Primavera P6 v7 - SP1 vs SP2

A simple question. If I install the SP2, is neccesary the SP1, or SP2 cover SP1?.
Thank you very much.
JuanMax

JuanMax,
SP2 should include SP1 as well. You should be able to install SP2 without installing SP1.
Cheers!

Similar Messages

  • Exchange 2010 SP1 and SP2 are no longer supported.

    Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
    Support for 2010 SP1 and SP2 has ended.
    Before posting a question, please ensure you are running at least 2010 SP3.
    For more details:
    http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

    Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
    Support for 2010 SP1 and SP2 has ended.
    Before posting a question, please ensure you are running at least 2010 SP3.
    For more details:
    http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Patch Plumtree Foundation 6.0 SP1 to SP2

    Hi,
    we would at like to patch our installation of 6.0 SP1 to SP2 which is available since April 2008 (we cannot upgrade to 6.5 or even 10gR3 yet).
    I think I have downloaded everything related to Foundation 6.0 and searched all possible plumtree, bea and oracle sites now but I didn't find any instructions how to apply the service pack.
    The only document which was updated in 2008 are the Release Notes (http://one.bea.com/portal/server.pt?open=18&objID=2795854&mode=2&in_hi_userid=2&cached=true). The installation plan which was part of the 460MB download has a section for SP1 installation only and that's it.
    So are we supposed to install the whole thing AGAIN to get SP2? Did anybody ever patch 6.0 SP1 to SP2?

    Hi guys,
    AFAIK, BEA doesn't release standalone maintenance pack for 6.x basically. In other words, the only way to upgrade is to use the 6.0 SP2 or 6.1 MP2 installer on top of previous version.
    The only patch I know is for 6.1 MP1, there is a patch. So after applying, it should be 6.1.1.1.
    I've done a the following upgrade so far, using the new installer and they work:
    6.1 -> 6.1 MP1 -> 6.1.1.1 -> 6.1 MP2
    6.5 -> 6.5 MP1
    I haven't done the 6.0sp1 to 6.0sp2 but I guess it is the same thing. Do remember to run the installer on to upgrade all related components, check your deployment architecture.
    Hope this helps.
    Terry

  • Upgrading from sp1 to sp2

    Team Portal -
    I just upgraded my application from Sp1 to Sp2 (basically right click on application
    and select Install -> Update Portal Libraries).
    Do I need to do anything to the domain, or just rebuild and redeploy the ear file?
    Thanks
    Regards,
    Neeraj

    I didn't do anything to the domain, but I did "install portal" and "install
    weblibs" too.
    I first did only the update too I think, work perfectly till I made a simple
    jsr-168 portlet with the wlw wizard that didn't work.
    Thank you for any and all help,
    Geoffrey
    "Neeraj Harlalka" <[email protected]> schreef in bericht
    news:3fe72282$[email protected]..
    >
    Team Portal -
    I just upgraded my application from Sp1 to Sp2 (basically right click onapplication
    and select Install -> Update Portal Libraries).
    Do I need to do anything to the domain, or just rebuild and redeploy theear file?
    >
    Thanks
    Regards,
    Neeraj

  • [Help] Can someone with weblogic 8.1 SP1 or SP2  tell me what the VERSION is being reported as?

    you know run,
    java weblogic.Admin -url t3://your_host_name:port -username YOUR_ADMIN_UID
    -password YOUR_PWD VERSION
    reports, I just need to know if it reports something like, does it include an
    identifier for SP1 or SP2 ?
    WebLogic Server 8.1 Thu Mar 20 23:06:05 PST 2003 246620
    WebLogic XMLX Module 8.1 Thu Mar 20 23:06:05 PST 2003 246620

    you know run,
    java weblogic.Admin -url t3://your_host_name:port -username YOUR_ADMIN_UID
    -password YOUR_PWD VERSION
    reports, I just need to know if it reports something like, does it include an
    identifier for SP1 or SP2 ?
    WebLogic Server 8.1 Thu Mar 20 23:06:05 PST 2003 246620
    WebLogic XMLX Module 8.1 Thu Mar 20 23:06:05 PST 2003 246620

  • IWS 6.0 SP1 and SP2 throwing startup messages on to console

    iWS 6.0 SP1 and SP2 on HP-UX 11.0 are throwing the following messages on to the console constantly
    iPlanet-WebServer-Enterprise/6.0SP1 B08/20/2001 01:46
    [LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
    startup: server started successfully
    # [LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
    startup: server started successfully[LS ls1] http://cdbmsw2.cdbms_rbi.com, port
    80 ready to accept requests
    startup: server started successfully
    [LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
    [LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
    startup: server started successfully
    can anybody tell the reasons
    thanks in advance
    regards
    Ananda Rao

    Ananda,
    If you're starting the server from the command line, this is normal behavior. All these messages will output to the console and logs. If you start this from the GUI interface, the output will go to the logs.

  • Exchange Server 2007 sp1 to sp2 upgrade error

    Hello,
    I am trying to upgrade exchange server 2007 to exchange server 2010 but my exchange server 2007 is running sp1 which cannot be directly upgraded to exchange 2010. To do this I need to first upgrade my exchange server 2007 sp1 to sp2, i am stuck because I
    keep getting the error below:
    Error:
    The well-known object entry with GUID 6c01d2a7-f083-4503-8132-789eeb127b84 on the otherWellKnownObjects attribute on the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=mw refers to a non-USG CN=Exchange Servers,OU=Microsoft
    Exchange Security Groups,DC=domain,DC=mw.  Please either delete the well-known object entry or promote the target object to a universal security group.
    Does anyone know how to resolve this error?? please assist

    My recommendation to you is to upgrade it to Exchange 2007 SP3 with latest Rollup Updates.
    Note: Before you start installing the SP3 make sure you upgrade the AD Schema for Exchange 2007 SP3.
    For the error you are getting
    https://social.technet.microsoft.com/Forums/exchange/en-US/a9d56cc7-dbf8-401c-b4ea-1bfd3c1f13fa/problems-installing-exchange-2007-sp1-ghost-guid?forum=exchangesvradminlegacy
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • XP Profession SP1 or SP2

    Does anyone know of a way to check and see if my version of XP Professional is SP1 or SP2? I've had it for a while and had it loaded on an evil Windows based machine...since then that machine has passed away. I previously had it running through parallels and ran great. Had the random shut down issue and uninstalled it to be safe. Considering boot camp. Suggestions? Help? Anti-Windows? Input would be awesome. Thanks

    It should be printed on the disk itself whether it has SP1 or SP2. If it is SP1, you can create an SP2 disk through a process called slipstreaming, but you do need a PC in order to do it.

  • MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

    I am running a 2 node DAG with separate Hub & CAS servers
    I have already upgraded the Hub CAS server and they are fine
    Exchange running on Windows 2008 R2 SP1
    All are in VM-Ware ESXi 5.0
    After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
    If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
    But again after reboot they do not start
    Also I get the below event in the app log when the IS & SA fails to start
    Log Name:      Application
    Source:        MSExchangeIS
    Date:          05/22/2012 5:15:03 AM
    Event ID:      5003
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      server.domain.com
    Description:
    Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
    configured and  is currently online.
    If I check the Registry for time resource it is taking from the DC
    I manually compared the time between DC and Exchange and it is fine
    Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
    Checked for group policy and do not find any specific to time sync.
    Confirmed that Windows Time service is running
    Suspecting a Operating system issue, tried to upgrade the other DAG
    Even that node is displaying the same symptom and Issues
    Tried to install RU1 on both nodes and that too did not fix the issue.
    Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
    Is Anyone have come across the issue before ?

    Exchange 2010: Unable to initialize the Information Store
    Problem: 
    Unable to initialize the Information Store service because  the clocks on the client and server are skewed.   This may be caused by a time change either in the client or the server,  and may require a reboot of that computer.   Verify that
    your domain is properly configured and  is currently online.
    Solution: 
    Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
    Run this command
    Net time \\ADServerName /Set
    Restart the Microsoft Exchange Active Directory Topology Service
    *Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work..  I tried just starting the Information Store service after running the command it it still failed..
    This worked for me and all is well on my exchange server.
    - See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

  • Problem with upgrading WL6.0 sp1 to sp2

    I just recently downloaded the weblogic service pack upgrade off of the bea site.Followed all the instructions and ran the install program.When done, the program, says the installation is complete.Unfortunately, when I run the server console and check on the version it still says sp1. I am wondering, did the service pack install correctly or didn't it? If it did, why does it say SP1 still and should I worry about it with later upgrades?Thanks,

    Hi,
    to be honest I'm realy not surpriced by the answer, that you got from Microsoft. 
    The part with the Symantec is something, that is realy irrelevant from my point of view in this situation. 
    However, if you can logon to the system, I can recommend to start TVSU <ThinkVantage System update> that will search for all the updates, that are relevat to your system. 
    Please install all updates, that will be listed. Basically those updates, that you will see will be all, that are needed for your system. 
     My second thought was more in the direction to make a restore to a previous state, so that it will convert back the system back to the pre installation stage. 
    If I were you, I would test this restore part before doing the TVSU part. 
    So in this case would be my suggestion following:
    - restore the system back to a pre-SP2 installation stage 
    - after reboot check ,whether the error is gone
    IF yes => do the TVSU part and if you want to , then do the update to SP2 
    IF no => anyway do the TVSU part only to verify, whether that will kind of help the situation 
    Maybe a question out of topic, but have you made some RnR backups before the SP2 installation?
    If yes, that that might be good, becasue from my past experiences with failed SP installation, I can tell, that only a OS reinstall realy fixed all the incomming issues, OR a restore to a previous date<from a backup, or using Windows own restore option>
    Please let me know, whe you have any comments to this situation.
    I fully understand, that it does not sound realy enthusiastic.
    Rgrds

  • Networked HP 2575 Photosmart not printing. Vista PC with SP1: ANS=SP2 upgrade.

    About a week ago my Vista PC could no longer send print to my networked 2575 - "error - printing", whilst another Vista PC on the network remained able to print. I am configured for auto updates from M/soft. After trying the gamut of printer problem advice (very educational),  I went back to basics, and compared the PCs - Service Pack 2 on the PC that could print, and Service Pack 1 on mine. Upgraded to SP2 and bingo! It works. I suppose that M/s will soon have another update for SP1 users that will allow printing again, as I used to get an average of 1 a day.

    Hi:
    I am having the same problem with mom's new HP p6267c computer w Win7 and a relatively new HP Photosmart C5550 printer.  All other printing sources seem OK.   Excel fails.  Same message as reported here.   Any responses/ideas?  Worked fine on her old XP machine.

  • CR runtime SP1 and SP2 on WS 2003 and IIS 6 report is blank in reportviewer

    Hi All,
    Could you please help me, No image problem in following scenarios,
    Using asp.net 3.5
    WS 2003, IIS6,  CR runtime 2008 with SP1 = > No images
    WS 2003, IIS6, CRruntime 2008 with SP2 => No images
    WS 2003, IIS6,  CRruntime 2008(No SP) => Works allright.
    Of-course I can downgrade but is there any workaround, to combination with SP2 or SP1.
    Thank you.
    Regards,
    Sandeep Sharma
    EDIT: Its not like no image but first page is empty, only toolbar is shown. when I export all data is shown in PDF.
    Edited by: SSharma on Nov 2, 2009 3:30 PM
    Edited by: SSharma on Nov 2, 2009 3:31 PM

    Well, I'll go along with something wrong. If you can give me precise steps in how to duplicate the issue. I would like you to also try  one of our web samples from here;
    https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
    I recommend vbnet_web_simplepreview and see if you can duplicate the issue with the sample app.
    Remember that more than likely, you are not the only one running SP 1 and / or SP 2 and I do not see other reports of the issue you describe in these forums...
    Ludek

  • Upgrade App-V 5.0 sp1 to SP2 Hotfix4

    long time reader first time poster
    we currently have a App-V 5.0 SP1 native environment, we deploy the App-V client via SCCM and use the MSI in the command line ( msiexec
    /i "appv_client_MSI_x86.msi" /q /norestart ACCEPTEULA=1  /l "C:\<log directory>" )
    I would like to upgrade our environment to SP2 HF4 ( in a test lab first and then schedule to live ) 
    Now is it better to create 2 new SCCM packages one for SP2 and one for the HF4? or is there a way to combine them?
    also would you put the ClientUI install in the same package?
    any advice or web URL either way would be very much appreciated

    just to add, I am unable to get Hotfix 4 installed successfully either via a command line ( Msiexec /p mspfile ) or right clicking the MSP and selecting Apply
    The HF installs and once you reboot you are no longer able to use App-V 5.0 Client UI or any of the App-V delivered apps.
    The client has SP1 and was then upgraded to SP2 using the command line in my top post without the hotfix installed works as expected.
    Does anyone have a guide to how to use the MSP file?
    Update - it appears that the Hotfix removes the SP2 client

  • Error when i moved from sp1 to sp2

    i got following following error when i used sp2. But application was working fine
    in sp1.
    error stack
    <Mar 26, 2004 5:24:34 PM GMT+08:00> <Error> <HTTP> <BEA-101017> <[ServletContext
    (id=22050116,name=e2ePortalProject,context-path=/e2ePortalProject)] Root cause
    o
    f ServletException.
    java.lang.NoClassDefFoundError: weblogic/netuix/util/JspcExtensions
    at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.j
    ava:563)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:402)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
    va:27)
    at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilte
    r.java:313)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
    va:27)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6356)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    >
    Any help
    Thanks in advance
    Mark

    Hi Mark,
    I had this same problem. You need to update your portal libraries. This is a
    bit misleading because when you open files in the web app for the first time it
    says it needs to update some files - even though you do that you still must upgrade
    the portal libraries. To do this right click on your application Install->Update
    Portal Libraries.
    John
    "Mark" <[email protected]> wrote:
    >
    i got following following error when i used sp2. But application was
    working fine
    in sp1.
    error stack
    <Mar 26, 2004 5:24:34 PM GMT+08:00> <Error> <HTTP> <BEA-101017> <[ServletContext
    (id=22050116,name=e2ePortalProject,context-path=/e2ePortalProject)] Root
    cause
    o
    f ServletException.
    java.lang.NoClassDefFoundError: weblogic/netuix/util/JspcExtensions
    at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.j
    ava:563)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:402)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
    va:27)
    at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilte
    r.java:313)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
    va:27)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6356)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    >
    Any help
    Thanks in advance
    Mark

  • Is Zen7 SP1 Agent Backwards compatible with Zen6.5 SP1 and SP2?

    Looking at deploying the Zen7 SP1 agent, but I'm not certain of any
    caveats involved in doing so.
    Netware 6.5 SP5 CPR, Zen6.5 SP2 on one server, SP1 on the other.
    Thank you for your time,
    Troy

    I think you need Zen7 on the servers if you're gonna use the Zen7 agent,
    there is a compability matrix in the Zen7 docs on the Novell website. You
    can use the Zen65 agent with Zen7 on the server.
    "Troy H" <[email protected]> wrote in message
    news:m9WPg.92$[email protected]..
    > Looking at deploying the Zen7 SP1 agent, but I'm not certain of any
    > caveats involved in doing so.
    >
    > Netware 6.5 SP5 CPR, Zen6.5 SP2 on one server, SP1 on the other.
    >
    > Thank you for your time,
    > Troy

Maybe you are looking for