Primay file is not available in java filter of custom component

I have a java filter on checkin doc.
I can see primary file dir by calling binder.getLocal("primaryFile:path");
By when I check my disk, it is not really there. So I can not do any processing on the checked-in doc.
What caused that?

That should be right, I believe. The temporary path also looks to be a relative path. Try using a combination of:
String path = binder.getLocal("primaryFile:path")
String dir = binder.getTemporaryDirectory();
and/or iterate through:
Vector v = binder.getTempFiles();
to find the one one you need. Once you do, you should be able to use the following to create the file to validate against:
File file = new File(path);
Good luck.

Similar Messages

WebPartPagesWebService.GetWebPartProperties gives The file is not available. Either the file does not exist or it cannot be edited from its current location.

Hi,
I am trying to get all web parts from our sharepoint site by calling web service method GetWebPartProperties of WebPartsPages service. The method works fine for the root page (Home Page) but for pages in sub site i get this in the xml
node, Outer XML - <WebParts xmlns="http://microsoft.com/sharepoint/webpartpages"></WebParts>. I am struck here.
Please help me understand why i am getting this?
Regards,
Kalim

Hi,
We can do as follows:
1. Mark sure the page URL is correct.
2. Check whether current user has permission to access the page.
3. Use SPServices to get web part properties.
http://spservices.codeplex.com/wikipage?title=WebPartPages
Best Regards
Dennis Guo
TechNet Community Support

Vendor Master: File is not available

Hi All,
I am trying to create a vendor master record for a new company code / plant / purchasing org I have created. I am getting an error message: "file is not available" when trying to save it. The error does not specify the file name that is missing.
Can anyone please throw some light on this?

in general the FSE000 error is issued when a GUI-Upload failes because the function module does not find the file to upload.
I have never seen this error in transaction XK01, so I can just guess.
Maybe you are supposed to attach a document e.g. a letter from your vendor when creating a vendor master, just as a prrof for address and tax codes etc.
Maybe this is controlled thru a user exit.

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site without success.

The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load. I can load the editor from its .exe file but not the organizer.

[svn:osmf:] 17499: Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available

Revision: 17499
Revision: 17499
Author:   [email protected]
Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
Log Message:
Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-990
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

Revision: 17499
Revision: 17499
Author:   [email protected]
Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
Log Message:
Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-990
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

Folder Specified for Temporary Files is not Available

Whenever I start PS CS, I get a "The Folder Specified for Temporary Files is not Available" error message. How do I fix this?
Thanks!
JB

>F is internal.
Doesn't proof that it's working. Disable it (as a scratch disk). See what happens.
Rob

I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

Look above at my original post:
Downgrade Mavericks to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

Critical BitLocker Drive Encryption system files are not available

Hi all,
We are running into some issues when attempting to configure BitLocker Drive Encryption through the BitLocker UI on Windows Server 2008SP2.
On running the BitLocker configuration screen we are presented with a message stating that
‘Your system volume is not configured correctly to allow you to use BitLocker Drive Encryption.
Critical BitLocker Drive Encryption system files are not available’
We believe this issue may have been caused during a recent hardware migration using the DoubleTake Move software as we encountered a similar issue with the Windows Backup utility not seeing any available HDDs.
Has anyone else encountered a similar issue and aware of any potential fix?

I think it should be supported on Windows Server 2008 as it is supported on Windows Vista.
Can you check whether BdeHdCfg.exe is present in System32 folder. If not can you copy the BdeHdCfg.exe installer from higher version of OS and copy it to the system32 folder on Windows Server 2008 and then run the command with the administrative rights.
NOTE : Make sure to change the directory to %SystemDrive%\Windows\System32
Before running the command.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

Critical BitLocker Drive Encryption system files are not available- which was working earlier.

Hello All,
The E drive (external USB drive) of server which was encrypted using bitlocker. earlier it was working perfectly fine. On running the BitLocker configuration screen we are getting with a message stating that ‘Your system
volume is not configured correctly to allow you to use BitLocker Drive Encryption. Critical BitLocker Drive Encryption system files are not available’
now whenever we are clicking on E drive it is showing to format the disk.
can anyone help me to understand which are the files required or repair for bitlocker?
Thanks & Regards,
MAsud Hussain

Hi Masud,
Do you have any progress at the moment?
If there are any related error messages in Event Logs, please post them out for further analyzing.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Sharing Folio - Source .indd files are not available for this article

when sharing a folio, and opening it up in indesign 5.5 all articles say:
"Source .indd files are not available for this article"
What is the point of sharing if you can't change articles and update them?

Because you’re not sharing the InDesign files, you’re sharing the folio.
Pretty similar to sharing a PDF but not the source files.
That said, I’m working on a project with someone else and everything sits in a Dropbox folder. Only I can update the folios but my partner has access to the InDesign files.
Bob

Why my AVI file is not playing? It says a codec component is missing. How do I correct this?

Why my AVI file is not playing? It says a codec component is missing. How do I correct this?

Alternatively, you can download the free iConvert App from the App Store, it can convert into .mp4 which you could then add to your iTunes library and sync to iPhone/iPad/iPod :)
http://iconvert.en.softonic.com/mac

Photoshop won't open because scratch file is not available!

Hi, When I try to open my CS5 version of PS, it gives me this error: "Could not open a scratch file because the disk is not available" When I click OK, is gives another warning: "Could not initialize Photoshop because the disk is not available." I have tried uninstalling and reinstalling PS and I still get this problem. I can't open the program to see what is going on with the scratch file/disk! Does anyone know what I can do?
Thanks,
kt

Hi, It was Shift, Option and Command keys on a Mac. Thanks for the video link!
Thanks,
kt

Azure File Services not available in preview

I have created a high availability cloud service with 2 running instances and have encountered an issue with data that was being saved to the RoleEnvironment drive which is of course inaccessible if the user is moved to the other server by the load balancer.
I have therefore been investigating shared files between the instances where I could maintain the file structure of the uploaded zip file after unzipping it but the Azure File Service is not available in preview. Can I please request this for any of the two
subscriptions I belong to please

Hi Mohit (& Adi if this old issue never did get resolved for you),
First, Azure Files only work for new accounts created after your preview has been activated. The easiest ways to check if a new account has the file endpoint or not:
1) Current portal (manage.windowsazure.com): Click on the account, click "Dashboard", you should see Files under service with an end point (see example screenshot at end of message)
2) Alternatively, you can run from a cmd window: "nslookup <youraccountname>.file.core.windows.net". If your account has a file endpoint, the nslookup will resolve rather than saying "can't find the domain"
If you don't see the files end point on new accounts with the above method(s), please let us know and we can look further.
Thanks,

Exe file will not start using a Measurement studio 2013 component

Hello,
I use Meausrement studio 2013 with visual studio 2012 and vbnet on windows 7.
On a new project (windows form application), i use a form and a ScatterGraph component. I compile, no errors and it works fine.
Now, i try to start this application on a another Windows 7 station. (The framework 4.5 is installed on its station).
The exe file is in a directory with the natrional Instruments dll files.
The exe file will not start, no errors.
PS: Before, with Meausrement studio 2010 and visual studio 2010 all worked fine.

Hi, virgule
It sounds like you are using the "Publish" feature in Visual Studio (a.k.a., ClickOnce) for deployment, is that correct? If so, unfortunately ClickOnce is not supported by Measurement Studio components.
If you are looking for a good way to deploy Measurement Studio applications, I would highly recommend upgrading to Measurement Studio 2015, which ships with Measurement Studio Installer Builder. You can read more about this here: http://www.ni.com/white-paper/52669/en/
If you cannot update to Measurement Studio 2015 and are using Visual Studio 2013, NI recommends using WiX for creating your installer. More information on WiX deployment can be found here: http://digital.ni.com/public.nsf/allkb/764B727C9BD2C4C686257C970053D059
Thanks,

AddChild Not working in a loop with custom component

Hi,
I have a custom component 'form component'
<?xml version="1.0" encoding="utf-8"?>
<mx:Form xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%">
    <mx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import flash.net.navigateToURL;
            public var documentName:String;
            public var documentLocation:String;
            public var documentDescription:String;
            public var documentLevel:String;
            private function openLink():void
                var urlRequest:URLRequest=new URLRequest(documentLocation);
                navigateToURL(urlRequest,"_blank");
        ]]>
    </mx:Script>
    <mx:FormItem width="100%" height="100%" paddingRight="10" borderThickness="10">
        <mx:VBox width="100%" cornerRadius="10" borderThickness="2" borderStyle="solid" borderColor="#D5D2D2">
            <mx:ApplicationControlBar width="100%" fillAlphas="[1.0, 0.52]" fillColors="[#FFFFFF, #B3CDD9]">
                <mx:LinkButton id="eachDocumentName" label="Name" click="openLink()" textAlign="left" width="50%" />
                <mx:Label id="eachDocumentLevel" text="Level" textAlign="right" width="50%"/>
            </mx:ApplicationControlBar>
            <mx:Label id="eachDocumentDescription" width="100%" text="Description" paddingTop="5" paddingLeft="10"/>
            <mx:Label height="10" width="100%" />
        </mx:VBox>
    </mx:FormItem>
</mx:Form>
and I Want to add this component inside a VBox for a loop dynamically like
Script Code:
private function showDocuments(event:ResultEvent):void
                var documentList:ArrayCollection=event.result.root.documents.document;
                for(var i:int=0;i<documentList.length;i++)
                    var documentName:String=documentList[i].name.toString();
                    var documentDescription:String=documentList[i].description.toString();
                    var documentLevel:String=documentList[i].level.toString();
                    var documentLocation:String=documentList[i].location.toString();
                    createChildForFilePanel(documentName,documentLevel,documentDescription,documentLocation);
            private function createChildForFilePanel(documentName:String,documentLevel:String,documentDescription:Stri ng,documentLocation:String):void
                    Alert.show("function Called");
                    var documentListing:DocumentListing=new DocumentListing();
                    documentListing.percentWidth=100;
                    documentListing.percentHeight=100;
                    documentListing.eachDocumentName.label=documentName;
                    documentListing.eachDocumentLevel.text=documentLevel;
                    documentListing.eachDocumentDescription.text=documentDescription;
                    documentListing.documentLocation=documentLocation;
                    filePanel.addChild(documentListing);
MX: code
<mx:VBox id="filePanel" label="File Content" width="100%" height="100%" borderThickness="0" >
      </mx:VBox>
This is actually Not working.. Am I doing anything wrong. I have included the component in the namespace..
Thanks In Advance,
Piyush

Its working now. The Solution to it what I found was whatever you are Adding To the Parent Component. The Parent Component should be created in the action script.
Worked for me :-)
Thanks,
Piyush

Primay file is not available in java filter of custom component

Similar Messages

Maybe you are looking for