Prime 2.0 support for Multicontext ASA.
Does Prime 2.0 support support below equipments:-
5585/5525-X Multicontext mode ASA
WSA/ESA
Also once i remove WLC 5508 and iam not able add it for some reason,Iam running SNMP V3.
Your inputs will be much apreciated.
If it is anything like LMS 4, it treats each context as a separate object. Configure an IP on each context and add that to Prime.
Similar Messages
-
User Tracking supported for Nexus 5K in Prime Infrastructure 1.3
Hi,
Is User Tracking supported for Nexus 5K in Prime Infrastructure 1.3?
Regards
Francois BouchardHi Andy,
Check the below link , as per this Doc .. User tracking is supported in 2.0:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
Thanks-
Afroz
[Do rate the usefu post] -
Does anyone know if Cisco has the PBR feature road mapped for future IOS releases or if they are building in new feature sets to load balance 2 different ISP connections much like F5. It seems more and more customers are asking for all in one functionality from their NextGen firewalls and the ASA seems to fall short in this category.
As of right now, you can do PBR on the ASA when the ASA is in a cluster. I am uncertain if there will be support for PBR or loadbalancing on a standalone ASA in the future.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ha_cluster.html#pgfId-1943033
Please remember to select a correct answer and rate helpful posts -
Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches
Hello together
I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
Version Support Type: Device Update
So I updated all device updates I was able to find.
Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
- Cisco View -> works
- Inventory and Config Collection -> works
- Fault Monitor not working -> Error Code Unsupported
- Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
- VLAN Management -> Doesn't work
- User Tracking > seems also not to work
When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
C3560C-8PC-S .1.3.6.1.4.1.9.1.1466
C3560CG8PC .1.3.6.1.4.1.9.1.1317
C3560CCG8TC .1.3.6.1.4.1.9.1.1318
wsC3560CPD8ptS .1.3.6.1.4.1.9.1.1368
Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
Thanks for any feedback ErichThanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian. -
Does Cisco Prime have support for HP Access Points?
I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
I cannot find listed in the documentation whether Cisco Prime has support for the HP access points though. I see it has 'some' support listed for some Aruba controllers, but not anything else.I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
Prime will only support products with a "Cisco" logo.
Note: Prime 2.2 will start supporting Meraki product. -
IS Prime DCNM support for 2960 switches
Hi All,
There is a requirement for a NMS solution, Solution must have a single dashboard
but in the netwroks i am having 2960s, N2K, N5K, N7K, in order to mange this data-center network
do I need to quoted for Cisco LMS and DCNM or LMS is enoughThe most comprehensive single product solution for those set of devices would be LMS. It does have limitations in managing the User Tracking, VLAN (provisioning primarily) and SAN aspects of the data center switches. Note Nexus 2ks are not separately managed, but rather viewed as an integral part of their controlling 7k or 5k.
LMS Catalyst 2960 support described here.
LMS Nexus support described here.
DCNM is not really designed for IOS-based devices. It has some very limited support for the Catalyst 6500 but other than that it is primarily focued on the NX-OS-based data center products. See the DCNM Release Compatibility Matrix for more details. (And add the DCNM 6.1 release notes updates.) -
How to Support IDS in ASA 5505 and 5520?
Dear All;
we have the following HW configuration for the ASA 5505 and ASA 5520, We need to add the Intrusion Detection System (IDS) functionality to both ASA. My question is: what is/are the module(s) required to support this function, and what is the deference between IPS and IDS, does the the same Module do the both functionality?
Part No
Description
QTY
ASA5505-BUN-K9
ASA 5505 Appliance with SW 10 Users 8 ports 3DES/AES
1
CON-SNT-AS5BUNK9
SMARTNET 8X5XNBD ASA5505-BUN-K9
1
SF-ASA5505-8.2-K8
ASA 5505 Series Software v8.2
1
CAB-AC-C5
AC Power Cord Type C5 US
1
ASA5500-ENCR-K9
ASA 5500 Strong Encryption License (3DES/AES)
1
ASA5505-PWR-AC
ASA 5505 AC Power Supply Adapter
1
ASA5505-SW-10
ASA 5505 10 User software license
1
SSC-BLANK
ASA 5505 SSC Blank Slot Cover
1
ASA-ANYCONN-CSD-K9
ASA 5500 AnyConnect Client + Cisco Security Desktop Software
1
Part No
Description
QTY
ASA5520-BUN-K9
ASA 5520 Appliance with SW HA 4GE+1FE 3DES/AES
2
CON-SNT-AS2BUNK9
SMARTNET 8X5XNBD ASA5520 w/300 VPN Prs 4GE+1FE3DES/AES
2
ASA5520-VPN-PL
ASA 5520 VPN Plus 750 IPsec User License (7.0 Only)
2
ASA-VPN-CLNT-K9
Cisco VPN Client Software (Windows Solaris Linux Mac)
2
SF-ASA-8.2-K8
ASA 5500 Series Software v8.2
2
CAB-ACU
AC Power Cord (UK) C13 BS 1363 2.5m
2
ASA-180W-PWR-AC
ASA 180W AC Power Supply
2
ASA5500-ENCR-K9
ASA 5500 Strong Encryption License (3DES/AES)
2
ASA-ANYCONN-CSD-K9
ASA 5500 AnyConnect Client + Cisco Security Desktop Software
2
SSM-BLANK
ASA/IPS SSM Slot Cover
2
Thanks in advance.
Rashed Ward.Ok, I was not quite correct in my first post.
Those modules - only modules available for corresponding ASA models.
They all may act as IPS (inline mode) or IDS (promiscuous mode), depending on how you configure your policies.
When it acts like IPS, ASA directs all traffic through the module, so all the traffic is inspected and can be dropped inline if some signature fires.
When it acts as an IDS, ASA just copies traffic to the module for inspection, but actual traffic flow is not affected by the module, as it's not inline in this case.
Plus, those modules may be comdination of both modes. I.e. some traffic might be inspected inline, when some other (more sensitive) traffic can be inspected in promiscuous mode.
To understand this better, get familiar with this link:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/modules_ips.html -
Support for HTML and CSS properties
My biggest frustration with Acrobat Pro 9 is that it dropped support for certain HTML and/or CSS properties that were available in Acrobat Pro 8. In particular, the page-break-before attribute no longer works, nor does colspan. When I convert an HTML table with some colspans into a PDF, the table looks okay to the naked eye, but the structure behind the table (PDF tags) is incorrect.
I can live without the page breaks, but I need colspan. I need to do this for hundreds of tables, so opening the Acrobat Table Editor and fixing the colspan by hand is not an option. A scripting/programming solution is required. Has anyone found a workaround? Does Acrobat X fix this problem?hello
not trying to hijack the thread but needed some clarification
your very short tutorial
http://alt-web.blogspot.com/2012/11/primer-for-using-jquery-plug-ins.h tml
was really informative. Just have a couple quick questions:
you state:
"the core code library which you ref in your <head> tags,"
the below code just has to be declared ONCE at the beging in your head section, correct?
<!-- jQuery latest core library from CDN-->
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js">
</script>
then any number of jquery plugin scripts can be placed in ANY order in your head section following the above code, correct?
"the function code inside <script> tags to invoke the plug-in."
so then in the body, does the functions code have to come RIGHT AFTER the place it is being used?
example
<body>
<div class="slideshow1"
</div>
<!--Plug-In Function Code1-->
<script type="text/javascript">
</script>
<div class="slideshow2"
</div>
<!--Plug-In Function Code2-->
<script type="text/javascript">
</script>
</body>
or can you take all the function codes and paste them in the end outside of the respective divs that are using the code?
ie does the position of the code matter?\
thanks guys
Nancy O. wrote:
Try jQuery Fancybox
http://fancybox.net/
If you're new to using jQuery plugins, see this primer:
http://alt-web.blogspot.com/2012/11/primer-for-using-jquery-plug-ins.h tml
Nancy O. -
Dynamic Routing Protocol Support in Cisco ASA Multiple Context Mode
Dear Experts,
Wold like to know whether dynamic Routing Protocol Support in Cisco ASA Firewall Multiple Context Mode. If yes then please provide OS version and Hardware Model of Cisco ASA Firewall. Appreciate the quick response. Thanks.Hi,
Check out this document for the information
http://www.cisco.com/en/US/docs/security/asa/roadmap/asa_new_features.html#wp93116
Its lists the following for software level 9.0(1)
Multiple Context Mode Features
Dynamic routing in Security Contexts
EIGRP and OSPFv2 dynamic routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing are not supported.
Seems to me you would need some 9.x version to support the above mentioned Dynamic Routing Protocols.
I don't think its related to the hardware model of the ASA other than that it requires a model that supports Multiple Context Mode. To my understanding the only model that doesnt support that is ASA5505 of the whole ASA5500 and ASA5500-X series.
Hope this helps
- Jouni -
Interactive Commands in NetConfig for Cisco ASA
Hi,
Maybe anyone knows, does CiscoWorks LMS supports this feature for Cisco ASA or I'm doing something wrong? I've sent interactive command "copy tftp: flash: <R>ip_address<R>asa841-k8.bin<R><R>" to my ASA using netconfig tool and recived error "Command(s) failed on the device Insufficient no. of interactive responses(or timeout) for command: copy tftp: flash: ." For Cisco Catalyst it works fine. I have a last version of CiscoWorks 4.0.1.No, SWIM doesn't support ASDM upgrades, but what you're doing here is a system software upgrade. What you might try doing is to increase the telnet timeout for this device. Unfortunately, that feature is hidden in LMS 4.0, but see this document on how to do that:
https://supportforums.cisco.com/docs/DOC-15162
The document talks about inventory collection, but the interface to adjust the telnet timeout is in the same location as the SNMP timeout. You'll want to time the transfer to know how long to make the timeout. -
Hi All,
I want to know what all fail-over I can build for single ASA. I am planning to connect as per the attached.
Please let me know all configuration that i can build. Do i need to assign 2 ip's for that 2 interfaces connected to inside,dmz and outside.
Please let me know if you any other design.
Regards,
Satya.MHi Satya,
You cannot assign IP's of the same subnet to two different interfaces of the ASA in the routed mode. So as per your diagram, you cannot connect Inside interface of the ASA to both the 6504E switches or to the DMZ switches as you have shown. If you want to do such a failover, you can use 2 ASA's with Active/Standby failover while connecting ASA-1 to 6504EGa and ASA-2 to 6504EGb. You can also do Active/Active failover.
Also with 1 ASA, if you want to configure 2 ISP's on 2 interfaces, please remember policy based routing is not supported on ASA so at any gien time only 1-ISP will be active for all the traffic going out. You can have the failover configured so that everything fail's over to the secondary ISP when Primary goes down with tracks etc.
I hope this helps. If not, can you please post your exact requirements for the failover so that we can suggest you better.
Best,
Raghav -
Obtaining hardware and signature support for AIP SSM-10
We have a 5510 which we have purchased an AIP SSM-10 card for the ASA which is already under a support contract. We now wish to add hardware maintenance for the new AIP SSM-10 card as well as signature updates. Our Cisco supplier will not confirm that we will receive signature updates with the hardware support though (we have been trying to get an answer from them since June or July now).
Could someone let us know what the correct part number is so we can ask for the specific option that will provide both hardware cover and signature updates.i think this is what you need,
CON-SU1-AS1A1PK9
IPS SVC, AR NBD ASA5510-AIP10SP-K9
cisco smartnet support -
[svn] 3219: Checking in support for Network Monitor in rpc.swc
Revision: 3219
Author: [email protected]
Date: 2008-09-16 01:33:39 -0700 (Tue, 16 Sep 2008)
Log Message:
Checking in support for Network Monitor in rpc.swc
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/DirectHTTPChannel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractInvoker.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractOperation.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/AbstractOperation.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/soap/Operation.as
Added Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/
flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/NetworkMonitor.asa pretty smart monitor worthy to recommend to all kids-concerned parents and employee-concerned bosses: employee activity monitor.
Learn morefrom here:
www.employee-activity-monitor.com -
Speedgrade support for .MTS files
Hello,
I'm excited about CS6. I shoot a Panasonic GH-2 that records H.264 in .MTS. This is hacked and shoots at around 150mb/s. Does Speedgrade read .MTS? I'd rather not transcode. Premiere runs fine with the MTS files.
Also, when you send out from Premiere to Speedgrade, will Premiere reflect the look/grading changes? I guess I shoyld ask this in a different topic.
Thanks
MaxAdobe has announced las April that they will update their Creative Suite once a year somewhere between April and July (Q2). I think is a save assuption that SpeedGrade will get an upgrade by then. Consider that the programmers had less then half a year to deliver SG CS6... (Iridas was aquired in September 2011, and CS6 was launched in April 2012. And I know the testing and delevery of software takes about 3 months, you can do the math).
I am expecting a lot form the next version as the programmers had a full year to work on integration, codecs, support for various workflows etc.
So, prime time, if you want to call it that, should probably be somewhere in April at the earliest. -
I previously had several pix's with PPTP setup and running the vpdn pptp tunnel to all windows user direct access into networks. It seems as though PPTP is not supported on the ASA. Is this true?
Hi,
ASA does not support pptp.
Please refer the below URL for details.
http://www.cisco.com/en/US/docs/security/asa/asa70/release/notes/asa_rn.html#wp209031.
I hope it helps.
Regards,
Arul
** Please rate all helpful posts **
Maybe you are looking for
-
Can I embed a picture in an email so that it does not show up as an attachment?
Can I embed a picture in an email so that it does not show up as an attachment?
-
Why is the music store so slow
I downloaded the new version of itunes and it is still running SOOOOO slow
-
Severe corruption of .MOV files in Lightroom & unusable processing speed
Hi all, I run on an Intel i7 quad core, 12 GB Ram, 2 GB Graphics Card (nvidia), Raid 0, 2x512 GB Harddisk space (1 TB), Windows Vista 64bit using the latest cut of Lightroom 3.4.1 64bit. Using a Canon 7D with latest firmware updates, for RAW/JPG/MOV
-
[solved] Packages for system notification sounds?
Hi there, Are there some packages in the repos that provide some notification sounds (bell sound, alarm, etc.) that I can use in my own bash scripts? If so, which one do you use? Thank you! Last edited by orschiro (2014-06-08 12:13:50)
-
Why are podcasts still downloading?
I noticed there was an issue with the last update (11.2.1) where podcasts were unexpectedly downloading. The new update (11.2.2) states that it "fixes a problem where certain podcast episodes may download unexpectedly after upgrading". However since