Prime 2.1 and Nexus netflow

I have installed Prime 2.1 for evaluation while waiting on licenses. I have Netflow working from my 2921 and 3945 routers but cannot get the Nexus 7010's to work. Nexus defaults to version 9, but I do not see any templates in 2.1 for version 9. I set the Nexus exporter to be version 5 but still see nothing. Also, the Nexus is communicating on the mgmt port to the Prime 2.1 infrastructure. Does anyone have this working?

Yes, all device packages are installed (including 7.0) and the Pi 2.1.2 patch.
Info from "ifm_config_archive.log" when trying Archive the Configuration:
[2014-12-09 19:58:11,300] [pool-37-thread-5] [service] [ERROR] - Thread Id : [9,460] : IFM_CONFIG_ARCHIVE_ERROR_DETAILS: [Error in fetching VLAN file] : IFM_CONFIG_ARCHIVE_ERROR: [com.cisco.ifm.config.archive.service.exceptions.XDEFeatureExecutionException: No device package found for the specified device.]'
Maybe the Prime don't know where to find the vlan.dat on the 4500X-VSS ?
#dir cat4000_flash:
Directory of cat4000_flash:/
1 -rw- 2236 <no date> vlan.dat
sysObjectID (1.3.6.1.2.1.1.2) is
.iso.org.dod.internet.private.enterprises.cisco.ciscoProducts.cat4xxxVirtualSwitch
That is not the expected and supported value "4500X-16" above
Update: Error on fetching running and startup config as well:
[2014-12-09 20:24:21,818] [pool-37-thread-9] [service] [ERROR] - Thread Id : [10,013] : IFM_CONFIG_ARCHIVE_ERROR_DETAILS: [Error in fetching RUNNINGCONFIG file] : IFM_CONFIG_ARCHIVE_ERROR: [com.cisco.ifm.config.archive.service.exceptions.XDEFeatureExecutionException: No device package found for the specified device.]
[2014-12-09 20:25:31,882] [pool-37-thread-9] [service] [ERROR] - Thread Id : [10,013] : IFM_CONFIG_ARCHIVE_ERROR_DETAILS: [Error in fetching STARTUPCONFIG file] : IFM_CONFIG_ARCHIVE_ERROR: [com.cisco.ifm.config.archive.service.exceptions.XDEFeatureExecutionException: No device package found for the specified device.]

Similar Messages

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

Prime 1.3 and WLC 7.6 Can I push guest accounts?

Hi all
My Customer needs to update the WLC to 7.6 (from 7.4) due to 3700 APs, but does not use the ac or other new features (yet).
He has a Prime 1.3 update 4, where the guest Account are created.
Can he, after the WLC Upgrade to 7.6.130.0 still see the WLC from Prime 1.3 and Push guest accounts to the WLC?
The migration to PI 2.1 will be planned.
Thanks
Willem

Cisco Prime 1.3 doesn't support 7.6 please check the compatibility matrix
Table 4 Cisco Prime Infrastructure and Cisco Wireless Release Compatibility Matrix
Cisco Prime Infrastructure
Cisco WLC
Cisco MSE
ISE
Remarks
Update 4 for 1.3.0.20
Update 1 for 1.3.0.20
1.3.0.20
7.4.121.0
7.4.110.0
7.4.100.60
7.4.100.0
7.3.112.0
7.3.101.0
7.2.115.2
7.2.111.3
7.2.110.0
7.2.103.0
7.0.250.0
7.0.240.0
7.0.235.3
7.0.235.0
7.0.230.0
7.1.91.0
7.0.220.0
7.0.116.0
7.0.98.218
7.0.98.0
7.4.121.0
7.4.110.0
7.4.100.0
7.3.101.0
7.2.110.0
7.2.103.0
7.0.240.0
7.0.230.0
7.0.220.0
7.0.201.204
7.0.112.0
7.0.105.0
1.0
1.1
1.2

Prime Fulfillment 6 AND LMS 4.2 on single Solaris 10 server?

Is it possible to easily operate both Prime Fulfillment 6 AND LMS 4 on single Solaris 10 server?

They were not tested together, and I recommend they not be installed on the same zone instance (due to potential conflicts). Now, if you're certain you have a server that can accommodate both suites (in terms of resources), create separate zones for each suite. This will eliminate the conflict possibility while still giving you one overall physical machine to manage.

Prime 2.0 and IPS

Hi Guys
Can integrate my Ciso IPS to the Cisco Prime 2.0 and How....
thanks

Not in any meaningful way.
If you have a Cisco IPS appliance (or IPS module in an ASA), it can be managed either via IPS Device Manager (IDM), IPS Manager Express (IME) or Cisco Security Manager (CSM).
Newer ASA CX modules with IPS service are managed via PRSM.
Of course Cisco Sourcefire IPS sensors are managed via Defense Center.

Skype not connecting Moto G and Nexus 4 in ANDROI...

I have Moto G 2nd Gen and Nexus 4 device with latest Android 5.0.2. I donwloaded Skype on both devices yesterday and installed them. Then I opened two new skype accounts and tried making a call from one device to other. My wife was on the other device. Neither a normal call or a video call was going. Skype wasnt connecting at all. The phone from where I was making call was ringing but not the phone receiving call. Can somebody please help.
Regards
Ashok Kumar

Unfortunately the truth is prepaid support is not very well trained and was
not much help
My issue was solved ultimately not by prepaid support but upper level
support in NJ (or NY, not sure).
The problem was that my line was provisioned as having a 1X device (which I
never had). So even though we tried switching the device to an iPhone and
reprogramming it didn't matter. Any incoming MMS were simply discarded by
the system and all I would get were the silent SMS messages that ping my
phone to check the MMS server, but nothing was held to be retrieved.
If you are on VZW (pre or post paid) and having this problem, ask support
to check the "Mobile Type" and ensure its not set to 1X.
On Feb 25, 2014 5:25 AM, "Verizon Wireless Customer Support" <

WS-X6848-SFP module are supported with LMS Prime 4.1 and 4.2

Hi,
I would like to know if WS-X6848-SFP modules are supported with LMS Prime 4.1 and 4.2.
Thanks for your help,
SILVIA

It looks like they just added the WS-X6848-TX variant with the latest C6000IOS CiscoView package update (Version 37, dated 31 July 2012 - readme)
I'd expect the -SFP variant should be in the next update.
You should open a TAC case to make sure that it's brought to the attention of the dev team if they aren't already working on it. One of the tenets of Cisco Prime LMS is "Day 1 support" of new devices.

Adapter-fex Supported VICs and Nexus Switches

HI,
I am thinking of using C220M4 in standalone mode. I have been reading about adapter-fex and I am wondering which Cisco VIC supports adapter-fex and which Nexus Switch will support adapter-fex.
I am thinking of using a VIC1225 and Nexus 3000.
Thanks.

I believe that adaptor fex is supported only with Nexus 5k and N2k:
Network Adapter Virtualization Design (Adapter-FEX) with Cisco Nexus 5500 Switches and Cisco Nexus 2232 Fabric Extenders
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/guide_c07-690080.html
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/data_sheet_c78-657397.html

Prime Infrastructure 2.0 and Nexus 5548, SSH credentials fail

Hi,
I'm having problem getting the Prime Infrastructure 2.0 to login with SSH to a Nexus 5548 to do an inventory. I get "Wrong Telnet/SSH credentials". But when I use the same credentials from another SSH-client it works fine. I also tested to SSH from the console of the Prime-server and that also works fine.
Any ideas???
Regards,
Stefan Lindkvist

I have PI 2.0 working against Nexus 5k's in two different installations. See below for an example (click to enlarge).
Have you put in an entry in both the login and enable fields (even though they are not separately required when logging in directly)?

Issue with Prime Infra 2.1.1 and Nexus 7K

We have recently migrated from our NCS to Prime Infra 2.1.1. Since doing this we have started to import or switching gear into PI in addition to our WLC and MSE appliances. Discovery and inventory of the 3750X and 4500-X switches has been without issue. When we point PI 2.1.1 to a Nexus 7K running a VDC, the switch discovers as a Nexus 9500 instead of a 7K. Anyone else seen this happen? Any work arounds or suggestion on what might be going on? My thought was its discovering a VDC on the 7K and its not the admin VDC. That said our Admin VDC is not configured for SNMP and we wanted to discover the VDC's that we actually use for client traffic. I should note we have loaded the lastest available device pack to PI as well.
Please advise - any help would be greatly appreciated.
Thanks,
Jeff

We ran a discovery of all our Nexus switching last night. Once we did that the patter was easy to see. Any 9 or 10 slot Nexus was fine, any 4-slot Nexus appears as a Nexus 9500 instead of a 7K. I checked the compatibility matrix (latest release through DP 6.0) and support for the 9/10/18 slot is listed. No mention of support for the 4 slot. I believe that is our issue.
Jeff

Ask the Expert: Cisco Prime Infrastructure - Implementation and Deployment

Welcome to the Cisco Support Community Ask the Expert conversation.
This Ask The expert Session will cover questions spanning Cisco Prime Infrastructure on Implementation and Deployment on Wired and Wireless. This will be more specific to Customer’s and Partners questions product covering PI on configuration, Features and Menu, Network Monitoring, Maps, Implementation, High Availability and Maintenance and t/s parts.
Monday, February 2nd, 2015 to Friday, February 13th, 2015
Dhiresh Yadav is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco Prime Infrastructure and Cisco Wireless products. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS) and CCIE (DC) certifications.
Afroz Ahmad is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS),CCIE (DC), and SCJP (Sun Certified Java Professional )
Vinod Kumar Arya is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 8 years of industry experience working with large enterprise and service provider networks. He also holds VCP 5 and RHCE certifications.
** Remember to use the rating system to let the experts know you have received an adequate response.**
Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Network Infrastructure community, > Network Management, shortly after the event. This event lasts through February 13th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Hello Wilson,
Thanks for joining us.
1841 should just work fine for net flow . Hope you have a valid "PI Assurance license" installed on the server.
"PI Assurance license" is required for "net-flow" feature
Devices supporting Netflow in PI ::
1400, 1600, 1700 & 1800
2500, 2600 & 2800
3600, 3700, 3750 & 3800
4500 & 4700
AS5300 & 5800
7200, 7300, 7400 & 7500
Catalyst 4500 ASCI
Catalyst 5000, 6500, & 7600 ASCI
ESR 10000 ASCI
GSR 12000 ASCI
Cisco IOS Software Release Version
Supported Cisco Hardware Platforms
11.1CA, 11.1CC
Cisco 7200 and 7500 series, RSP 7200 series
12.0
Cisco 1720, 2600, 3600, 4500, 4700, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series
12.0T, 12.0S
Cisco 1720, 2600, 3600, 4500, 4700, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8600 series
12.0(3)T, 12.0(3)S
Cisco 1720, 2600, 3600, 4500, 4700, AS5300, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8650 series
12.0(4)T
Cisco 1400, 1600, 1720, 2500, 2600, 3600, 4500,
4700, AS5300, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8650 series
12.0(4)XE
Cisco 7100 series
12.0(6)S
Cisco 12000 series
NetFlow is also supported by these devices Cisco 800, 1700, 1800, 2800, 3800, 6500, 7300, 7600, 10000, CRS-1 and these Catalyst series switches: 45xx, 55xx, 6xxx.
NetFlow export is also supported on other Cisco switches when using a NetFlow Feature Card (NFFC) or NFFC II and the Route Switch Module (RSM), or Route Switch Feature Card (RSFC). However, check whether version 5 is supported, as most switches export version 7 by default.
You can check the below steps to diagnose the issue::
To verify that NetFlow is exported from a device to PI, follow the steps below:
1)   Browse to Administration > Data Sources page. Check the value in column ‘Last Active Time’ for the ‘Device Data Sources’ table. If the table is empty or the value does not represent recent time, then
it is possible that the device is not exporting NetFlow or PI Assurance license is not applied / expired.
2)   Login to PI console ( via SSH) as root user and run the command:
                netstat –an | grep 9991 – Output of this should be like : udp        0      0 :::9991         :::*
                Check the firewall settings on PI server using the command: firewall -L
1)   Check the configuration on an IOS / IOS –XE device. Run the commands
a)   sh running-config | inc destination
1)   This should list the IP address of the PI SERVER ( along with other outputs if any)
b)   sh running-config | inc 9991
1)   This should list at least one entry.
c)   If the above are fine, then verify that the flow monitor, flow exporter and the flow records are correctly configured on the device.
Refer to the URLs below to configure NetFlow export.
http://preview.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_monitor.html#wp1056427
Thanks-
Afroz
***Ratings Encourages Contributors ****

Cisco Prime Infrastructure not detecting Nexus VLANs

Hello,
we recently added 2 Nexus 5010 to our prime Infrastructure 2.0.
Once synchronization is completed, the device shows as Managed.
When looking through the device details, everything seems to be ok, just when looking into the VLANs tab, it says:
"none detected".
In fact, there are quite a lot of vlans on this device.
Did anyone have a similar problem?
Thanks,
Jörg

Hi Jorg,
I have checked and confirmed that Unfortunately this feature is not supported for NEXUS . I mean the VLAN information.
and I think "port-channels" are also not supported.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

3750 and Nexus 5548UP Support

I am working on a project that was handed down and several different engineers got their hands on. The project is (or should have been) a simple data storage/center. Fixing all the design problems has left me with very little time to research the security folks issues and I need help.
We are using Cisco Nexus 5548UP for our data center core and distribution/routing to encryptors connecting our remote sites which use Cisco 3750X series switches. The Nexus is running NOS 5.2(1)N1(4) and the 3750s use 12.2(55) IP base.
These are our particular issues:
1) For management and monitoring, what would be a good product to use to support this? If Cisco Prime Infrastructure, what ports would need to be allowed/opened through firewalls/ACLs (SNMP, syslog, etc)?
2) For switch login, the network security folks are reluctant to use TACACS and want to push for LDAP instead. Using Active Directory, is there any way to get the Cisco Nexus 5548UP and Cisco 3750Xs talking to Active Directory? I've found both 'yes' and 'no' answers online and am not sure. Do I need to use a different NOS and/or IOS? Are there specific directions somewhere? Or is it not possible?
3) Without TACACS, is there any way to implement command logging to a syslog server on the Nexus? On the 3750s, I make the following changes and all commands are relayed to our syslog server:
Enable
Configure terminal
Archive
Log config
Logging enable
Logging size 500
Hidekeys
Notify syslog
End
Is there anything similar for the Nexus?
4) In conjunction with #3, we need to be able to log each login attempt (success and failure) to a syslog server on the Nexus. On the 3750, using the "login on-[failure/success] log", it is can setup easy enough. On the Nexus, I haven't been able to find anything similar. I can't find any instructions on setting this up on the Nexus, though.
5) What IOS/NOS do we need to use to be able to lock out users after 3 failed logins (again, without using TACACS)?
If you need more information, please ask.
V/R,
Chris

The LRM is s special case transceiver which supports 10 Gbps over older FDDI grade multimode fiber when used with a mode conditioning patch cord. It is not supported on the Nexus 5548UP.
The SFP-10G-LR is used with single mode fiber for spans up to 10 km in length. It is supported on the 5548UP (and most every platform of Cisco's that takes SFPs).
Please see the product data sheet here.

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

Aaa New format configuation on IOS and Nexus-OS based devices ?

Dear all,
I have been working on an assignment to get our TACACs servers standardized and to change the old format aaa configs to the new standard before the old format gets deprecated.
I have many multiple IOS based model devices such as 2350, 2821, 3650, Firewalls, Nexus based 3048s 3064s and 7010s
However, I have tried the new format on both the IOS based 2350s and also on the Nexus based 3048s which has error on both cases
our plan is to move to the new style of aaa configuration and at least to have one standard format configuration for IOS based devices and one other standard format for Nexus based devices.
•Our tacacs appliances are crashing on AD authentication on a fairly regular basis. And I was wondering as to where to get resource on Cisco.com to see if we are on the latest version. Can you point me resource where I can find the latest version so that I will be able to compare it with what we have
Also if you have a forum recommendation for me to get help on this and other related staff that will be a huge help.
probably we might need to upgrade our IOS for example the below new aaa config format didn’t work? when I tried it on 2350 based on flash:/c2350-lanlite-mz.122-46.EY/c2350-lanlite-mz.122-46 version any suggestion here?
I have attached the sample config I have been trying to use-- If you have a better configuration suggestion let me know? Thanks a million for the help!
Abe
With Regards,
Abe

Yes, the focus with ML is certainly on trying to get people who have iOS devices to switch to using Apple computers.
For long-time devotees of OS X like us, there's not much in it. Snow Leopard was still a far more versatile and more widely compatible OS than either 10.7 or 10.8. If you're on 10.6.8. I would think twice about upgrading.
However, I think if you're on 10.7 already, it's worth upgrading to 10.8, simply because ML seems to be more stable and more refined. They have fixed some of the annoying things in Lion (like you can now put Devices back to the top of the Finder sidebar, Resume is turned off by default, 'Save As' has been resurrected, Launchpad actually has a filter bar etc etc.). Some of the apps are better too - some nice new features in Preview for editing and Safari has an all-in-one address/search bar).
More features are advertised explained here: http://www.apple.com/osx/whats-new/features.html

Prime 2.1 and Nexus netflow

Similar Messages

Maybe you are looking for