Prime InfraStructure 2.2 - Support of Nexus 3524 model

Hello Community,
I am trying to find but I am not sure if Nexus 3524 is supported on Cisco Prime Infrastructure 2.2
Please can someone clarify?
thanks in advance,
G

Hi ,
Cisco Nexus 3548 Switch    OID:1.3.6.1.4.1.9.12.3.1.3.1238        (NX-OS\(tm\)), IOS
yes , it is supported , you can check the below link::
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
Thanks-
Afroz
**Ratings Encourages Contributors ****

Similar Messages

  • Does Prime Infrastructure 2.0 support 7.5 code?

    I am currently running PI 1.3 and plan on upgrading to PI 2.0. Are 5508 Wireless Controllers 7.5 and MSE 7.5 code supported in release PI 2.0?

    PI 2.0 was really intended for the converged access, but it will also support v7.5 and PI1.4 supported v7.5.
    Management Support for WLC Release 7.5
    Prime Infrastructure 1.4 provides management support for WLC Release 7.5 and associated features. In addition, this release provides support for AP platforms such as 3600P and 802.11ac module.
    For more information about Cisco Unified Wireless Network (CUWN) Software Release 7.5, see the product bulletin at the following URL:
    http://www.cisco.com/en/US/products/hw/modules/ps2797/prod_bulletins_list.html
    For more information about the features of WLC Release 7.5, read the Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 7.5 available at the following URL:
    http://www.cisco.com/en/US/products/ps10315/prod_release_notes_list.html

  • Is cisco prime infrastructure 1.2 support topology auto-discovery ?

         Is anyone konw it ?
         Thanks!

    PI (any version) does not yet have the Topology tool.
    It didn't get done and won't be included until sometime after 2.0 is released in June.

  • Cisco Prime Infrastructure 2.2 Supported Language

    Hi Team,
    We have deployed PI 2.2 into one of the client where they want Cisco PI in French Language, so all coming alarm, events, setting, etc will be display in French.
    It's would be much appreciate if someone from PI expert will guide us how we can achieve this?
    Thanks,
    Vishal

    Vishal, please close this thread/Mark this as answered to close, in case there are no more follow up questions. 
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them**

  • Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?

    I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs? 

    The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
    Interestingly, Prime LMS does support both the 6001 and 6004. Reference.

  • Cisco Prime Infrastructure 2.2 UCS support (C24)

    Hi,
    I recently upgraded a CPI 2.1 server to 2.2 hoping that it would support monitoring and managing a customer's C24 server. Unfortunately I hadn't read the Supported Devices list (http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html) where it is stated that UCS C220 M3 and C240 M3 are supported, but none of the other models.
    When can I expect support for C24 M3 (OID:1.3.6.1.4.1.9.1.1685) and the other UCS models?
    Mikael

    Cisco just added the Compute work center and UCS support in PI 2.2. I suspect they used the C220 as a first target since that's the platform for the upcoming hardware appliance refresh.
    While they haven't announced future release plans, typically we see incremental device updates via the update packages - those have been coming out almost monthly with PI 2.1.
    I'd encourage you to submit enhancement requests via your Cisco account team if the feature is important to you. Customer feedback is one of the key elements in deciding what features the developers focus on.

  • Cisco Prime Infrastructure 2.2 - Network Topology error

    He dears,
    My Customer has installed over UCS Cisco Prime Infrastructure 2.2.
    The network is composed with Switches nexus 93962-px and 2960x. All devices were discovered and inventoried successfully.
    The problems is that Network Topology is not showing the connections between devices. Some devices connections are showed (partially) and another not.
    We've already checked that CDP is run and working fine on all of switches.
    I appreciate your help!
    Tks,
    Regis

    I'm sorry to say that but Prime Infrastructure does not support IP SLA functionality similar to Cisco Prime LMS:
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
    It's in the developer's plans but there's no schedule yet for this feature.
    It's possible to manually configure IP SLA on the device and then define Custom SNMP templates in Prime Infrastructure and poll whatever information you might consider relevant.
    This isn't user friendly (exact OID needs to be typed manually) and is a bit quite complicated, though.
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • Monitoring ASA in Cisco Prime infrastructure 2.2

    Hi everybody.  I have some issue with cisco Prime Infrastructure  2.2.  We use this product in our network for monitoring network devices and I need to monitor also our ASA 5550 device with soft 8.4.  I  added ASA to Cisco PI but see only basic component like my device can reachable via  and read via snmp. But cannot see  CPU, RAM, Device ENV like Temperature, l2l vpn connection,  Interfaces status and Utilization that interfaces, cannot see sub interface that placed on ASA like that g0/0.20.  I need fully monitor ASA and See logs and trap for my device:
    CPU RAM ENV (Temperature), Interface and sub interface status, L2L VPN  Status.
    1 Cisco Prime infrastructure can full support  ASA for monitoring and logging.. IF YES how can i configure  that features in Cisco PI 2.2 for ASA
    2 IF not which product Can full support that features for full monitoring and logging  ASA devices
    I have a little deadline for finishing
    thanks everybody before

    I've not success monitoring ASA interface utilization either. I'm using PI 2.2 with device update #1. The ASA is a 5585-X with 9.2(3) software.
    I have deployed the PI monitoring template to the ASA and do see its overall status and PI has enumerated the interfaces in the device page.
    I even looked at a packet capture and see PI querying the values of the interface counters and those values being sent back to PI - yet I cannot select any ASA interface when drilling down under Performance Detail monitoring.
    When I get some free time I will open a TAC case on it, meanwhile I am getting all the info I need from the upstream and downstream switches.

  • Cisco Prime Infrastructure, Express, licensing

    Are there any funcionatility limitation between each edition of the Cisco Prime Infrastructure other than supported number of devices?
    Does it support turning APs on and off on a predefined scheduled?
    I read in the manual "Cisco Prime Infrastructure Classic View Configuration Guide for Wireless Devices" that it is possible to Managing WLAN Status Schedules.  Does it require the assurance license feature set or will lifecycle license will be sufficient?

    I believe you could create a scheduled Lightweight AP Configuration Template job and have it simply turn off the radios on the selected APs. Make it recurring (every night at a certain time) and add a complementary recurring job to turn the radios back on at the desired time.
    See the following screeenshot from PI 2.0 (click to enlarge):

  • User Tracking supported for Nexus 5K in Prime Infrastructure 1.3

    Hi,
    Is User Tracking supported for Nexus 5K in Prime Infrastructure 1.3?
    Regards
    Francois Bouchard

    Hi Andy,
    Check the below link , as per this Doc .. User tracking is supported in 2.0:
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
    Thanks-
    Afroz
    [Do rate the usefu post]

  • Prime infrastructure nexus 5600 unknown device ?

    Hi All
    Just upgraded prime infrastructure to ver 2.2 but we have a few issues
    One of them is it sees our Nexus 6572 s as unknown devices .
    While trying to deal with another issue with our support we upgraded
    all the newest patches but still this come up as an unknown device.
    Surely cisco have a device patch or something for this
    As i have learnt prime from using it and havent done any training
    perhaps there is something i should know
    Kind regards
    Steve

    Ignore this one just uploaded the latest device patch and this now works
    Steve

  • Prime Infrastructure 2.2 with Nexus 5672UP

    Hi
    I was wondering if anyone have managed to add Nexus 5672UP devices in Prime Infrastructure 2.2?
    I noticed that it is not in the device supported list of 2.2.
    I did however notice that the device is supported with Update Pack 7 in PI 2.1
    Was wondering if one could load Update Pack 7 for PI 2.1 for PI 2.2 or if there is an update pack for PI 2.2 that includes this device?

    Hi ,
    Device Type: Nexus 5672UP
    SYSOID: 1.3.6.1.4.1.9.12.3.1.3.1410
    This device will be supported by first or second week of Feb.
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Nexus 3548 6.0(2)A1(1) within Prime Infrastructure 2.0

    Hi there,
    I am trying to introduce some Nexus 3548 in my Prime Infrastructure 2.0.
    For my 3048 running 6.0(2)U1(1a), no problem, they are discovered well and showing no error in the Device Work Center.
    My 3548 are unrecognised (NXOS 6 too).
    Is this an expected bahaviour ?
    Regards,
    Fred

    Hello,
    Take a thorough look at realease notes for this version and before. This is the only way.
    If your doubt is only about VPC and FEX features, it is totally supported, just be aware that upgrade is disruptive.
    Regards.
    Richard

  • Cisco Prime Infrastructure not detecting Nexus VLANs

    Hello,
    we recently added 2 Nexus 5010 to our prime Infrastructure 2.0.
    Once synchronization is completed, the device shows as Managed.
    When looking through the device details, everything seems to be ok, just when looking into the VLANs tab, it says:
    "none detected".
    In fact, there are quite a lot of vlans on this device.
    Did anyone have a similar problem?
    Thanks,
    Jörg

    Hi Jorg,
    I have checked and confirmed that Unfortunately  this feature is not supported  for NEXUS . I mean the VLAN information.
    and I think "port-channels" are also not supported.
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Prime Infrastructure/ Assurance is  positioned today more towards managing network elements and network performance,  rather than server infrastructure. We are in the process of adding Datacenter  component support, with more focus on Nexus and UCS- due later this  year.
    Having said that, Prime Infrastructure allows the system user to  add custom SNMP polling templates, which can then be used for polling any SNMP  based values from any SNMP enabled device. These can be used to collect the  information you specified below and the polled information will be available in  dashboards and reports.

Maybe you are looking for

  • RE: Unable to set up new iCloud account.

    When I tried to set up an account, a screen popped up saying, "Due to high demand, icloud is not available for new users.  Try again later."  Is this a temporary thing? 

  • Corrupt image

    What does corrupt image mean on download

  • Java/Excel interface

    Hello everybody!! I am doing an MSc Dissertation at the moment and was wondering if anyone could tell me how to get a tab delimited text file and use Java to create it in to an Excel spreadsheet format? This new spreadsheet will then need to be modif

  • Release Java Application with DB & Tables

    Hello all, I searched for a long time but cannot really find an answer to my question. I want to create a desktop application and within this application I want to use a database for some data management. Later I want to be able to start my applicati

  • How to deploy Hooks

    Hello, If i implement my code in say PreproccessorHook where should I put the class file and/or how should I set the classpath so that the Hook is invoked for each service. Which property file should I change for the same. Please help. Regards Gourij