Primavera Progress Reporter (Timesheets)

I would like to ask. if the person who is assign on the activity and he start the acitivity and puts the hours he accumulated on the Timesheet table and finish it. Does it reflect on the server Primavera the actual hours he enter in Primavera Timesheet.
Because in my Timesheet i cant see my input for actuals that i put in the timesheet!
Thanks!!

Did you find a solution?
I am seeing the same problem.  PR was configured using the wizard, it is running in Weblogic, and we are following the post install guide for PR post installation tasks.
http://test101:8204/pr/admin/login brings up a request for the privileged username and password but nothing works.  This is not unexpected since per the guide, the "Configuration tab" is supposed to appear but does not.  That means that it thinks it is configured when it is not.  I have tried interrogating the files under;  D:\P6EPPM_1\pr.
I can click on "Click here to administer timesheet application settings" and login as an Admin Superuser.  Trying to log into PR directly (not through administrator) fails, not authorized user.
Time for a service request unless there is a quick answer.
Thanks!!!!!

Similar Messages

  • Primavera Progress Reporter Login Failed:

    Hello All,
    i have successfully installed primavera progress reporter on weblogic,
    when i launched progress reporter page http://ipaddress::8204/pr/ then run jave file timesheet.jnlp for login prompt.
    loging to primavera p6 progress reporter:
    Login Name:
    Password:
    Language:
    so i have tried all my DB user also primavera admin user
    DB User:
    pubuser
    privuser
    admuser
    bgjobuser
    pxrptuser
    P6 user:
    admin.
    i cant login any above user account over the launch p6 progress reporter page.
    please suggest .
    Important:
    http://192.168.3.24:8204/pr/admin/configuration
    this above is working fine when open and login with pubuser account and when i login here i see,
    Configuration Home: C:/P6EPPM_1/p6/../newpr
    Database URL: jdbc:oracle:thin:@192.168.3.20:1521:XE
    Public Group ID: 1
    Username: pubuser
    Password: no password
    when i change password i get the the following error,
    Error writing configuration settings file, please choose another location.
    please update ASAP.
    Thanks in Advance.

    Did you find a solution?
    I am seeing the same problem.  PR was configured using the wizard, it is running in Weblogic, and we are following the post install guide for PR post installation tasks.
    http://test101:8204/pr/admin/login brings up a request for the privileged username and password but nothing works.  This is not unexpected since per the guide, the "Configuration tab" is supposed to appear but does not.  That means that it thinks it is configured when it is not.  I have tried interrogating the files under;  D:\P6EPPM_1\pr.
    I can click on "Click here to administer timesheet application settings" and login as an Admin Superuser.  Trying to log into PR directly (not through administrator) fails, not authorized user.
    Time for a service request unless there is a quick answer.
    Thanks!!!!!

  • Timesheet (Progress Reporter) Best Practices

    For the consultants out there - what do you recomment as best practise for Timesheet (progress reporter) approval settings? Do you recommend Auto approval, or 1-level approval. I understand there are pro's / con's of each but what is your recommendation.
    Thanks!

    It depends only on your organization's needs.
    If time-sheets needs to be approved or not.
    And if yes, by who...
    If you don't know... use autoapproval.
    PR works of course fine without this function enabled.

  • Not able to view activities in Progress Reporter

    Hi,
    Iam not able to see one activity (Status of act - In Progress) in Progress Reporter on which iam assigned as a resource in Project Management.
    Moreover, please suggest what all projects we can see in Progress Reporter?
    Is it dependent on Project status?
    Thanks.

    Hi,
    I am using P6.7 sp2 Progress Reporter. When we have a number of users trying to submit timesheets, we receive the following error in the group server and then activities are no longer displayed on timesheets.
    Exception [EclipseLink-4002] (Eclipse Persistence Services - 1.1.0.r3639-SNAPSHOT): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (PRIMA_PM.PK_USESSION) violated
    The only way around this is to restart the group server.
    Has anyone experienced this?
    Thanks,
    Stephanie

  • Progress Reporter - Failed to connect to data source

    Installed Progress Reporter and successfully call up the configuration page (http://WLS_server_name:7001/pr/admin/configuration) fill out the Database URL with the URL I use in SQL Developer (jdbc:oracle:thin:@db_Server_Name:1521:primavera) Public Group ID: 1 username: pubuser and password: pubuser. I put nothing in the Application Server section. When I click on save I get the message "Failed to connect to data source, please verify your settings and try again." I know the URL is correct as it connects using SLQ Developer. I have also created a datasource and pool using the same parameters just to validate the connection URL in different products.
    Now I do get errors when starting up WebLogic
    1) java.io.FileNotFoundException: C:\prhome\primavera-configuration.properties ...
    2) Local Exception Stack: Exception [EclipseLink-7042] (Eclipse Persistence Services - 1.1.0.r3639-SNAPSHOT): org.eclipse.persistence.exceptions.ValidationException Exception Description: Database platform class [${databasePlatform}] not found...
    3) Exception in thread "timerFactory" org.springframework.transaction.CannotCreateTransactionException: Could not open JPA EntityManager for transaction; ...
    4) A number of these: Exception Description: Database platform class [${databasePlatform}] not found....
    I am running on Windows 2008-r2 using WebLogic (64bit) and Java 1.6.0_27 (64bit); Progress Reporter installed in its own domain on a standalone (not managed) weblogic server
    I've checked the configuration steps in the documentation (especially for the setDomainEnv.cmd and the PRE_CLASSPATH settings)
    Any suggestions appreciated.
    Are any of the errors (1 through 4) causing the issue of being unable to connect to the data source?

    I have tried both privuser and pubuser. Both username/password combinations work when using sql-developer but not through the database section on the P6 Progress Reporter configuration web page.
    I don't login as admin. When I enter the URL http://WLS_server_name:7001/pr/admin it comes up with the configuration screen that has the database and application server configuration sections.
    The file primavera-configuration.properties is not created. If I create a blank file that removes the "java.io.FileNotFoundException: C:\prhome\primavera-configuration.properties ..." message but it doesn't get any content.
    Thanks,
    Greg

  • Need help on P6 v8.1 Progress Reporter installation / configuration issue

    Successfully installed P6 EPPM v8.1 on Win 2k8 ent. for evaluation. However, upon completion of the progress reporter configuration an internal server is encountered.
    I can successfully navigate to https://<ip>/pr page. However, when you click on the "Launch P6 Progress Reporter" link, the error 500 is presented
    Error 500--Internal Server Error
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.1 500 Internal Server Error
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    The setDomainEnv changes outlined in the administrators manual have been completed.
    The database configuration has been completed and the server was restarted. (https://<ip>/pr/admin/configuration) however a couple of observations:
    If I change the configuration home location the configuration does NOT stick, that is when I log back in to the pr admin configuration page I would expect to be able navigate to other tabs (i.e. connection pool, authentication, logging) but I cannot. ONLY upon accepting the default configuration home, does this take and the other tabs are presented after the restart.
    Additionally, if I select to increase the logging through the admin configuration screen, and click save, then the same error 500 page is presented (see above).
    Have also tried to use the http://<ip>/pr/applet?lang=en no success.

    here is the log file null pointer exception.
    Aug 25, 2011 1:44:51 PM org.eclipse.persistence.session.file:/C:/Oracle/Middleware/user_projects/domains/p6/servers/Server-0/tmp/_WL_user/pr/xl82q5/war/WEB-INF/lib/pr-model-8.1.0.0.jar_Model
    WARNING:
    java.lang.NullPointerException
    at org.eclipse.persistence.internal.security.PrivilegedAccessHelper.getMethodParameterTypes(PrivilegedAccessHelper.java:318)
    at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.getSetMethodParameterType(MethodAttributeAccessor.java:143)
    at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.getSetMethodParameterType(MethodAttributeAccessor.java:131)
    at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.setAttributeValueInObject(MethodAttributeAccessor.java:257)
    at org.eclipse.persistence.internal.descriptors.MethodAttributeAccessor.setAttributeValueInObject(MethodAttributeAccessor.java:201)
    at org.eclipse.persistence.mappings.DatabaseMapping.setAttributeValueInObject(DatabaseMapping.java:1393)
    at org.eclipse.persistence.mappings.ForeignReferenceMapping.buildCloneFromRow(ForeignReferenceMapping.java:207)
    at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildAttributesIntoWorkingCopyClone(ObjectBuilder.java:1344)
    at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildWorkingCopyCloneFromRow(ObjectBuilder.java:1472)
    at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildObjectInUnitOfWork(ObjectBuilder.java:565)
    at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:502)
    at org.eclipse.persistence.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:454)
    at org.eclipse.persistence.queries.ObjectLevelReadQuery.buildObject(ObjectLevelReadQuery.java:723)
    at org.eclipse.persistence.queries.ReadAllQuery.registerResultInUnitOfWork(ReadAllQuery.java:738)
    at org.eclipse.persistence.queries.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:420)
    at org.eclipse.persistence.queries.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:1076)
    at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:740)
    at org.eclipse.persistence.queries.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:1036)
    at org.eclipse.persistence.queries.ReadAllQuery.execute(ReadAllQuery.java:380)
    at org.eclipse.persistence.queries.ObjectLevelReadQuery.executeInUnitOfWork(ObjectLevelReadQuery.java:1122)
    at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2910)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1291)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1273)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1247)
    at org.eclipse.persistence.internal.jpa.EJBQueryImpl.executeReadQuery(EJBQueryImpl.java:479)
    at org.eclipse.persistence.internal.jpa.EJBQueryImpl.getResultList(EJBQueryImpl.java:714)
    at com.primavera.pr.dao.impl.UserDaoImpl.findByName(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.primavera.pr.jamon.JamonIndivQueriesMonitor.invoke(JamonIndivQueriesMonitor.java:33)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.primavera.pr.jamon.JamonQueryMonit

  • CWB Run Progress Report - Not working

    Hello Gurus,
    In CWB, I am unable to run Progress Report of the Plan.
    System hangs upon hitting "Run Report" after selecting the Plan for which the Progress Report is to be generated. (Eventually I need to close the browser)
    "BEN:CWB Plan context for reporting" is selected.
    I am running this report after running Participation Process.
    Can anyone help me find, where is the catch and how to solve it.
    Regards,
    Jeeva

    In BI Publisher Admin, check security configuration - open Roles and Permissions and check the report folder has necessary permissions to other user group.

  • Making Primavera P6 reports and dashboards available to a portal

    Has anybody any experience with making Primavera P6 reports and dashboards available through a portal?

    The My Reports portlet enables you to add an unlimited number of reports created in the Project Management module to the portlet. Once added, you can schedule reports to run at specific time intervals, and then view reports in HTML format or in Excel.
    Tip: The "No data available" message is displayed when you have not added any reports to the portlet.
    You can schedule recurring reports that run periodically at a certain date, or you can schedule a report to run once. When you schedule a report, the portlet submits the job request to the Primavera Job Service. The Job Service processes the request at the scheduled time and runs the report. Keep in mind that the Job Service runs the reports by logging in as the user who schedules the report. Thus, user security and access settings always apply, and the same report might not return the same data for users with different privileges.
    Tip: To schedule reports, you must have the required security privilege and you must also have the Primavera Job Service installed and configured for the database you are using
    If you have any further questions please contact support at http://primavera.com/customer/support.asp.
    Sincerely,
    Saryn Perrone

  • Reporting (Timesheet Project Aggregation) tasks "waiting to be processed" forever...

    Project Server 2010 /SP2/SEM
    A few days ago, a job of the type Reporting (Timesheet Project Aggregation) in the queue got "stuck" (by which I mean it shows  processing but at 0%) and some, but not all,
    subsequent Reporting (Timesheet Project Aggregation) jobs now automatically go to "waiting to be processed" and nothing happens.  I tried canceling the original job (shows up as number one if you
    select "show related jobs") and it cancels all the "waiting to be processed" jobs, but that number 1 job doesn't change.
    The timesheet line information that we use for reporting does seem to be hitting the database,  and the users aren't seeing any errors in their timesheets, but the queue is becoming more and more junked up with these things every day.
    Also, there are jobs of this type that are completing without a problem.  It doesn't seem to be tied to a specific project they are putting hours against or any other type of pattern that I can detect.
    This screenshot only shows some of the jobs, there are a whole lot more in there.
    Has anyone seen anything like this before?  There is woefully little information out there about particular queue job types and what they mean, and google has not been forthcoming.  I'd appreciate any ideas!
    Elli J Project Solutions Specialist Blog: http://projectserverpants.wordpress.com/

    Hi Elli
    Are you performing Reporting database refresh? I see the jobs are in "Timesheet' Queue, are you able to process other timesheet jobs?
    Did you check restarting SharePoint Timer Service and Project Server Queue service?
    ==Anil==

  • Test Plan Progress report parameter

    I'm trying to use the Test Plan Progress report but the Test Plan field is always empty therefore I cannot render the report.
    The TFS is 2013 update 4 and I tried also with the report downloaded from MSF for Agile Software Development 2013.4 template. The cube is processed with no errors.
    Any ideas?

    Looking further I noticed that the MDX query that is populating the report parameter is not returning any data.
    Could this be a breaking change for the report from the last TFS update?
    Below is the query generated by the report:
    WITH
    MEMBER [Measures].[ParameterCaption] AS
    IIF([Test Plan].[Test Plan Name].CURRENTMEMBER IS [Test Plan].[Test Plan Name].[All],
    "All (No Filter)",
    [Test Plan].[Test Plan Name].CurrentMember.Member_Caption
    MEMBER [Measures].[ParameterValue] AS
    [Test Plan].[Test Plan ID].CurrentMember.UniqueName
    SELECT
    [Measures].[Point Count Trend],
    [Measures].[ParameterValue],
    [Measures].[ParameterCaption]
    } ON COLUMNS,
    ([Test Plan].[Test Plan ID].[All], [Test Plan].[Test Plan Name].[All]) +
    Extract(
    [Test Plan].[Test Plan ID].[All],
    [Test Plan].[Test Plan Name].[All],
    [Team Project].[Project Node GUID].[All],
    [Test Case].[Area Hierarchy].[All],
    [Test Plan].[Iteration Hierarchy].[All]
    ) +
    Filter(
    CrossJoin(
    [Test Plan].[Test Plan ID].[Test Plan ID],
    [Test Plan].[Test Plan Name].[Test Plan Name],
    StrToMember("[Team Project].[Project Node GUID].&[{4dad3f77-6199-41eb-af5a-a95f93b6af18}]"),
    StrToSet("[Test Case].[Area Hierarchy].[All]"),
    StrToSet("[Test Plan].[Iteration Hierarchy].[All]")
    [Measures].[Point Count Trend]
    [Test Plan].[Test Plan ID], [Test Plan].[Test Plan Name]
    } ON ROWS
    FROM [Team System]

  • [ Progress report ] Typo3 meets SAP

    Hello PHP Scripter’s,
    [ Progress report ] Mambo meets SAP with SAP.
    The concept is like Andi's. We authenticate against SAP SU05 Users using the Function Module BAPI_PAR_EMPLOYEE_CHECKPASSWOR. The User Information is written into the standard Typo3 Front end User database table. From a former ITS (SAP Internet Transaction Server) based application we have inherited a home grown authorization system which we use to map to Typo3 Front end User Groups. These groups are used to define what Pages are displayed for a authenticated user.
    To connect to R/3 we use Web Services because of the better Unicode support and security mechanisms which can be implemented. We wrap the standard BAPI's and RFC Functionality by our own RFC.
    We will allow Users with "Administration" rights to create new contact persons in the Company and change contact person data like first name, last name, E-Mail, Phone, Fax. The other functionalities are sales order status, price and availability check, quotations, ...
    Best regards
    Gregor

    Hello Blag,
    what's about installing the SAP NetWeaver 04s ABAP Edition avaliable at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">sap NetWeaver Sneak Preview and Trial</a>? There you have the full Web Service enviroment.
    Regards
    Gregor

  • Oracle's Primavera P6 Reporting Database

    Anybody has used Oracle's Primavera P6 Reporting Database? I would like to get some info. Oracle is so busy to answer my questions.
    Thanks,
    Fouad

    The best way is to read the manual as ERDB is very few companies using successfully and thats why Oracle do not have much to tell about expecially from troubleshooting point of view.
    Understanding Stage, ODS and Star Databases, ETL process and then using crystal reports to get the desired reports is what ERDB.
    Now we got a new Oracle P6 tool called P6 Analytical R1 that works with ERDB R2 for real time analysis and business intelligent reporting...cool stuff but really tricky...
    Cheers.
    Jawad
    Novo Rail, Sydney

  • Using Order progress report CO46

    Hello,
    Here for the top level material I am using MTO strategy 20 and for the lower levels I am using a collective indicator with which multiple sales order requirements are grouped together in the lower levels.
    I am trying to use the order progress report CO46 to find the status of a sales order at the lower multiple levels of the BOM. But when I am running the order progress report system says "No sales orders with MRP-relevant requirements were found". I am not able to figure out why. I need a report by which I can find the production status at mutiple levels against a sales order. Planning production at lower levels using MTO below(using Individual requirements)  is not an option because of the process followed here.
    Sincerely,
    Aji

    Hi,
    "No sales orders with MRP-relevant requirements were found"...you are getting this message as you have not Run the MRP against the sales order.
    Before executing CO46, ensure that you have run MRP for sales order in MD50. Once you run the MRP, all the requirements as per the exploded BOM will be generated & then you can check the order progress of sales order in CO46.
    Regards,
    Sandeep

  • Progress Reporter. I can't access,not granted access for direct login

    I am trying to Access to Progress Reporter.
    Web Access is running correctly and I got access with "admin" user. But when I am trying to use the admin user for Progress Reporter I got this message:
    Logon denied for[admin]. You are not granted access for direct login,please contact your administrator. Please choose 'OK' to make corrections or 'Cancel' to exit tha application.
    I don't know how to create user for Progress Report if that is the problem. Please help me......I will appreciate your help a lot.
    Thanks

    I have the same problem (p6v7), but the diference with the case mentioned, I have all checkbox marked correctly and all permision to users.
    When I tried to loggin appear the same error
    Have someone any tip???
    Thanks

  • Report Progress - Report Execution

    Post Author: grim_notepad
    CA Forum: .NET
    Launguage: C#Crystal Reports: 11.5-----I am running Reports in a BackgroundWorker and i want to get the status of the report being executed. Is there a report progress return value much like the one for backgroundworker. I see  in the actual Crystal Reports program there is a status of how many rows returned out of total rows.. is that information available in C#?

    Post Author: Ted Ueda
    CA Forum: .NET
    That specific functionality doesn't appear to be exposed in Crystal Reports .NET SDK.Sincerely,Ted Ueda

Maybe you are looking for