Prime 2.0 configuration management
Does PI 2.0 archive configs daily or do I need to schedule it?
How can I see config changes if someone changes the config on a device? Will PI alert that a change was made and what was changed by whom?
Yianni Thallas wrote:I don't believe that's possible with switches, maybe with ASA'sI could of swore one of the webinars i watched on PI mentioned that we would be able to see config changes
I don't see it used very often, but you can escalate syslog messages in IOS using Embedded Syslog Manager (ESM). See the configuration guide example here.
I recall getting the same impression as you. The webinar series that Eric and Tomar did on PI 2.0 was done with pre-release PI 2.0 software. It could be that feature didn't make the cut for FCS release of 2.0. Another thing to watch for in 2.1.
Similar Messages
-
SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"
Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help.. -
I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.
So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so. I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines. My already
deployed servers seem to have picked up the PKI setting no problem. In the past when I would deploy a new windows client everything would be fine. When i converted over to PKI in my test environment I am now having issues when I go to deploy a
new windows client. I don't get all of the Actions listed in the Configuration Manager control panel. All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
Cycles, before all of them would populate no problem. I have let this machine sit here for several hours and nothing has changed yet. It does say PKI for client certificate. Sometimes when I would deploy new machines it would say NONE for
Client certificate. In my production environment it says self-signed. I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
Ok so maybe not all the time that when i reinstall the client it fixes it. I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
Does anyone have any ideas?Hi,
I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
You can export and import the certificate by using MDT integration, try this blog for PKI part:
How To: Build and Capture in Configuration Manager 2012 using HTTPS
And in addition, you can upload the log to your onedrive so you can share with us.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Unable to copy hidden package "Configuration Manager Client Package" to local DP
Content status lists it as successfully distributed to all DPs (including the local site server)
However, component status for SMS_DISTRIBUTION_MANAGER continually logs these events:
Distribution Manager failed to process package "Configuration Manager Client Package" (package ID = CDW00001).
Possible cause: Distribution manager does not have access to either the package source directory or the distribution point.
Solution: Verify that distribution manager can access the package source directory/distribution point.
Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system.
Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility.
Possible cause: There is not enough disk space available on the site server computer or the distribution point.
Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point.
Possible cause: The package source directory contains files that might be in use by an active process.
Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
NOTE: It appears to not be any of these causes.
If I look at the smsdpmon.log on the server in question, the following is logged every half hour:
Intializing DP Monitoring Manager... SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting monitoring thread priority SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting content library root path SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting site code SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting algorithm ID SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find algorighm ID from registry. Use default algorithm. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting DP Cert Type SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find DP cert type from registry. Use default type. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting this DP NALPath SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to create certificate store from encoded certificate..
An error occurred during encode or decode operation. (Error: 80092002; Source: Windows) SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to initialize DP monitoring object. Error code: 0x80092002 SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
distmgr.log shows the following:
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANY.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.109 2013 ISTR0="CDW00001" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001" SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Retrying package CDW00001 SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
No action specified for the package CDW00001. SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Start validating package CDW00001 on server ["Display=\\BRICK-CONFIGMGR.corp.COMPANY.com\"]MSWNET:["SMS_SITE=CDW"]\\BRICK-CONFIGMGR.corp.COMPANYNAME.com\... SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Failed to start DP health monitoring task for package 'CDW00001'. Error code: -1 SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Updating package info for package CDW00001 SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Only retrying local DP update for package CDW00001, no need to replicate package definition to child sites or DP info to parent site. SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
StoredPkgVersion (2) of package CDW00001. StoredPkgVersion in database is 2. SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
SourceVersion (2) of package CDW00001. SourceVersion in database is 2. SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANYNAME.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.213 2013 ISTR0="Configuration Manager Client Package" ISTR1="CDW00001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001" SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Failed to process package CDW00001 after 41 retries, will retry 59 more times SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:45 PM 2124 (0x084C)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:50 PM 3784 (0x0EC8)
Sleep 1825 seconds... SMS_DISTRIBUTION_MANAGER 1/2/2013 1:29:50 PM 3784 (0x0EC8)Both errors are certificate related. Is there anything special about your configuration such as special ACLs on the certificate store or FIPS compliance mode (see
http://support.microsoft.com/kb/811833) being enabled?
Nothing special with certificates; I've used the basic stuff for intranet management of clients.
The only related thing I can think of that may have affected this, is that I discovered earlier today that my MP installation got hosed (error 500) due to a broken client install on the site server itself. I uninstalled the client manually and the server
(as indicated by the component status views) appears to have repaired the MP install. Perhaps it didn't repair it completely? Would a site reset do me any good? -
Is there a way to configure managed properties on a superclass?
Hi,
I'm looking for a way to set a managed property on a superclass of a managed bean rather than setting it on every single managed bean extending that superclass.
Here's a simple scenario. I've got an application scoped managed bean called "configuration" which holds (what a surprise) some configuration. It is configured like this:
<managed-bean>
<managed-bean-name>configuration</managed-bean-name>
<managed-bean-class>myapp.model.ConfigurationModel</managed-bean-class>
<managed-bean-scope>application</managed-bean-scope>
</managed-bean>
Now I want to use this bean from within some other request scoped managed beans (Let's say bean1 .. beanN). Of course I could inject the configuration bean into every single bean like this:
<managed-bean>
<managed-bean-name>bean1</managed-bean-name>
<managed-bean-class>myapp.model.Bean1</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>configuration</property-name>
<property-class>myapp.model.Configuration</property-class>
<value>#{configuration}</value>
</managed-property>
</managed-bean>
<managed-bean>
<managed-bean-name>beanN</managed-bean-name>
<managed-bean-class>myapp.model.BeanN</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>configuration</property-name>
<property-class>myapp.model.Configuration</property-class>
<value>#{configuration}</value>
</managed-property>
</managed-bean>
The Java code of each bean would look like this:
public class Bean1 {
protected Configuration configuration;
public void setConfiguration(Configuration aConfiguration) {
configuration = aConfiguration;
public class BeanN {
protected Configuration configuration;
public void setConfiguration(Configuration aConfiguration) {
configuration = aConfiguration;
One enhancement of this approach obviously is to define a super class for the beans which holds the configuration variable and its setter to prevent duplicate code. This would look like this:
public class SuperBean {
protected Configuration configuration;
public void setConfiguration(Configuration aConfiguration) {
configuration = aConfiguration;
public class Bean1 extends SuperBean {}
public class BeanN extends SuperBean {}
And now for the real problem. I'd like to use the advantage of using a superclass in the Java code on the faces configuration aswell. That means, I'd like to define the dependency injection only once for all beans extending SuperBean and not for every single bean. Probably like this:
<managed-bean>
<managed-bean-class>myapp.model.SuperBean</managed-bean-class>
<managed-property>
<property-name>configuration</property-name>
<property-class>myapp.model.Configuration</property-class>
<value>#{configuration}</value>
</managed-property>
</managed-bean>
<managed-bean>
<managed-bean-name>bean1</managed-bean-name>
<managed-bean-class>myapp.model.Bean1</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>beanN</managed-bean-name>
<managed-bean-class>myapp.model.BeanN</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
Of course this doesn't work because JSF does not lookup superclasses automatically. But I would be grateful if anyone has a solution or an idea for achieving this, because it would notably simplify the faces configuration.
These are the directions my own investigations took me so far:
- Using an "extends" attribute: <managed-bean extends="superbean">
This would be nice, but it would mean to use my own JSF implementation. I often use "extends" attributes on XML configurations, because it brings the pattern of inheritance with all its advantages to XML.
- Right now I'm checking if a custom PropertyResolver could do the trick.
Looking forward to your suggestions.
Regards
FrankThere is no way in the default JSF implementation.
You may consider to replace the getter by the outcome of FacesContext.getCurrentInstance().getExternalContext().getApplicationMap().get("configuration"); This will return the application scoped managed bean instance with the managed bean name "configuration". -
HOW TO CONFIGURE MANAGER or APPROVER USER IN ACCESS REQUEST MANAGEMENT TO APPROVE OR REJECT REQUEST
hi sap gurus,
i configured grc 10 system successfully. I created one user: GR_AR_APP001 and assign following roles:
SAP_GRAC_ACCESS_APPROVER
SAP_GRAC_ACCESS_REQUEST_ADMIN
SAP_GRC_FN_BASE
SAP_GRC_FN_NUSINESS_USER
and I maintained GR_AR_APP001 in access control owners as "POINT OF CONTACT", "SECURITY LEAD" and "WORKFLOW ADMINISTRATOR"
but when i am creating access request for new user and defining MANAGER under user details tab as GR_AR_APP001.
the user GR_AR_APP001 is not receiving any request for APPROVE or REJECT in his WORK INBOX.
can u please guide me how to configure APPROVER or MANAGER to approve or reject request.
I will be very much thankful if you guide me successfully.Hi Colleen,
thanks a lot for your time.
PIC1: I created one user: GR_AR_APP001
and assigned all the GRC ROLES.
PIC2: I assigned owner type to GR_AR_APP001 user : POINT OF CONTACT, SECURITY LEAD and WORKFLOW ADMINISTRATOR in NWBC ACCESS CONTROL OWNERS
PIC3: I created one EUP 980 (copied from default EUP)
PIC4: I maintained default manager as GR_AR_APP001 user in 980 EUP
PIC5: I selected SAP_GRAC_ACCESS_REQUEST process id
PIC6: I created one agent id as ZGRAC_MANAGER11 in which I added approver user id: GR_AR_APP001
PIC7: I saved agent id
PIC8: I added agent id as ZGRAC_MANAGER11 in stage5 in manager stage.
PIC9: I saved
PIC10: I maintained EUP 980 (in which I configured manager as GR_AR_APP001 user) in stage 5 task settings
PIC11: Maintain Route Mapping, I clicked on next
PIC12 and PIC13: I saved and activated.
After this process I created one request for new account and selected the manager as GR_AR_APP001 and one request is created with request no 9000000030.
now I logged into system by user GR_AR_APP001 and checked, there is no request under his work inbox.
please guide me at least one procedure, how to receive request in approver work inbox so that I can learn other procedures to configure approver as per our organization requirement.
thanks for your support Colleen. -
How to configure Oracle Configuration Manager in R12.0.4
Dear
I need to configure oracle configuration manager for my running R12.0.4 instance on single node setup.Whenever i try update my metalink credentials in oracle application manager dashboard,it says userid or password is wrong. While installation i skip the OCM screen. How can i configure it now either using Universal installer or comand line? Need all steps for setup?
Do i need to download & install OCM client or is it already shipped with software & needs just configuration setup?
Help me!
RegardsAteeq,
Running AutoConfig should populate profile options with the correct values. However, you can check the values after running AutoConfig to verify it.
According to metalink document id, this Applications Server-Side Proxy Host And Domain profile needs to changed. Document id, will mention later.I forgot.Below are the notes:
Note: 297689.1 - Unable to update MetaLink credentials from OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=297689.1
Note: 308369.1 - Unable to Connect to MetaLink from OAM After Updating MetaLink Credentials
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=308369.1 -
Configuration Manager services stoping on regular basis.
we have installed and configured WebCenter Interaction 10.3 on Windows 2003 (x86) and using JVM 1.5.0_09.
Running all the component as windows services. Today our Configuration Manager services is stopping on regular basis.
Error:
================================================================================================
STATUS | wrapper | 2009/08/06 06:14:48 | --> Wrapper Started as Service
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.2', '%JVM_2%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.3', '%JVM_3%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.4', '%JVM_4%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.5', '%JVM_5%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.6', '%JVM_6%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.7', '%JVM_7%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.8', '%JVM_8%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.9', '%JVM_9%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.10', '%BIT_MODE%' is not a valid argument to the jvm. Skipping.
STATUS | wrapper | 2009/08/06 06:14:48 | Launching a JVM...
INFO | jvm 1 | 2009/08/06 06:14:50 | Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
INFO | jvm 1 | 2009/08/06 06:14:50 | Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | WARNING - Unable to load the Wrapper's native library 'wrapper.dll'.
INFO | jvm 1 | 2009/08/06 06:14:50 | The file is located on the path at the following location but
INFO | jvm 1 | 2009/08/06 06:14:50 | could not be loaded:
INFO | jvm 1 | 2009/08/06 06:14:50 | C:\bea\alui\configmgr\2.0\bin\..\..\..\common\wrapper\3.2.3\lib\native\win32\wrapper.dll
INFO | jvm 1 | 2009/08/06 06:14:50 | Please verify that the file is readable by the current user
INFO | jvm 1 | 2009/08/06 06:14:50 | and that the file has not been corrupted in any way.
INFO | jvm 1 | 2009/08/06 06:14:50 | One common cause of this problem is running a 32-bit version
INFO | jvm 1 | 2009/08/06 06:14:50 | of the Wrapper with a 64-bit version of Java, or vica versa.
INFO | jvm 1 | 2009/08/06 06:14:50 | This is a 64-bit JVM.
INFO | jvm 1 | 2009/08/06 06:14:50 | Reported cause:
INFO | jvm 1 | 2009/08/06 06:14:50 | no wrapper in java.library.path
INFO | jvm 1 | 2009/08/06 06:14:50 | System signals will not be handled correctly.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:50 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 06:14:50 | 8-6-2009 6:14:50.872 Info OpenKernel.Config Disabled-1249553690622 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 06:14:51 | 8-6-2009 6:14:51.419 Info OpenKernel.Config Disabled-1249553690622 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Setting subscription data.
INFO | jvm 1 | 2009/08/06 06:14:51 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.coyote.http11.Http11Protocol init
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initializing Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.Catalina load
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initialization processed in 1157 ms
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardService start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting service cm
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardEngine start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Deploying web application archive cm.war
INFO | jvm 1 | 2009/08/06 06:14:55 | Aug 6, 2009 6:14:55 AM org.apache.catalina.realm.JAASRealm setContainer
INFO | jvm 1 | 2009/08/06 06:14:55 | INFO: Set JAAS app name cm
INFO | jvm 1 | 2009/08/06 06:14:55 | 06 Aug 2009 06:14:55,810 INFO - Reading standard config org/apache/myfaces/resource/standard-faces-config.xml [FacesConfigurator:151]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/jsf-facelets.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols-framework.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/tomahawk-1.1.3.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config /WEB-INF/faces-config.xml [FacesConfigurator:411]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,341 WARN - Locale name in faces-config.xml null or empty, setting locale to default locale : en_US [LocaleUtils:52]
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: Registered application name: OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - ServletContext 'null' initialized. [StartupServletContextListener:99]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - Serialization provider : class org.apache.myfaces.shared_impl.util.serial.DefaultSerialFactory [StartupServletContextListener:140]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,185 INFO - Root WebApplicationContext: initialization started [ContextLoader:174]
INFO | jvm 1 | 2009/08/06 06:14:57 | Aug 6, 2009 6:14:57 AM org.apache.catalina.core.ApplicationContext log
INFO | jvm 1 | 2009/08/06 06:14:57 | INFO: Loading Spring root WebApplicationContext
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - JDK 1.4+ collections available [CollectionFactory:76]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - Commons Collections 3.x available [CollectionFactory:80]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,294 INFO - Loading XML bean definitions from ServletContext resource [WEB-INF/applicationContext-acegi-security.xml] [XmlBeanDefinitionReader:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,607 INFO - Bean factory for application context [Root WebApplicationContext]: org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy [XmlWebApplicationContext:100]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,622 INFO - 9 beans defined in application context [Root WebApplicationContext] [XmlWebApplicationContext:322]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate MessageSource with name 'messageSource': using default [[email protected]9d] [XmlWebApplicationContext:473]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ApplicationEventMulticaster with name 'applicationEventMulticaster': using default [org.springframework.context.event.SimpleApplicationEventMulticaster@f0f2f1e] [XmlWebApplicationContext:495]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ThemeSource with name 'themeSource': using default [[email protected]f0fdecd] [UiApplicationContextUtils:83]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Pre-instantiating singletons in factory [org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy] [DefaultListableBeanFactory:261]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Validated configuration attributes [AbstractSecurityInterceptor:220]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Using context class [org.springframework.web.context.support.XmlWebApplicationContext] for root WebApplicationContext [ContextLoader:189]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Root WebApplicationContext: initialization completed in 703 ms [ContextLoader:199]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Initializing filter 'RequestContextFilter' [RequestContextFilter:152]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Filter 'RequestContextFilter' configured successfully [RequestContextFilter:177]
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:57 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Deploying web application archive ROOT.war
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.coyote.http11.Http11Protocol start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Starting Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.catalina.startup.Catalina start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Server startup in 4531 ms
INFO | wrapper | 2009/08/06 07:10:02 | User logged out. Ignored.
INFO | wrapper | 2009/08/06 07:10:03 | User logged out. Ignored.
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 07:10:04 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Closing application context [Root WebApplicationContext] [XmlWebApplicationContext:599]
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Destroying singletons in {org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy} [DefaultListableBeanFactory:272]
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009 7:10:04.279 Info OpenKernel.Config Disabled-1249557004060 Wrapper-Shutdown-Hook com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 07:10:04 | INFO: PmbApplication.run() exiting forcefully... Releasing one worker thread.
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009 7:10:04.810 Info OpenKernel.Config Disabled-1249557004060 Wrapper-Shutdown-Hook com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Setting subscription data.
INFO | jvm 1 | 2009/08/06 07:10:04 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
STATUS | wrapper | 2009/08/06 07:10:06 | <-- Wrapper Stopped
============================================================================
When we are starting , it stays for couple of mins say 10/15 mins then it stops.
Can any body have any idea what should i do to get it resolved.The logs look odd to say the least on start up and there are couple items when the service gets the signal to shutdown that are suspicious.
My suggestion is to troubleshoot top down. Clean up the discrepant messages upon startup.
message : INFO
Please verify that the file is readable by the current user
and that the file has not been corrupted in any way.
One common cause of this problem is running a 32-bit version
of the Wrapper with a 64-bit version of Java, or vica versa.
This is a 64-bit JVM.
Are you attempting change the existing out of box JVM?
You know it doesn't use sun jvm anymore. It's JROCKIT.
Make sure your JVM Settings are as follows:
C:\bea\alui\configmgr\2.0\settings\config\wrapper_base.conf
# Java Application
wrapper.java.command=%JRE_PATH%/bin/java
THEN Verify:
CMD
cd C:\bea\alui\common\jre\1.5.0_32\
java -versionYou should get something like.
java version "1.5.0_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
BEA JRockit(R) (build R27.4.0-90-89592-1.5.0_12-20070928-1715-windows-ia32, comp
iled mode)
In any case, your enviroment seems funky. Use the tips above to troubleshoot.
Troubleshoot this error first and find out why it thinks your using a 64 bit JVM versus a 32 bit one.
Last tip: Place Logging into Debug to see whether more logging will give you further insight into the problem.
Hope this helps!
Cheers!!! -
Configuration Management/Change Control/Build Management contract help needed in Missouri*** *** **
Configuration Management/Change Control/Build Management
Needs to have instituted a config management process before.
web development history
Tools/Skills:
CVS
ANT
Unit Testing
Unix
BEA Weblogic
John D Allen
CEO/President.
Leveridge Systems INC.
v1 (480) 899 9341
mailto:[email protected]
http://www.leveridgesystems.comCould you post an example of your problem ?
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
Can't create Source Instance in Configuration manager (BI Apps 11.1.1.7.1)
Hi
While configuration i created one source instance for EBS R12.1.3 but I logged into to ODI client Studio and By mistake i deleted 'Data Server' from Topology which i created during Source Instance Creation/configuration on Configuration Manager(CM).
It wasn't intentionally by mistake i deleted. Due to that reason i am not able to edit source instance. once i try to edit when i save it error pop-ups ""Error: ODI-10182: uncategorized exception during repository access. ORA-00001: unique constrain (DEV_BIA_ODIREPO.AK_CONNECT) violated" .
Its was bug but after ODI 11.1.1.6.0 they fix it
Metalink Note (
1- Note 1545938.1: ODI-10182 and ORA-02292 Errors Signalled After Deleting Unnecessary Datastore in ODI 11g Integration Interface
2- BUG
https://support.oracle.com/epmos/faces/BugDisplay?_afrLoop=96427980024293&id=13916069&_afrWindowMode=0&_adf.ctrl-state=1536syzwe9_437
However I tried following Cases:
1- Tried to Edit Source Instance from Configuration manager (CM) but Gave me Error: "Error: ODI-10182: uncategorized exception during repository access. ORA-00001: unique constrain (DEV_BIA_ODIREPO.AK_CONNECT) violated".
2- Tried to Create New Data Server by using Same Source Source Instance on Configuration manager (CM). Failed with error message:'Source system invalid '.
3- Tried to re-create Same Data Server Name in ODI Studio with Same name. Failed due to error: "Alread Data Server exists"
So no success so far. I am trying to edit source System Instance but no success so far.
Versions:
OBI Apps: 11.1.1.7.1
OBIEE: 11.1.1.7.0
ODI: 11.1.1.7.0
Database: Oracle 11.2.0.3
OS: Windows 2008 R2
regards
sher ullah baigI rise SR with oracle and they offered below solution, i hope it will help someone.
How to delete a source system?
The Configuration Manager user interface does not include a way to delete a source system. In the Define Business Intelligence Applications page you can only add or edit a source system.
By manually removing the source system from Oracle Data Integrator and from the tables in the back-end database you can effectively delete a source system.
To manually delete the source system:
1. Connect to the application database through a utility such as SQL*Plus or SQL Developer, logged in as the same user configured in the WebLogic data source.
2. Find the source system identifier number of the source system you want to delete by executing the following SQL and looking at the value of column DATASOURCE_NUM_ID:
SELECT DATASOURCE_NAME, DATASOURCE_NUM_ID FROM C_DATA_SOURCE;
3. Go to ODI Studio and delete the physical schema associated with the source system.
4. In ODI Studio go to the respective logical schema:
2.1. Go to flexfield tab
2.2. Mark the checkbox for Data source num id flexfield to use default value.
5. In SQL*Plus or SQL Developer execute the following statements where the bind variable, :Bind_DatasourceNumId, is set to the value of the source system identifier. These SQL statements may also be placed in a script, if needed for later use.
DELETE FROM C_DATA_SERVER WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_DATA_SOURCE_DISABLEDOFFR_REL WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_EXECUTION_PLAN_FACTGROUP_REL WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_LOAD_PLAN_GENERATION_STEP WHERE EXECUTION_PLAN_ID IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN WHERE EXECUTION_PLAN_ID NOT IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN_FACTGROUP_REL));
DELETE FROM C_EXECUTION_PLAN WHERE EXECUTION_PLAN_ID NOT IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN_FACTGROUP_REL);
DELETE FROM C_SRC_DOMAIN_MEMBER_TL WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_SRC_DOMAIN_MEMBER WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_DOMAIN_MEMBER_MAP WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_PARAM_DW_VAL WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_PARAM_DW_VAL_AUDIT WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
DELETE FROM C_DATA_SOURCE WHERE DATASOURCE_NUM_ID = :Bind_DatasourceNumId;
COMMIT;
=========================================
Regards
Sher ullah baig -
How do I install Oracle Configuration Manager in oracle Fusion - discoverer 11i
Hello Gurus,
I need some guidance to install Oracle Configuration Manager.
I have just successfully installed Oracle Fusion - following "Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1.6.0) (Part Number E10421-07)" without OCM. I have EBS 12.1.3 and rdbms 11.2.0 on the same server.
Thanks
Mathiasikaros wrote:
I have installed OracleAS 10g. What should I download now in order to install Oracle Portal 10g?Portal (actually Portal and wireless) is one of the three installation types of a full-fledged OAS 10g in release 1 and 2.
You need to have an infrastructure as a pre-requisite for a portal type OAS installation.
Please see this [link and the whole guide - click Content on the top-right|http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/mt.htm#sthref508] for details and then decide what have you installed that you are referring to as OAS 10g.
thanks,
AMN -
Configuration Manager 2012 SP1 for Windows XP\Win 7\Win 8\Win 8.1 to Windows 8.1 Update 1
Hi Team,
We have Configuration manager 2012 SP1 and we have requirement to migrate winXP\Win7\Win8\Win8 systems to Windows 8.1 update 1. We are looking for supporting replace, refresh and baremetal OS deployments. Can anyone give some pointers for things we need
to take care while planning approach for migrations. OS image for windows 8.1 update 1 are created through MDT 2013 and we are planning to use Config manager 2012 SP1 for deploying these images with above scenarios.
Regards,More info:
Operating System Deployment in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682018.aspx
OSD in System Center 2012 Configuration Manager
http://www.microsoft.com/en-us/download/details.aspx?id=42959
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I have read that in order to process my .xlsx file using Microsoft.Jet.OLEDB.4.0 Connection String I need to create a "x86" Active Solution Platform.
Welllll, when I <Right-Click> on my Solution in Microsoft Visual Studio, and <Click> on
Configuration Manager and then <Click> the Active solution platform
and choose <New...> absolutely nothing happens. How can I try and create a new
Active solution platform if nothing happens and I don't get a dialog box or window?
Am I doing something wrong here?
Do I have a Setting that is incorrect?
Thanks for your review and am hopeful for a reply.
ITBobbyP85Hi ITBobbyP85,
After testing the issue in my SSIS project, I also couldn’t add a new Active solution platform in the SSIS project.
As per my understanding, I think the Active solution platform doesn’t supported in Business Intelligence projects (SSAS, SSRS and SSIS). If the project is application project(C#, VB, etc.), by default, the target platform is x86. And we can also configure
the project to target to a 64-bit platform. For more details about how to configure projects to target platforms, please see:
http://msdn.microsoft.com/en-IN/library/ms185328.aspx
The following screenshots are for your references:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
The request failed with HTTP status 404: Not Found.
(!) SRS not detected as running
Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
Figure 1
From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
Figure 2
2. Open the Console log file, it also shows some valuable information.
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
ProviderName = "WinMgmt";
\r\n
[1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
Figure 3
It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
SELECT
name,
value2
FROM dbo.SC_SysResUse_Property
where name
='ReportServerUri'
or name=
'ReportManagerUri'
Remarks:
This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
is to reinstall your Reporting Service Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
http://www.enhansoft.com/ -
Configuration Manager 2012 R2 - SRS Reporting Services not configuring Report Server
Hi all,
I am running stand-alone primary site and remote (shared) SQL 2012 SP1 on Windows 2012 R2 Standard. Remote SQL server is currently hosting multiple instances and Configuratoin Manager is running on a custom instance. SCOM databases also co-exist on the same
SQL environment (different instance with SSRS installed & running perfectly).
After setting up the Reporting Services role on Configuration Manager environment, srsrpsetup.log & srsrpMSI.log states installation is successful. However, when monitoring srsrp.log file, we encounter the below message -
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 5232 (0x1470).
SMS_SRS_REPORTING_POINT 02/12/2014
07:44:00 7828 (0x1E94)
This is a SRS Reporting Point Role as SRSRP registry key exists.
SMS_SRS_REPORTING_POINT 02/12/2014 07:44:15
5232 (0x1470)
Waiting for changes for 0 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check state SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check server health. SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Registry change SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:45:15 5232 (0x1470)
Steps taken so far -
1. Switched reporting services to run from local system account to domain account.
2. Created new Report Server database on our instance and reconfigured Reporting Services to this DB.
3. Un-installed and re-installed Reporting Services role in Configuration Manager
4. Un-installed and re-installed SSRS on Configuration Manager (dedicated) SQL instance after removing Reporting Services role in CM12.
I have referred couple of links on forum and none seem to help resolve this issue.
Let me know if there is anything specific I missed out from my end. Appreciate any assistance.
Regards,
mittuIt seems that Reporting Services for SCOM and SCCM cannot co-exist on the same server (it sounds like a bad idea anyway)
http://www.systemcentercentral.com/system-center-2012using-a-common-sql-backend-database-sysctr-scom-scsm/
https://social.technet.microsoft.com/Forums/en-US/7e6b5ae9-04c8-4c5d-a77f-9f5208d4e65f/is-it-possible-to-deploy-2-scom-2012-r2-reporting-in-a-sql-server-which-already-has-scom-reporting?forum=operationsmanagerreporting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0332b156-bc36-4699-8775-a561915f35ab/scom-2012-reporting-components-with-a-shared-sql-cluster?forum=operationsmanagerdeployment
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
Flashing black screen when pasting?
I have a student that when she pasted some image (jpg) and text elements from from one indesign cs4 document to another the indesign window would flash black then part of what she was pasting would appear. Then it would flash black again and the res
-
Possibility of creating combination chart Barchart/Line graph within OBIEE
Hi Is it possible to create a combination chart within OBIEE as can be done in Excel by changing the chart type on one of the individual series - ie graph multiple series of data as a combination of Barchart & Line series? Any info appreciated Thanks
-
Central User Management Implementation
H In one of our customer landscape, there are 10 prod instances and Virsa is checking the conflicts against each system. Now the customer would like to adopt to Central User Management (where users and roles are maintained centrally from one instance
-
How can page margins be changed when printing from Firefox for Mac OS X?
This has been asked in the past with the thread closed even though the asker got no answer. I have the same problem so I am asking again.... How does one set the margin sizes on Firefox on the Mac?
-
Do you guys think that the next version of flash will include Adobe's live trace instead of the usual flash trace bitmap feature?