Prime Infrastructure 1.4 e-mail from virtual domains

Hi
Is there any way in PI 1.4 to configure e-mail alerts to be sent to different recipients for different virtual domains. We have several large sites, each with their own controllers and AP's (16 controllers & 4000+ AP's) and I'd like to be able to set things up so that the admin for each site gets any alerts for that site e-mailed only to them. The only way I can find to group the site devices is to put them in a virtual domain (subordinate to ROOT-DOMAIN) but e-mail recipients only seem to be configurable from ROOT ?
So would have:
Site A, controller A & AP's, alerts e-mailed to Admin_A
Site B, Controller B & AP's, alerts e-mailed to Admin B etc.
Thanks
Alan

This is exacly what I am trying to do as well Kilravock. We have a distributed management model where I would like to have the email alerts sent to the admins for each domain.
If someone knows how to perfom this I would love to hear how to do it because I can't find instructions in any of the Ciso documentation.
Any insight would be apreciated!
-Thanks in advance

Similar Messages

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
I'm looking to add another domain as a secondary way for people to get to my content and information.
I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
How do i do that?

it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

Can't receive mail from external domains (hotmail, gmail, etc)

Hi,
I have a new problem
I can't receive external email. The receive connector that i have is the following:
Default Frontend NAME.NL
TlS, Basic verification, Basic after TLS, Intergrated, Exchange verification. groups: Exchange-server,
exchange-user and anon
This should be enough to receive external mail right? If I test it with gmail or hotmail I get the message: Mail delayed

Hi,
Is there any update?
Thanks.
Niko Cheng
TechNet Community Support
Sadly no.
I still don receive any mail from certain domains. And gmail still has a +/- 24 hour delay. We now didn't receive some important mail for 1 and a half week. Any more idea's. I'm totally out of ideas

Can not receive mail from outside domains

We are setting up our OCS 10g mail server, and are having trouble setting up our policies.
-unsure how to allow mail to come in from outside domains
-are able to send mail to outside domains if that one is set. is there a way to allow to send to any outside domain without having to set every single one?

it looks like the MX records are setup correctly now, but I am still unable to receive mail from outside domains.
from a gmail address i get the error:
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
TEMP_FAILURE: Could not initiate SMTP conversation with any hosts:
[mydomain.com. (10): Connection timed out]
----- Original message -----
Received: by 10.70.123.6 with SMTP id v6mr2951750wxc;
Thu, 29 Jun 2006 05:22:06 -0700 (PDT)
Received: by 10.70.105.2 with HTTP; Thu, 29 Jun 2006 05:22:06 -0700 (PDT)
Message-ID: <[email protected]>
Date: Thu, 29 Jun 2006 09:22:06 -0300
From: "Chris M" <[email protected]>
To: [email protected]
Subject: test thursday 1
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_77974_24025125.1151583726769"
------=_Part_77974_24025125.1151583726769
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
test
------=_Part_77974_24025125.1151583726769
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
----- Message truncated -----
** i modified the email addressed for the post, actual email addresses were used **

Cisco prime Infrastructure alarms by e-mail

hi all,
my Cisco PI1.2 not send me a notification e-mail with specific alarm if occurred twice and the first time is not cleared or deleted.
i.e.
if a switch is down it send me a notification e-mail, and this switch comes up again but i did not remove the first alarm, the PI not send me a notification.
please advice
thanks in advance

Alarm Status
Description
New
When an event triggers a new alarm or an event is associated with an existing alarm.
Acknowledged
When you acknowledge an alarm, the status changes from New to Acknowledged.
Cleared
An alarm can be in these statuses:
Auto-clear from the device—The fault is resolved on the device and an event is triggered for the same. For example, a device-reachable event clears the device-unreachable event. This in-turn, clears the device-unreachable alarm.
Manual-clear from Prime Infrastructure users: You can manually clear an active alarm without resolving the fault in the network. A clearing event is triggered and this event clears the alarm.
If the fault continues to exist in the network, a new event and alarm are created subsequently based on the event notification (traps/syslogs).
This might be the reason, I believe.
Please refer the following link for better understanding.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/alarms.html
Hope that helps.

Prime Infrastructure 1.2.0.103 and Virtual MSE 7.3.101

Hi,
I cannot integrate Virtual MSE 7.3.101 with my Prime Infrastructure 1.2
After I setup MSE via its wizard, I make a change on WCS username and password.
When I try to integrate MSE with Prime Infrastructure, Prime notify me about the mismatch username/password.
Both systems are fresh install on my UCS C220 M3.
Does anyone has the same issue as me ?
Thanks,
Pongsatorn Maneesud

Hi Scott,
I decide to install a new Virtual MSE then after complete setup the initial wizard. This error appears,
when I check on the CLI of MSE, this message appears,
Does anyone can solve these issues ?
Need to resolve this since it gonna be on production soon.
Thanks,
Pongsatorn

Prime Infrastructure 2.1 - getting informations from Nexus7Ks about ip to mac to physical pot table

Hello,
does anybody know if there's a way to get the following informations out of nexus 7000 and nexus 5000/2000 switches?
Environment/requirements:
- snmp v3 has to be used
- N7ks are configured with several vrfs
- SW N7K: 6.2.8a
- SW N5K: 6.0(2)N2(4)
- Prime Infrastructure 2.1
I want to see under Clients and Users entries about mac-address, ip-address, interface and vlan.
At the moment, I only get informations from N5Ks/N2Ks without ip-addresses. From the N7ks I don't get any informations.
Any hints or tricks, how to get these informations with PI2.1 out of the nexus boxes?
best regards
Markus

Hi Andy,
Check the below link , as per this Doc .. User tracking is supported in 2.0:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
Thanks-
Afroz
[Do rate the usefu post]

DNS for Mail service Virtual Domains

On a server primarily running as a Mail server with 10.6.3 (DNS and OD also running)
If host name is mail.domain.com and
if mail service has a virtual domain virtualdomain.com,
in the DNS setup, virtualdomain.com should have an MX record like mail.virtualdomain.com and either an A record pointing to the IP of mail.domain.com OR a CNAME pointing to mail.domain.com?
When setting to the CNAME, DNS logs says:
"25-May-2010 11:47:52.610 zone virtualdomain.com/IN/com.apple.ServerAdmin.DNS.public: virtualdomain.com/MX 'mail.virtualdomain.com' is a CNAME (illegal)"
but if I set to an A record pointing to the IP, isn't there a PTR conflict with the mail.domain.com pointing to the same IP?

SMTP requires an A or AAA as the required response for the box named in an MX.
Your MX for the domain or subdomain would/should/must aim at an A or AAA.
Not a CNAME. That's considered illegal.
Yes, random domains can all have their respective MX records pointing to the same mail server. So long as the mail server has an A or AAA record. And that mail server itself is expected to be configured to accept mail for those domains for local delivery, or as part of a relay.

Send connector - e-mails from two domains to distinct anti-spam IPs

I have an Exchange enviroment that has two domains. I want that e-mails sent from a domain do the relay to an anti-spam, and e-mails sent from another domain do the relay to another anti-spam.
Example:
I need to config send connector to send the e-mails from "test1.com" to IP 10.160.190.66 and from "test2.com" to IP 10.160.190.69
How do I do?
I need this because each domain uses distincts anti-spam
Tks.

Hi,
Before going on, I would like to confirm the following information.
What's the version of the Exchange?
Whether the two domains have their own Exchange or share one Exchange?
Thanks
Allen

Filter set to pass mail from legit domains?

The address (I have many) I use with professional and social networking sites has fallen into the spam space. Using Apple Mail 5.2 I'd like it to consider all mail *not* from certain domains to be considered spam.
In the filter Rules I see the qualifier "Sender is not in my Address Book" but these legit domains send many e-mails and are often slightly different. What is constant is the domain name (Facebook, Linkedin etc). Is there a way to tell Apple Mail that everything sent to a certain mailbox is Junk except mail for a handful of domains?
Thanks in advance,
Paul

Try this rule:
"If [All] of the following conditions are met" - "From" - "Does Not Contain" - <the appropriate domain name> with one entry for each domain - "Move Message" to mailbox "Trash".
Regards.

Is mail for virtual domains fixed in snow leopard?

My goal is to set up several different domains, and have email for users for each of those domains
In 10.5 (Leopard) you could set this up by creating virtual hosts (for the extra domains), and by creating an email alias' --- however this was broken functionality requiring significant (to me at least as I am not a programmer) manual circumvention of the setup and administration tools provided by apple
Does anyone know if this is now fixed in 10.6 (snow leopard)? Can I, just using the admin tools and without any behind the scenes programming tweaks, set this up?
Cheers,
Brad

It's not clear which "manual" you used to set up virtual domains.
Look at this white paper from osx.topicdesk.com:
http://downloads.topicdesk.com/docs/MakingVirtual_Mail_Users_in_OS_XServer.pdf
and this white paper about setting rejections for virtual users:
http://downloads.topicdesk.com/docs/RejectingMail_before_filter_in_Mac_OSX.pdf
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u

Mail redirect rule only redirects mail from certain domain!!!

Hi all,
I set up a rule in Mail to redirect EVERY message to a certain email address (for backup/storage purposes) However it only redirects emails from email addresses with the same domain as my email (eg will redirect mydomainname.com but not otherdomainname.com
Why is this??? Any ideas on how to fix it??? It is getting the mail from an Exchange server if that helps any...

Thanks for the welcome!
Ok so here are some screenshots...
Here is the screenshot of the rule details
Here is the main rules window
And here is a screenshot showing how some are redirected and some are not (the ones that are redirected (and the one that shows the forward icon (it was forwarded before I set up the redirect rule)) are all from the same domain as my email account.
Any ideas? Thanks!

Drop incoming mail from specific domain.

Is this possible and if so how do I configure?
I want to be able to drop incoming mail from, lets say, "@bigspammailer.com". Is there a way to do this? I have created an "Incoming Mail Policy" but don't know where to apply it.
What I've tried that has not worked ....
Incoming Content Filters, created a filter with Condition of "mail-from = = "@myemaildomain.com"$", and an action of "Drop".
HAT Overview, creating a Sender Group using Mail Flow Policy "BLOCKED" setting SBRS to various settings including "None".
I've grown exhausted reading through manuals. If you know of a document that directly addresses this issue (assuming it's possible) I'm not opposed to reading it.
Any help will be greatly appreciated!
Jim Mc.

Sender Groups can be used to block messages based on the hostname or IP of the sending machine. It does not look at who the message is "from." To block mail based on the envelope sender you need to use a Filter or the Sender Verification Exception Table.
Your example of a content filter seemed ok but after you create a filter you need to make sure that it is enabled for the incoming mail policy. Create your filter and then select Mail Policies -> Incoming Mail Policies. Under the column called Content Filters you will need to
1) turn content filters on (default is off)
2) enable the specific content filter that you just created
You can also enter it in the Sender Verficiation Exception Table. You need to enable it under your ACCEPTED policy under Mail Policies -> Mail Flow Policies. There is a radio button all the way at the bottom for the exception table. Once you have it enabled then you can select Mail Policies -> Exception Table and add @domain.com to always reject.

Prime infrastructure 2.0 - Inventory error with Virtual-Access Interface

Hi,
We have recently been trying to resolve a few issues with routers which get partial inventory failures upon discovery. I have managed to narrow this down slightly with the help of the inventory.log file. (With help from this post https://supportforums.cisco.com/thread/2255346 ) I have found the following happnes when this device is added:
[2014-03-04 14:00:27,537] [ICE Service[ 1]Thread: 29] [inventory] [ERROR] - 172.16.3.202 Object detected as SAME but DB Object obtained from the database is NULL For instance id: 0 For generated POJO: PPPEncapsulation[callBack=false,callIn=false,callOut=false,multilink=false,name=Virtual-Access1,oneTime=false,owningEntityId=69757688_172.16.3.202,preferedAuthType=NONE,deployPending=NONE,name=Virtual-Access1,owningEntityId=69757688_172.16.3.202,instanceId=0,_orderedListOEIndex=<Integer>,_creationOrderIndex=<Integer>,instanceVersion=0]
I have highlighted above where it mentions the problem with the virtual access interface. The configuration on the router is for PPPoE and the virtual-access1 interface is bound to Dialer0.
It then goes on to roll back the transaction:
172.16.3.202 persistObjects called with addList size = 307, updateList size = 6
172.16.3.202 Exception while persisting: com.cisco.xmp.persistence.common.util.DMMCRUDException:,message=errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Exception occured while inventory collection for device with id 69757688: com.cisco.xmp.inventory.ice.InventoryException: errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Done with collection. Total call method time: 15308
172.16.3.202 Rolling back the transaction
Has anyone else come accross this issue?
I have attched the log showing just messages from this device.
Thanks,
Mike.

TAC and I found a bug, CSCum05301.
May be that is also helpfull for others.
https://tools.cisco.com/bugsearch/bug/CSCum05301/
Symptom:
Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
Following error message is visible on the DWC:
Inventory Collection Status: Partial Collection Failure
Collection Status Failed feature(s)
Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
Conditions:
Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
For example:
interface FastEthernet0/3
description 10Mbps
Workaround:
Use a space character between number and unit keyword, like 1 Gbps.

IPhone 6 Mail App stops fetching mail from own domain ID

The Mail App on iPhone 6 (with latest OS), seems to be fetching all my emails, including two other own domain IDs, except one.
It fetches for a few days then stops. I have to delete the mail account, re-create it on the iPhone, it works fine for some days, then stops again.
Has anyone else faced and solved this problem?

Who is the email provider? Its the default email servers of DreamHost. I am using IMAP4.
Also, the email works fine for a while, so I guess the settings must be OK. Then it STOPS fetching new mails, despite refreshing. But it continues to SEND.
Yes the settings are verified. I have another own domain email ID from them which is working fine on the same iPhone.
Here is the reply from my hosting provider:
I'm very sorry to hear about this issue but unfortunately this is not
something we can address. As you noted if you reset the account is works
fine for a while. There are not changes we are making to our mail servers
that could account for that. I've tested the [email protected]
account myself and confirmed that SMTP, IMAP and POP are all working
fine.
This points to the issue being with the the phone and/or IOS 7/8 and
again that's not something we can help you with. I might suggest you
contact Apple directly so that this can be addresses as a bug and handled
on their end.
I'm very sorry I'm not able to do much in this instance. If you need
anything else or have any further questions please let me know."

Prime Infrastructure 1.4 e-mail from virtual domains

Similar Messages

Maybe you are looking for