Primavera Contracts management log number limit

Dear All
We are using Primavera Contract Management  Version 13.0.4.0 Build 2025 , The Log number in Correspondance Recived has been reached 10000 now , it is not auto generating the number , how we can enable auto generation after 10,000 
Thanks in advance

Hi,
Basically in Contract Management, auto increment fails after the previously defined range of numbers is reached so the application requires leading zeroes to auto increment to next sequential number.
Example:
In the Correspondence Sent log, if the first document number is 0001, then the last document number was 9999. 
When creating the 10,000th document, Contract Manager assigns the number as **** and the user needs to manually update the document number. Leading zeros have been removed from document number.
Workaround:
Restore the leading zeros in the document number. It is recommended to manually change the numbers of all existing documents in the specific log experiencing the issue.
Best regards,
Matías

Similar Messages

  • In Need of some Primavera contract management Study/Training/guide/material

    Hi,
    I am a student at University of Minnesota. I was looking if somebody had Contract manager v13 study/user guides or any material that can help a novice learn Primavera Contract Manager?
    I am willing to pay for the Shipping.
    Also can anybody Suggest me what books are good, or where should I start learning Contract manager?
    Thanking you,
    UTK
    Moderator Edit: email address removed. You do not want spam for the rest of your life.
    Edited by: rukbat on Jun 23, 2011 6:13 AM

    Hi,
    Thank you for your reply,
    I had already found the user guide, infact much easier way to download it is at http://www.oracle.com/technetwork/documentation/primaverapcm-087479.html
    The problem is this user guide jumps into too much CM terminology without creating a knowledge of it. I am having problems following the user guide.
    Has anyone found another book or presentations or videos that could help......
    All the power users should start posting videos on how to use contract management on youtube... It really does help a ton.

  • Primavera Contract Management 14 internet set-up

    i have Primavera Contract Management 14 set up for intranet access on my network. how do i set it up for intrenet access for my remote users?

    The domain name is registered with a DNS (Domain Name Server), which identifies a domain name with a unique ID i.e. IP address (A bunch of 4 groups of 3 digits each).

  • Primavera Contract managment take much time when open large PDF files.

    Dears,
    i have a big problem!
    i made integration between the PCM and sharepoint 2010 and make migration from the file system to sharepoint.
    the sharepoint database reach 355GB
    after that unfortunately, when i try to open large pdf attachment through PCM(Primavera Contract Managmnet) it take much time then whan was opened from the file server.
    i made everthing upgrde the RAM and processor but the problem still exists.
    please help!
    Edited by: 948060 on Sep 19, 2012 1:48 AM

    we start store attachment on 2007. all of these files are migrated to sharepoint 2010 now on the staging enviroment.
    but, we faced the performance issue as mentioned above.
    the large files (begin 5MB) take a lot of time to open through the PCM

  • Primavera Contract Management 13: On Win7x64

    We are migrating to Win7x64 Enterprise and I've ran into a problem. So far nearly everything is working great except the Print Preview or Print(top of web page). When creating a print preview the following error occurs: : Failed to generate to PDF file. DataStore.SaveAs() returned -1"
    Has anyone else received this error and determined a resolution?
    Thank you in advance,
    Marcos

    Contract Management 14 is tested and supported for use in a 64 bit environment while Contract Management 13 is only tested and supported for use in a 32 bit environment. However, Contract Management 13 can be installed into a 64 bit environment. The only issue that I ran into was printing did Not work correctly all the time. Since Contract Management 13 is not tested or supported for use in a 64 bit environment, getting support for any problems that you may run into will be difficult.
    There is an unofficial workaround for getting reports/forms to view on 64-bit machine by replacing specific dll files.
    see this thread: 64-bit Support - We Want it All, and We Want it Now!

  • I have a problem Installing Primavera Contract Management. When i was trying to deploy the application, it is showing me servlet starting failed.

    This is the error.
    Exception:
    [HTTP:101216]Servlet: "StartupServlet" failed to preload on startup in Web application: "exponline". java.lang.NumberFormatException: null at java.lang.Integer.parseInt(Integer.java:417) at java.lang.Byte.parseByte(Byte.java:151) at java.lang.Byte.parseByte(Byte.java:108) at com.primavera.exponline.common.base.CommonUtilities.init(Unknown Source) at com.primavera.exponline.servlet.StartupServlet.init(Unknown Source) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200) at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212) at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116) at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:149) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Hi Matias,
    Thank for replying. Can you please send me that (Doc ID 1332267.1). Thank you.

  • Primavera Contract managment take much time when open large files.

    Dear All,
    i need to stop or configure the Download File In Chunks when PCM get file from sharepoint because it take large time to downlaod the file.
    the deafult is 2048 and i need to increase this value or disable it.
    thanks

    we start store attachment on 2007. all of these files are migrated to sharepoint 2010 now on the staging enviroment.
    but, we faced the performance issue as mentioned above.
    the large files (begin 5MB) take a lot of time to open through the PCM

  • Primavera Contract Management Report services

    Hi every one,
    Please I am new in PCM and I want to know if is it possible to create report services in PCM using SSRS (MS tools). Or we have to use the oracle BI publisher.
    Thanks a lot

    The domain name is registered with a DNS (Domain Name Server), which identifies a domain name with a unique ID i.e. IP address (A bunch of 4 groups of 3 digits each).

  • Best Practices- Number of users in Contract Manager

    What is the best practices for the number of users operating in Primavera Contract Manager? We currently have v13.0.3.0

    There are no real limits to the number of users working in PCM, but your server(s) must be sized correctly to work effectively.  I've seen PCM instances with hundreds of users.  Sizing requirements is typically included with your installation materials; otherwise you may want to look at the knowledgebase for this document.

  • Contract Manager v 11 problems

    Our company purchased Primavera Contract Manager 11.0 a few years ago and never really used it.
    If possible I'm trying to get this running as a test server to make sure we can use it for our projects before upgrading to the current version.
    I'm installing on Windows XP SP3 and I'm getting a lot of errors.
    During installation I received this error.
    The populateGroups utility failed.
    Rerun this utility after this setup is finished.
    I can get to the local login web page but after entering the login info this comes up:
    The application's digital signature has an error. Do you want to run the application?
    I hit OK.
    The application requires and earlier version of Java. Do you want to continue?
    DetectPluginApplet
    I hit OK.
    But it never logs in. It just stays on this login page.
    When trying to use database wizard to update databases or creat new one I get the error:
    Database Server Error: Named Pipes Provider: Could not oepn a connection to SQL Server [53].
    So is there any hope of getting this running or do we have to spend $1K to be able to use this? The boss already spent $2500 so we would like to use
    Thank you for any advice.
    budgen

    Thank you very much.
    First off the maintenance support was let go in 2008. We'll have to purchase all those years and 2011 which cost about $1K which we'll do. I just want to get logged into the Application and show the boss what's possible first. I hope v.13 isnt' this difficult but I know I'm learning.
    Yes the populategroups utility now works without error.
    That EXPADMIN takes me a step further but after trying that login the message below shows up on the login page.
    "Cannot open database(s) EXPADMIN, CMDEMO, EXPADMIN, because it was created with a previous release. Please convert the database(s) to version 11.1 or contact your Contract Manager administrator."
    I thought I did that already but apparantly not.
    Updating the databases to 11.1 isn't very straight forward. Using the CA.exe is rather difficult. I get the error : "Database Server Error: Named Pipes PRovider: Could not open a connection to SQL server [53]."
    The CM service is stopped.
    Where do I get the Instance Name of the EXPADMIN? It's not in the InstallParameters.log as the others are.
    Here's the installParameters.log if that helps:
    Contract Manager Database Server:
    Database Vendor          - Microsoft SQL Server
    Group database name     - cmdemo
    Computer Name          - BARRY
    Port Number          - Will be obtained during the install
    Instance Name          - PRIMAVERA
    Username          - exp
    Password          - sql
    Primavera schedule database Server:
    Database Vendor     - Microsoft SQL Server
    Computer Name     - Barry
    Database Name     - dps_db
    Username     - privuser
    Password     - privuser
    URL          - http://192.168.0.195/myprimavera/comp/ShowProject
    Thanks again!

  • Integrating Contract Management 14.0 and BI Publisher

    Oracle Support has released this document on the support site. Some of you might find it helpful
    KM Doc ID: 1361214.1 - Integrating Contract Management 14.0 and BI Publisher
    Sachin

    There is also an Upgrade Advisor: note: 341.1 "Primavera Contract Management from 12.1 or Later to 14.0"

  • Help with Infomaker tool for editing Contract Manager Template

    I am new to Primavera Contract Manager (11i) and has been assigned with a task of editing one Submittals template on the system as the person who was handling it left the company.
    On doing some research I found out that it is done through the Infomaker tool and I was able to do so the test server.
    But on the live server, whenever I try to open the same template using Infomaker, it will ask to select the database, once we select the database which is Oracle 10 G express, it quits even without showing any error message.
    I tried creating a new user on Oracle to make sure it is not because of wrong user name and password, but what ever details we give, infomaker just quits when tried to connect to any database.
    Can you kindly help me to trace out the issue?

    Hi Suhas,
    The rule used in workflow template WS50100021 is a standard one. So try to find out that on what basis it is fetching the agents. It could be the case that the logic specified in the rule does not fulfill your requirement.
    The other reason could be that you have not specified the task as general. Please check if the agents tab is activated(green) in the task or not. If it is not you need to set the task as general.
    SOLUTION : if you want to get the workitem in your own SAP Inbox for testing purpose, you can set the WFINITIATOR as agent instead of that standard rule. This setting will send the workitem in your own SAP Inbox.
    Regards,
    Guddan

  • Is Service Number mandatory in Contract Management?

    Dear all,
    I am currently working with external vendor on Contract Management. We were told that service contracts in SRM will not work without service numbers (service master records) and it can't be configured.
    However, based on my MM experience, this can be configured in R/3. I need your expertise or advice on this matter. Is this a configurable item in Contract Management?

    Hello ,
    You dont need a service Number in Contract Management, select product type as service at the contact item lvel and it should work.
    Award points if useful.
    Cheers,
    Sid

  • Primavera Expedition 8.5 standalone with Sybase database on windows 32 bits. We need to upgrade existing expedition to Oracle contract manager 13.1.

    Primavera Expedition 8.5 standalone with Sybase database on windows 32 bits. We need to upgrade existing expedition to Oracle contract manager 13.1.
         We are unable to upgrade Sybase database version from 8.5 to 10.0 before migration to oracle database. Please share the path and details of convert.exe we are unable to find in the oracle contract manager 13.1 binaries files.
    How To: Upgrade Expedition 8.5 Sybase databases to 10.x in preparation for upgrade to Contract Management 13 (Doc ID 914273.1)
    Regards,
    Amit

    The convert.exe to which the article refers is in the v13 setup files, and not in 13.1.

  • Primavera expedition 8.5 upgrade to oracle contract manager 13.1

         Primavera Expedition 8.5 standalone with Sybase database on windows 32 bits. We need to upgrade existing expedition to Oracle contract manager 13.1.
         We are unable to upgrade Sybase database version from 8.5 to 10.0 before migration to oracle database. Please share the path and details of convert.exe we are unable to find in the oracle contract manager 13.1 binaries files.
    How To: Upgrade Expedition 8.5 Sybase databases to 10.x in preparation for upgrade to Contract Management 13 (Doc ID 914273.1)
    Regards,
    Amit

    The convert.exe to which the article refers is in the v13 setup files, and not in 13.1.

Maybe you are looking for

  • Vocal hardware advice for L8 - Apogee Duet?

    I realise this isn't strictly logic related, but value a lot the opinions & advice I've read here (& don't really use any other forums!!) so hope no one minds me asking... After a few years of remixing I'm looking to start recording original vocals s

  • I Cal Sync issue...The request for the account encountered an unexpected network error (error 60

    I have a Macbook Pro with OS 10.68 and cannot get my calendar to sync from Icloud.  All my other devices sync fine (Ipad, Iphone, Mac Tower...)  Any ideas on what is going wrong?  Thanks. Kimball Mitchell <Email Edited by Host>

  • Double-click in finder

    Is there a way to go to single-click to activate or select items in Finder? Thanks, Sterling

  • 6940 win't prints in word 2010.

    All of a sudden Word stopped printing my documents.  It seems to try to print one page, but it's bank. I can print from internet (Fireox) just fine. I tried prnting an Excel file with same results as Word. Any ideas what can be the issue. -=Mark=- ps

  • Webi Prompt Order

    I am trying to use the Rebean SDK to set the order of prompts in a XI3.1 SP3 Webi document.  This document does contain universe prompts, i.e. a table has a self join with @Prompt().  Looking through the Javadocs, I see a PromptOrder class, but it on