Prime DCNM 6.1(2) - LAN client not working

Hello Everyone,
I've recently installed a Prime DCNM 6.1(2) to a Windows 2008 R2 SP1 64 bit version. It seems to be working fine, apart from the DCNM-LAN client.
If I login with the Java client, I got the GUI, however it remains blank - I can see the menu, but no data at all. It seems it cannot cummunicate with the DCNM server. DCNM-SAN client, the WEB client and the Device manager works fine, but I just cannot make this work.
Tested it from Win2k3 SP2, Windows 7, and the server itself, with Java 1.6.31, 1.6.37, 1.7.13.
Tried to install DCNM on our LAB as well, but I've experienced the same.
Any hints appreciated!
Kind regards,
Gabor

Hi All,
      I also have met this issue! However, I want to know whether the deep discovery must need SNMPV3 or not. My client just gave me the N7K username and password, I used the information to discovery the N7K successfully and the dcnm-lan client still can't display anything.
     DCNM version is 6.1(2) and window platform is win 2008 R2 standard 64 bit
    Thx in advance!
     After setting the SNMPv3, we still find nothing in the dcnm-lan client as given below:
Regards,
Tira
消息编辑者为：tira li

Similar Messages

DCNM LAN JAVA Client Not working

Hi ,
Recently i installed the DCNM server , we are using nexus 7k in dc environment . I purchased the DCNM server license and assigned it to switches thourgh web dcnm client . Login in Java DCNM LAN is not working , It says check your username/password . Only with SAN its working Fine , Authetication to the dcnm is configured to check the TACACS server . Can you help on this.
Thanks , Vedagiri Gopinath

Duplicate posts. :P
Go here: http://supportforums.cisco.com/discussion/12164196/dcnm-lan-java-client-not-working

T61 Intel Pro 1000 Lan Adpater not working

Hello, I have a T61 7664-17U. I recently had to replace the hard drive on this system due to drive read errors.
I have all of my system up to date and working, except the lan adapter. I have the 82566MM Gigabit connection in the network connections but there is no communication when i connect the rj45 cable. I would like to get this working as my office does not
have a wireless connection and i need to use the system there. Could anyone please guide me to the correct driver and how to install it so i get things finished up and working. Any suggestions would be appreciated.

check BIOS / configuration and see if INTERNAL LAN is enbaled or disabled. i had this happen when my wireless and lan were not working. fixed it in bios.
T7600, T60p - 2GB - 2.33GHZ - 100GB

Usb driver on the left side near the lan are not working

The brightness keys are also not working and the usb drives on the left near the lan are not working.

Hi:
Did you reinstall the operating system?
If so, you are probably missing the graphics and USB3 drivers.
Graphics:
File name: sp56458.exe
USB3: Download and install both of these drivers and reboot.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...
If there is a device labeled SMBus Controller in the device manager, this driver should work for that device.
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_119081_1

Client not working after upgrade

Hi,
I am upgrading my SAP 8.8 SP:00 Pl 10 to PL 16. with the help of upgrade wizard all the SAP items are upgraded from PL 10 to Pl 16.
When i was login in through SAP client it asked for upgrade i clicked yes after some time the upgrade stop and the SAP client logo on the server disappear. Now i am not able to login since there is no client to login.
I tried to install client from set up file but it gives following error
Error Number: 0x80040702
Description: Failed to load Dll: creator Dll
I have refered SAP Note: 1408662 and also refered other thread but its not working
I tried to uninstall client from add/ remove program but i am not able to do so
Pls provide solution since i am not able to login.

Hi,
I have already installed the recommended c++ version as per SAP note, still it is not working. I tried to uninstall the client from
B1SHR folder but it gives me error.
The server is properly upgraded and problem exists on 3 of client machines.
I have to any how remove this client file or make it working to acces SAP else i wil have to format system which i dont want to do.

Oracle 10g Client not working from Vista Business

Hi,
I have installed Oracle 10g Rel2 DB on my desktop (OS Vista Ultimate X64 bit) and try to connect from my new laptop (OS Vista business) after installing the client software which does not work, whereas I am able to connect to same database from my other laptop using Windows XP. The tnsnames.ora files on both laptops have the same contents. Moreover, the SQL Plus is also not working on the vista laptop, I mean when I try to login the window closes down itself it doesn't stay open even to give any error message. . . Any ideas would be a great help . . .thx

Did you install the Vista specific Oracle client?
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html

[T400] Cisco VPN client not working over wireless adapter (but works on cabled connection)

I have a very strange problem.
I need to connect to my work via the cisco vpn client (version 5.0.00.0340).
My previous laptop (T43 , windows XP) worked well through both wired / wireless connections. My desktop machine (vista) works via wired connection (it has no wireless connection).
On my new T400, the VPN client works via a wired connection but not via the wireless adapter.
On the wireless apapter, the vpn seems to connect OK, but when I try to access resources via the VPN there is little response.
I get this in the vpn log...
405 08:56:57.073 04/16/09 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xa4510009 (IPSecDrvCB:846)
I've tried disabling the firewall (in both the T400 and the router), removed access connections, and disabling tcp v6. I've rebooted everything too.
But, nothing seems to work. I suspect the problem is on the t400 somewhere, because the old laptop used to work OK via wireless.
I've seen some google links on cisco vpn not working via wireless but nothing seems to apply to my exact situation yet.
Anyone else had this problem or know of a fix? Thanks in advance.
Solved!
Go to Solution.

all good now, got it working.
The Deterministic network thing was not installed on the wireless adapter for some reason.
So, I installed the latest wireless driver, reinstalled the vpn and all is good now.

Driver to email client not working

For my class we are attempting to write our own email client. Our professor gave us the following driver. However when I attempt to compile the driver I get these errors:
MailClient.java:125: cannot find symbol
symbol : variable envelope
location: class MailClient.SendListener
               SMTPConnection connection = new SMTPConnection(envelope);
                                                              ^
MailClient.java:126: cannot find symbol
symbol : variable envelope
location: class MailClient.SendListener
               connection.send(envelope);Admittedly it could be something with the SMPTConnection code, as that is what we had to write. However I would have expected it to throw some sort of exception in there and it does not. Any help to figure out why the driver is not working would be appreciatted.
Code:
import java.io.*;
   import java.net.*;
   import java.awt.*;
   import java.awt.event.*;
/* $Id: MailClient.java,v 1.7 1999/07/22 12:07:30 kangasha Exp $ */
* A simple mail client with a GUI for sending mail.
* @author Jussi Kangasharju
    public class MailClient extends Frame {
    /* The stuff for the GUI. */
      private Button btSend = new Button("Send");
      private Button btClear = new Button("Clear");
      private Button btQuit = new Button("Quit");
      private Label serverLabel = new Label("Local mailserver:");
      private TextField serverField = new TextField("", 40);
      private Label fromLabel = new Label("From:");
      private TextField fromField = new TextField("", 40);
      private Label toLabel = new Label("To:");
      private TextField toField = new TextField("", 40);
      private Label subjectLabel = new Label("Subject:");
      private TextField subjectField = new TextField("", 40);
      private Label messageLabel = new Label("Message:");
      private TextArea messageText = new TextArea(10, 40);
     * Create a new MailClient window with fields for entering all
     * the relevant information (From, To, Subject, and message).
       public MailClient() {
         super("Java Mailclient");
      /* Create panels for holding the fields. To make it look nice,
      create an extra panel for holding all the child panels. */
         Panel serverPanel = new Panel(new BorderLayout());
         Panel fromPanel = new Panel(new BorderLayout());
         Panel toPanel = new Panel(new BorderLayout());
         Panel subjectPanel = new Panel(new BorderLayout());
         Panel messagePanel = new Panel(new BorderLayout());
         serverPanel.add(serverLabel, BorderLayout.WEST);
         serverPanel.add(serverField, BorderLayout.CENTER);
         fromPanel.add(fromLabel, BorderLayout.WEST);
         fromPanel.add(fromField, BorderLayout.CENTER);
         toPanel.add(toLabel, BorderLayout.WEST);
         toPanel.add(toField, BorderLayout.CENTER);
         subjectPanel.add(subjectLabel, BorderLayout.WEST);
         subjectPanel.add(subjectField, BorderLayout.CENTER);
         messagePanel.add(messageLabel, BorderLayout.NORTH);
         messagePanel.add(messageText, BorderLayout.CENTER);
         Panel fieldPanel = new Panel(new GridLayout(0, 1));
         fieldPanel.add(serverPanel);
         fieldPanel.add(fromPanel);
         fieldPanel.add(toPanel);
         fieldPanel.add(subjectPanel);
      /* Create a panel for the buttons and add listeners to the
      buttons. */
         Panel buttonPanel = new Panel(new GridLayout(1, 0));
         btSend.addActionListener(new SendListener());
         btClear.addActionListener(new ClearListener());
         btQuit.addActionListener(new QuitListener());
         buttonPanel.add(btSend);
         buttonPanel.add(btClear);
         buttonPanel.add(btQuit);
      /* Add, pack, and show. */
         add(fieldPanel, BorderLayout.NORTH);
         add(messagePanel, BorderLayout.CENTER);
         add(buttonPanel, BorderLayout.SOUTH);
         pack();
         show();
       static public void main(String argv[]) {
         new MailClient();
    /* Handler for the Send-button. */
       class SendListener implements ActionListener {
          public void actionPerformed(ActionEvent event) {
            System.out.println("Sending mail");
         /* Check that we have the local mailserver */
            if ((serverField.getText()).equals("")) {
               System.out.println("Need name of local mailserver!");
               return;
         /* Check that we have the sender and recipient. */
            if((fromField.getText()).equals("")) {
               System.out.println("Need sender!");
               return;
            if((toField.getText()).equals("")) {
               System.out.println("Need recipient!");
               return;
         /* Create the message */
            Message mailMessage = new Message(fromField.getText(),
                     toField.getText(),
                     subjectField.getText(),
                     messageText.getText());
         /* Check that the message is valid, i.e., sender and
          recipient addresses look ok. */
            if(!mailMessage.isValid()) {
               return;
         /* Create the envelope, open the connection and try to send
          the message. */
            try {
               Envelope envelope = new Envelope(mailMessage, serverField.getText());
                catch (UnknownHostException e) {
               /* If there is an error, do not go further */
                  return;
            try {
               SMTPConnection connection = new SMTPConnection(envelope);
               connection.send(envelope);
               connection.close();
                catch (IOException error) {
                  System.out.println("Sending failed: " + error);
                  return;
            System.out.println("Mail sent succesfully!");
    /* Clear the fields on the GUI. */
       class ClearListener implements ActionListener {
          public void actionPerformed(ActionEvent e) {
            System.out.println("Clearing fields");
            fromField.setText("");
            toField.setText("");
            subjectField.setText("");
            messageText.setText("");
    /* Quit. */
       class QuitListener implements ActionListener {
          public void actionPerformed(ActionEvent e) {
            System.exit(0);
   }

This is what I mean:
/* Create the envelope, open the connection and try to send the message. */
           Envelope envelope = null;
            try {
                 envelope = new Envelope(mailMessage, serverField.getText());
                catch (UnknownHostException e) {
               /* If there is an error, do not go further */
                  return;
            try {
               SMTPConnection connection = new SMTPConnection(envelope);
               connection.send(envelope);
               connection.close();
                catch (IOException error) {
                  System.out.println("Sending failed: " + error);
                  return;
            System.out.println("Mail sent succesfully!");

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

Cisco Prime Infrastructure 1.2 OVA - URL/FTP not working

The ESXi install of the theNCS OVA was successful. NCS seems to load and activate interfaces. The console session is working. Using compliant browsers; https://<ip address> does not work. When I stop "ncs" or halt the vm the web page responds shortly but then the connection is lost. I used "show ports" and tried https://<ip address>/8082 and get a login from the Cisco Prime Infrastructure Health Monitor URL. There is a prompt for the authorization key. How can I confirm the installation is complte and all services are up and running
Thanks
Terry

After digging almost 1 month, I found the answer.
When you do provision from ESXi with ova file, you have to create "Thick Provision" otherwise, you wiil have same problem such as "some services are not up"
In my case, I am running ESXi on the top of VM WorkStation since I don't have any ESXi server. When I added 250GB into the WorkStation and did provision with "Thick" it works !!!
Since my testing envrionment is little complicated (ESXi with VM WorkStation), I added first 250GB HDD into ESXi, and tried. It didn't work. So I added 250GB into VM WorkStation and did provision through Workstation, it worked (If you don't understand this statements, do not worry. If you have ESXi server, you don't need to worry about)
As far as cisco ova is concerned, when I talked to one of my my friend who was working for new ACS (Virtual Appliance) he had same issue. He also solved with "Thick Provision"
FYI, even if when I installed with "Thin Provision", PI 1.2 used only 10GB out of 200GB, so I did not think that I should use "Think Provision". But definitely not.

Verizon email; Thunderbird client; Not working since 3/25/2013;server name change

Yesterday, 3/25/2013, I noticed that email wasn't working from my thunderbird client. After a day of assuming that the problem existed elsewhere, I found on this site where it says to use POP.VERIZON.NET, port 995, and SMTP.VERIZON.NET, port 465. After grumbling why didn't I hear about this name change?, I changed them. At that time I noticed that the PORTS were wrong, too. They'd been right, and now, not. Most confusing. I changed them. Each account has CONNECTION SECURITY SSL/TLS and NORMAL PASSWORD.
But: when I try to connect, I get: An error occurred during a connection to pop.verizon.net:995. You have received an invalid certificate.....Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate...."
I am at a loss. What's wrong, other than that email seems to be choking on security?
Solved!
Go to Solution.

Found in another post where a person said the INCOMING.VERIZON.NET and OUTGOING.VERIZON.NET did still work, so I tried it, but still got that Certificate error. Found someone else who said they had to say 'no connection security' before it would work, and so I tried that -- and it did.
Not thrilled about this, but the client is working again.

HT2452 I updated my iMac and the Wifi & LAN are not working

I updated my iMac and the Wifi & LAN are not working

Firefox stores site favicons to display next to the corresponding bookmark. If those have disappeared ''completely'', it might indicate a problem with your bookmarks list. If some of the site favicons still show, it could be this: for bookmarks without favicons, Firefox recently changed from showing a "blank page" icon to showing the dotted rectangle icon.

ArenaNets GW2 Mac Client Not Working

I have installed the new ArenaNet Guild Wars 2 client.
Game all downloaded and installed but it does not work.
I click login - all good.
I click Play - black screen with hand pointer
It then drops back to desktop
It did run once last night and thats it, before that once nothing, after that once nothing.
It runs on this spec Mac people are saying - ATI Radeon HD4870 512 MB 2008 MacPro 6GB Mem
It will not run on my machine.
MacPro 2009 ATI Radeon HD4870 6GB 10.6.8 2.66 GHz Quad Core-Intel
People are reporting that it will and does work on my above spec machine.
The specs that ArenaNet give are just what they want to support not what it will actually work on.
I know the games good on my machine as it runs under WIneskin but not as good the new Mac client.
Any help/ideas would be good.

You're right ntotheappledotcom! I upgraded to Lion and characters like '-', '*', '!', '.' are working now, however, '/' and '@' still don't work. Less to worry about
Next feature should be writable ftp mountpoints in Finder... Please!

WIRLESS LAN IS NOT WORKING IN IT.

HI I AM USING WINDOWS 8 WIRLESS LAN(DRIVER) IS NOT WORKING(INSTALLING) IN IT CAN U PLEASE RESOLVE MY PROBLEM

sunny_22j wrote:
i have purchased iphone 5s from dudai and it doesnt have face time,
And it never will. Phones sold in Dubai do not have facetime installed per government regulations.

Lion as Kerberized NFS4 client not working

Greetings,
I have Lion 10.7.3 as a new install, trying to get kerberized NFS4 working. "kinit someuser" works and I get a valid ticket, so communicating with the KDC ok. Note kerberized NFS4 is working well on a bunch of linux clients, I do have the "insecure" option set on the NFS server. Firewalls all off for testing. Keytab containing host and nfs successfully transfered to the mac with correct kvno.
sudo mount -v -t nfs -o sec=krb5,vers=4 NFS_Server_Ip:/Dir_to_be_exported /Users/some_user/mountpoint
results in:
"mount_nfs: can't mount /Dir_to_be_exported onto /Users/some_user/mountpoint: Permission denied
and in /var/log/kernel.log
"nfs_gss_clnt_gssd_upcall: gssd port not valid
nfs4_setclientid failed, 13"
Permisions all ok as far as I can see and as I said, this is working fine on several Linux clients. The KDC is Linux MIT.
I've been doing some research and these kernel log messages were questioned in quite a few 2008 threads, with no apparent successful resolution - I hope it's not the same bug!
All suggestions gratefully accepted,
BRgds/Alan

For the benefit of others:
Apple Support have confirmed that Kerberized NFS4 does not work under Mac OSX. (and I suspect it never has). I'll restrain myself from further comment ...
Rgds/Alan

Prime DCNM 6.1(2) - LAN client not working

Similar Messages

Maybe you are looking for