Prime Infrastructure 2.0 is not accepting ubf patch file for upload

Hi,
After successfully installing Prime Infrastructure 2.0 on a single server via OVA file in ESX, i tried to install all the latest patches.
- pi_update_2.0-3.zip was installed successful
But for the patch "pi_dev_pack_update_2.0-10.ubf" i was not be able to do the file-upload via the Web-GUI.
Is there anyone who knows how to put this file on the Prime server and how to install this patch via CLI ?
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.6.003-px-build
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: xxxxxxx
Version information of installed applications
Cisco Prime Infrastructure
Version : 2.0.0.0.294
Kind regards,
Danjan Mudde.

Hi Danjan,
****These patches cannot be applied via cli and can only be applied from GUI of Prime*****
Go to the link below and download the "pi_dev_pack_update_2.0-10.ubf"
http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=28
4272933&release=2.0.10&relind=AVAILABLE&rellifecycle=&reltype=all
After downloading the file, go to "Administration > Software Update", click upload
update file, browse to the file location that you've downloaded.
Once the file has beenuploaded, you can select the update and click install.
After installing, it shouldindicate "Pending Restart" = Yes. You will likely need to
go to the cli and do an "ncs stop" and then "ncs start".
Hope it will help
Thanks-
Afroz
[Do rate the useful post]

Similar Messages

ITunes will not accept my .xml file for podcast

I'm really not exactly sure what I am doing wrong here. I have done a handful of podcasts over the years and never had a problem submitting a new feed. Now that I have a new show that I want to submit, iTunes give me the error: We had difficulties reading this feed, connection reset. I have done some Google'ing but can't really seem to find the exact answer as to what is wrong.
Here is my feed: http://www.howdyinc.com/sass/itunes.xml
Any help would be much appreciated. Many thanks in advance.
B.

FeedValidator finds no errors, and you feed can be subscribed to manually in iTunes (from the 'Advanced' menu). However your 'enclosure' tag is not structured in the normal way and this may be the issue. It reads:
<enclosure url="http://www.howdyinc.com/sass/SASS.01.mp3" length="11639193" type="audio/mpeg" ></enclosure>
It should read
<enclosure url="http://www.howdyinc.com/sass/SASS.01.mp3" length="11639193" type="audio/mpeg" />

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G.

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

Hi,
CS6
Van: R_Kelly [email protected]
Verzonden: maandag 16 september 2013 18:42
Aan: Hans van Sloten
Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
created by R_Kelly <http://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?

Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin

Outlook 2010 does not accept password & prompts repeatedly for a password

I'm trying to configure an exchange account. I can access the account on outlook.office365.com & my phone. After I enter my user name & password & click next, a Windows Security window opens up ( the window says Mail Application, connecting
to my username, remember my credentials) asking for my password. When I enter My password it is not accepted and prompts repeatedly for a password. When I cancel a Microsoft Exchange window pops up with the microsoft exchange server address & my mailbox.
Checking the name opens up the Windows Security windows & My password it is not accepted and prompts repeatedly for a password. I also get an error message: the name can't be resolved. Connection to MS exchange unavailable.
Any suggestions will be appreciated.

Hi,
For the issue of save password setting not retained in Outlook, I would suggest you to follow the steps mentioned in below KB article and see if it helps:
http://support.microsoft.com/?id=290684
For the specific error message you mentioned in the post:
"the name can't be resolved. Connection to MS exchange unavailable)"
Usually, it means there is something wrong on your Exchange server side, I would suggest you to check with your mail administrator on this.
More reference about this Outlook error message:
http://www.msoutlook.info/question/531 (Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Thanks,
Ethan Hua CHN
TechNet Community Support

Lightroom 4--4.1---4.2 will not accept .mpg video files

Lightroom 4, 4.1 and 4.2 will not accept .mpg video files. I have to Convert these files from .mpg to mp4 in order for any of the lightrooms 4--4.2 to accept the videos. Yet in the http://helpx.adobe.com/lightroom/kb/video-support-lightroom-4-3.html it states : Extensions supported---MPG, so why do I have to convert all my video files to mp4??????

A particular file extension doesn’t dictate the actual video and audio codecs in a particular video file. I expect what is happening is that LR doesn’t understand one or both of the codecs and it needs the file converted one a set it does understand.
Did the videos work in LR3 but not LR4?
Can you play the original MPGs in QuickTime?

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

ADD FILES FOR UPLOAD - IMAGE PATHS DO NOT WORK IN WIDGETS

Hi There
I'm trying to add my own images to a widget I bought from Qooqee - the Wrapper_v2 image slider. But when I try to add my own images with the image path it doesn't work. I've tried adding the image with 'Add Files for Upload' - and then using the full path which I get from right clicking on it in the assets panel - but it still doesn't work.
Most of the widgets require you to either specify the image path, or an external URL. I do not want to use a third party image hosting site to get URL's for every image I want to use on the site - so I just need to know what I'm doing wrong with the Add files for Upload - why do my file paths not work in the widgets?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???
Also, you need to ask for help from the widget maker

Camera RAW does NOT yet support raw files for the new Canon Sureshot S95

Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asap

Hello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

Message 2100 not found; No message file for product=RDBMS, facility=UL

Hi,
I am trying to run sqlldr. But I got this message:
Message 2100 not found; No message file for product=RDBMS, facility=UL;
I checked my ORACLE_HOME and it is set to: C:\oraclexe\app\oracle\product\10.2.0\server which includes the folders BIN,RDBMS, ....
I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS.MSG inside the folder. If this is the solution where can I find this file? I read in the forums to copy it from the server directory to the client, but I couldn't find it anywhere on my machine.
Thanks,
M

Thansk, I really appreciate your help. This is the result:
AGSDESKTOPJAVA=C:\Program Files (x86)\ArcGIS\Desktop10.0\
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Matt\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=Smith
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Matt
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_23
LOCALAPPDATA=C:\Users\Matt\AppData\Local
LOGONSERVER=\\Smith
NUMBER_OF_PROCESSORS=2
ORACLE_BASE=C:\oraclexe\app\oracle
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
ORA_NLS=C:\oraclexe\app\oracle\product\10.2.0\server\nls
OS=Windows_NT
Path=C:\XEClient\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows
\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerSh
ell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\MATLAB\R
2010a\runtime\win64;C:\MATLAB\R2010a\bin;C:\Program Files (x86)\Common Files\Rox
io Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLSh
ared\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 6 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0602
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\10.0\Roxio Central
36\
SESSIONNAME=Console
SQLPATH=C:\XEClient\sqlplus
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Matt\AppData\Local\Temp
TMP=C:\Users\Matt\AppData\Local\Temp
USERDOMAIN=Smith
USERNAME=Matt
USERPROFILE=C:\Users\Matt
VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
windir=C:\Windows

Message 2100 not found; No message file for product=RDBMS, facility=ULMessa

hi all,
I am using windows2000 and 10g i am running loader using java
but getting a message like
Message 2100 not found; No message file for product=RDBMS, facility=ULMessage
I have checked oracle_home and path in my env setting. but no progress same message i am getting
but its running fine using cmd prompt.
please help
thanks in advance.

First 10g is not a version it is a marketing label. What is the version number (to 3 decimal places).
Second can you expand your question to explain you this has to do with AQ? How are enqueued, what code is executing to dequeue? We can make guesses but they may have nothing to do with your actual environment.

Photoshop CC with CS3 will not open Nikon NEF files for the D610.[was:CC]

Photoshop CC with CS3 will not open Nikon NEF files for the D610. Is there a fix for this? Fast Eddy

I assume you're running Photoshop CC (not sure what you mean by "with CS3" unless that's the version you upgraded to CC from)
Download Camera Raw 8.3RC
http://labs.adobe.com/technologies/cameraraw8-3-cc/?tabID=details#tabTop

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

Prime Infrastructure 2.0 is not accepting ubf patch file for upload

Similar Messages

Maybe you are looking for