INC A 3rd party Independent Tech Support Provider FOR APPLE? THEY CHARGED AS 339.00 DOLLARS TO REMOTELY REPAIR OUR MACBOOK
If you paid by credit card, contact the bank handling this payment
and ask that it be stopped since the provider did not actually do
anything to the computer and you are suspicious of their actions.
If the billing was added to a phone account, contact the vendor of
that service to dispute the charges against you; and cite concerns
of security, identify theft, privacy and of being scammed.
You may have to fill out forms, and see if the credit card bank will
refund or not; usually they mail them to your billing address, after
you call the bank customer service. Some are better at than others.
This could take some months to resolve, if you paid that way.
They may also have installed (or had you remove security) while
inside your Mac and its system software, remotely. If they were
able to 'scan' your Mac remotely, they may have harvested any
personal or financial information, including passwords saved to
online accounts that may have been in browsers or keychain.
On another track, complete repaired Macs of an older vintage
are not very expensive; even ones from companies who repair
them or those who have stock of repaired units...
While checking for a friend, online I found a few portables that
had been repaired and for sale by a company whose business
is to repair almost all portable Apple computers, in-house.
You can buy an early model guaranteed MacBook from reputable
repair companies with limited warranty for under $400. and that
includes a bill-of-health with an option to buy a longer warranty
for a little bit more. Or just mail in your computer in a flat-rate
postal carton with padding, to one of the well-reputed repairers
directly. They perform a physical/software hands-on diagnostic
& repair service, tell you before they fix anything what it will cost,
what the price variables are when they do hands-on testing; as
that is a real repair. An example: wegenermedia.com online.
The Apple support site has links to the better known AASP
authorized Apple service providers, and you could look up
the ones nearest your City & Country in the Locate section.
Blue links below require additional info once in their Site to
access the Authorized Apple Service Providers who have
an actual physical presence, where they offer services..
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Apple - Find Locations - Country Selector:
https://locate.apple.com/country
Contact Apple Support - Apple Support:
http://www.apple.com/support/contact/
Some independent providers may be in a situation to do more or
even less, than an Authorized service provider. Some may just
repair computers -- and not officially be affiliated with Apple...
Best to do the necessary research before committing to repair.
In any event...
Good luck & happy computing! -
Hi All,
I had installed P6 8.3 with weblogic 10.3.6.
My Adminserver is running.
But when i am starting my managed server P6, P6 server is getting started but P6 application is failing to start and giving above error.
but my p6help web application is showing Active state.
I added below line in startWeblogic.cmd and setDomainEnv.cmd file but no use.
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dprimavera.bootstrap.home=C:\P6EPPM_1\p6\
I tried by redeploying p6 application but still same error.
Please help.Hi,
I has set the classpath as well same as above.
If i start managed server manually or using start_primavera.bat, P6 application is becomeing acive and working.
But if i start managed server using windows service, Managed server is get started, p6help is also becoming active but only p6 is failing to start.
If i chek the log it is showing same log below,
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Locating method "public static void main([]String)" in main class
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Building arguments for main class
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Invoking main class
<Oct 30, 2013 4:08:54 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Oct 30, 2013 4:08:54 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 30, 2013 4:08:54 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.45-b01 from Sun Microsystems Inc.>
<Oct 30, 2013 4:08:55 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Oct 30, 2013 4:08:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 30, 2013 4:08:56 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 30, 2013 4:08:56 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\Primavera\servers\P6\logs\P6.log is opened. All server side log events will be written to this file.>
<Oct 30, 2013 4:08:57 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 30, 2013 4:08:59 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 30, 2013 4:08:59 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 30, 2013 4:09:00 PM IST> <Warning> <HTTP> <BEA-101377> <Filtering class loader configuration ignored for web module p6.war of application p6>
Oct 30, 2013 4:09:03 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing JavaServer Faces implementation (1_2_07-b03-FCS) for context '/p6'
- Refreshing com.primavera.bre.SystemApplicationContext@7fc4fe21: display name [com.primavera.bre.SystemApplicationContext@7fc4fe21]; startup date [Wed Oct 30 16:09:05 IST 2013]; root of context hierarchy
- Loading XML bean definitions from class path resource [/com/primavera/pvweb/servlet/webconf.xml]
- Bean factory for application context [com.primavera.bre.SystemApplicationContext@7fc4fe21]: org.springframework.beans.factory.support.DefaultListableBeanFactory@35f5e42b
- Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@35f5e42b: defining beans [metaConfigProvider,settingsManager,adminManager,LogMgr,performanceManager,threadPool,remoteQManager,subSystemInitializer,sqlConnectionPoolManager,registryService,tracer,mailService,configDumpHelper,autoConfigCollectionTask,proxiedUrlOpener,systemFacade,autoStarterService]; root of factory hierarchy
System property 'primavera.bootstrap.home' not found
<Oct 30, 2013 4:09:07 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.primavera.pvweb.listeners.PVContextListener failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registryService' defined in class path resource [/com/primavera/pvweb/servlet/webconf.xml]: Invocation of init method failed; nested exception is com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found.
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registryService' defined in class path resource [/com/primavera/pvweb/servlet/webconf.xml]: Invocation of init method failed; nested exception is com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1338)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
Truncated. see log file for complete stacktrace
Caused By: com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found
at com.primavera.common.BootstrapHome.get(Unknown Source)
at com.primavera.infr.admin.MetaCfg.a(Unknown Source)
at com.primavera.infr.admin.MetaCfg.getMetaJDBCURL(Unknown Source)
at com.primavera.infr.srvcs.RegistryServiceImpl.init(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace -
Leslie sent me these new opening - check them out! Also, I'm going to take a few minutes here soon and post a list of recruiters I have worked with and have been successful getting me into interviews.
Here is the message from Leslie Myers:
Information Systems Specialist Full Time, and Information Systems Specialist Part Time, at Liberty, MO City Hall.
If you or someone you know might be interested in one of the positions, encourage them to visitwww.ci.liberty.mo.us/jobs.
Let me know if you have questions.
Leslie Myers
[email protected]
This topic first appeared in the Spiceworks CommunityJust seen this Wildman an i might have seen this back in Nov. but can't remember i would like to see LTE here in our small Community it would be really nice. And those speeds look really Good.. On my X pulling from Fort Hays State it Pinged 59ms 12.34Mbps an uploaded at 3.24Mbps An when i Tested from Independence it Pinked 70ms 11.20Mbps an Uploaded 3.36Mbps. Now for my Incredible Using Wi-Fi an using The Independence Server it Pinged 75ms DL 10.12Mbps an UL at 7.44 An when i tested it with the Fort Hays Server it Pinged at 52ms an DL at 13.76Mbps an UL at 8.43 Mbps. Just for oops an grins i tested with one more server an the one that a Cox Service Teck Suggested it was the one in Lawrence Ks. My Inc. Pinged it at 109ms DL at 15.36Mbps an UL at 8.29 Mbps Not bad for an Old Dog that's over a year old.. Now for the P.c. it Pinged the Independence server at 58ms an DL at 27.21Mbps but it could only muster a 4.29 UL-Speed My Droids spanked it in that Area for sure.
-
HELP !!! Batman Arkham City GOTY crashes.
Process: Batman Arkham City GOTY [1013]
Path: /Applications/Batman Arkham City GOTY.app/Contents/MacOS/Batman Arkham City GOTY
Identifier: com.feralinteractive.bmac
Version: ???
App Item ID: 561687003
App External ID: 85032818
Code Type: X86 (Native)
Parent Process: ??? [1]
Responsible: Batman Arkham City GOTY [1013]
User ID: 501
Date/Time: 2015-04-02 20:50:34.362 +0530
OS Version: Mac OS X 10.10.2 (14C1514)
Report Version: 11
Anonymous UUID: DD403996-CB1E-37F4-4D7B-4B6438114DEB
Time Awake Since Boot: 4600 seconds
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
Referenced from: /Applications/Batman Arkham City GOTY.app/Contents/MacOS/Batman Arkham City GOTY
Reason: no suitable image found. Did find:
/System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
/System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Binary Images:
0x8fede000 - 0x8ff11e03 dyld (353.2.1) <06B1254D-9BB9-327C-BA15-8F18FFF97586> /usr/lib/dyld
0x9024a000 - 0x9024afff com.apple.audio.units.AudioUnit (1.12 - 1.12) <64ED443E-25D5-3A2C-A028-0D0C7FAF57C6> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x96d1b000 - 0x96d70ff3 com.apple.audio.CoreAudio (4.3.0 - 4.3.0) <F5A586C3-A440-3E0E-966A-7841A182E5B2> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x99d5f000 - 0x99eeaffb com.apple.audio.toolbox.AudioToolbox (1.12 - 1.12) <44BCEAB8-306D-307F-92C8-6656F3578220> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.159.13.12)
Bluetooth: Version 4.3.2f6 15235, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1Hi FJBM102800,
I'm having the exact same problem the game wouldn't even start and the icon just keeps bouncing on the dock for minutes, did you find a solution for this?? -
LTE in KANSAS CITY!!!! UP AND READY
Just noticed that Verizon appear to have brought Kansas City LTE online, my device is holding a solid 4G signal now...
Just seen this Wildman an i might have seen this back in Nov. but can't remember i would like to see LTE here in our small Community it would be really nice. And those speeds look really Good.. On my X pulling from Fort Hays State it Pinged 59ms 12.34Mbps an uploaded at 3.24Mbps An when i Tested from Independence it Pinked 70ms 11.20Mbps an Uploaded 3.36Mbps. Now for my Incredible Using Wi-Fi an using The Independence Server it Pinged 75ms DL 10.12Mbps an UL at 7.44 An when i tested it with the Fort Hays Server it Pinged at 52ms an DL at 13.76Mbps an UL at 8.43 Mbps. Just for oops an grins i tested with one more server an the one that a Cox Service Teck Suggested it was the one in Lawrence Ks. My Inc. Pinged it at 109ms DL at 15.36Mbps an UL at 8.29 Mbps Not bad for an Old Dog that's over a year old.. Now for the P.c. it Pinged the Independence server at 58ms an DL at 27.21Mbps but it could only muster a 4.29 UL-Speed My Droids spanked it in that Area for sure.
-
The following error is occurring while initiating the workflow in P6 R8.2 of Web Access (My Workflows tab is not working).
ERROR com.primavera.infr.srvcs.bpm.BPMNServiceImpl ?:? BPM service could not connect to BPM Identity service provider for database 1
ORABPEL-10585
Service error.
Internal Error; Service error occurs in BPMIdentityService in method authenticateUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1111)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1122)
at com.primavera.bpm.BPMServiceManager.getIdentityService(BPMServiceManager.java:226)
at com.primavera.bpm.BPMConnectorImpl.getInitiatableProcesses(BPMConnectorImpl.java:330)
at com.primavera.bpm.BPMConnectorImpl.getCompositesForDefaultPartition(BPMConnectorImpl.java:417)
at com.primavera.bpm.BPMConnectorImpl.getBPMProcessNodes(BPMConnectorImpl.java:387)
at com.primavera.infr.srvcs.bpm.BPMNServiceImpl$1.command(Unknown Source)
at com.primavera.infr.srvcs.bpm.BPMNServiceImpl$1.command(Unknown Source)
at com.primavera.bpm.common.BPMCommandRunner$a.run(Unknown Source)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.bpel.services.workflow.client.WorkflowServiceClientException: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:287)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.authenticateUser(IdentityServiceSOAPClient.java:622)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1093)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1123)
at com.primavera.bpm.BPMServiceManager.getIdentityService(BPMServiceManager.java:226)
at com.primavera.bpm.BPMConnectorImpl.getInitiatableProcesses(BPMConnectorImpl.java:332)
at com.primavera.bpm.BPMConnectorImpl.getCompositesForDefaultPartition(BPMConnectorImpl.java:419)
... 5 more
Caused by: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:166)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.getPort(WSDLMetadata.java:429)
at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.createDispatch(ServiceDelegateImpl.java:275)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.createDispatch(IdentityServiceSOAPClient.java:231)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:271)
... 11 more
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=CONFIGURATION_ERROR: Problem instantiating factory implementation.: java.lang.ClassNotFoundException: oracle.webservices.wsdl.WSDLFactoryImpl
at javax.wsdl.factory.WSDLFactory.newInstance(Unknown Source)
at oracle.j2ee.ws.common.wsdl.WSDLHelper.getWsdlReader(WSDLHelper.java:88)
at oracle.j2ee.ws.common.wsdl.WSDLHelper.getWsdlReader(WSDLHelper.java:85)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.readWsdlDefinition(WSDLMetadata.java:354)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPortsFromWsdl(WSDLMetadata.java:197)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:164)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.getPort(WSDLMetadata.java:429)
at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.createDispatch(ServiceDelegateImpl.java:275)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.createDispatch(IdentityServiceSOAPClient.java:233)
... 12 more
Caused by: java.lang.ClassNotFoundException: oracle.webservices.wsdl.WSDLFactoryImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
... 21 more
*[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' ERROR com.primavera.pvweb.pm.workflows.BPMAjaxProvider ?:? Failed loading BPM processes.*
com.primavera.bpm.common.BPMServiceException: BPM service could not connect to BPM Identity service provider for database 1
at com.primavera.bpm.BPMServiceManager.getIdentityService(BPMServiceManager.java:233)
at com.primavera.bpm.BPMConnectorImpl.getInitiatableProcesses(BPMConnectorImpl.java:332)
at com.primavera.bpm.BPMConnectorImpl.getCompositesForDefaultPartition(BPMConnectorImpl.java:419)
at com.primavera.bpm.BPMConnectorImpl.getBPMProcessNodes(BPMConnectorImpl.java:387)
at com.primavera.infr.srvcs.bpm.BPMNServiceImpl$1.command(Unknown Source)
at com.primavera.infr.srvcs.bpm.BPMNServiceImpl$1.command(Unknown Source)
at com.primavera.bpm.common.BPMCommandRunner$a.run(Unknown Source)
at java.lang.Thread.run(Thread.java:662)
Caused by: ORABPEL-10585
Service error.
Internal Error; Service error occurs in BPMIdentityService in method authenticateUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1111)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1122)
at com.primavera.bpm.BPMServiceManager.getIdentityService(BPMServiceManager.java:226)
at com.primavera.bpm.BPMConnectorImpl.getInitiatableProcesses(BPMConnectorImpl.java:330)
at com.primavera.bpm.BPMConnectorImpl.getCompositesForDefaultPartition(BPMConnectorImpl.java:417)
... 5 more
Caused by: oracle.bpel.services.workflow.client.WorkflowServiceClientException: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:287)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.authenticateUser(IdentityServiceSOAPClient.java:622)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1093)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1123)
at com.primavera.bpm.BPMServiceManager.getIdentityService(BPMServiceManager.java:226)
at com.primavera.bpm.BPMConnectorImpl.getInitiatableProcesses(BPMConnectorImpl.java:332)
at com.primavera.bpm.BPMConnectorImpl.getCompositesForDefaultPartition(BPMConnectorImpl.java:419)
... 5 more
Caused by: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:166)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.getPort(WSDLMetadata.java:429)
at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.createDispatch(ServiceDelegateImpl.java:275)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.createDispatch(IdentityServiceSOAPClient.java:231)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:271)
... 11 more
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=CONFIGURATION_ERROR: Problem instantiating factory implementation.: java.lang.ClassNotFoundException: oracle.webservices.wsdl.WSDLFactoryImpl
at javax.wsdl.factory.WSDLFactory.newInstance(Unknown Source)
at oracle.j2ee.ws.common.wsdl.WSDLHelper.getWsdlReader(WSDLHelper.java:88)
at oracle.j2ee.ws.common.wsdl.WSDLHelper.getWsdlReader(WSDLHelper.java:85)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.readWsdlDefinition(WSDLMetadata.java:354)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPortsFromWsdl(WSDLMetadata.java:197)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:164)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.getPort(WSDLMetadata.java:429)
at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.createDispatch(ServiceDelegateImpl.java:275)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.createDispatch(IdentityServiceSOAPClient.java:233)
... 12 more
Caused by: java.lang.ClassNotFoundException: oracle.webservices.wsdl.WSDLFactoryImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
... 21 more
Edited by: user4883812 on Feb 1, 2012 6:09 AMLooks like you are missing wsclient.jar .
See this - Problem instatiating factory implementation when invoking a service in java -
Error install windows 8.1 on a 2010 macbook pro 13 inc
hi.
i am trying to install windows 8.1 on a 2010 macbook pro 13 inc
i have now successfully make bootcamp show the option to create a windows 7 install disk how ever it does not show the other part of create windows 7 or “later version” install disk .
and also i get an error when making a windows 8.1 bootable disk which says
“boot camp only supports windows 7 installation on this platform.plz use an iso file for windows 7 installation””
need help plzz
thank you
—–afrah—-
Message was edited by: afrah000Welcome to Apple Support Communities
Although you managed to "hack" Boot Camp Assistant and you can create a Windows USB installer, you will not be able to boot from the USB drive and you will get a nice "No bootable device" screen after restarting your Mac.
Apple has set up Boot Camp Assistant in order to show the option to create a USB installer only in Macs which support it. In the case of the MacBook Pro, only MacBooks Pro with Retina display support that option, so you are out of luck. You need Windows on a DVD. -
Company: V I Engineering, Inc.
Locations: Various - USA
Salary/Wage: $negotiable
Status: Hourly Contractor
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience required)
Career Level: Intermediate/Experienced
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer Contractor to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have very high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design, development and installation of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box. You will be available to spend extended periods at our customer sites to complete system installations.
Required
5+ years of Systems Integration experience
3+ years LabVIEW experience
1+ years TestStand experience
Experience in Implementation and Delivery of Test Systems, including integration
Experience in ATE usage and development
Experience in building and Integrating Mechanical Fixtures
Experience in Understanding the design of Circuit Boards as they relate to a total system, and their fault-finding
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience
TortoiseSVN
V I Package Manager (VIPM)
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 50%.
V I Engineering, Inc. offers a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer (Contract) employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.Edit
Jeff
Maybe you are looking for
-
Since I installed the last update, ITunes no longer finds my iPhone when it is pluged in my laptop. I can longer sync my calander and Outlook! Why is that and can this be fix?
-
Payment Advice for Payment method T- Transfer
Hi, When I run F110 (Automatic payment program), I need to provide the payment advice for payment method T (bank transfer) to the vendor in the format provided by the client. My question is: 1. Where to assign the payment advice form in customisatio
-
Workitem text in SAP Business Workflow
Hi guys, We are using SRM 5.0. We defined a Workitem text in a Workflow task,and want this text to appear in the external mail of the user. The mail with the workitem reached the external mail of the approval user. The text however does not appear in
-
SWF TO .FLA???
Hi all: Suppose I have a swf file and I want to obtain the .fla file and the actionscript .as files that generated that swf file, Is it possible? How? a tool? And one more question Can I interact with SIM native properties ( like reading ID data...)?
-
Error in notification creation
Hi My requirement is, create the Notification (IW21) by using the call transaction in synchronous mode after creates the notification I have to do some other updating. I complete the code and also it is working fine but some