Primavera 6v8.3 SP3 for MS SQL?

I am trying to apply SP3 to my PMDB MS SQL instance. I browse and find the 3 following matches below.
So the only relevant one is the first "Oracle Primavera P6 R8.3 SP3 (Patch)"
I go to the readme.html and find this:
"This patch for P6 can be used only with an Oracle Primavera P6 EPPM Release 8.3.3.0 database (Oracle and Microsoft SQL Server are supported)."
No idea why it indicates it can only be used with 8.3.3.0 database but ignoring that, where is the documentation for P6v8.3 MS SQL? I found the MS SQL database scripts in that download package but I don't see any documentation for upgrading MS SQL.

Hi,
The steps are noted in the Upgrading the Database section in the Readme file. Basically you just need to executed the sql script and then run dbsetup.bat/sh.
If you have access to MOS, you can also use My Oracle Support Community: Primavera - PRIM (MOSC)

Similar Messages

  • Issue With Report Builder After Installing SP3 for SQL 2008 R2

    Hello.  We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend.  You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
     Application url   :
    http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
    IDENTITIES
     Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
     Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
    APPLICATION SUMMARY
     * Online only application.
     * Trust url parameter is set.
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
      + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [10/15/2014 9:35:56 AM] : Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
     * [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
     * [10/15/2014 9:36:29 AM] : Installation of the application has started.
     * [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
     * [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
      - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
       at System.Deployment.Application.ComponentVerifier.VerifyComponents()
       at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
    notification, DownloadOptions options)
       at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
       at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.

    Hi DMcGarveyt,
    This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
    Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • JDBC for MS SQL Server 2000

    Hi all, i'm newbie here and i have some problems doing with Java for my Final Project, just for my graduation...
    Here's the problem ...
    First i install the JDK 1.5 and MS SQL Server 2000. And then i also install JDBC for MS SQL Server 2000 sp3. Than i'm doing some experiments with JDBC, but its result error that i couldnt understand how to fixed it...
    I'm asking is JDBC for MS SQL Server 2000 sp3 doesn't support j2ee 1.5.0 and where i can find native driver jdbc for MS SQL Server 2000.
    Please help me....

    Than i'm doing some experiments with JDBC, but
    its result error that i couldnt understand This is the most important part of your post yet you don't seem to recognize it as such.
    Tell us what the error is. Not what you think it is. Exactlly what it says. And please provide a relevent, formatted snippet of code.

  • Help -- sql 2008 SP3 (x64) and sql 2012 R2 SMO

    We have a sql 2008 x64 sql server with SP3. We need to upgrade a third-party app (related to our SAN) and it needs to install
    a. Microsoft Visual C++ 2012 Redistributable Package (x64)
    b. Microsoft SQL Server 2012 CLR Types (x64)
    c. Microsoft Sql 2012 R2 Management Objects (x64)
    Are there any known compatibility issues installing these on a sql 2008 SP3 server?
    TIA,
    edm2

    Hello,
    The components you post above are stand-alone packages that provide additional value for Microsoft SQL Server 2012. The installation of these components will not effect the previous installed SQL Server instance.
    SQL Server Management Objects (SMO) is a .NET Framework object which can will work with SQL Server 2005, SQL Server 2008, SQL Server 2008 R2, and SQL Server 2012. You can download the SQL Server Management Objects (SMO) and the requisite CLR Types from
    the following link:
    Microsoft® SQL Server® 2012 SP1 Feature Pack
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • XDK for PL/SQL vs XDK for Java

    Hi ,
    I am trying to find what version of XDK and whether it is for java or PL/SQL. I am confused after what I saw in our environment. Please clarify..
    When I run the getReleaseVersion() and do a
    select xmlversion from dual,
    I get
    Oracle XDK Java 9.0.1.1.0A Production
    Does this mean we have XDK for Java? not for PL/SQL?
    I also see PL/SQL packages for XMLDOM,XMLGEN.XMLPARSER,XSLPROCESSOR,DBMS_XMLQUERY,DBMS_XMLSAVE.
    Does this mean I have/not XDK for PL/SQL??
    Please clarify.

    XDK for PL/SQL is built based on XDK for Java. So that's why you got the result. It should also reflect the version you use.

  • Using an NDS statement for a SQL stament run only once in a proceudure

    Hi,
    We're using Oracle 11.1.0.7.0.
    I'm going through code written by someone else. In this package they're using NDS for every SQL call whether it gets called multiple times or just once. Is that a good thing?
    I thought NDS was only reserved for SQL statements that get called over and over again in a procedure with possible varying 'WHERE clause' variables and so on...
    Is there ANY benefit to using NDS for SQL queries called only once in a procedure?
    Thanks

    There is no benefit unless you want to turn PL/SQL into SQL*Plus (parse once, run once)
    Procedures exist to make sure : parse at compile time, run many times.
    The code is shooting itself in its own foot.
    Or the developer must have got hold of Tom Kyte's unpublished one chapter book 'How to write unscalable applications'.
    Sybrand Bakker
    Senior Oracle DBA

  • Loading XML parser for PL/SQL

    I am working my way thru 'Building Oracle XML Applications' by Steve Muench.
    I am getting a problem when I try to install the XML parser for PL/SQL
    The following errors occur when I try to do
    loadjava -v -r -u xmlbook/xmlbook xmlparserv2.jar
    initialization complete
    loading : oracle/xml/parser/v2/XMLByteReader
    creating : oracle/xml/parser/v2/XMLByteReader
    Error while creating class oracle/xml/parser/v2/XMLByteReader
    ORA-29545: badly formed class: User has attempted to load a class (oracle.xml.parser.v2.XMLByteReader) into a restricted package. Permission can be granted using dbms_java.grant_permission(<user>, LoadClassInPackage...
    loading : oracle/xml/parser/v2/PrintDriver
    creating : oracle/xml/parser/v2/PrintDriver
    Error while creating class oracle/xml/parser/v2/PrintDriver
    ORA-29545: badly formed class: User has attempted to load a class (oracle.xml.parser.v2.PrintDriver) into a restricted package. Permission can be granted using dbms_java.grant_permission(<user>, LoadClassInPackage...
    resolving: oracle/xml/parser/v2/PrintDriver
    Error while resolving class oracle/xml/parser/v2/PrintDriver
    ORA-04043: object /a065289c_PrintDriver does not exist
    resolving: org/w3c/dom/html/HTMLAnchorElement
    Error while resolving class org/w3c/dom/html/HTMLAnchorElement
    ORA-04043: object /564607d_HTMLAnchorElement does not exist
    About 20 classes get loaded correctly. All the rest get ORA-29545 or ORA-04043 errors.
    I expect the ORA-04043 errors are a result of the earlier errors.
    The documentation seems to indicate that there is no need to do
    dbms_java.grant_permission to load into your own schema.
    I have NT4 (sp6)
    Oracle 8.1.7
    xmlparserv2.jar dated 24/8/2001 17:01 size 1,177,259
    xmlparserv2_2027.jar gives the same errors.
    Any help would be appreciated.
    null

    Was it definitely xmlparsev2.jar that you had to load?
    I recently started going through some of these examples as well and found that the standard xml parser was there but that I needed to load the xml parser for PL/SQL. I did this using loadjava from a subdirectory within the xdk directory and everything worked fine.

  • Using DB Adapter for MS SQL Server 2005  SP in OSB 11g.

    Hi All,
    I have a requirement to create a DB Adapter for MS SQL Server Stored Procedure in JDeveloper and export the Adapter file to OSB 11g. I have Created the Adapter and imported it into OSB 11g successfully. Created the Datasource and Connection pool also in console.
    The problem is while trying to execute the created business Service, I am getting the error as below,
    <Oct 26, 2012 12:20:25 PM IST> <Error> <JCATransport> <BEA-381967> <Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/Test/CheckAppID/WL_Driver/CheckAppId_WL_Driver [ CheckAppId_WL_Driver_ptt::CheckAppId_WL_Driver(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'CheckAppId_WL_Driver' failed due to: Unimplemented string conversion.
    Conversion of JDBC type to String is not supported.
    An attempt was made to convert a Java object to String using an unsupported JDBC type: .
    ; nested exception is:
         BINDING.JCA-11804
    Unimplemented string conversion.
    My XSD is ,
    <element name="InputParameters">
    <complexType>
    <sequence>
    <element name="application_id" type="int" db:index="1" db:type="INT" minOccurs="0" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <element name="OutputParameters">
    <complexType>
    <sequence>
    <element name="RowSet0" type="db:RowSet0_RowSet" db:type="RowSet0" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
    <element name="RowSet1" type="db:RowSet1_RowSet" db:type="RowSet1" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <complexType name="RowSet1_RowSet">
    <sequence>
    <element name="RowSet1_Row" minOccurs="0" maxOccurs="unbounded">
    <complexType>
    <sequence>
    <element name="cde" type="int" db:type="INT" minOccurs="0" nillable="true"/>
    <element name="msg" db:type="NVARCHAR" minOccurs="0" nillable="true">
    <simpleType>
    <restriction base="string">
    <maxLength value="255"/>
    </restriction>
    </simpleType>
    </element>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    <complexType name="RowSet0_RowSet">
    <sequence>
    <element name="RowSet0_Row" minOccurs="0" maxOccurs="unbounded">
    <complexType>
    <sequence>
    <element name="aaa" type="boolean" db:type="BIT" minOccurs="0" nillable="true"/>
    <element name="bbb" db:type="NVARCHAR" minOccurs="0" nillable="true">
    <simpleType>
    <restriction base="string">
    <maxLength value="10"/>
    </restriction>
    </simpleType>
    </element>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    I don't know why there is a datatype conversion error.
    Help me in resolving this.
    Regards,
    Nataraj R.

    Hi,
    I believe NVARCHAR is an unsupported type...
    The following document lists the supported data types for SQL Server stored procedures and functions... NVARCHAR is not in the list... :-(
    http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#CHDEBEEE
    Hope this helps...
    Cheers,
    Vlad

  • What are the best books to purchase for pl/sql programming?

    What are the best books to purchase for pl/sql programming?
    I am new to this field and I am looking for the best books to help me in pl/sql programming. Can someone please suggest?
    Thanks

    In my opinion one of the best to start
    Oracle PL/SQL Programming, Third Edition
    Steven Feuerstein

  • SSMA for My SQL v6.0 not connecting to MS SQL 2008R2

    Is SSMA for My SQL v6.0 not supporting SQL 2008 R2.
    Is this version not backward compatible. As while connecting to 2008R2 SQL i am getting the below message.
    "You cannot connect to an older version (SQL Server 2008) of target SQL Server from a higher version SSMA project (Project type = SQL Server 2014). Try creating another SSMA project of project type
    which matches the version of target SQL Server you are connecting to OR connect to a target SQL Server equal to SQL Server 2014.
    And if issue is there then which version of software will let me do that?

    Hi Shubhra,
    As indicated in this
    download link , SQL Server Migration Assistant v6.0 for MySQL supports SQL Server 2005 or higher version.
    According to the above error message, it seems that you create a SSMA project for SQL Server 2014. To implement the migration process from MySQL to SQL Server 2008 R2, please ensure that you choose “SQL Server 2008” type in the following screenshot when
    creating  SSMA project, then connect to SQL Server 2008 R2 and check if the error still occurs.
    There is also a blog about how to migrate from MySQL to SQL Server using SSMA for your reference.
    http://blogs.msdn.com/b/ssma/archive/2011/02/07/mysql-to-sql-server-migration-how-to-use-ssma.aspx
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • The deployment process seems to die or get stuck, iAS 6 SP3 for Solaris 8?

    When I deploy my application in iAS 6 SP3 for Solaris 8 the deployment process seems to die or get stuck. In the shell window i get the messages
    iasdeploy for iPlanet Application Server 6.0 SP3
    Connected to LDAP server on sstu15.auto.com port 389
    iPlanet Application Server is running in international mode
    sstu15:null
    sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
    sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
    After this nothing happens for a really long time.
    When starting the deployment I get in the beginning of kas.log two entries
    ADMIN-168: kas> deployment get log ''J2EEInstallEar''
    GDS-007: finished a registry load
    but suddenly the second line disappears and the only message I get is the first entry. I need to break the deployment process and kill the processes manually.
    When starting the application server I get two error messages:
    Connected to LDAP server on sstu15.auto.com port 389
    iPlanet Application Server is running in international mode
    Connected to LDAP server on sstu15.auto.com port 389
    iPlanet Application Server is running in international mode
    iPlanet Administrative Server
    Version 6.0 SP3, Build 20010704
    Copyright (c) 1996-1997 KIVA Software Corporation.
    Copyright (c) 1998-1999 Netscape Communications Corporation.
    Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp
    . All rights reserved.
    Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
    [14/Feb/2002 11:02:12:7] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
    [14/Feb/2002 11:03:08:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
    I think all processes starts OK, I get one for .kas and one for kas, one for .kxs and one for kxs and finally one for .kjs and one for kjs.
    Is someone familiar with this/these problem(s)?

    It seems you are deploying a very big application. Try to deploy this application with following command
    j2eeappreg <filename>
    It should work fine. It was a bug with iasdeploy command in iAS SP3 which had been fixed in iAS SP4.

  • Default Data Server for Hypersonic SQL in ODI 11g

    Hi All,
    I installed ODI 11g 11.1.1.6.0 for Win 7 with 10g DB R2 and WLS 10.3.5 successfully without any issues.
    Created DEV_ODI_REPO Repository also without any issues.
    Created Master Repository snpm1 and Work Repository as snpw1.
    Created the Agents (Physical and Logical) and tested successfully.
    Created the data servers for respective technologies
    1) Technology Oracle -
        Data Server - ORACLE_ORCL_LOCAL 
        Physical Schemas - SALES_DEV & SALES_PROD and
        Logical Schema as ORACLE_ORCL_LOCAL_SALES
    2) Technology FILE -
        Data Server - FILE_GENERIC
        Physical Schema - FILE_GENERIC.E:/oracle/Middleware/Oracle_ODI1/oracledi/demo/file
        Logical Schema - FILE_DEMO_SRC
    3) Technology - XML
         Data Server - XML FILE
         Physical Schema - GEO_D
        Logical Schema - GEO_DIM
    4) Technology - Hypersonic SQL
         Data Server - HSQL   (Is this the correct name or some other name is recommended ? )
         Physical Schema - HSQL_LOCALHOST_20001_Default and HSQL_LOCALHOST_20001_Default
        Logical Schema - HSQL_DEMO_SRC and HSQL_DEMO_TARG
    All the Mappings are done properly using Development & Production context for Physical and Logical Schemas.
    I am able to create the Models for Oracle, FIle and XML with successful Reverse Engineering (standard with development context )
    with all the data displayed correctly.
    The issue starts here
    The Main issue is for Hypersonic SQL where I am not able to get the Reverse Engineering.
    Technology - Hypersonic SQL  I have defined the data server as HSQL
    Is this correct data server or some other name for data server is suggested ?
    I am able to start the startdemo.bat file successfully opening the 3 dos prompt windows as
    a) Oracle DI Demo - Repository Server
    b) Oracle DI Demo - Source Server
    c) Oracle DI Demo - Target Server
    Later I make  entries on the JDBC tab od HSQL - Data Server as
    JDBC Driver : org.hsqldb.jdbc.JDBCDriver
    JDBC Url : jdbc:hsqldb:hsql://localhost
    Test Connection - ok with successful connection.
    Prior to this I already run the script created schemas and inserted data to the SRC_ tables in my 10g Database as
    ORDERS - containing the Tables as SRC_CITY, SRC_CUSTOMER, SRC_PRODUCT, SRC_REGION.....
    In the Designer I create a new Model as HSQL_SRC
    Technology - Hypersonic SQL
    Logical Schema - HSQL_DEMO_SRC as defined earlier in logical schema.
    Reverse Engineer Tab - Selected as Standard   Context selected as Development from drop down list.
    When I right click on HSQL_SRC model for reverse engineer, it executes, however it does not display any tables inserted
    as shown for ORDERS Schema.
    Please correct me where I am wrong in giving the name for data server ? or some other place.
    Thanks
    Ajaz

    Hi,
    according to docs
    http://docs.oracle.com/cd/E23943_01/integrate.1111/e12644/hypersonic_sql.htm#ODIKM590
    i see
    JDBC Driver: org.hsqldb.jdbcDriver
    JDBC URL: jdbc:hsqldb:hsql://<host>:<port>
    could you modify
    JDBC Driver : org.hsqldb.jdbc.JDBCDriver
    JDBC Url : jdbc:hsqldb:hsql://localhost
    according to docs?
    Thanks

  • C# Code Example for Configuring SQL 2005 Reporting Services?

    I have found the MSDN articles describing the classes, public methods, etc. for configuring SQL Server 2005 Reporting Services via WMI. I need to initially configure them and just do this:
    - Report Server Virtual Directory
    - Windows Service Identity
    - Web Service Identity
    - Database Setup
    - Email Settings
    - Execution Account
    Is there a C# code example that already exists putting together all of this? I didn't want to reinvent the wheel if I didn't need to.
    -Ed

    Jin,
    Thanks so much! This is great! Your work is awesome!
    I have a couple of issues that came up...
    1) CreateVirtualDirectory.vbs creates the virtual directory for the Report Server just fine. Now how do I distinguish a script to create the virtual directory for the Report Manager?
    2) I decided to go ahead and use what you did for scripting CreateApplicationPool (using http://msdn.microsoft.com/en-us/library/ms155349(SQL.90).aspx). I found the syntax is wrong here when I kept getting an error, so I put PowerShell on the server and pulled the following info:
    Name       : CreateApplicationPool
    MemberType : Method
    Definition : System.Management.ManagementBaseObject CreateApplicationPool(System.String Name, System.Boolean UseBuiltIn
                 Account, System.String Account, System.String Password)
    However, I'd like to use "NT Authority\NetworkService" or "Network Service" as the account (which is an option for the Builtin accounts when I us RSConfigTool.exe). This is the syntax I used:
    objInParam.Properties_.Item(
    "Name") = "ReportServer"
    objInParam.Properties_.Item("UseBuiltInAccount") = true
    objInParam.Properties_.Item("Account") = "NT Authority\NetworkService"
    objInParam.Properties_.Item("Password") = ""
    But I always get an error with a negative number for the HRESULT.
    Any ideas?-Ed

  • Reporting Services for Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0

    Hello,
    We are currently running:
    Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (Intel X86)   Apr 22 2011 11:57:00   Copyright (c) Microsoft Corporation  Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
    We would like to know what is required to configure Reporting Services for Microsoft SQL Server 2008 R2 Standard.  Is their a cost associated?  I need to inform our IT people what is needed.
    Looking forward to your reply, Linda

    Double post:
    http://social.msdn.microsoft.com/Forums/en-US/3e6c5d4e-228e-4a95-b017-4c20ec61cae4/reporting-services-sql-server-express-2008-r2?forum=sqlreportingservices
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Request for an sql to scan for a special character from the tables

    Hi Gurus
    request for an sql statement for finding the character (and replace with a single byte character ) which occupy
    multibytes(in a unidata char set database) the database which is yet to be migrated to unidata(multibyte) database
    any kind of help is highly apprciated
    Thanks in advance

    Query below will find all bulti-byte characters in string column:
    select  string_column,
            substr(string_column,column_value,1)
      from  some_table,
            table(
                  cast(
                       multiset(
                                select  level
                                  from  dual
                                  connect by level <= length(string_column)
                       as sys.OdciNumberList
      where lengthb(substr(string_column,column_value,1)) > 1
      order by string_column,
               column_value
    /SY.

Maybe you are looking for