Prime calculator language keyword index

Where can I find a complete index to every keyword that is supported in the Prime programming language.
TI 84 plus manual had a very nice keyword index that included syntax in their manual. I'd love to see something similar.
I'm looking, for example, for a keyword like TIMER which tracks the number of seconds since midnight in some languages.
But I'm also wanting the full index so I can find things easier than trying the index to the online manuals, each of which I've downloaded and printed.
John

(1) On the calculator, press Toolbox, Catlg.  They're all there in alphabetical order.  When one is highlighted, press the Help key for information about that command or function.
(2) In the User Guide, the commands used in programs are found on pages 521 (near bottom) through 551 (near bottom).
(3) Although TICKS behaves differently on the physical calculator and on the emulator, it might be what you want to replace the TIMER command you're familiar with.  Or try HMS→(Time), and be sure to spell Time exactly like that (mixed case).  HMS→ is a function (in the Toolbox catalog) but Time is a system variable (press Vars, select the Home tab, highlight Time, and press Help).
The above assumes that you have firmware rev 6975 installed.  If not, be sure to upgrade ASAP.
Thank you, Joe,
(1) I had discovered Catlg, but had not thought to use the HELP key to get more information. Thanks.
(2) I must have a different version of the User Guide, 527-579 in my copy.  Edition 1, part number NW280-2001, copyright 2013. Thank you, though, because I had not found that section. Since I printed it, I probably won't bother printing it again. But when I'm at the computer, I could try search and find.
(3) Both of these can work. Probably will use TICKS since it returns an integer. Interesting that TICKS does not show up in the Catalog, nor does Time. 
Yes, 6975 is my current version. Took me awhile to remember how to see it. My biggest surprise so far is that I can calculate the exact value of 1000! in CAS mode. What I'd use it for? Not much.
Thanks for your help.

Similar Messages

  • Prime default language

    I have a new HP Prime calculator. When I press the Apps button, I get a "Choose default language" screen. I can't seem to choose anything in it, nor can I escape out of it. I can't get to the apps on my device. I can't even turn off the calcaulator.
    What's wrong?

    Hi,
    I suggest you post you question on the following forum:
    http://h30499.www3.hp.com/t5/Calculators/bd-p/bsc-408
    Regards.
    Note: I do not work for HP, I just like playing with calculators :-)

  • HP Prime calculating bug

    Hi, I'll get right to the issue i'm having with my HP Prime calculator.  Recently during an exam where i was calculating the moments of inertia of certain bodies i encountered what i can only describe as a bug in the software because I can't figure any other reason why it would kick out the answer it did for such a seemingly simple function.  After I had done all the laboreous work of simplifying the differential equations I just needed to add some simple fractions.  As i have been operating this calculator for several weeks now, the only way i can get it to show a fraction in exact form is to type (number) / (number) and it shows it in exact form.  In my case and for this particular calcuation I input (3/20) - (1/7) "enter".  the answer Prime gave me was noticably unsimplified given that i needed it in simplified form.  although the numerical, non-exact value was almost correct (.00714285714309 instead of the correct value of .00714285714286), generally Prime kicks out a simplified value.  What it gave me was 214500215/30030030099 instead of 1/140.  i'm just curious if i need to do something different to get a simplified/correct answer on the first go rather than having to do a work-around.
    Thanks in advance

    If you want an exact and simplified answer on the first go, do your calculation in CAS view rather than Home view. Try this experiment.
    1. Go to CAS view, and enter your calculation (3/20)-(1/7). The Prime will respond with 1/140, the exact answer. Now press the a b/c key. The Prime will respond with 0.00714285714286, the approximate decimal equivalent. Keep pressing the a b/c key, and the Prime will toggle between the two answers.
    2. Now try the same steps in Home view. The Prime will toggle between 0.007142857143 and 214500215/30030030099.
    Remember, the true decimal value for 1/140 is an infinite repeating number. Since every calculator can store only a finite number of digits, it must truncate the value after a set number of digits, and this introduces a small error. The big fraction you got in Home view is not wrong, and it's certainly not a bug. It's just that Home view is not designed to handle exact values. The CAS, on the other hand, is designed to handle exact values, so when you tell it to show an approximate answer, its decimal form will be closer to the exact value, namely, 1/140.
    The moral of the story is, use CAS view when you want exact values and Home view when you want approximate values. I tell my students to use fractions whenever possible (since those are usually exact) rather than converting them to decimal values. It's far easier to use 1/3 than 0.33333....[infinite number of 3s go here].

  • Prime calculator stuck in radians?

    Hi there, this is my first post on this forum site and hopefully I do all this correct. But my question is how do you switch between radians and degrees (as far as modes) on the HP Prime calculator? I thought it was touch the top right corner and then touch either of the symbols? I could have swore that was the way i did it before; but today when I went to switch to degrees the screen was unresponsive when that drop down menu would appear. So then from the CAS screen I went into settings and tried to change the mode there, and I could select between the two but when I would go back to the CAS screen and then back to the settings screen to see if it did indeed stay, the drop down bar would say radians again... I've tried the reset button on the back and no luck. Is there some setting that I might have turned on so it won't change between modes? I also haven't messed with the firmware at all; all I've done is take it out of the box and charge it up and use it. I've had it now since about last November and as far as I can remember this function used to work.
    Ok update if anyone reads this ... I have found that within the app "function" I can not switch between radians/degrees. I am just currious as to why im not able to do so if anyone would like to comment?
    Thanks, Nick
    This question was solved.
    View Solution.

    Here's one possible reason for what you were experiencing.  Each app can have its own private radian/degree setting in the "Symbolic Setup" screen.  (Shift Symb)  When an app has the angle mode set here, it usually cannot be changed elsewhere.  To restore your ability to set the angle mode in the usual three places (Home Settings, CAS Settings, and the battery icon popup box), press Shift Symb and change the angle setting there to "System".
    -Joe-

  • Keywords, Indexing, Networks

    Bridge CS4
    I appreciate any help and advice, I have searched and read up on many similar stories / problems.
    Our college shares a network drive filled with 6 years of photos. I am slowly going through and adding keywords, my workstation finds them fine, but other people's don't.
    So, in "find", I click the "search folders not indexed" and after maybe an hour it will start to pull what I've keyworded (one year out of the six have been tagged with meta-data).
    However, I found that when I searched for say "snow" and clicked the non-index folders, it found it, but if I went and searched for another different term, it would have to re-index. Maybe this was a user error, but shouldn't one index pass get all my keywords?
    In Conlcusion:
    a. Should I finish all the keywording and then share a cache file between the computers (is that possible)?
    b. When I'm done, should I just let the 4 other workstations index for a few hours but then whenever new folders of pictures are added, tell the users to browse that particular folder so their Bridge indexes it?
    c. Find another software for searching through large image banks over a shared network. Any recommendations?
    Thank you all,
    Matt

    This subject has be brought up several times,and I would like to help you with answers.  I am handicapped to offer advice that has worked in previous posts as the responders have failed to say how the problem was solved.  So I don't know if the offered solutions worked, they found other solutions, or they just gave up.
    When you do a find and have the box "search folders not indexed" checked I have found that it goes through all the folders again and indexes the files, even it you just did a search.  So uncheck the box unless you want to spend the time to re-index again.
    The following is advice I have gleamed from other threads on this subject, but no one has responded back with this works.  Personally, I have no knowledge about networked computers.
         The cache should be located on one computer and all others should reference that location.  With this setup changes to metadata will be seen by all        users.  If each user has their own cache location the data is not shared.
    If this is practical and works, or does not work,  some feedback would be appreciated.  That way others will benefit that read this thread in the future.
    Thanks

  • Bridge CS3: location of keyword index ???

    I know that Bridge stores the actual keyword(s) with the image files but where is the overall "index" located on my hard drive?
    The index is the structure that gives the instant access through the images.
    Thanks

    That doesn't sound right to me.
    My path wasn't quite correct it should have been
    C:\Documents and Settings\User name\Application Data\Adobe\Bridge CS3
    and the keywords are stored in
    Adobe Bridge Keywords.xml
    The cache files contain thumbnail data and these have to be rebuilt if image files are moved but the keywords stay with the image and are referenced by Bridge wherever the file is.
    That is my interpretation and I fully agree that the workings of Bridge are not properly documented by Adobe. But don't expect things to improve: the rushed time-scales imposed by the marketeers mean that not only are new releases buggy, but the documentation is inadequate or non-existent. People that want to understand the program have to spend hours sifting through the Knowledge Base (that's a misnomer!) and assorted blogs to find out what's going on.
    Welcome to the wonderful new world of user friendly Adobe.
    Har, Har!

  • Expression languages and indexed properties

    If I have an indexed property of a JavaBean(TM), can I access it via the expression language? For example,
    class MyBean
    public X getFoo(int n) { . . . }
    public void setFoo(int n, X x) { . . . }
    It seems logical that
    mybean.foo[0]
    should call myBean.getFoo(0)
    But the PRD2 spec (5.1.2.1, 5.1.2.2) seems to say no. Is that intentional?

    The EL in JSTL 1.0 and JSP 2.0 doesn't support indexed properties. What you can do instead (if you're the one developing the bean) is this:
      class MyBean {
        public X[] getFoos() { . . . }
        public void setFoo(int n, X x) { . . . }
      }Now you can access an element of "foos" with ${mybean.foos[0]}

  • Hp prime calculator Cannot Solve simple equation

    Hello,
    I'm trying to solve
     solve( (2)^x = (x)^2,x)
    But the calculator cannot solve or am I doing somthing wrong?.
    I lost my TI Nspire CX and I though that HP Prime, since is a recent modern version, were able to solve something simple as that, I am wrong. (TI Nspire solved it ).
    How solve the above equation using the HP Prime? I'm seriusly thinking to return this back.
    Thank you
    This question was solved.
    View Solution.

    Oops!  Quite right.  In general, all symbolic math work should be done in the CAS; that's what it's for.  Home is intended for ordinary number-crunching, not symbolic math.  Sorry for not pointing that out.
    -Joe-

  • Language specific index

    Hi,
    I'm working for one of the fuzzy search requirment, I have to join three tables which are contains serach data with varchar2 datatype, but there is no relationship between that three tables hence i need to join some other tables which is having relationship between the above three tables and also the search will involve in english ,german and chinise language, can you please guide me how to achive this requirment?

    You can search the online documentation and this Text forum for many examples of the following:
    user_datastore - to use a procedure to join the columns you want to search
    lexer types - select one of the lexers for multiple languages
    fuzzy - for enabling fuzzy searches and syntax for fuzzy searches

  • HP Prime Calculator resetting itself.

    As the title suggests, I have an HP Prime that keeps resetting itself when I press the 'num' button. It doesn't reset when I push 'shift' 'num' though. I don't know if I messed something up somehow becuase this button use to work fine. Any help would be great.
    Thank you in advance,
    Nick
    This question was solved.
    View Solution.

    Sorry about the trouble you're having updating your Prime's firmware.  The process seems to be finicky about which USB port it likes and which USB ports it doesn't like.  It prefers ports on the computer over those on a hub, and prefers the computer ports which are the closest to the motherboard.  Usually.  But it's finicky and impossible to predict.  If paperclip-resetting your Prime and trying to update through a different USB port doesn't work, then perform the following emergency procedure:
    1. Make sure your Prime is in "recovery mode".  If the Connectivity Kit left it in recovery mode, you're ready for step 2.  Otherwise, force your Prime into recovery mode by pressing and holding down the Symb key, then poking a paperclip into the reset hole in the back, then releasing the Symb key.
    2. Make sure that the Connectivity Kit is not running, and make sure that the Prime is connected to the computer with the USB cable.  Best results are obtained by using the USB port closest to your motherboard.
    3. On your PC, navigate to the installation folder of the Connectivity Kit.  It's different on different computers, but on mine it's here:
    C:\Program Files\Hewlett-Packard\HP Connectivity Kit
    In that folder, you'll see a program called "Updater.exe".  Run that program directly by double-clicking it.  This should perform the update directly, bypassing the finicky Connectivity Kit.
    Hope this works!  It has always worked when the Connectivity Kit was scorning me.
    -Joe-

  • HP PRime Calculator - RPN active - 'Get Home' in CAS do not work

     Firmware version : 20150617 v8151 If I have RPN active in home view, when in CAS I press Menu->Get Home, the list of values that are shown are of the Textbook setting.The virtual calculator has the same problem. RPN Screen:   CAS Screen:  

    Hi,
    I would suggest you try:
    http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/forum.cgi
    there is some discussion there about about starting a bug reporting forum. A feature request section would be a useful part of that too.
    You can also try the comp.sys.hp48 newsgroup. The GoogleGroups link:
    https://groups.google.com/forum/#!forum/comp.sys.hp48
    Regards.
    Note: I do not work for HP, I just like playing with calculators :-)

  • Prime calculator - Bugs

    I have discovered several bugs in the latest firmware. They are:
    If you chose "Digit Grouping" containing spaces or other signs, the solver stops working for larger numbers than 999...
    It is no longer possible to plot more than one function. If I check two or more, the plot funtion reply "no function checked"...
    /Hans

    Hi,
    These problems have been reported here:
    http://www.hpmuseum.org/forum/thread-1443.html
    http://www.hpmuseum.org/forum/thread-1705.html
    http://www.hpmuseum.org/forum/thread-1565.html
    Regards.
    Note: I do not work for HP, I just like playing with calculators :-)

  • Keywords and indexing assets

    We were hoping to use Bridge to help us search through courseware and supporting files by keywords inbedded in the files. Example we have a notice from our custome that they want all our courses that include the "BLUEFROG" to now be changed to "GREEN FROG".  We'd like to go through our library of PowerPoint, Acrobat docs, Captivate files and SWFs to look for the Blue frog key word so we could find the courses that needed updates. So far we haven't had any luck but then none of us are Bridge experts.
    Thank you,
    Susan

    Are you talking about metadata or words within the content of the files? F.e. the word bluefrog within the text of a PDF?
    PDF does, SWF and Captiva files might support keyword indexing and metadata adding (or viewing them when exist) in Bridge. But Powerpoint and lots of other Office files does not. You can add properties to a powerpoint file and here something which is called "keyword" (which is more or less like a Windows attribute/tag), but those won't show up as IPTC keywords in bridge.
    You might be more successful with a real DAM, like f.e. Cumulus - of course it must support not only IPTC but also those Windows tags.

  • Prime Graphing Calculator Identifica​tion of Older Prime Hardware Version A

    Hello,
    I have been trying to update the firmware version to the latest version (2014 07 02 (6031)) on my Prime Graphing Calculator without luck, the release_info.txt file indicates that (for firmware version 2014 03 31 (6030)):
    There is limited backward compatibility between this and earlier releases.
    Older Prime hardware (Revision A) does support this release, however the wireless, unit-to-unit, and data streamer functionality is not supported on earlier models. In the Help->About HP Prime screen the hardware revision will be displayed along with software version information.
    How can I tell if my calculator hardware number is the Revision A hardware?
    Is the CAS version the hardware number?
    Thank you very much,
    H.
    This question was solved.
    View Solution.

    Hi,
    All HP Primes are upgradeable to version 6030 (note that 6031 is for the PC emulator only). It is just that Hardware A has a problem with some communications.
    Firmware versions prior to 6030 (i.e. 5447 and older) do not show the hardware version in the 'about' screen.
    When you upgrade to 6030 the hardware version will be displayed in the 'about' screen.
    You can also determine the hardware version from the model number (found on the back of the box it came in, near the bar code):
    NW280AA is Revision A hardware
    G8X92AA is Revision C hardware
    By the way, the following process is recommended for upgrading the Prime:
    Install the Connectivity Kit from the CD.
    Once the connectivity kit is installed, update the calculator.
    The following method is recommended:
    Connect your HP Prime calculator via the supplied USB cable (directly connected, do not use a USB hub)
    Start the HP Connectivity Kit 
    Click the Calculator tab 
    Right-click the name of the HP Prime you wish to update (it would be the one you connected before starting this procedure) 
    Make a note of the version number and then click the OK button 
    Click on the Help Menu and select Check for update 
    Check for update pop-up box, check version number that it is newer than the one you wish to update. 
    Then click download button 
    That's it, you'll see on the screen of your calculator the update being loaded and installed. Don't click too fast to get out of the HP Connectivity Kit, wait a minute or so after completion. 
    Also, there is a step in the Connectivity Kit where it is advised to back-up the version you had before you run the procedure, just in case. That way you have a way to re-cover.
    Regards.
    Note: I do not work for HP, I just like playing with calculators :-)

  • Searching for Primes under One Million - A doubt in the JavaFX samples

    http://javafx.com/samples/PrimeFactors/index.html
    In this example, i found the number of primes calculated in JavaFX Script + Java w/ Threads section is different ( 1 count lesser) than the other ones. Is there any change in the logic for this part of the code? If my understanding is wrong, pls correct me.
    Thanks.

    Thamizharasu wrote:
    Hi All,
    Again i tried the same with javascript,..

Maybe you are looking for