Primavera P6 Web access

I have installed primavera P6 web access, so the question is what is:
1- what is the next steps to connect to the database.
Note: the weblogic has been installed, and only run weblogic admin console whenever I run WEBLOGIC SERVER from ORACLE WEBELOGIC
Please help
Edited by: 787159 on Aug 8, 2010 5:11 PM

Hi Laszlo,
the admin users has the right license attached and the other users haven't a license. Just go into the PM-Client under Administration/Users and then the license tab.
Just give the the users who should access the primaveraweb the appropiate license like Project Management, Resource Management, Portfolio Management and they will be able to access the primaveraweb.
Regards
Daniel

Similar Messages

Primavera P6 Web Access: You do not have a license ...

Hi,
I've just installed Primavera P6 Project Portfolio Management primaveraweb and progress reporter on an EL5U5 Linux machine.
When I try to add some users who are not Administrators and try to log in to primaveraweb on the http://hostname:7001/primaveraweb page, the answer is:
"You do not have a license to run Primavera P6. Please contact your System Administrator."
I wonder what is missing here and why it works for Admin type users and why for non-admin ones.
Any help or pointer to a doc. page would be greatly appreciated,
Laszlo

Hi Laszlo,
the admin users has the right license attached and the other users haven't a license. Just go into the PM-Client under Administration/Users and then the license tab.
Just give the the users who should access the primaveraweb the appropiate license like Project Management, Resource Management, Portfolio Management and they will be able to access the primaveraweb.
Regards
Daniel

Decimals in P6 web access

In Primavera P6 web access, the columns schedule % complete and performance % complete just display one decimal place, and I need 2 decimals places displayed, how can I change this?

It is not available in the Web version, you can contact Oracle to put in an enhancement request.

Send to ERP option in Primavera Web Access

Dear All,
Even the user is authorized to send data to ERP, Send to ERP option is disabled in primavera web access. Any suggestion please share with me.
Barathidasan

A couple of things to note:
1.) The web install is separate from the client.
2.) An application server (WebSphere or Weblogic) must be setup and configured for the web to be deployed.
If you simply ran a stand-alone P6v7 install this will not install the web portion.
While I would not necessarily advise running P6v7-Web against a stand-alone database for production use, it is certainly possible (I have done this myself for testing). First thing you'll want to look at it is "Installing P6 Web Access" page 139 / 452 in the admin guide.

Primavera p6- timesheet & web access

hi
i want to ask question about primavera professional project management
can i access timesheet and p6 web module
if yes - How
if No- what i need to use timesheet and p6 web access
regards
Alaa

Hi Alaa,
Sounds like you need to be in the 'Primavera P6 Enterprise Project Portfolio Management' forum... this is for the old Product name Prosight not P6.
From my understanding, Oracle Primavera PPM provides and 'Enterprise' version (which includes the Web services and Timesheets) and a 'Professional' version that provides upto 100,000 activites in each project, with not web services or timesheet tools, this may have been what you have purchased/recieved/installed.
Best you check with your sales contact and confirm with them that you need the Enterprise version.
Or if you have the enterprise version, you can download the required tools from the Orcle website.
Regards,
James

Oracle Primavera Cost manager v 6.2 web access issue

Hi,
We are trying to integrate the cost manager for web access. However, after setting up the IIS for the latest version, an error message is generated saying the web access installation was interrupted abruptly.
Assistance is highly appreciated.
thank you,

One other thing to check is that iptables on your Oracle VM Manager box/vm is not blocking the Oracle VM Manager UI, to test type /sbin/iptables status, if iptables running turn it off by typing /sbin/iptables stop.

Open project Activities tab by direct URL in P6 8.1 Web Access

Hello!
I'm trying to access project workspace in P6 Web Access v 8.1 by direct URL from another HTTP resource.
But P6 redirects me to another dialog (for choosing project from the list) if project is not opened before by clicking command Open from menu.
Does anyone know how to prevent the opening of a project selection dialog and go directly to the page of the project activities?
Now im using this format of URL:
http://primavera:7777/p6/action/pm/activities?projectId=1000&wbsId=20000&ProjectName=null&checkTabs=true

I face similar issue and as work around i copied the user profile and created new user.
It works fine with new user profile.
I think it happens sometimes we check new tab before loading previous one and because of that user profile get corrupt.

Need Help in the installation of p6 v7 web access on weblogic

Hello all
i have a problem and i need help .. when i installed the Web Access on web-logic the state of the deployed application is failed i've installed it several times and the state is still failed
i checked the configuration on page 160 on the admin guide and i did everything as stated in the guide
i don't know what is the problem can any body help me
thanks alot
Edited by: 796239 on Oct 13, 2010 1:25 AM

Hello Lin,
I am not able to understand anything from the error message which you have pasted. But I have successfully deployed the primavera web access for company.
I have written down the steps properly using some images also for my future reference in a M.S. Word document.
If you want I can send the document to you which I am sure will help you. You let me know your mail id.
Regards
Hawker

P6 Web Access connection to MS SQL Server database using TCP Dynamic Ports

Hi,
I am attempting to install P6 Web Access. When I run the installation and do the database configuration I am required to input a port number into the Database Host Port field. I do this and no error is displayed graphically, but I get a connection refused error when I look in the web access log.
"com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect "
The dba is running the database on an sql server farm and does not want to apply a static tcp port to the Primavera database as this will interfere with his other databases.
The fact that it appears to be mandatory to input a host database port during database configuration, has me thinking that P6 Web Access requires that the database be set up with a static TCP port? Is this correct?
I searched the documentation about this but came away with nothing...
any help would be truly appreciated.
Andy

At my previous company we experienced a similar issue with P6 Web. Our P6 database was hosted on an Oracle RAC and when configuring the Web connection I was forced to point it to a single RAC server rather then allow it to utilize the cluster. If you have found a resolution to this I would be interested in hearing about it.

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Can no longer connect to a Microsoft Outlook Web Access site

Hi,
I hope you can help.
I used to be able to access a Microsoft Outlook Web Access site. However recently I am unable to do so. It has a self signed certificate, which I used to choose to accept, and then the browser waits and waits and waits.
I have tried Safari, Firefox, Camino, Flock, Opera, even Internet Explorer. They all behave the same way.
I am not sure when it stopped working. I only log on infrequently. So I do not know if it stopped working after a security update or an OS upgrade.
My Mac is up to date with software updates. I have performed the usual things, repaired permissions etc.
The funny thing is I can connect using Netscape Comunicator under Classic. I have also borrowed a friend's MacBook running leopard, and that works too.
I am wondering if a setting somewhere has become corrputed or inadvertently set incorrectly.
Thank you in anticipation.
Ted

Hi Bryan,
Thanks for your input.
Unfortunately I cannot get any of the OS X browsers I have tried to get beyond the accepting the site's certificate. All just stall waiting on the Outlook Web Access site. Safari 3.1, Camino, Flock, Firefox (2.0.0.12 and 3 beta 4), Netscape (7.1 and 9), Microsoft's Internet Explorer (thinking that might be more integrated with its Outlook Web Access package).
I have even deleted the certificates from my Keychain (for Safari) or within the other browsers' preferences.
Last night I even re-applied the 10.4.11 combo updater and then checked for software updates to confirm my system was up to date, but again without success when attempting to reach the Outlook Web Access site.
Thanks anyway.
Ted

External Data Refresh failed - Unable to refresh list data in Excel Web Access WebPart

Hi,
I have created a PivotChart in Excel workbook that fetches data from a SharePoint list using "OData Data Feed". When refreshing the connection in Excel 2013, the updated data is displayed in PivotChart. But when i upload the same to a SharePoint
Library and refresh it through Excel Web Access WebPart, it throws an error.
After configuring PowerPivot for SharePoint, i am getting a "We cannot locate a server to load the Data Model" error.
Note -
SQL Analysis Service(PowerPivot) is in running state.
PowerPivot Server has been under Data Model in Excel Service setting.
The library location is added in trusted zone.
Using secure store didn't fix the issue.
Stack Exception
SSPM: Initialization failed on server : Microsoft.AnalysisServices.ConnectionException: A connection cannot be made. Ensure that the server is running. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively
refused it 127.0.0.1:2383
at System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) --- End of inner exception stack trace ---
at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Connect(Nullable`1 ctx, Boolean schedulePingTaskOnFailure)
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx)
at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken ctx)
Check Server Version (ServerName\POWERPIVOT): Fail (Expected:
=11.0.2800.0, Actual: 11.0.2100.60).
--> Check Deployment Mode (ServerName\POWERPIVOT): Pass.
Monitorable Check Server Configuration (ServerName\POWERPIVOT): Fail (Uninitialized, ConfigurationError, WrongVersion).
SSPM: Initialization failed on server ServerName\POWERPIVOT: Microsoft.AnalysisServices.Streaming.ServerConfigurationException: Server ServerName\POWERPIVOT failed configuration checks (Status = Uninitialized, ConfigurationError, WrongVersion).
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.AssertServerConfiguration(Server amoServer, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken
ctx)
Thanks,
Thomas Mathew

Hi,
For your issue, the possible reason is that the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis Services (PowerPivot) service is stopped.
Install PowerPivot for SharePoint or move the PowerPivot workbook to a SharePoint environment that has PowerPivot for SharePoint installed.
If the software is installed, verify that the SQL Server Analysis Services (PowerPivot) instance is running. Check Manage services on server in Central Administration. Also check the Services console application in Administrative Tools.
Refer to the following link:
http://msdn.microsoft.com/en-us/library/ff487858.aspx
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/2e728b3e-6d3d-497b-b0ce-57f2699710e5/access-was-denied-by-the-external-data-source-the-following-connections-failed-to?forum=sharepointadminprevious
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

How do I add Outlook Web Access to mail accounts on my iPod?

I have Outlook Web Access on my laptop to access my work email. I am trying to set up a mail account on my iPod Touch thru Microsoft Exchange unsuccessully. If I should be choosing "Other" instead of Microsoft Exchange, where do I find the incoming and outgoing mail server Host name and User name? And am I using my password in both spots?
Any help is appreciated...thanks!

- Google for:
setup XX email on iphone
to get the settings.
- Ask your IT department for the settings.

Excel web access web part Refresh

Dear All,
Please let me adress my SharePoint issues to you.
Current situation:
I currently have an excel file stored in one of my sharepoint libraries.
The excel file has two tabs.
The first tab contains data exported from a sharepoint list (with data connection)
The second tab has a customized table based on the first tab.
I created a page and added a Excel Web Access web part. The above mentioned excel file (tab2) is viewed in this web part.
Problem:
Everytime I change something in my sharepoint list, the changes will not be viewed in the web part. The changes will only view when I open the excel file in the library first, and then save it.
Question:
Is there a way I can refresh the data automatically, or manually without having to leave the page of the web part?
If anyone has a solution please let me know, thank you for your help!
Bob

you can configure automatic data refresh. fairly simple. this article is for SQL data source, but the same process applies across the board.
http://technet.microsoft.com/en-us/library/hh525341(v=office.15).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Error installing RD Web Access role service on Windows 2012 R2 server

I'm attempting to install the RD Web Access role service to test a VDI deployment but the installation keeps failing. I get the following error:
Exception of type 'Microsoft.RemoteDesktopService.Common.RDManagementException'
was thrown.
As anyone else come across this error? Any help would be appreciated.
Thank you.
Martin.

This is a Service Manager forum and it looks like you wanted to post in a general Windows Server forum. Try posting this here: http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?forum=winservergen
You should also post more details on the services that you are installing.
- Get on the floor, do that dinosaur

Primavera P6 Web access

Similar Messages

Maybe you are looking for