Prime Infrastructure 1.3 ERROR at Backup restore

Hi everyone,
we are currently in migration phase of WCS to Prime 1.3 and at this moment we are encounter the following error:
We are migrating the databases at appliance 1, then backup the databases and restore it at appliance 2.
This process is needed for the central migration of 3 4 databases.
Today we wanted to restore a migrated database on the new appliance and got this error message:
ERROR : There is the mismatch in the following configuration parameter(s) of this machine when compared to the machine where the backup was generated: SWAP Memory
ERROR : This may affect the performance of the current machine. Hence aborting restore process.
% Application restore failed
Both appliances have the same version when the database was backed up, appliance 2 has already the final licenses while appliance 1 run without licenses at the moment (for the migration process).
Can anyone help me regarding this error message? I couldn't find anything in the net.
Best Regards

Today we could figure out that the update 1 for Prime Infrastructure was blocking the restore process.
You can't remove the patch. When you try the command "patch remove NCS..." you get an error that this command does not apply on this patch version...
We installed a fresh version 1.3.0.20 without patch and could restore the database without problems.
So be careful with this update...

Similar Messages

  • Cisco Prime Infrastructure 1.2 Error

    Hi,
    I don't have any experience with Cisco Prime infrastructure. I am getting the below error
    Unable to start secondary NCS server PRLPrimeNCS02   [10.140.xx.xx]
    Reason: IO Error: could not resolve the connect identifier   "wcss1"
    Not sure exactly what the error means. Any help much appreciated.
    Thanks
    Nachi

    Hi Scott,
    Thank you for your email.
    The HA is runing on the Cisco Prime. Runing Cisco Prime on a Virtual machine in VM.
    The issue we are experiencing is that the system failed over to the secondary (HA) for unknown reasons. When we failed it back it didn’t fail back properly. Configured Manual failover. Managed to failback to primary but it complained HA was no longer configured.
    Tried to remove HA and reconfigure it. The primary removed the HA configuration, but the secondary kept it. Here is some info on the secondary
    PRLPrimeNCS02/admin# ncs ha status
    [Server] prlprimencs01(10.xx.xx.xxx) [State] Secondary Lost Primary [Failover Type] manual
    PRLPrimeNCS02/admin# ncs ha remove
    High availability configuration will be removed
    Do you wish to continue? (y/N)  y
    Removing secondary configuration will remove all database information
    Do you wish to remove high availability configuration from primary? (y/N)  y
    Secondary is attempting to remove high availability configuration from both primary and secondary
    Requesting primary to remove high availability configuration from both primary and secondary
    Successfully removed high availability configuration
    PRLPrimeNCS02/admin#
    PRLPrimeNCS02/admin#
    PRLPrimeNCS02/admin# ncs ha status
    [Server] prlprimencs01(10.xx.xx.xxx) [State] Secondary Lost Primary [Failover Type] manual
    PRLPrimeNCS02/admin#
    And the primary
    prlprimencs01/admin# ncs ha status
    [State] Stand Alone
    prlprimencs01/admin#
    Below is the log
    Starting Health Monitor as a secondary
    Checking for Port 8082 availability... OK
    truststore used is /opt/CSCOlumos/conf/truststore
    truststore used is /opt/CSCOlumos/conf/truststore
    Starting Health Montior Web Server...
    Health Monitor Web Server Started.
    Starting Health Monitor Server...
    Health Monitor Server Started.
    java.lang.OutOfMemoryError: Java heap space
    Dumping heap to logs/java_pid6044.hprof ...
    Heap dump file created [249907589 bytes in 6.857 secs]
    Thanks
    Nachi

  • Cisco Prime Infrastructure 2.2 Error

    We have just loaded a new OVA for Cisco Prime Infrastructure 2.2 and are receiving an error on every pre-built and custom template of:
    Template Deployment- Prepare and schedule : Configure SNMP
    There was an error while parsing and rendering the content. (updateLeftTreeOnce is not defined)
    Does anyone know how to fix?

    I found local root user dosn't get this error, only tacacs with root rights get the error.

  • Cisco Prime Infrastructure 2.1 error-disable alert

    We have a cisco PI 2.1 managing switches and a lot of switchports have BPDUGuard enabled. When occur error-disable , request send email notification to administrator .
    By default, when a port of a switch goes down, the Prime generates alarm for that. (this is a problem, because every laptop disconnection will generate alarm for administrator)
    Can i change the alert just for error-disable and how to ?
    Thanks

    Causes of Errdisable
    This feature was first implemented to handle special collision situations in which the switch detected excessive or late collisions on a port. Excessive collisions occur when a frame is dropped because the switch encounters 16 collisions in a row. Late collisions occur after every device on the wire should have recognized that the wire was in use. Possible causes of these types of errors include:
    A cable that is out of specification (either too long, the wrong type, or defective)
    A bad network interface card (NIC) card (with physical problems or driver problems)
    A port duplex misconfiguration
    A port duplex misconfiguration is a common cause of the errors because of failures to negotiate the speed and duplex properly between two directly connected devices (for example, a NIC that connects to a switch). Only half-duplex connections should ever have collisions in a LAN. Because of the carrier sense multiple access (CSMA) nature of Ethernet, collisions are normal for half duplex, as long as the collisions do not exceed a small percentage of traffic.
    There are various reasons for the interface to go into errdisable. The reason can be:
    Duplex mismatch
    Port channel misconfiguration
    BPDU guard violation
    UniDirectional Link Detection (UDLD) condition
    Late-collision detection
    Link-flap detection
    Security violation
    Port Aggregation Protocol (PAgP) flap
    Layer 2 Tunneling Protocol (L2TP) guard
    DHCP snooping rate-limit
    Incorrect GBIC / Small Form-Factor Pluggable (SFP) module or cable
    Address Resolution Protocol (ARP) inspection
    Inline power
    Note: Error-disable detection is enabled for all of these reasons by default. In order to disable error-disable detection, use the no errdisable detect cause command. The show errdisable detect command displays the error-disable detection status.

  • Cisco Prime infrastructure template undeploy

    Hi,
    I am new to cisco prime, I have create the new Trap receiver template and deployed to one of the wireless controller and saved the deployment
    Now I want to undeploy the templates, When I tried undeploying the templates for same wireless controller, I got the warning message stating "Failed to undeploy the template"
    Please advice on below points
    1. How to undeploy the templates in cisco prime infrastructure
    2. Where to find the snmp traps ( steps to check the snmp traps) in cisco prime.
    Please Help!!!!!

    Using System Logs
    Prime Infrastructure logs all error, informational, and trace messages generated by all devices that are managed by Prime Infrastructure.
    Prime Infrastructure also logs all SNMP messages and Syslogs it receives.
    You can download and email the logs to use for troubleshooting Prime Infrastructure.
    Step 1 Choose Administration > Logging. The General Logging Options Screen appears.
    Step 2 Choose a Message Level.
    Step 3 Check the check boxes within the Enable Log Module option to enable various administration modules. Check the Log Modules option to select all modules.
    Step 4 In the Log File Settings portion, enter the following settings. These settings will be effective after restarting Prime Infrastructure.
    Note The log file prefix can include the characters "%g" to sequentially number of files.
    Step 5 Click the Download button to download the log file to your local machine.
    Note The logs.zip filename includes a prefix with the host name, date, and time so that you can easily identify the stored log file. Included in the zip file is an html file that documents the log files.
    Step 6 Enter the Email ID or Email IDs separated by commas to send the log file.
    Note To send the log file in a mail you must have Email Server Configured.
    Step 7 Click Submit.

  • Cisco Prime Infrastructure 1.3 Template Application Logs

    So I'm pushing out a config template to my APs via CPI1.3 (Configure, Lightweight AP Configuration Templates; select template; select my APs, Apply).
    I get a "Partial Success" to a few of my APs. When I hit "Details" for these partial successes I get precious little details.
    So I go to check the server/appliance log (Administration, Logging, Download Log File). The log "file" is an archive of all logs on the appliance. All are in one folder of the archive, and the names are less than enlightening. Checking the most promising filenames does not seem to contain anything relevant to the push task.
    So, which log file do I look into for actual details of the results of an AP configuration template push?

    Using System Logs
    Prime Infrastructure logs all error, informational, and trace messages generated by all devices that are managed by Prime Infrastructure.
    Prime Infrastructure also logs all SNMP messages and Syslogs it receives.
    You can download and email the logs to use for troubleshooting Prime Infrastructure.
    Step 1 Choose Administration > Logging. The General Logging Options Screen appears.
    Step 2 Choose a Message Level.
    Step 3 Check the check boxes within the Enable Log Module option to enable various administration modules. Check the Log Modules option to select all modules.
    Step 4 In the Log File Settings portion, enter the following settings. These settings will be effective after restarting Prime Infrastructure.
    Note The log file prefix can include the characters "%g" to sequentially number of files.
    Step 5 Click the Download button to download the log file to your local machine.
    Note The logs.zip filename includes a prefix with the host name, date, and time so that you can easily identify the stored log file. Included in the zip file is an html file that documents the log files.
    Step 6 Enter the Email ID or Email IDs separated by commas to send the log file.
    Note To send the log file in a mail you must have Email Server Configured.
    Step 7 Click Submit.

  • Upgrading prime infrastructure 2.1.0.0.78 - 2.1 cannot do app backup

    Hi All
    Trying to do an upgrade prime 2.1.0.0.78  to prime 2.2.
    I have saved an app backup off the exisitng prime 2.1.0.0.78
    However when i try to restore to the new prime infra 2.2 
    with the backup from the 2.1.0.0.78 it fails with a database error
    My technical support say i should change the new vm server
    to match ip addresses etc with the old one but that cant be right
    as this is the official blurb for the types of backups ...
    Application backups: These contain all Prime Infrastructure application data, but do not include host-specific settings, such as the server hostname and IP address. Application backups are intended for use when Prime Infrastructure is running as an OVA on customer-supplied hardware, as restoring from the backup may need to be to a server with completely different host settings.
    Appliance backups: These contain all application data and host-specific settings, including the hostname, IP address, subnet mask, and default gateway. Appliance backups are intended for use when Prime Infrastructure is running on a Cisco-supplied appliance, and restoration is most likely to be to a server with the same host settings.  
    I am obviously using the application backups
    Kind regards
    Steve

    Here you go ....
    Initiating restore.  Please wait...
      Restore Started at 02/02/15 17:29:54
      Stage 1 of 9: Transferring backup file ... 
      -- completed at 02/02/15 17:30:59
      Stage 2 of 9: Decrypting backup file ...
      -- completed at  02/02/15 17:34:00
      Stage 3 of 9: Unpacking backup file ...
      -- completed at  02/02/15 17:34:01
    Stopping strongSwan IPsec failed: starter is not running
      Stage 4 of 9: Decompressing backup ...
      -- completed at  02/02/15 17:34:31
      Stage 5 of 9: Restoring Support Files ...
      -- completed at  02/02/15 17:34:32
      Stage 6 of 9: Restoring Database Files ...
      -- completed at  02/02/15 17:34:51
      Stage 7 of 9: Recovering Database ...
      Error while restoring and recovering database, please check the logs.

  • Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

    Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
    I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
    This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
    What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
    Everything was supposed to be backed up and restored after the update!
    Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
    Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
    Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
    Apple, you have no idea the level of stress you have created today.....

    Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
    ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
    I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

  • Error in Prime Infrastructure 2.0 after Controller upgrade

    Hello
    I've got two WiSM and Prime Infrastructure 2.0. Last week I upgraded one WiSM to 7.0.250.0, plus a third controller. That worked fine, but since then, my PI shows one of the two controllers of the second WiSM as "Unreachable". I rebooted the PI and also rebooted the controller again, to no avail.
    I tried now to update the snmp v2c credentials in PI, but receive an error.
    The error message shown when I try to update the credentials is:
    Error: Common-1: Some unexpected internal error has occurred. If the problem persists please report to the Tech Support.
    Error:Detail: errorId=6 Invalid credential name: snmp_transport.
    Any ideas?
    I can normally access the controller through its webinterface and don't see any errors that would spring to the eye.
    [edit]
    Just manualy run the Task "Controller Operational Status" and received this error:
    com.cisco.wnbu.server.common.errors.InternalException: COMMON-1
    Thanks
    Patrick

    I worked with TAC Team and the final solution was to delete all controllers and add them again. This might get fixed in a future version though.

  • "An error occurred while restoring from the backup.Files can't be restored"

    My 4 month old MacBook Pro 15" running 10.6.2 lobotomized itself and I had to have a new HD put in it. I backed up the old one w/ TM on an external HD. I've tried (by the book, and with direct verbal guidance from the Help People at Apple) to restore the system and files but every time it gets to 10.2% in the restoration process and then I get this message: "An error occurred while restoring from the backup. Please restart." and under the frozen progress bar is the chilling line: "Files can't be restored." I've tried restoring from several dates on the TM backup list but it always stops at 10.2% completion. Help!

    Hi.
    Start by booting from your SL install disc, and selecting Utilities from the menubar, but before going on to +Restore System from Backups,+ instead select +Disk Utility.+
    Make +*absolutely certain+* that your internal HD has the GUID *Partition Map Scheme* and the +Mac OS Extended (Journaled)+ Format (unless you're sure it should be +Mac OS Extended (Case-sensitive, journaled).+
    Then do a +*Repair Disk+* (not permissions) on your Time Machine drive.
    If that succeeds, quit Disk Utility, then continue with the full restore (per #14 in the FAQ).
    But if that finds errors it can't fix, it's possible that +Disk Warrior+ can fix them. It's about $100, and is probably a good long-term investment, but there's no guarantee.
    If all else fails, go back to Disk Utility and erase your internal HD, then install OSX. When your Mac restarts, use +Setup Assistant+ to transfer your users, apps, settings, and data from your backups (see #19 in the FAQ).
    Then download and instal the "combo" update to get back to 10.6.2. Info and download available at: http://support.apple.com/kb/DL959 (or http://support.apple.com/kb/DL1017 for 10.6.3).
    Be sure to do a +Repair Permissions+ via Disk Utility afterwards.

  • CISCO PRIME INFRASTRUCTURE 1.2 NCS ERROR

    Hi everyone,
    can anyone put through on this, i'm having issue starting the ncs server on cisco prime infrastructure 1.2 .below is the message i get when i do show ncs status:
    NGPHC-CPR001/admin# ncs status
    Health Monitor is running, with an error.
    failed to start NCS on startup Health Monitor
    Reporting Server is running
    Ftp Server is running
    Database server is running
    Tftp Server is running
    Matlab Server is running
    NMS Server is stopped.
    SAM Daemon is not running ...
    DA Daemon is not running ...
    Syslog Daemon is not running ...
    status
    thanks.

    Hi Marvin,
    Its has never worked. This is the first time i am installing it.
    I haved done as you adviced but still getting the same error as stated above.
    Please is there another way out.
    thanks.

  • Prime Infrastructure 2.1 - User add failed : Some unexpected internal error has occurred.

    Setting up Prime Infrastructure to manage 2504 WLC, trying to add Lobby Ambassador and I get this error message:
    User add failed : Some unexpected internal error has occurred. If the problem persists please report to the Tech Support.
    Technically, this is my second attempt at setting up PI.  I set it up initially with the wrong version of PI and created a lobby ambassador.  I followed the instructions from the forum with a similar problem that said to remove the trap receiver on the WLC from my first attempt at installing PI.
    https://supportforums.cisco.com/discussion/11110686/failed-add-device-wcs-reason-common-1-some-unexpected-internal-error-has-occured 
    I'm now able to add a Lobby Ambassador as long as its not the same username that I created on the previous PI setup.  So I suspect this Lobby Ambassador username is somewhere on the 2504 WLC, but I can't find it anywhere to remove it.

    I have just been struggling with a similar issue on a fresh install of Prime 2.1  Upgraded to 2.1.1.
    If I try to create the user with lobby ambassador role it just fails with "unexpected internal error".
    I eventually found that by creating the user as a normal admin user first - the user is added.  You can then go in a remove the admin role and change the role to lobby ambassador.  This works with no internal error and the lobby admin user is working fine.
    I would say it is just a bug.

  • Error code (-50) Restoring the Backup after upgrade to IOS 5

    When i finished upgrade my iphone 4 (IOS 4) to IOS 5 and trying to restore the backup file, there is a problem with message "An error occurred while restoring this IPhone (-50). Please help to get my all files back.

    0xE error http://support.apple.com/kb/TS3221

  • HT1766 I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!!  HELP!  iCloud backup/restore did not work

    I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!!  HELP!  iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • Error occurred while restoring from the TimeMachine backup

    I have an brand new HD that I want to restore from TimeMachine.
    Erased and partitioned this brand new drive.  Created 2 partitions and formatted as “OS Extended Journaled/ GUID.”
    Did a “Command R recovery boot” and went through the steps to backup from TM to my new HD.
             15 seconds into the restoration process Msg. reads: 
    “Error occurred while restoring from the backup.
    Restart your computer and then try restoring again.”
    Trouble shooting:
    Luckily my original files and initial boot drive that TM was backing up from remains fine and I performed some more TM back ups as well as a TM backup onto another drive as well.
    I even tried restoring to another empty drive with older backups and backups off of another HD and got the same error message.
    All my BU’s and BU attempts have been within 10.7.3 on the same MP.
    Thank you in advance for any help!!

    These are the four hard drives I am using for troubleshooting:
    1. Internal new 1TB drive
    2. External erased and reformatted 500GB firewire drive
    3. Internal original 500GB drive designated for TimeMachine with               
    ~200Gigs of successful backup (Including entire bootdrive)
    4. External erased and reformatted 300GB drive that I told              
    TimeMachine to back up to for testing purposes.
    I have only erased and reformatted the first 2 empty drives to use as a future boot drive once I can finally restore from my TimeMachine files to one of them successfully.
    My troubles all started when I couldn’t get my cpu to boot from my initial boot drive.  That’s what has put me on this track.  I have since repaired that boot drive with DiskWarrior to perfect order.
    Through a lot of my trouble shooting, I have left that initial boot drive in but have since taken it out.  I don’t have lion installed on any other drive.  Again, my 2 test drives are empty.
    I don’t know how long this old boot drive will remain in perfect order and am glad I have found that I cant use TimeMachine on this side of needing it desperately.
    Pondini- Thank you again for hangin' in there with me.  I think I understand your last recommendation: 
             Do I load a new copy of Lion from this location?:
    http://itunes.apple.com/us/app/os-x-lion/id444303913?mt=12&ls=1
    The suggestion of “coping the installer” is to have a hard copy like I used to in SnowLeopard etc. for a faster future install?

Maybe you are looking for