Prime Infrastructure 1.3 menu and dashboard customizing (via TACACS)

Hi there
I know the possibilities of virtual domains and group tasks in Prime Infrastructure. In this case, we have a PI 1.3 and I would like to ask, if someone know if there are ways to customize the following parts of PI:
1. Define customized templates on PI itself (show or hide different dashlets) and apply them via a TACACS+ attribute?
2. Show or hide specific submenu items on a menu in the lifecycle theme (for example, I would like to hide the submenu Wireless Configuration under Design)?
In my opinion, I think this is not possible, but I want to get sure about it.
Thanks in advance and best regards
Dominic

Hi Dominic,
1.customizing template is possible ,however "show or hide different dashlet is not possible.
when you create a new dashboard and add new dashlet into it , this will be specific to the use Only.
2.Unfortunately it is also not possible.
Thanks-
Afroz
***Ratings Encourages Contributors ****

Similar Messages

Upgradding Prime Infrastructure version 1.2 and LMS 4.x to Cisco Prime Infrastructure 2.0

Hello,
A customer currently have 2,500 Cisco Prime Infrastructure Lifecycle device license using Prime Infrastructure version 1.2 and LMS 4.x. the customer wants to upgrade to Cisco Prime Infrastructure 2.0.
Does anyone know if it is possible to upgrade to version 2.0 without additional cost? the licenses from
Cisco Prime Infrastructure 1.2 has to be upgraded or we need only to rehost the VUDI.
Also could be possible to upgrade LMS 4.x to Cisco Prime Infrastructure 2.0?
thanks!

The two features you mention are two big missing ones. Another is full syslog capability. I don't believe CiscoView or day one support via package updates is included either.
Another is less tangible - the depth of experience and documentation available for LMS vs. Prime Infrastructure (particularly the wired management features). I agree for wireless PI 2.0 looks good. Some new features are coming for wired that look promising but they are new as of PI 2.0 so I'm taking a wait and see on them.
I hope to get 2.0 up in my lab in the next week or so and will hope to be pleasantly surprised but that's seldom the case with a major new release.

Cisco Prime infrastructure Change severity Switches and hubs - link down alarm

Hi, I want to change the severity of the link down alarm in the Cisco Prime Infrastructure 1.3, but in the menu Administration -> System Settings -> Severity Configuration i can not find the alarm. Some body knows where is it? o where i can change the severity of that alarm?
Thanks in advanced.

Hi Rollin and Daniel,
the first test i did changing the severity was with a new installation, with no devices added and it worked, when i did it in a Prime infrastructure with devices added it didn´t work, well, for this Prime with devices i upgraded it with the patch for 1.3 version and now it works too, the alarms is ok as the alarm severity, this is the link for the patch:
http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272933&release=1.3.0&relind=AVAILABLE&rellifecycle=&reltype=all
i hope this helps,
Regards,
Milton Tizoc.

Prime Infrastructure 1.1 LMS and NCS installation.

Dear all
I have purchase below mention product. Now my question is that.
A> 1). Prime (2). LMS 4.2 (2). NCS 1.1 are they different software and has to install them separately ?
B> or The prime is the only virtual(.ova) software where there LMS and NCS works as a feature?
C> Please help me with the download link and installation guide..
CISCO
R-PI-1.1-K9
Cisco Prime Infrastructure 1.1
CISCO
R-PI-1.1-100-K9
Prime Infrastructure 1.1 Software - 100 Device Base Lic
CISCO
L-PILMS42-100
Prime Infrastructure LMS 4.2 - 100 Device Base Lic
CISCO
L-PINCS11-100
Prime Infrastructure NCS 1.1 - 100 Device Base Lic
CISCO
L-PINCSW11-100
Prime Infrastructure NCS WAN 1.1 - 100 Device Base Lic
With Regards
Tanmay
[email protected]

SOme of the similar discussion happened here, which would be helpful.
To answer your questions :
A.> Yes all three of them are separate software.
LMS :--> Ciscoworks Prime LMS is about to be end-of-life software which will phase out in favour of its successor Cisco Prime Infrastructure. This Software was the key application from Cisco to help manage the entire Wired Infrastructure for cisco devices, like Routers, switches, VPN, FW's, etc.
NCS:--> Wireless Control System (WCS) was the LMS equivalent software to manage Cisco's wireless infrastructure. It evolved as a new Generation Network Control System (NCS).
Cisco Prime Infrastructure :--> Cisco felt market demand to have a unified experience to manage both Wired and Wireless Infrastructure, hence Cisco Prime Infrastructure was introduced which is NCS+LMS. Not all features of LMS are migrated, hence customer's are allowed to use LMS latest version 4.2.x for wired network devices, if required.
B.> Prime is now provided with an inbaked Linux kernel to remove dependency from Windows or Unix (Solaris) OS, hence it is only available as OVA deployment image to be used under virtualized environment and can take benefit of virtualized infrastructure.
FOllowing are the download links :
Download LMS 4.2 here
Download PI 2.1 here
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

We are running Prime Infrastructure 1.3 primarily for wireless management at this point. We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out. While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features. For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers. I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment. Does anyone know when it's officially being released? Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are? I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management. Any useful information or links would be appreciated.
Thanks,
Christian

PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
For what does it have for customers?
> As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
-Thanks

Cisco Prime Infrastructure 2.2 clients and users IPs not detected

Hi all,
I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
please advice what may be the issue ?

Hi,
does anyone happen to know if that problem is fixed? My currently setup looks like this:
1. Cisco Prime Infrastructure 2.1 with updated device pack.
2. Assurance license
3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
regards
Maurus

Prime Infrastructure Manager 1.2 and Apple IPad

Is there a way to run Prime Infrastructure Manager on an IPad?

You can download the utility to run the cisco Prime
https://itunes.apple.com/us/app/cisco-prime/id556600515?mt=8
and other app created by cisco the may be helpful
http://www.cisco.com/web/about/facts_info/apps/ciscoapp.html?CAMPAIGN=tomorrowstartshere&COUNTRY_SITE=us&POSITION=vanity&REFERRING_SITE=vanity&CREATIVE=vanity+to+mobile+app

Prime Infrastructure no Interface Tx and RX Utlisation Graph on L2VLAN and PROPVIRTUAL Interfaces

Hello Community,
i'm wondering why don't get any interface statistics on subinterfaces or vlan interfaces on a router. On all other interfaces i see the graph.
Any Idea?
thanks in advanced
Alex

Hi Graham,
What settings do you have checked when you navigate to here?
Operate > Alarms & Events > Email Notification
Also you can define within your network what the level of alarming should be through navigation to here:
Administration > System Settings > Severity Configuration
It doesn't take much to become overburdened by alarms from Prime, I set only a couple of parameters as critical for switch and router state, and set to receive emails from those at this time.
Regards,
Brandon

Ask the Expert: Cisco Prime Infrastructure - Implementation and Deployment

Welcome to the Cisco Support Community Ask the Expert conversation.
This Ask The expert Session will cover questions spanning Cisco Prime Infrastructure on Implementation and Deployment on Wired and Wireless. This will be more specific to Customer’s and Partners questions product covering PI on configuration, Features and Menu, Network Monitoring, Maps, Implementation, High Availability and Maintenance and t/s parts.
Monday, February 2nd, 2015 to Friday, February 13th, 2015
Dhiresh Yadav is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco Prime Infrastructure and Cisco Wireless products. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS) and CCIE (DC) certifications.
Afroz Ahmad is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS),CCIE (DC), and SCJP (Sun Certified Java Professional )
Vinod Kumar Arya is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 8 years of industry experience working with large enterprise and service provider networks. He also holds VCP 5 and RHCE certifications.
** Remember to use the rating system to let the experts know you have received an adequate response.**
Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Network Infrastructure community, > Network Management, shortly after the event. This event lasts through February 13th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Hello Wilson,
Thanks for joining us.
1841 should just work fine for net flow . Hope you have a valid "PI Assurance license" installed on the server.
"PI Assurance license" is required for "net-flow" feature
Devices supporting Netflow in PI ::
1400, 1600, 1700 & 1800
2500, 2600 & 2800
3600, 3700, 3750 & 3800
4500 & 4700
AS5300 & 5800
7200, 7300, 7400 & 7500
Catalyst 4500 ASCI
Catalyst 5000, 6500, & 7600 ASCI
ESR 10000 ASCI
GSR 12000 ASCI
Cisco IOS Software Release Version
Supported Cisco Hardware Platforms
11.1CA, 11.1CC
Cisco 7200 and 7500 series, RSP 7200 series
12.0
Cisco 1720, 2600, 3600, 4500, 4700, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series
12.0T, 12.0S
Cisco 1720, 2600, 3600, 4500, 4700, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8600 series
12.0(3)T, 12.0(3)S
Cisco 1720, 2600, 3600, 4500, 4700, AS5300, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8650 series
12.0(4)T
Cisco 1400, 1600, 1720, 2500, 2600, 3600, 4500,
4700, AS5300, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8650 series
12.0(4)XE
Cisco 7100 series
12.0(6)S
Cisco 12000 series
NetFlow is also supported by these devices Cisco 800, 1700, 1800, 2800, 3800, 6500, 7300, 7600, 10000, CRS-1 and these Catalyst series switches: 45xx, 55xx, 6xxx.
NetFlow export is also supported on other Cisco switches when using a NetFlow Feature Card (NFFC) or NFFC II and the Route Switch Module (RSM), or Route Switch Feature Card (RSFC). However, check whether version 5 is supported, as most switches export version 7 by default.
You can check the below steps to diagnose the issue::
To verify that NetFlow is exported from a device to PI, follow the steps below:
1)   Browse to Administration > Data Sources page. Check the value in column ‘Last Active Time’ for the ‘Device Data Sources’ table. If the table is empty or the value does not represent recent time, then
it is possible that the device is not exporting NetFlow or PI Assurance license is not applied / expired.
2)   Login to PI console ( via SSH) as root user and run the command:
                netstat –an | grep 9991 – Output of this should be like : udp        0      0 :::9991         :::*
                Check the firewall settings on PI server using the command: firewall -L
1)   Check the configuration on an IOS / IOS –XE device. Run the commands
a)   sh running-config | inc destination
1)   This should list the IP address of the PI SERVER ( along with other outputs if any)
b)   sh running-config | inc 9991
1)   This should list at least one entry.
c)   If the above are fine, then verify that the flow monitor, flow exporter and the flow records are correctly configured on the device.
Refer to the URLs below to configure NetFlow export.
http://preview.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_monitor.html#wp1056427
Thanks-
Afroz
***Ratings Encourages Contributors ****

Prime Infrastructure 1.2.0.103 and Virtual MSE 7.3.101

Hi,
I cannot integrate Virtual MSE 7.3.101 with my Prime Infrastructure 1.2
After I setup MSE via its wizard, I make a change on WCS username and password.
When I try to integrate MSE with Prime Infrastructure, Prime notify me about the mismatch username/password.
Both systems are fresh install on my UCS C220 M3.
Does anyone has the same issue as me ?
Thanks,
Pongsatorn Maneesud

Hi Scott,
I decide to install a new Virtual MSE then after complete setup the initial wizard. This error appears,
when I check on the CLI of MSE, this message appears,
Does anyone can solve these issues ?
Need to resolve this since it gonna be on production soon.
Thanks,
Pongsatorn

Prime Infrastructure 2.1 Compliance Licensing

Till Date LMS and Cisco Prime Infrastructure are standalone applications and do not operate in sync.
If you deploy a new application server for LMS, it will be working separately and you can have its compliance manager running with this license applied.
Don't expect integration. Even though PI is eventually destined to be the primary NMS application from cisco and LMS to suppose be phased out, still CPI hasn't reached the feature parity as per LMS, so we still offer our customer's option to run LMS for those features they don't find in CPI.
So as per your question :
So does this mean, if I have purchased the compliance licenses, I have to deploy LMS 4.2 to utilize these licenses?
The Answer is unfortunately yes.
-Thanks
Vinod

Yes, ideally you should have received multiple PAK or license files, like base license for PI and add-on device license etc. Any one of them having **LMS** in the PAK/Licence file name refers to a LMS license.
You should check more details with the vendor or your cisco's account manager.
LMS has various modules embedded in itself like configuration archive, performance, monitoring, inventory management, compliance manager etc.
It has central device repository from where all these modules get device and credential information. You'll have to configure various compliance jobs/templates etc with one or group of devices to run once or periodically.
Compliance DB stays in sync with LMS and from there you can use it. If you are planning to use Compliance, you can install LMS and use compliance under 60 days evaluation period.
For more details check the document :
Using Compliance and Audit Manager Feature
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

A job in Cisco Prime Infrastructure 2.1 has been running for 50 days

I found a job (SAM_Poller_22_15_GETVPNPoller_1878262177) in cisco prime infrastructure 2.1 (Administration -> Job Dashboard -> System-defined), which has been running for about 50 days. Is this normal? How can I stop it? Thanks for any help..
SAM_Poller_22_15_GETVPNPoller_1878262177
PollerJob
In-Progress
Running
2014-09-19 01:28
49 Days 01 : 28 : 37

Not normal, seems to be stuck. Try to stop (ncs stop) and start (ncs start) the system processes, which should stop this job.
If it happens again, i would recommend to open a TAC case for further investigation.
-Thanks
Vinod

Prime Infrastructure Device Configuration

I recently installed Prime Infrastructure to replace LMS and NCS, but I've encountered an issue with changing device settings. I had a controller set up to pull configs with no issue, but I had to change the IP to move it to a different VLAN ("it" meaning the controller). After I changed the IP, the device showed that it was unavailable in the device/operation dashboard in Prime INF, as expected.
Now, I can't find a way to change the IP address of the controller in any way, shape or form. It allows me to change everything else, but not the IP address. The only option I have is to delete the object and add a new one, which will remove access to the saved configurations.
I'm not sure if this is a bug or that it's defective by design, but if you can't change the management interface IP for a device without adding a new one, you've got a bit of a problem.

That directory doesn't exist
ade # ls -al /var/adm/CSCOpx/files/rme/dcma/shadow
ls: /var/adm/CSCOpx/files/rme/dcma/shadow: No such file or directory
ade #
ade # ls -al /var/adm/
ls: /var/adm/: No such file or directory
I guess the configs are not in individual files but within the database

Cisco Prime Infrastructure multitenancy?

Hi can someone please give me an indication if Cisco Prime Infrastructure supports multitenancy? and if so how this is achieved?
I would like to monitor/managed multiple customers who may have overlapping private IP subnets
Thanks

Hi,
With CPI v2.0 there is a multi-customer license:
"L-PI2X-MSP-1 Cisco Prime Infrastructure 2.x Multicustomer 1 Customer RTU"
What is this license intended for?
Is it safe to assume that CPI v2.0 also does not support multi tenancy?
Then there is CPI v2.0 for Service Providers.
"R-PI2X-SP-K9 Cisco Prime Infrastructure 2.x Service Provider"
Is this version multi tenant capable?
What is the difference between the two?
Thanks.

Cisco Prime Infrastructure 2.0 not showing alerts from switch

Hello,
I have a prime infrastructure 2.0 running at a customer place and the customer now complains that he is not receiving link up/down messages from the switch. When i checked I have seen that if I shut down a port in the switch the prime identifies after a long time, but its not generating an alarm still. How can I fine tune the prime to fix this issue. Please help on this.
Thanks in advance

Hi,
Same problem here.
I am using Cisco Prime Infrastructure 2.0 (evaluation version for 60 days). I want to deploy port monitoring for my trunk ports between switches and some other important ports e.g. servers. Basically I want to get alarms when these ports are down, there are errors on ports and etc.
So in Design>Port Grouping I created User Defined group with important ports. In Deploy>Monitoring Deployment I selected Interface Health (default)>Deploy selected Port Groups and when selected port group I created.
Now the rule shows Deployed: Yes and Status: Active. After that I just pulled out one port which was in monitored group, waited 5min as it is set in Interface Health (default) template, and nothing happened, and worse, alarms started to show up of other ports where regular users are connected (computers was turned off), which I do not want to see at all. I tried redeploy template, I even created my own template but still no desired result.
Any suggestions how to make port monitoring work?

Prime Infrastructure 1.3 menu and dashboard customizing (via TACACS)

Similar Messages

Maybe you are looking for