Prime Infrastructure 2.1 Report for Interface utilization

Hi Forum,
since we have prime in our environment, we have some problem to take the report especially for utilization. they only show a minimal information for reporting. (percentages of utilization)
is there we can show like this? on my attachment.
if there anyone have same issues and solved, please help.

hey
i just stumbled over in PI 2.2 Dashboard -> performance -> interface
it is only showing pct of bandwidth usage but it show if the link is used up
regard

Similar Messages

Prime Infrastructure 2.1: Report - Device - Inventory

Hi there,
we want to have an inventory report of your device database.
The infrastructure is a wild mix of Catalyst 6500er, 3560X, 3750X, N7K, N5K, WLC, etc.
We are using the prime infrastructure 2.1 Report Launch Pad and the API site. The maximum we get of a N7K:
UDI serial number
FAN serial number
The whole Module serials numbers are missing. How do we get this data?
br,
chris

Hi,
here is an update:
There are more than one Report you need to start to get data for Device, FAN, Power Supply, Module - look at these reports:
Report > Report Launch Pad > Device > Inventory
Report > Report Lauch Pad > Device > Wired Detailed Device Inventory
Report > Report Lauch Pad > Device > Wired Module Detail > Wired Module Detail Report Details
SFPs and GBICs cannot be reported til now - there are working on it.
br,
chris

Customizing performance threshold for interface utilization in LMS 4.0

Am running LMS 4.0, i want to customize performance threshold for interface utilization from the default 40% to x%, please help.

Based on your other post, I think you're talking about Device Fault management. You can go to Monitor > Fault Settings > Setup > Threshold Settings, and select the DFM > System Defined Groups > Interface and the interface type you want, then edit the thresholds for this group. Change the default utilization threshold from 40% to your desired value. Save your changes, then go to Monitor > Fault Settings > Setup > Apple Changes to apply them.

Export / Reports for STS utilization on Span's between 15454 nodes

So...
I'm looking for a convenient way to keep track of my STS allocation by running reports for our customer circuits, between our various SONET 15454 and 15310 nodes. Ideally, I'd like to be able to tell CTC or CTM to generate a report which shows me how much (and which ones) STS-1's I'm using between various nodes, in a nice concise format; to help me plan for capacity, circuit rolls, and expansion. The report should also include things like % of a particular OC-48 or or OC-192 is used, available, outline of contiguous and non-contiguous STS's, and summary for all my point-to-point circuits utilization.
Currently what I have to do is:
1) Export from circuit-view (in CSV format) for each span, a seperate exported
file or each span, one by one (hoping not to overlook one)
2) Reconcile each Exported file against a spreadsheet that I maintain/update
(about once a week) updating the stats for each span
This way, I "hopefully" have a living document, updated with what bandwidth I have where (and for who), which I can reference in a consolidated way for my entire 15454 network. This greatly simplify's my capacity planing, rolls, and generally just keeping tabs on what and who I have assigned where.
It seem like there should be a simple "Generate Report" feature either whithin CTC or CTM. I should be able to customize it as I want.
Perhaps there is 3rd party software to inject into CTM which will extract such a report.
For all you 15454 guys and gals out there, please help if you know of a solution!!
--Scott

So...
I'm looking for a convenient way to keep track of my STS allocation by running reports for our customer circuits, between our various SONET 15454 and 15310 nodes. Ideally, I'd like to be able to tell CTC or CTM to generate a report which shows me how much (and which ones) STS-1's I'm using between various nodes, in a nice concise format; to help me plan for capacity, circuit rolls, and expansion. The report should also include things like % of a particular OC-48 or or OC-192 is used, available, outline of contiguous and non-contiguous STS's, and summary for all my point-to-point circuits utilization.
Currently what I have to do is:
1) Export from circuit-view (in CSV format) for each span, a seperate exported
file or each span, one by one (hoping not to overlook one)
2) Reconcile each Exported file against a spreadsheet that I maintain/update
(about once a week) updating the stats for each span
This way, I "hopefully" have a living document, updated with what bandwidth I have where (and for who), which I can reference in a consolidated way for my entire 15454 network. This greatly simplify's my capacity planing, rolls, and generally just keeping tabs on what and who I have assigned where.
It seem like there should be a simple "Generate Report" feature either whithin CTC or CTM. I should be able to customize it as I want.
Perhaps there is 3rd party software to inject into CTM which will extract such a report.
For all you 15454 guys and gals out there, please help if you know of a solution!!
--Scott

CISCO PRIME INFRASTRUCTURE NETFLOW TRAFFIC REPORT

Hi,
I have a report from cisco prime infrastructure, that I don´t know how to interpret, because the fields in the report I don´t know what´s mean them, the difference between them, what are optimal values, the worse values, etc.
Can someone help me with this
The name of the report is: FLEX NETFLOW TRAFFIC TQPQ
The fields that I don´t know what are:

hello,
I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

Prime Inf. 1.4 looking to generate custom reports for int utilization

I am polling my router interface and I am looking for a way to create a report that shows stats over a period of time on defined time intervals. I only see a report showing the top util in a time frame. Are there any ways to get reports? Tks!

If you want integrate BI Publisher with Enterprise Manager, take a look at this doc for the integration steps: Integrating BI Publisher with Enterprise Manager
and this doc: Developing BI Publisher Reports on how to develop the reports.
This chapter on Using Management Repository Views can be used as a reference to the EM repository view in case you have a stand-alone OBIEE installation and want to create your own reports there instead.

Cisco Prime Infrastructure 1.3 - reports

Hi all,
I am curious if anybody can help me with Cisco Prime reports. What I want to do is to create report of all my devices which will have information such as hostname, IP adress, . . . , an serial number. I found this task almost inpossible... When I look at the device work center tab and click on one of my devices I can see alll of the information I want (so good so far all infromation are available..but..)When I want to create such a report from all of devices in report section I pick up Detail Device Inventory and customize report which I want. Problem appears after report is done. The main ifnormation such as hostname, location an IP adress are in the first part of report and in the second part there are chassis information with serial number and other fields. But these two parts of report dont have any common field so it is impossible for me to match serial number to hostname..So if I dont want to click on every device in device work center and write down all of information I dont know how to do such a simple task...
I hope someone is able to follow my thoughts
Thanks for any answer
Martin

Robert-
If you create a separate service rule, you can have it fork TACACS authentication requests from that specific IP to a different Service identity and authorization process, where you can tell it to select a specific shell profile. Then all you have to do is create a separate shell profile for managing Prime and have that one selected. We do this with our UCS dvices, regular router/switch CLI logins, etc.
So for example:
UCS: TACACS request --> if match service selection rule "from UCS devices", go to UCS admin access policy --> if match ucs admin identiy reqirements, give UCS admin shell profile
PI: TACACS request --> if match service selection rule "from PI devices", go to PI admin access policy --> if match PI admin identiy reqirements (which are same as UCS), give PI admin shell profile
Default: TACACS request --> if match tacacs protocol from our IP range, go to default device admin policy --> if match defaul identy requirements, give default admin shell profile

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

We are running Prime Infrastructure 1.3 primarily for wireless management at this point. We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out. While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features. For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers. I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment. Does anyone know when it's officially being released? Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are? I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management. Any useful information or links would be appreciated.
Thanks,
Christian

PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
For what does it have for customers?
> As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
-Thanks

Nexus 3548 6.0(2)A1(1) within Prime Infrastructure 2.0

Hi there,
I am trying to introduce some Nexus 3548 in my Prime Infrastructure 2.0.
For my 3048 running 6.0(2)U1(1a), no problem, they are discovered well and showing no error in the Device Work Center.
My 3548 are unrecognised (NXOS 6 too).
Is this an expected bahaviour ?
Regards,
Fred

Hello,
Take a thorough look at realease notes for this version and before. This is the only way.
If your doubt is only about VPC and FEX features, it is totally supported, just be aware that upgrade is disruptive.
Regards.
Richard

Prime Infrastructure (2.0) utilization report on port group possible?

Hello
I want to create an interface utilization report for a specific port group in PI, but can't see how to do that in the report setting. You only seem to be able to select a specific device or site rather than port group. Is it possible? Also, is it possible to put that on a dashlet?
thanks for your help

Thanks for that Mahavir
Yes, I worked that out a little while ago, and can now see interface utilization by port group on the Performance > Network Interface page. I do have another question however (well two)....
I wanted to add graph over time for the utilization to the detail dashboard, but nothing shows up, even though I see the utilization in the network interface page, so I'm sure the monitoring is deployed. Why is the data missing from the graphs?
Also, I wanted to see interface packets per second graphs, but see that is not part of any default template, so I created a customer SNMP template from the IF-MIB to do this, but I can only deploy that against sites/devices or a list of interfaces, and not port groups. Why can't I deploy a customer SNMP template against a port group?
thanks for your help

AP Reported channel utilization in Prime does not match reported channel utilization in Spectrum Expert

Hello
I have a fairly dense Wireless network with an Accesspoint per room. The 3502 models are connected to WiSM with Software 7.0.240.0 and are managed with Prime Infrastructure 2.2 (the issue was also in older PI versions).
PI reports on the 802.11b/g/n interface a channel utilization of 32% with a RX and TX utilization of 0% (no clients are connected to this AP). If I open this AP now in Spectrum Expert (thanks to CleanAir), I have a channel utilization of less than 5%, no interference power at all. Also the Swept Spectrometer is only showing signal with less than -85dbi (with a few very rare higher powered specks).
So which value is now correct, or do they show something different?
Thanks,
Patrick

This is very important to understand. I should actually do a blog post on the subjey, it comes up often.
Think like a wifi radio. You can only do 3 things: send, receive, listen. And you can only do one of these at a time. While in listen mode, you hear other traffic on your channel within range. In send mode you tx data on the channel. In receive mode you Rx data on the channel. Based on these functions. You as an AP can determine how often the medium (channel) is busy or not.
Lets go a bit deeper. Before a frame is sent a preamble is triggered to sync all clients on the channel. These client do not know yet if the frame is for them or not. Then the phy header comes telling clients how lomg/time the frame will take to send. Then the actual frame gets punched and all the clients receive it. The client brimg it up from the PMD layer to the data layer. Look at the Mac address and if its for them they process the frame. If it's not for them they drop it. But before they drop it they peek at the Nav timer in the duration / ID field and back off again. This time for the SIFS and ACK. This busy time calculates the number you are seeing .. Better ?
I normally dont don't worry about channel utilization till 40% under load. If you are at 40 without load I bet you habe 1 PHY mandatory .. Do you ?

What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN

Prime Infrastructure 2.1 Client Statistic Report Issues

Hello Community,
I hope you can help with a couple of issues I am seeing on Prime Infrastructure 2.1, running an evaluation 60 day license.
My PI 2.1 build is currently managing a WLC 5508 running 7.4.121.0, which has been added successfully. No configuration changes were applied to the WLCs, other than SNMP community. No AVC or medianet configuration is applied.
When looking in the 'Operate>Client and Users' dashboard; I can see connected clients and if I select one of them, I can see further details like session, security and client statistics (showing traffic and 802.11 metrics). These are the table views that show current values, however, further down I see graphs but they do not contain any information for RSSI, SNR or traffic sent & received (packets or bytes).
Question: Should I see this information under an evaluation license and if so, what could be stopping it?
Also, when I run the reports 'Report>Report Launch Pad' and select 'Client>Client Traffic' or 'Client>Client Throughput' the resulting report contains 0 bps, when I select 'Report By' AP by Floor Area. I have created a single floor area and placed three access points into it.
Out of interest if I do a report of the same type using 'Report By' All or AP by Controller, I do see traffic graphs for 3 out of 333 access points. Just not the access points that are in my floor area. Also the amount of traffic utilization is tiny (less than a kbps) for a WLC with 800 users.
For a 'Client>Client Count' report using AP by Floor Area, I do see the client numbers connected to the WLC/APs in my configured floor area.
Question: Should I see reports for client traffic and throughput under an evaluation license for floor areas and if so, what could be stopping it?
I have checked the background task and the 'Client Statistics' task is enabled and run time is being updated.
Kind regards,
Ian

Hi,
here is an update:
There are more than one Report you need to start to get data for Device, FAN, Power Supply, Module - look at these reports:
Report > Report Launch Pad > Device > Inventory
Report > Report Lauch Pad > Device > Wired Detailed Device Inventory
Report > Report Lauch Pad > Device > Wired Module Detail > Wired Module Detail Report Details
SFPs and GBICs cannot be reported til now - there are working on it.
br,
chris

Prime Infrastructure Device and Interface Health Collection Settings

Hello,
i am evaluating Prime Infrastructure 1.2, so far i have added two devices. A router 2911 and an Catalyst 3560x, but for both devices i don't get any graphs for memory, cpu or interface utilization.
I tried to enable Administration > System Settings > Monitoring Settings Auto Monitoring but the changes are not saved even i nice status message on the bottom right corner.
after a refresh it's like before.
I have an NCS as well and there i have in the background tasks Switch CPU and Memory Poll as well as Switch Interface Utilization Poll. In the Prime Infrastructure i don't have them at all. According to the Configuration Guide there should be a CAT Switch CPU and Memory Poll and a CAT Switch Interface Poll Task, but there is nothing.
Here the Screenshot from NCS
and here from Prime Infrastructure

Alex, Suwa
You can still monitor interfaces with the following workaround (which works for me):
Under Design > Monitoring Configuration:
From the tree on the left, expand Features > Interface Health
If needed, select the interface parameters to poll and the polling intervals, provide a name to your template and then click "Save as new template"
Under Deploy > Monitoring Deployment:
Locate your template and click the green "Deploy" button
Select which devices you want to poll, or just select a group like "Routers", Switches etc.
That should do the trick and information should show up after few minutes.
Hope it helps,
Tomer
BTW- you can also perform the same for device health, by using "Device Health" Metrics template under "Design".

Prime Infrastructure 2.1 Report for Interface utilization

Similar Messages

Maybe you are looking for