Prime Infrastructure 2 - access denied in place of login screen

Hello,
After login into our CPI2 we will now get into "Access is denied to NCS" immediatley and very quickly instead of the expected login screen.
Running ncs status from console shows everything should be OK. I stopped and started CPI again, but no improvement.
But why we cant use the CPI not anymore. How we could troubleshoot the cause? What can we do?
thx for hints in advance, Steffen

Hallo Bastian,
I think you still have browser issue, Using IE is still the best with Prime.
I have exactly same prime 2.2 and installed fixes/software/device packs.
I have no problem I can see all views. I use now IE 11, with Chrome 42.0.2311.90 and firefox 37.01 I have problems too with lots of views. You have not tell what browser + version you have.
Since you have same prime 2.2 as me. I have other problems, can you check yours?
Can you see a functional CLI template page at Configuration > Templates > Features & Technologies:
https://supportforums.cisco.com/discussion/12481691/can-cisco-prime-22-still-do-simple-ad-hoc-deployment-job-cli-over-all-switches
Do you have SNMP Connectivity Failed while Verify Credentials has no errors all green and checked.
https://supportforums.cisco.com/discussion/12494786/snmp-request-exceeds-internal-data-buffer-512-bytes-prime-22-asa-5545

Similar Messages

IIS Server 7.5 403 Forbidden Access Denied Error after submitting login Page

Hi All,
Need help to resolve below error:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
Getting this error once hitting submit button, here i am entering only user name it should give an alert msg asking for the password.
The application is running on IIS server 7.5 and recently enabled Anonymous Authentication and since then it is giving this error.
But if i am accessing the application locally it means in server machine it is working but from remote system it gives 403 error.
Regards,
Kirti

Hi,
it's difficult to say what exactly is causing without more info on you confiuration.
I'm, from you description, assuming a webpage that was configured for forms authentication. You enabled anonymous authentication and now it no longer works.
Forms authentication relies on webpage logic. In most cases, you cannot replace it 'like that' by another authentication method as the login page contains logic on how to store the usercredentials and/or authorization and were to go after authentication
has finished.
Anonymous authentication relies on the application pool identitiy (or the anonymous user) having RX access to the content. Depending the configurations you made when enabling anonyous authentication, you might aditionnaly need to assign an identity
to the anonymous user and configure ntfs privilges on the content.
Check IIS logs and event logs for information. if you do not succeed to resolve, I would suggets to post on teh iis.net forums and include detailed configuration information.
MCP/MCSA/MCTS/MCITP

SharePoint 2013 - Issue while making URL public. Access denied error for SP.Debug.js and get_effectiveBasePermissions error .

Hi,
Our feature code working fine in SP2013 dev environment, but when we have deployed in test environment where URL is public,
it is giving below error.
• “get_effectiveBasePermissions : object is null or undefined”- in sp.ui.exportasscoiatedrelateddocs.js from Infrastructure feature
• “Access Denied” – in SP.Debug.js file
• “Unable to get value of the property 'toString': object is null or undefined”- in SP.Debug.js file
Your help will be appreciated.
Regards,
Divyesh Lappawala

Difficult to guess what's the real problem just seeing the screenshot. But can you check if you are requesting the script files from correct location? Sometimes maybe you are looking script from different site collection/url. Also is there's any possibility
that users are browsing as anonymous or maybe the requires sharepoint scripts are not loaded beforehand.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Prime Infrastructure Demo License

If I apply the Demo license to a licensed Prime Infrastructure server will it enable all the features so I can test the Netflow features for the demo period? I have never used the Netflow features and would like to test drive for a little and decide if we want to move of our current platform.
Thank you all.

You purchase licenses to access the Prime Infrastructure features required to manage your network. Each license also controls the number of devices you can manage using those features.
You need a base license and the corresponding feature licenses (such as Assurance or Data Center licenses) to get full access to the respective Prime Infrastructure features to manage a set number of devices.
If you have installed Prime Infrastructure for the first time you may access the lifecycle and assurance features using the built-in evaluation license that is available by default. The default evaluation license is valid for 60 days for 100 devices. You can send a request to [email protected] if:
You need to extend the evaluation period
You need to increase the device count
You already have a particular feature license and need to evaluate the other feature licenses
To troubleshoot licenses, you will need to get details about the licenses that are installed on your system. Click Help > About Prime Infrastructure to access your license information.When troubleshooting licenses, it is important to remember that Prime Infrastructure has five types of licenses:
Base: Required for every Prime Infrastructure installation. The requirement stems primarily from the need to do accurate royalty accounting by knowing how many Prime Infrastructure instances have been purchased. A Base license is required for each instance of Prime Infrastructure, and is a prerequisite for all other license types.
Lifecycle: Regulates the total number of devices under Prime Infrastructure management.
Assurance: Regulates the total number of NetFlow devices under Prime Infrastructure management.
Collector: Regulates the total number of NetFlow data flows per second that Prime Infrastructure can process.
Data Center: Regulates the total number of data-center devices under Prime Infrastructure management.This license type was introduced in Prime Infrastructure version 2.2.
All five types of licenses are supplied as either evaluation or permanent licenses:
Evaluation: These licenses permit or extend access to Prime Infrastructure for a pre-set period. You can apply only one evaluation license of each type (that is, only one Lifecycle evaluation license, one Assurance evaluation license, and so on). You cannot apply an evaluation license over a permanent form of the same license.
Permanent License: These permit access to Prime Infrastructure features as specified and are not time-limited. Permanent licenses can be applied over evaluation licenses, and can also be applied incrementally (that is, you can have multiple permanent Assurance licenses, and so on).
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/administrator/guide/PIAdminBook/licensing.html#pgfId-1055426

Access denied by Business Data Connectivity when trying to add myself to the BDC Metadata Store

Originally I was trying to create a ECT in SharePoint Designer 2010, on the production server, and every attempt fails with the error "Access denied by Business Data Connector" and I found the post "Deploying a BDC Model project to SharePoint 2010"
which suggests that I may not have rights to the BCD Metadata Store: "It seems that an account are you using to deploy solution doesn't have sufficient permission in the BDC Metadata Store."
So I tried to set myself (individual windows user) up to have rights via: "Central Administration->Application Management->Manage Service Application->Business Data Connectivity Service->Click Set Metada Store Permission
on the ribbon->Set Permission you need and tick the checkbox "Propagate permission to all"; and pressing the OK button an error dialog displays stating Access denied by Business Data Connectivity.
What should I check next?

I'm in a situation similar to MarkDavisHQ's. I was able to get the Metadata Store working by:
Making the BDC app pool identity a local administrator (before that, I was seeing lots of WcfSendRequeust like this in the logs - but I'm still not sure this escalation was necessary.   I have since removed the app pool identity from local administrators
and it ):
Starting the (SharePoint) Claims to Windows Token Service
Can anyone else confirm whether or not local admin privileges are required?
For those who may be stuck at a similar spot, here are the log excerpts that helped me.
Before I changed the local admin membership, this was appearing in the logs:
04/22/2012 15:03:26.62   w3wp.exe (0x0FFC)   0x0DF4   SharePoint Foundation   Runtime   tkau   Unexpected   Microsoft.BusinessData.Infrastructure.AccessDeniedException:
Access denied by Business Data Connectivity.    at Microsoft.SharePoint.BusinessData.SharedService.BdcServiceApplicationProxy.Execute[T](String operationName, UInt32 maxRunningTime, ExecuteDelegate`1 operation, Boolean performCanaryCheck, Boolean
isChannelThatDelegatesIdentity)     at Microsoft.SharePoint.BusinessData.SharedService.BdcServiceApplicationProxy.SetAccessControlEntries(MetadataObjectStruct metadataObjectStruct, AccessControlEntryStruct[] aces, String settingId)
at Microsoft.SharePoint.BusinessData.Infrastructure.BdcAccessControlList.SaveAs(MetadataObjectStruct metadataObjectStruct, String settingId, BdcServiceApplicationProxy serviceProxy)     at Microsoft.SharePoint.BusinessData.Administration.IndividuallySecurableMetadataObject.SetAccessControlList(IAccessControlList
acl, String settingId)     at Microsoft.SharePoint.ApplicationPages.ManageBDCPermissions.OkButton_Click(Object sender, EventArgs e)     at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl,
String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   c448101d-363b-4e70-bac4-3ffb0c3313dc
After I changed the membership, I hit this one (which was resolved by starting the Claims to Windows Token Service ):
04/22/2012 21:50:44.54    w3wp.exe (0x1030)    0x0CF4    SharePoint Foundation    Claims Authentication    bz7l    Medium    SPSecurityContext.WindowsIdentity:
Could not retrieve a valid windows identity for NTName='XYZDEV1\e-hugh.kelley', UPN='[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.EndpointNotFoundException: There was no endpoint listening
at net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.IO.PipeException: The pipe endpoint
'net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2' could not be found on your local machine.      --- End of inner exception stack trace ---    Server stack trace:      at System.ServiceModel.Channels.PipeConnectionInitiator.GetPipeName(Uri
uri)     at System.ServiceModel.Channels.NamedPipeConnectionPoolRegistry.NamedPipeConnectionPool.GetPoolKey(EndpointAddress address, Uri via)     at System.ServiceModel.Channels.CommunicationPool`2.TakeConnection(EndpointAddress
address, Uri via, TimeSpan timeout, TKey& key)     at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan
timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan
timeout)     at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)     at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String
upn, Int32 pid)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2
contractOperation)     at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity().    090b18ec-3a6f-4367-a74b-b6a113a62507
04/22/2012 21:50:44.54    w3wp.exe (0x1030)    0x0CF4    SharePoint Foundation    Claims Authentication    g220    Unexpected    No windows identity
for xyzdev1\e-hugh.kelley.    090b18ec-3a6f-4367-a74b-b6a113a62507

Access Denied Error when Installing Suitcase

I am encountering an Access Denied Error when installing Suitcase X1 on a 600 MHz G3 ibook running 10.4.3 with all updates and it gets to 2 items remaining to be installed and I get access denied error and then another screen pops up and says "You do not have enough access privileges for this installation". I am logged in as an administrator, I tried creating a new Administrator account, I have repaired permissions, I have tried downloading a new file, all with no luck and now I am stuck. Any ideas?
G3 Pismo, G4 Desktop Mac OS X (10.4.3)

Hi,
Firstly, please let us know if it is a workgroup or domain environment.
Also, please let us know more details about the configurations of the server and clients.
Meanwhile, you can check the settings by referring to the following:
Allow someone to connect to your computer using Remote Desktop Connection
http://windows.microsoft.com/en-HK/windows7/allow-someone-to-connect-to-your-computer-using-remote-desktop-connection
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-hk/windows/remote-desktop-connection-faq#1TC=windows-8
If issue persists, please provide us the unedited error message or screenshot for further research.
Thanks.
Jeremy Wu
TechNet Community Support

Using Windows Network Policy Server to authenticate Prime Infrastructure 1.4 admin access

I am using Prime Infrastructure 1.4 and I am needing to set up RADIUS Authencation. I am using Microsoft Network Policy Server. I have done all of the setup on both systems. I have matched up the settings the best I can on both systems. I am trying to use CHAP. I keep getting username or passwrod is not valid. In a effort to test I changed the Authentication type to PAP (I do not want to use this because it is not encrypted) But in a effort of testing I changed the setting on both the NPS and on Prime. I am now able to log in. Changing back to CHAP it fails and states the Username or Password is invalid. SO, PLEASE HELP!!!!

Ok, I was able to resolve this over the weekend. The actual fix is a little complicated. You can find the full explination here: http://technologyordie.com/windows-nps-radius-authentication-of-cisco-prime-infrastructure
The basics are that Prime (1.3 is the version I am using at this point) expects two AV pairs from radius. They are as as follows:
NCS:role0=Admin
NCS:virtual-domain0=ROOT-DOMAIN
"Admin" is the name of the group you would like your users to have access at and "ROOT-DOMAIN" is the name of the domain you would like them to have access to.
For TACACS+ I suspect the AV Pairs are going to be the same but I have not been able to test that.

Using Windows Network Policy Server to authenticate Prime Infrastructure 1.2 admin access

Dear all,
How can I authenticate admin access to the Prime infrastructure 1.2 using AAA mode RADIUS with Windows Network Policy Server as RADIUS server? I find some information using ACS as RADIUS server but cannot find how to for Windows NPS.
I try to configure the NPS but an error prompted when logging in to PI using an account in the NPS server, "No authorization information found for Remote Authenticated User. Please check the correctness of the associated task(s) and Virtual Domain(s) in the remote server"
Thanks for your help.
Dennis

Ok, I was able to resolve this over the weekend. The actual fix is a little complicated. You can find the full explination here: http://technologyordie.com/windows-nps-radius-authentication-of-cisco-prime-infrastructure
The basics are that Prime (1.3 is the version I am using at this point) expects two AV pairs from radius. They are as as follows:
NCS:role0=Admin
NCS:virtual-domain0=ROOT-DOMAIN
"Admin" is the name of the group you would like your users to have access at and "ROOT-DOMAIN" is the name of the domain you would like them to have access to.
For TACACS+ I suspect the AV Pairs are going to be the same but I have not been able to test that.

Can Prime Infrastructure 2.0 enable port 8080 for Browser access?

By the offical document, port 8080 is pre-defintied for the Browser access but it is disabled by default.
I am finding a way to enable the port, but I cannot find any guide on cisco site.
Did anyone know how to enable the 8080 port?
Thanks in advance.
Louis

HIi Hoi;
As per cisco document : http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/administrator/guide/config_server_settings.html#wp1082023
Configuring Server Settings
The Server Settings page allows you to enable or disable the TFTP, FTP, HTTP, HTTPS, or Compliance Service. To turn the server settings on or off:
Step 1 Choose Administration > System Settings.
Step 2 From the left sidebar menu, choose Server Setting.
Step 3 If you want to modify the FTP and TFTP directories or the HTTP and HTTPS ports that were established during installation, enter the port number (or port number and root where required) that you want to modify and click Enable or Disable.
The changes are reflected after a restart.
I am not sure but try to change the port number 8080 in HTTP Forward option and save it, then restart it.
I think it will work.
Regards
Don't forget to rate helpful posts

Folder Redirection 502 Access Denied but redirecting to wrong place

Hi,
I have come across a very unusual problem. Folder redirection was implemented a few months ago where a number of folders were redirected with the following settings:
Redirect everyones folder to the same location
Create a folder for each user under the root path
\\server\homefolders
It has worked flawlessly but in recent weeks when we create new users, some of them experience this problem. Folder redirection fails consistently for that user with 502 Access denied. That isn't the unusual bit. This is the unusual bit
- The message is:
Failed to apply policy and redirect folder "Documents" to "\\fileserver\homefolders\joe.bloggs\Documents".
Redirection options=0x1001.
The following error occurred: "Failed to build the list of regular subdirectories under "\\fileserver\homefolders\Jane.Doe\Documents".".
Error details: "Access is denied.
Yes for some reason it knows where it should be redirecting to, but then attempts to redirect to someone elses home folder location. I've substituted the server name and user names for security but the name equivalent to Jane.Doe is consistent in every
error.
This only occurs on our RDS 2012 R2 farm, which has 3 session hosts and doesn't happen on any other system. We use roaming profiles. I have logged the user off and deleted the local and network profiles but get the same result. I've
rebuilt the GPO that handles folder redirection, but again, same result. I've checked and double checked Folder Redirection settings and nothing points to a this specific Jane.Doe user.
Anyone come across this before?

Hi,
I have come across a very unusual problem. Folder redirection was implemented a few months ago where a number of folders were redirected with the following settings:
Redirect everyones folder to the same location
Create a folder for each user under the root path
\\server\homefolders
It has worked flawlessly but in recent weeks when we create new users, some of them experience this problem. Folder redirection fails consistently for that user with 502 Access denied. That isn't the unusual bit. This is the unusual bit
- The message is:
Failed to apply policy and redirect folder "Documents" to "\\fileserver\homefolders\joe.bloggs\Documents".
Redirection options=0x1001.
The following error occurred: "Failed to build the list of regular subdirectories under "\\fileserver\homefolders\Jane.Doe\Documents".".
Error details: "Access is denied.
Yes for some reason it knows where it should be redirecting to, but then attempts to redirect to someone elses home folder location. I've substituted the server name and user names for security but the name equivalent to Jane.Doe is consistent in every
error.
This only occurs on our RDS 2012 R2 farm, which has 3 session hosts and doesn't happen on any other system. We use roaming profiles. I have logged the user off and deleted the local and network profiles but get the same result. I've
rebuilt the GPO that handles folder redirection, but again, same result. I've checked and double checked Folder Redirection settings and nothing points to a this specific Jane.Doe user.
Anyone come across this before?

Prime Infrastructure 1.3 Can't start DB.Can't use WEB interface access

Hi,
Suddently, all services at prime infrastructure 1.3 are stopped. It's working fine previously. I try to restart the ncs service also doesn't help.
here is the ncs status:
PRIME01/netsvcsdm# ncs status
Health Monitor is running, with an error.
initHealthMonitor(): can not start DB
Reporting Server is Stopped
Ftp Server is Stopped
Database server is stopped
Tftp Server is Stopped
Matlab Server is Stopped
NMS Server is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
status
PRIME01/netsvcsdm# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
start
Note: I notice that the MEM LED at light path diagnostics panel components is lit. I check at cisco documentation, it indicate memory error. is it confirmed appliance issue?
Please advice. Thank you

Thank you for the reply. sorry for late update.
1. I try to reseat the memory card, MEM LED from diagnostic panel is not lit anymore. I think it solve the memory problem initially.
2. I use the following command to refresh the database
NCS stop
NCS DB reinitdb
NCS start
After reinitdb, I can login to prime infrastructure. it seems like the system is working fine. All of the configuration is gone. So, I proceed to restore the configuration.
3. Restore configuration
When I try to restore my configuration, I have the following error.
PRIME01/netsvcsdm# restore 2013-07-24_PRIME01-130724-1853.tar.gpg repository localftp application NCS
Restore may require a restart of application services. Continue? (yes/no) [yes] ? yes
Initiating restore. Please wait...
Stage 1 of 9: Transferring backup file ...
-- complete.
Stage 2 of 9: Decrypting backup file ...
-- complete.
Stage 3 of 9: Unpacking backup file ...
--complete.
ERROR : There is the mismatch in the following configuration parameter(s) of this machine when compared to the machine where the backup was generated: DB Memory Target, RAM Size -> can’t restore the configuration due to RAM size different.
ERROR : This may affect the performance of the current machine. Hence aborting restore process.
% Application restore failed
PRIME01/netsvcsdm#
PRIME01/netsvcsdm# show inventory
NAME: "PRIME-NCS-APL-K9 chassis", DESCR: "PRIME-NCS-APL-K9 chassis"
PID: PRIME-NCS-APL-K9 , VID: V02 , SN: KQ7T4TM
Total RAM Memory: 12141876 kB -> Appliance only detect the RAM memory as 12GB. Our Appliance has 16GB memory. I suspect 1 of 4 memory was spoiled.
I notice that the prime only detect 12GB RAM instead of 16GB. There is hardware failure (1 of 4 memory is spoil). Unit have to be RMA.
Thanks,

Cisco prime infrastructure 1.3 cannot access to the user interface

Hello,
We use prime infrastructure 1.3 , and since 1 week we cannot acces to the Web UI to manage network devices.
"Health monitor server" service doesn't started correctly
#ncs status
Health Monitor is running, with an error.
failed to start NCS on startup Health Monitor
Reporting Server is running
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
thanks for your help.

PI 1.x Health Monitor is running, with an error/NMS Server is stopped
CSCuf25963
Description
Symptom:
PI cannot start completely after the re-setup with different hostname/IP address from that in the original setup.
NCS-APL-01-new/admin# ncs status
Health Monitor is running, with an error.
failed to start NCS on startup Health Monitor
Reporting Server is running
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
Conditions:
1.2.1.12
Not happen in 1.1.X or earlier
Workaround:
from the root shell,
update the file /opt/CSCOlumos/conf/messaging.properties with the correct ipaddress.
Known Affected Releases:
(2)
1.2(1.12)
1.3(0.20)

Prime Infrastructure 2.0 Assurance issue

Hi together,
I have a problem with our Prime Infrastructure 2.0 regarding the assurance features.
The appliance can only handle flows exported from our WLAN controller, but not from any wired device (neither standard netflow nor flexible netflow!).
Flows are received correctly on port 9991 on the PI appliance, I validated that via tcpdump. But the sending devices are not listed on "data sources".
Has anyone experienced the same problems, or even has a solution for the problem explained?
Regards
Sebastian

we need to have Assurance license for NAM to work with PI 2.0. have you installed that ?
Assurance License: Provides access to the Assurance feature set, which provides end-to-end network visibility of application and service performance to help ensure end-user quality of experience. The Assurance feature set also provides the ability to manage and aggregate data and views across multiple Cisco Prime Network Analysis Modules (NAMs). The Assurance license is based on the number of managed NetFlow-enabled interfaces. Assurance licenses are available in bundle sizes of 15, 50, 100, 500, 1000, and 5000 NetFlow-enabled interfaces. The 15 interface license has a restriction that allows you to manage only up to 5 NAMs, whereas the other Assurance license bundles do not place a restriction on the number of NAMs that you can manage. The 15 interface license can only be used standalone and not combined with the Lifecycle licenses. You need to purchase a 50 interface Assurance license or larger to use with other Cisco Prime Infrastructure feature licenses.
Thanks-
Afroz
[Do rate the useful post]

Prime Infrastructure 2.0 does not show Planning Mode

Hi,
I´d like to know if evaluation version of Cisco Prime Infrastructure 2.0 (PRIME-NCS-VAPL) does not provide the feature "Planning Mode" to conduct a Predictive Site Survey.
Monitor>Site Maps>Select an Site>
At the drop down list (select a command), I can´t see planning mode. The options are: New Building, New Outdoor Area, Edit Campus/Site, Delete Campus/Site, Configure Interferer Notifications.
I also notice that "Add Access Points" does not appear.
see the att image.
Tks.

Hi ,
1. Monitor > Site Maps
2. Select the appropriate location link from the list that appears.
A color-coded map appears showing placement of all installed elements (access points, clients, tags) and their relative signal strength.
CLICK on the " color-coded map "
Now on the right hand side Drop Down Menu , you should be able to see the "Planning Mode"
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Install Prime Infrastructure 1.2

Hi. Can't connect to Prime Infrastructure 1.2 from web-browser.
I installed Prime Infrastructure http://software.cisco.com/download/release.html?mdfid=284396249&flowid=34522&softwareid=284272932&release=1.2.0&relind=AVAILABLE&rellifecycle=&reltype=latest
I deployed OVA-file (around 500 Mb), but NCS is not running, and I have only NCSPNP.
From console I haven't command like "ncs start". When I see "show ports", I noticed, that server doesn't listening on port 443 and I haven't "NCS" application.
What I have to do in this case?

I kinda have the same issue, root is denied access via cli just tells me incorrect password. I found a solution but i need the full iso file, but cant really find it anywhere on Cisco's homepage.
Any help would be nice!

Prime Infrastructure 2 - access denied in place of login screen

Similar Messages

Maybe you are looking for