Prime 2.0 alarms for unmanaged interfaces
PI 2.0 is working great for me apart from 1 thing....every hour I get alarms for all the down interfaces I am not interested in?
These are from the pollen as all traps are disabled on the devices.
The monitoring templates have been un deployed then deployed to look at wan port group only. The interfaces I am being alerted to are not in this port group.
Wondering if this is a bug? I have rebooted PI.
Sent from Cisco Technical Support iPad App
If it is anything like LMS 4, it treats each context as a separate object. Configure an IP on each context and add that to Prime.
Similar Messages
-
Alarms for To Dos in Mail - appallingly bad interface
Unless I'm doing something wrong, when you create a Mail to do and enter an alarm for it, the box goes away after every character you type. For instance:
* Change the ridiculous default of "day before" to "same day." The box goes away and you have to click it again.
* Type a single number into the time field. The box goes away and you have to click it again.
* Type another number into the time field. The box goes away and you have to click it again.
* Change p.m. to a.m. The box goes away and you have to click it again.
To add other alarms you must repeat this infuriating process all over again. This is one of the worst interaction designs I can think of. Or am I totally missing something?And also, why is the Mail keyboard command for creating a to do different from the one in iCal?
iCal: command-K.
Mail: command-option-Y.
As far as I can tell command-K is not assigned to anything in Mail, nor is command-option-Y assigned to anything in iCal. Why not use the same one?
Apple is supposed to be the industry standard for interface design. Doesn't anyone think about these things? -
Cisco Prime - create a Fault Alarm for Syslog Messages
Is it possible to generate an alarm for especific Syslog Messges sent to Cisco Prime?
Admin > Network > Notification and Action Settings > Syslog Automated Actions
Here is possible to send an email. But I would like to see the alarm in the Monitoring dashboard.Hi Leonardo,
unfortunately ,Automated action that you create on syslog will not show in the Monitoring dashboard :(
Thanks-
Afroz
****Ratings Encourages Contributors **** -
LMS Prime: Disabling Alterts for BRI Interfaces
Hello,
i revceive a lot of Alerts of BRI Interfaces on a router.
EVENT ID = 000072X
TIME = Tue 08-Nov-2011 16:06:44 CET
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = 192.168.25.4
MANAGED OBJECT TYPE = Routers
EVENT DESCRIPTION = OperationallyDown::Component=IF-192.168.25.4/36 [BR0/0/0:1];ComponentClass=Interface;ComponentEventCode=1075;AdminStatus=UP;DuplexMode=FULLDUPLEX;OperStatus=DOWN;MaxSpeed=64000;Type=DS0;Mode=NORMAL;IsFlapping=false;InterfaceCode=CODEUNKNOWN;LastChang
NOTIFICATION ORIGINATOR = Fault Management Module
how can i get rid of them?
i already searched in Monitor > Fault Settings > Setup > Threshold Settings
but i didn't found where i can disable Operationally Down messages for certain interfaces.
thanks
alexHi Michel,
i tried to modify the tpmgr-param.conf file and added this entry IFDescrPattern-.1.3.6.1.4.1.9.1.1045 *~Bearer Channel*. But still I receive the messages.
#This is an example of how to restrict the creation of ports for a
#specific sysObjectId based on the ifType:
#IFTypePattern-SwitchPort.1.3.6.1.4.1.9.1.501 53
IFDescrPattern-.1.3.6.1.4.1.9.1.1045 *~Bearer Channel*
# Add Fiber Channel port (56) for MDS devices
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.380 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.376 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.375 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.414 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.411 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.442 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.612 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.719 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.1.475 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.1.407 6|26|56|62|69|117 -
Alarms for Third party devices on Cisco PI v 2.1
Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?
Hi,
AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
Third-party support
● Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
Thanks-
Afroz
****Ratings Encourages Contributors **** -
Dears,
I use to have wireless infrastructure based on autonomous APs 1142n, auth w/ 802.1x and everything was fine.
My Company decided to implement WLC 5508, and I changed only 2nd floor (2 APs) as lightweight and implement WLC over there as pilot testing...
Now All persons here (around 35 clients) are complaining about disconnections, poor signal...
Both APs are distant each other maximim of 15 meters... Our office has a medium open spaced room, with (20 X 15 meters) only 2 "Pilaster" in the middle of the room.
I am facing this message at WLC logs
Thu Nov 1 16:03:57 2012
Coverage hole pre alarm for client[1] 00:37:6d:eb:67:44 on 802.11a interface of AP 00:26:cb:4c:8e:b0 (AP01-RJOBTF). Hist: 1 0 3 4 1 1 2 7 2 9 10 13 4 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Thu Nov 1 15:55:21 2012
Rogue AP : 7c:4f:b5:ed:27:a1 detected on Base Radio MAC : 1c:aa:07:6e:93:20 Interface no:0(802.11b/g) on Channel 11 with RSSI: -92 and SNR: 1 and Classification: unclassified
Thu Nov 1 15:50:27 2012
Coverage hole pre alarm for client[1] 28:e0:2c:6d:11:58 on 802.11b/g interface of AP 00:26:cb:4c:8e:b0 (AP01-RJOBTF). Hist: 0 0 2 5 11 16 9 2 5 12 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Is there any best practices I should perform over here ?
Any specific configuration with the signal itself ? In my opinion we dont have a big room here .. 2 APs should work very well... but they are not...
I also can see many Rogue APs... I am not sure if that rogues aps have anything to do with this problem.... also I didnt change anything at 3rd floor (not sure if the
Thanks in advance!!!Actually I am using both APs as lightweight in 2nd floor.
How about this power level? where I can find those parameters ?
At 3rd floor all APs are autonomous, I accessed one of them and find this parameter
CCK Transmitter Power (dBm): Max
OFDM Transmitter Power (dBm): Max
Client Power (dBm): Max
is that the parameter you talked about ?
At WLC I found this screen
Tx Power Level Assignment Algorithm
Power Level Assignment Method
Automatic
On Demand
Fixed
1 2 3 4 5
Maximum Power Level Assignment (-10 to 30 dBm)
Minimum Power Level Assignment (-10 to 30 dBm)
Power Assignment Leader
Last Power Level Assignment
Power Threshold (-80 to -50 dBm)
Power Neighbor Count
Should I check anything else ?
Thanks in advance!!! -
Distortion in Save For Web interface
I am still having problems with my Save For Web interface. Attached is a screen where you can see that with just the Optimized view showing (in this case 72%), the picture looks as expected. But if I go to 2-up or 4-up views, the 2nd image (which was the 72% Optimized) is now all pixelated as if it were a GIF.
OMG! How many years have I been using this program and I have never noticed this until now?!?
Sorry for the brain fart and thanks for pointing that out!!!
I am really having a good laugh at myself about this one!
Jules -
Is there a way to get an alarm for my events for the iCal on the iPhone 4?
Is there a way to get an alarm for my events for the iCal on the iPhone 4?
Greetings,
See page 113 of the iPhone 4 user manual: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
When you add an event to the Calendar.app of the iPhone 4 there is an "Alert" option which should give you the desired result.
Cheers. -
No Email Alarm for All-Day Events
Hello, Everyone,
I've got a desktop and a laptop, and I've been syncing the iCal calendars on each for some time. However, this has resulted in one annoying thing - whenever an event comes up in iCal that I'd set an email alarm for, I would receive multiple alarms, one from each machine.
I thought I'd solve this problem by moving the calendars to my server (a headless Mini running 10.4.6 Server), and thus only get one email alarm. However, since I moved it, I'm getting no alarms.
I've run some tests, and confirmed that if I set up a test event at a specific time, I will get an email alarm for it. However, if the event is set up to be an all-day event, no alarm.
I've restarted the server, I've made sure the iCalScheduler is running...these calendars have worked for years, and now I'm perplexed. Any thoughts?
Cheers,
MartinWell, I couldn't figure this one out, so I just moved the calendars back to my main machine, and published them to the web for sharing with my laptop. On my main machine they worked fine.
Can't figure out why it wouldn't work on the server. Maybe it'll change with Leopard's iCal server. -
How can I remove default alarm for events in iCal on devices ios?
Whenever I add an event to my iCal calendar in Mounain Lion it will automatically add one default alert only on my iphone and ipad. These default alarms are not displayed on my macbook or icloud.com
Default alarms are disabled in macbook, icloud.com, and my ios devices.
How can I remove default alarm for events in iCal on devices ios?
Thanks and sorry for my english.
MacBook Pro, Mac OS X 10.8OK, so I have had this issue for the past several months. I think it all started when I upgraded to ML from SL and migrated my calendars and contacts to iCloud. That was a couple months ago. But now I am running 10.8.2, and about two weeks ago I upgraded my iOS devices to 6.0.1.
I don't seem to be having any issues with events that I create now, but all those old events that were migrated to iCloud a couple months ago, many of those sound alerts on the iOS devices even though there was no alert defined when the event was originally created. I have always had alerts off by default both in iCal and on the iOS devices.
So here's the question: is there a way to go through and disable all these spurious event alerts? I've been disabling them as the event reminders come up, but it's irritating. It would be nice if there was a way to turn them off all in one shot somehow. -
Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ... -
Creation of Server Proxy for Message interface with External Defination
Dear All,
I am getting a problem while generating a server proxy for the inbound interface . The request message used in the inbound interface is a external definition which is uploaded using a XSD file. The XSD file was supplied by a third party which is having very high complex strucuture and used lot of abstract data types in the design. When i tried to generate the proxy in the R/3 system (Transaction SPROXY) for the inbound interface i am getting following error.
Interface uses external and internal message definitions
Message no. SPRX122 *
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
Please guide me, how to generate the proxy for the interface with external defination message. I could nt geneate manullay, because it is having very high complexity and its a big structure.
Is there is any way to generate the proxy for interface with external definition
Regards
VijayanandHi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri -
2K8 - Best practice for setting the DNS server list on a DC/DNS server for an interface
We have been referencing the article
"DNS: DNS servers on <adapter name> should include their own IP addresses on their interface lists of DNS servers"
http://technet.microsoft.com/en-us/library/dd378900%28WS.10%29.aspx but there are some parts that are a bit confusing. In particular is this statement
"The inclusion of its own IP address in the list of DNS servers improves performance and increases availability of DNS servers. However, if the DNS server is also a domain
controller and it points only to itself for name resolution, it can become an island and fail to replicate with other domain controllers. For this reason, use caution when configuring the loopback address on an adapter if the server is also a domain controller.
The loopback address should be configured only as a secondary or tertiary DNS server on a domain controller.”
The paragraph switches from using the term "its own IP address" to "loopback" address. This is confusing becasuse technically they are not the same. Loppback addresses are 127.0.0.1 through 127.255.255.255. The resolution section then
goes on and adds the "loopback address" 127.0.0.1 to the list of DNS servers for each interface.
In the past we always setup DCs to use their own IP address as the primary DNS server, not 127.0.0.1. Based on my experience and reading the article I am under the impression we could use the following setup.
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: 127.0.0.1
I guess the secondary and tertiary addresses could be swapped based on the article. Is there a document that provides clearer guidance on how to setup the DNS server list properly on Windows 2008 R2 DC/DNS servers? I have seen some other discussions
that talk about the pros and cons of using another DC/DNS as the Primary. MS should have clear guidance on this somewhere.Actually, my suggestion, which seems to be the mostly agreed method, is:
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: empty
The tertiary more than likely won't be hit, (besides it being superfluous and the list will reset back to the first one) due to the client side resolver algorithm time out process, as I mentioned earlier. Here's a full explanation on how
it works and why:
This article discusses:
WINS NetBIOS, Browser Service, Disabling NetBIOS, & Direct Hosted SMB (DirectSMB).
The DNS Client Side Resolver algorithm.
If one DC or DNS goes down, does a client logon to another DC?
DNS Forwarders Algorithm and multiple DNS addresses (if you've configured more than one forwarders)
Client side resolution process chart
http://msmvps.com/blogs/acefekay/archive/2009/11/29/dns-wins-netbios-amp-the-client-side-resolver-browser-service-disabling-netbios-direct-hosted-smb-directsmb-if-one-dc-is-down-does-a-client-
logon-to-another-dc-and-dns-forwarders-algorithm.aspx
DNS
Client side resolver service
http://technet.microsoft.com/en-us/library/cc779517.aspx
The DNS Client Service Does Not Revert to Using the First Server in the List in Windows XP
http://support.microsoft.com/kb/320760
Ace Fekay
MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007 & Exchange 2010, Exchange 2010 Enterprise Administrator, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I agree with this proposed solution as well:
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: empty
One thing to note, in this configuration the Best Practice Analyzer will throw the error:
The network adapter Local Area Connection 2 does not list the loopback IP address as a DNS server, or it is configured as the first entry.
Even if you add the loopback address as a Tertiary DNS address the error will still appear. The only way I've seen this error eliminated is to add the loopback address as the second entry in DNS, so:
Primary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Secondary DNS: 127.0.0.1
Tertiary DNS: empty
I'm not comfortable not having the local DC/DNS address listed so I'm going with the solution Ace offers.
Opinion? -
How to use Start Task Group for Workflow Interface
Hi all,
anyone who can tell me how to use the Interface IFWFTSKGRP (Start Task Group for Workflow Interface)?
As far as I understood the documentation it can be used to restrict the selection of workflows that can be started in the Generic Object Services. But the question is how to implement it.
Best regards,
Carsten
Edited by: Carsten Drewes on Jun 10, 2009 10:30 AMHi, Carsten,
(probably it's a bit too late to post an answer after 3 years , but I'll post it in case someone else needs it)
You should implement GetTaskGroup method.
The code should return id of the task group (otype TG, mantained in PFTC) that holds the list of workflow definitions.
Here is a sample implementation. It's taken from FORMABSENC business object. It belongs to SAP demo workflow "Notification of Absence". I suppose it should be present in most systems and you can see it in action.
begin_method gettaskgroup changing container.
DATA: taskgroup LIKE rhobjects-object.
*- set task group
taskgroup = 'TG70000023'.
*- set result
swc_set_element container result taskgroup.
end_method. -
Which case we go for abap interface?
Hi friends,
As per my understand some scenario's are running with out PI integration.........those are called abap interfaces....
then which case we go for Pi? and which case we go for ABAP interface?
please help me on this...
Thanks & Regards
E.Ravi Chandra ReddyHi Ravi,
Understand this way,PI is not only for mapping.It is also used for doing the routing at the runtime.Suppose if you have A coming in the payload it should go to receiver X otherwise Y.
So,depends as per your business requirement.If you just want to integrate 2 system directly.You can go with that but suppose in future you have number of system,you cant do 1:1 connection everytime.At that time you require some middleware to integrate your scenario.
Regards,
Abhi
Maybe you are looking for
-
Since moving to snow leopard I'm having a large number of application crashes, especially in web browsers, (Firefox, Chrome) and Text Wrangler. The issue is reproducible, all I have to do is perform a "file - save as" function, the system hangs a bit
-
Custom Adaptor Module on Soap Receiver
Hi All, In PI 7.1.1 I have a soap receiver communication channel with a call to a simple custom adaptor module before and after the call to the XISoapAdaptorBean The call before works displaying the message in the call. It seems that the module is no
-
HT4061 My setting app is frozen
My setting app is fronzen in itunes & App store?
-
Is there a way to format my calendar groups?
I want to set up each event under my Birthday calendar group to remind me 5 days before every year.
-
How to delete mail in my iPhone?
How to delet old mail in my iPhone?