Prime Infrastructure 2.1 problem with sorting devices in device groups

Hi,
I have a problem with prime infrastructure, namely prime is not doing appropriate sorting of devices in default device groups.
Example: device type > routers > Cisco 2800 series integrated services routers - under shown results there are Cisco 2911 Integrated Service router, Cisco 2901 etc.
Any solution?
Tnx

Hi all:
I have tried using Designing Monitoring Template to set the Health Check Polling time from default 15 minutes to 5 minutes and also tried also 1 minute.
The result is 5 minutes is working but 1 minute is not working.
May I know any one can help on this?
Many thanks!
Best regards,
tangsuan

Similar Messages

I have a problem with my PC mobile device that the keyboard stop working and the mouse also

I have a problem with my PC mobile device that the keyboard stop working and the mouse also

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

I have a problem with my apple mobile device support file

Hey guys!
i'm really having a problem with my apple mobile device..
whenever i connect my cable to my computer WITHOUT the apple mobile device support file/program..my ITOUCH can sync and it WORKS!
but ITUNES doesnt sync in with my itouch because ITUNES doesn't work without the apple mobile device support program.. SO...
i reinstalled my ITUNES
i reinstalled my mobile device support file/program
i even changing it to AUTO (what they said about control panal, program, service, thingy)
I RESTARTED everything.. i think i did almost everything there is in apple support!
with NO LUCK! was it able to connect my computer.. UNLESS i take the apple mobile device support program OUT! @.@
i really need your help guys D:
P.S i dont have a Virus! i have a really good computer that is stable, so i'm certain i dont have a virus doing this.. but do you happened to know why it's causing this? Also how can i fix it?
BTW.. IT IS A CODE 52 i don't know what that means..
PLEASE AND THANKS YOU GUYS~ <3

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

Problem with sorting involving user defined types and reports

Hello!
I have a problem with sorting involving Reports and user defined objet types.
I have created the following object types
CREATE TYPE type_balance_compte AS OBJECT
NUM_CPT_SEQ NUMBER(8)
,NUM_CPT VARCHAR2(35)
CREATE TYPE TB_type_balance_compte IS TABLE OF type_balance_compte
At the reports query I use:
SELECT ...
FROM table(cast(test_pkg.balance_comptes(:P_num_soc) as TB_type_balance_compte)) c
The procedure balance_comptes will retrieve data from various tables into the type.
The report is ordered by a certain string field that usually contains characters and numbers.
I need to have numbers always before characters, meaning the data should come in this order in the report for example:
0
1
A
B
So, before the report query, I have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) to guarantee NLS_SORT in case it is originally set to FRENCH.
The problem here is that even after this call, I have the report ordered like this
A
B
0
1
And not the numbers before as it should be.
To try and find out where the problem was, I have created a table to use instead of the object type described above. In this case, it worked correctly. So all I know by now is that is has something to do with the type or cast, but what exactly? Does anybody now how to solve this without using a table?
Many thanks
Ariadne

I have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) why not order directly then:
SQL> select *
      from table (sys.dbms_debug_vc2coll ('A', 1, '5', 'C', 'a'))
order by nlssort (column_value, 'NLS_SORT = binary')
COLUMN_VALUE
1
5
A
C
a
5 rows selected.?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

TS1363 I Have Problem With My Apple Mobile Device Driver It says "This device cannot start. (Code 10)" What to do?

When I plug My device To Pc(Windows Xp) It says Problem With Your Apple Mobile Device Drive ,I cheak in Device manger Its shows "This device cannot start. (Code 10)" Help pls..

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

Prime Infrastructure 2.2- problems: Wired Detailed Device Inventory report not running / Cisco 5500 WLCs no listed in subgroup

New installation of Prime Infrastructure 2.2.0 (PI-VA-2.2.0.0.158.ova)
installed fixes/software/device packs:
PI 2.2.1 Poodle Fix (installed)
PI 2.2.1 Maintenance Release (installed,ncs stopped,rebooted)
Prime Infrastrucutre 2.2 Device Pack 3 (installed,ncs stopped,rebooted)
Licences installed (ncs stopped,rebooted)
Added all devices via Bulk Import (Inventory>Device Management>Network Devices)
Problem 1:
The Cisco 5500 WLCs are not listed in Inventory>Device Management>Network Devices (see screen shot) but listed under "All Devices"!
The Cisco 4400 WLCs and the 8500 WLCs are listed within their subgroup.
Devices are in "Managed State"
Problem 2: fixed! (Browser issue)
Problem 3:
Unable to run "Wired Detailed Device Inventory" report because I get the error message: Failed to run report: Unable to retrieve data for: Chassis Information (if Chassis Information is selected, if System Information is selected I get the error message with ...retrieve data for:System Information)
All devices do have an "Admin Status = Managed" and the Last Inventory Collections Status = Completed.
Has anyone the same issues or a tip for me?
Another topic, the "User Defined Fileds" are not exported when with running a "Device Export" (Inventory > Device Management > Network Devices). ;-(
BR
Bastian

Hallo Bastian,
I think you still have browser issue, Using IE is still the best with Prime.
I have exactly same prime 2.2 and installed fixes/software/device packs.
I have no problem I can see all views. I use now IE 11, with Chrome 42.0.2311.90 and firefox 37.01 I have problems too with lots of views. You have not tell what browser + version you have.
Since you have same prime 2.2 as me. I have other problems, can you check yours?
Can you see a functional CLI template page at Configuration > Templates > Features & Technologies:
https://supportforums.cisco.com/discussion/12481691/can-cisco-prime-22-still-do-simple-ad-hoc-deployment-job-cli-over-all-switches
Do you have SNMP Connectivity Failed while Verify Credentials has no errors all green and checked.
https://supportforums.cisco.com/discussion/12494786/snmp-request-exceeds-internal-data-buffer-512-bytes-prime-22-asa-5545

Prime Infrastructure 2.x tacacs+ with radiator

Trying to setup Prime Infrastructure 2.x (2.2) to use Tacacs+. The Tacacs service is running on a Linux server running Radiator(4.12). With Radius and Radiator all we needed to do is define the user group and all the tasks associated with that group were inherited.
When configuring the TACACs configuration files have tried various permutations of adding the cisco-avpair(cisco-av-pair) reply attrs on authentication and/or authorization. When defining the group or using the individual tasks I get the following error message:
"no authorization information found for remote authenttication user. please check the correctness of the associated task(s) and Virtual Domain(s) in the remote server"
<ServerTACACSPLUS>
Key SECRET
Port 49
GroupMemberAttr OSC-Authorize-Group
# General Authorization rule format:
AuthorizeGroup core-group permit protocol=HTTP service=NCS {cisco-av-pair="virtual-domain0=ROOT-DOMAIN" cisco-av-pair="role0=Super Users" }
</ServerTACACSPLUS>

It's not yet supported. Cisco doesn't generally publish roadmaps publicly for future support. The best you can do via public sources is to continue to watch the Supported Devices lists for updates.
As of right now, here is a list of the current data center switches supported (in PI 2.1):
Cisco Nexus 6004 Switch
Cisco Nexus 5596T Switch
Cisco Nexus 5010 Switch
Cisco Nexus 5020 Switch
Cisco Nexus 5020T Switch
Cisco Nexus 7000 10-Slot Switch
Cisco Nexus 7000 18-Slot Switch
Cisco Nexus 1000V Series Switches
Cisco Nexus 1010 Virtual Services Appliance
Cisco Nexus 4001I Switch Module for IBM BladeCenter
Cisco Nexus 4005I Switch Module for IBM BladeCenter
Cisco Nexus 5548P Switch
Cisco Nexus 5548UP Switch
Cisco Nexus 5596UP Switch
Cisco Nexus 3064 Switch
Cisco Nexus 3048 Switch
Cisco Nexus 3016 Switch
Cisco Nexus 7000 9-Slot Switch
Cisco Nexus 9500 Switch
Cisco Nexus 3548 Switch

CUCM 10 Self Provisioning Problem with TAGs on Universal Device Template

Hi friends.
I've been provisioning IP Phone by Self Povisioning. The phones were provisioned almost perfectly. I notice the TAGs that i filed up on Device Template (look above), are not "translated" on Device Phone.
Universal Device Template
The Tags on Universal Line Template comes perfectly to Line Description.
Had you ever seen something like this?
Kind Regards
Fernando Penteado

Hi folks. I could identify the problem with Variable and TAG. In order to Self Provisioning works fine, we need to mark Owner User on Universal Device Template.
Look that.
Thanks

A Problem With Sorting via Applescript

Hello everyone. I have always lurked these forums and learnt many things along the way, but this is my first question, and I hope that someone can help me out. I apologise for the huge post.
I have created a spreadsheet in Numbers that I plan to use for a soccer tournament. There are 8 Groups of 4 teams in the competition, so I have set each Group up on its own sheet in order to record the results of the games. Group 1 is on Sheet 1, Group 2 is on Sheet 2 etc. These results are then fed into a second table on the each page in order to create a competition ladder for each group. So far so good, works beautifully. See image:
My next step is sorting these tables so that they form a proper "results table" with the best team on top. My wish is to sort the results table in this order:
Points
Diff
F
Although not very experienced with Applescript, I have written a script to sort all of the 8 sheets so that I don't have to do them one at a time. Unfortunately I find that every second sheet does not sort correctly, even though I am using the same instructions for each seet in my script.
See here, sheet two:
Sheet 3 sorts correctly but not sheet 4, sheet 5 is good but sheet 6 bad etc...
This is my script:
tell application "Numbers"
          tell table "Ladder1" of sheet "Group1" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder1" of sheet "Group1" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder1" of sheet "Group1" of document "Manu"
sort by column "g" direction descending
          end tell
          tell table "Ladder2" of sheet "Group2" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder2" of sheet "Group2" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder2" of sheet "Group2" of document "Manu"
sort by column "g" direction descending
          end tell
          tell table "Ladder3" of sheet "Group3" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder3" of sheet "Group3" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder3" of sheet "Group3" of document "Manu"
sort by column "g" direction descending
          end tell
          tell table "Ladder4" of sheet "Group4" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder4" of sheet "Group4" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder4" of sheet "Group4" of document "Manu"
sort by column "g" direction descending
          end tell
          tell table "Ladder5" of sheet "Group5" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder5" of sheet "Group5" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder5" of sheet "Group5" of document "Manu"
sort by column "g" direction descending
          end tell
          tell table "Ladder6" of sheet "Group6" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder6" of sheet "Group6" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder6" of sheet "Group6" of document "Manu"
sort by column "g" direction descending
          end tell
          tell table "Ladder7" of sheet "Group7" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder7" of sheet "Group7" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder7" of sheet "Group7" of document "Manu"
sort by column "g" direction descending
          end tell
          tell table "Ladder8" of sheet "Group8" of document "Manu"
sort by column "k" direction descending
          end tell
          tell table "Ladder8" of sheet "Group8" of document "Manu"
sort by column "i" direction descending
          end tell
          tell table "Ladder8" of sheet "Group8" of document "Manu"
sort by column "g" direction descending
          end tell
end tell
Can anybody see any obvious errors with the script? Any info would be greatly appreciated. Thanks!

First I would look at some items to simplify the script:
I did NOT run this.
tell application "Numbers"
          set LadderNumber to 1
          repeat 8 times
       set theLadder to "Ladder" & LadderNumber
       set theGroup to "Group" & LadderNumber
       tell table theLadder of sheet theGroup of document "Manu"
            sort by column "k" direction descending
            sort by column "i" direction descending
            sort by column "g" direction descending
                         end tell
                         set LadderNumber to (LadderNumber + 1)
          end repeat
end tell
I don't see a problem with the script. I suggest adding a dummy table to each sheet and confirming you can set a value in the dummy table from the script (maybe after manually setting the value to some default value). you can also add print dialogs at each step to see what's happening... like:
set aValue to <what ever>
display dialog "The value is: " & aValue
just some thoughts

Cisco Prime Infrastructure 1.2 synchronizaton with active directory

hi all
I have installed Cisco Prime Infrastructure 1.2 and I want to make a synchronization between the PI and the active directory
note:
I want to make that to be able to search about the users on cisco prime infrastructure using Hostname instead of serching on it using IP or MAC address.
how can I do this task ???
thanks all.
I appreciate your support.

Hi Mohamed,
Integration with AD is not supported in PI
Thanks-
Afroz
[Do rate the useful post]

Still having problems with sorting playlists

I asked these questions a couple weeks ago with no response.
1. I am trying to create a playlist using the latest version of ITunes that is similar to the Today's Hit Music playlist I set up earlier this summer. The 90s music playlist that came with ITunes and this playlist work fine. However, any new playlists created since the upgrade to ITunes 11 do not. In the above scenario where I set up a playlist that only has one rule and that rule is year is greater than whatever, ITunes refuses to sort the playlist by year then by artist, instead sorting the entire playlist by artist. My Today's Hit Music playlist, on the other hand, sorts with the year on top, so every song that I have allowed in the playlist is sorted by year. For example, B.O.B, Pitbull, Taio Cruz and Usher have songs from 2010 in the playlist. Their songs are all sorted alphabetically by artist, then by album as they should be. Then Pitbull, New Boys, and Hot Chelle Ray all have songs from 2011. Under the old system, these would be right below the songs from 2010, but in the new system they are mixed in with the 2010 songs, so Pitbull could have 2 songs back to back that did not come out in the same year. How can I fix this?
2. I have a playlist set up for songs that are not in any other playlist. I had to recreate this playlist the last time I reset my plays because my phone wouldn't remove the songs that were added to the playlist since its creation from the list when it was supposed to. Now however, I am having the same problem with it as I was having with the last playlist. With the old system before ITunes 11, if What I Want by Daudtrey was the first song in that playlist, it would always be the first song, creating a sound that sounded like it was on shuffle, which I thought was cool. Now, it just sorts alphabetically by artist regardless of when it was played. How can I tell ITunes to not rearrange this playlist and just add all new songs to the end?

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

Problems with iMessage across mobile devices

My wife and I both have iOS 5 on our iPhone 4's, and I have iOS 5 on my iPad 2 as well. I receive her messages from her phone on both my iPhone and my iPad, but my iPad won't let me reply: the Send button is blue, but the word "Send" stays grey, and won't function. Obviously it is receiving messages just fine, so I have something right in the settings, but why can't I send a message? It doesn't matter whether I am in my home wi-fii, or running across 3G- it won't work either way. Please help!

I am having huge problems with imessage. I go to send an imessage and the sending bar at the top gets to around 90% and then just stops. It takes around 10 minutes before it finally says fails. Often you dont even realise it has failed as it says it has sent, yet when you check your phone there is a red dot against it. This is a huge problem both in and out of wifi areas. My phone is usless when trying to text my wife who also has an iphone 4s as it only sends an imessage around 50% of the times I Try.

PRIME Infrastructure OVA co-residency with CUCM on UCS

Hallo All.
Has anyone installed the PRIME Infrastructure OVA alongside CUCM on a UCS?
I've been looking at this document
http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines but it is vague on PRIME Infra.
Also, the CUCM I am installing alongside is v8.5
Any thoughts?
Cheers
David

The PI documentation is lagging a bit - the only requirements for the current release are what's in the Quick Start Guide here.
There is no requirement for dedicated cores. As long as your VM meets the hardware specification of the QSG, your installation should be OK. (Of course, it doesn't hurt to provide more than the minimum requirements.)

Problems with "No Audio Output device is installed"

ok one day i turned my computer on and i noticed a little red X on my volume mixer... when i open the audio mixer says "no devices are installed"
i have tried many soultions none worked ill post everything ive done
- enabled/disabled device in device manager -uninstalled/installed device in device manager
- ran scans for updates - tried to update hardware - reset bios to defult options/set on board audio to enabled
- ran recovery manager to reinstall the audio driver - went on realtek website to download the drivers after restart still nothing
nothing worked for me and i really want sound the best ive done was in the sound/aduio controller in device manager i made Realtek high definition audio device to show up but it has a yellow exclamation symobl on it saying (code 10) unable to start
i have m8000n desktop computer and i'm sure realtek was my audio sofware please help!

Hi,
needhelp11 wrote:
ok thanks for responding
i downloaded the sound driver, went to add hardware the choosed the driver i downloaded then rebooted, still nothing,
i looked in device manager under sound,video and game controllers 'Realtek High Defintion Audio' still had yellow exclamtion mark,code 10, then i tried to update the driver it crashed my computer, i had to restore to 15 mins back before i downloaded the driver
Why did you ""reboot"?
Did you mean to say restarted per the request of the software installation at completion of the install?
Ensure that the onboard HD audio device is enabled in the BIOS.
Go to the control panel-->Device Manager and right click the realtek audio device (which has the yellow exclamation point) and uninstall it.
Now right-click any device in the device manager and select "Scan for hardware changes".
If windows now finds the device and asks to install drivers do not permit it to happen. Just cancel it.
Install the full featured driver software package that you downloaded from HP.
If the install goes completely to the finished state go to Control Panel -->Audio and check to see if the Realtek HD Audio device and the Speaker is not grayed out. Now look at the image in my previous post. select speakers as the output and test them. You can plug in a headset and select that as a test as well.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Prime Infrastructure 2.1 problem with sorting devices in device groups

Similar Messages

Maybe you are looking for