Prime Infrastructure: Can you export Alarms and Events?

Hello
In Prime 1.4, you had the ability to export the alarms and events you saw being reported, at least according to the PDF manual: http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-4/configuration/guide/pi_14_cg.pdf
I want to export these events and alarms that can be found in the Monitor section of Prime 2.1, but the export option does not seem to be available.
Does anyone know if it is possible to export these via a scheduled report or by looking in a particular place on Prime? I would like to import the information into Splunk to see if we can gain an insight into the information that is being collected.
thanks
Bryn

HI,
Did you ever determine an answer to this question? I really need to export data after a certain date... (I would also like to publish a calendar, after a certain date-- as no one needs to see the "old" events).
Stu

Similar Messages

  • Can you export the date and user to Excel that appears into a Comments field in a tracking list?

    Hi everyone,
    Can you export the date and user to Excel that appears into a Comments field in a tracking list?
    When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
    In the Comments field appears also, besides the comment text,  the user and date from who and when the comment is added.
    Is there a way to export also the user and the date?
    Thanks
    Wim

    create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
    updating that field with the new comments  (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
    Please refer few more links: Hope they will help
    http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
    http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
    https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
    http://community.office365.com/en-us/f/154/t/278560.aspx
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Can you export whole folders with meta data in tact

    Can you export folders or groups of photos including all the meta data eg keywords, gps etc to a new folder?
    I then could copy these to my xbox for viewing for example?
    cheers

    managed to have a bit mess, you can actually highlight an event, album, places, faces etc in the source list, the choose file > export and it does all included in that folder/album/source, rather than highlighting them individually.
    The reason for wanting to do this, is I want to be able to export to some kind of structure outside of iPhoto for my Windows PC, Xbox etc for showing, but want all the keywords, GPS, meta data on
    cheers

  • Alarm and event logging has stopped

    Alarm & Event Logging with Citadel 5 and Lookout 6.02.
    I have a continuously running application that stopped logging alarms and events approx. 6 weeks ago. (March 07, 2010) The problem went unnoticed until a recent event/alarm sequence needed to be investigated. Data traces are not a problem. They are visible using MAX as well as with Lookout hypertrends. However, MAX shows nothing for alarms or events past that date. (No problem earlier, going back to 2002)
    The Alarm panel in Lookout will show the alarms and events as they occur so I know they're being detected.
    I understand that the data traces are logged to Citadel, whereas alarms and events are passed to the MSSQL server. (In my case the free version that comes with XP - SQL Server Express I believe.)
    This version has a database size limit of 4 GB. What exactly does that mean?
    An *.mdf file >4GB cannot be created?
    An *.mdf file >4GB cannot be read?
    The total size of all *.mdf files cannot exceed 4GB?
    Curiously the file in use is 1.99GB. When archived, it is only about 750 MB, yet the total number of alarms and events are the same in each. There are other *.mdf files that exist on the system but aren't in use.
    NI document 4GPBLT21 states  "Once that limit is reached, the alarm and event data is logged to the high performance Citadel database". Then what? Is that data viewable with MAX?
    MAX doesn't appear to have any tools to selectively delete old alarms or events.
    How can I determine what has happened and what do I need to do to restart the logging?
    Any and all help most welcome.
    Bob L

    Lookout 6.0.2 uses SQL Server Desktop Engine which has the limit of 2G, so your alarm/event database has already reached the limit.
    After the SQL database is full, the alarm/event will be logged to Citadel database. But this maybe reduces the performance of Citadel, that's why we log alarm/event to SQL Server first. But I'm not sure why the alarm logging is stoppted.
    To delete the alarms from SQL Server is not straightforward. One way is to archive it. Follow the steps below.
    1. In MAX, create a new database in different folder.
    2. Create a Trace View and add the whole old database to the trace view.
    3. Right click on the Trace View and select Archive. Archive all to the new database. You don't need to specify the time range.
    4. After the achiving, the new database will have all the trace data and no alarm data in it. You can detach the old database.
    In Lookout, select File->Modify Process to change the database to the new database. Or you can change the system default database from Option->System. And then the lookout process will use the new database which has no alarm in it.
    You can keep the old database files. All the data and alarm/events won't be lost. When you need them, you can attach the database.
    Ryan Shi
    National Instruments

  • "alarm and event display" crashes my application

    Dear All,
    I use the "alarm and event disply.vi" in my DSC application. It works fine: I can acknowledge alarms, events etc. BUT...
    When I double click the alarm item (or press Alt-Enter) and watch the alarm properties in the Alarm Properties dialog, I can usually watch the properties for some time, selecting the next or previous alarm item, but most often than not, my application just crashes. I don't get any LabVIEW error dialogs. Only Windows is telling me that the application stopped working and it just closes giving me no explanation. Sometimes I don't even see the Windows message. 
    I've tried this on two different computers... same boat!
    I'm using:
    - LV2011
    - Windows 7
    In my application I create the shared variables programmatically, set alarm thresholds programmatically etc.
    Anybody had the same problem?
    regards
    Witold Nocon

    Well…I think I have isolated the problem, and I have recreated it in the Boiler example. Here’s what’s happening:
    If you watch the properties of the alarm in the Alarm and Event Display, and if this alarm “disappears” at this time, the application will crash. This will happen for example when this variable is set to AUTO ACK.
    You can try setting the R02 pump to zero. This will cause the L01 level  to increase reporting an alarm. Now if you set the flows so that the level start decreasing (I set the outflow to max, and the inflow tozero), and immediately click the HI HI alarm and watch it’s properties, the application will crash at the time when this alarm is cleared due to the decreasing level  (AUTO ACK).
    It also seems a “little non-deterministic” but this may be my own impression.
    Anybody had a similar problem or is able to recreate it?

  • Alarm and event notification DSC

    I can't understand the functionality of these DSC VIs:
    Acknowledge Alarms .vi
    Set user Defined Alarms .vi
    Request Alarm & Event Notifications .vi
    I appreciate any guide.

    Hi Maryam,
    Acknowledge is where the sequence action that indicates recognition of a new alarm.
    Where an alarm is an abnormal process condition. In the LabVIEW Datalogging and Supervisory Control (DSC) Module, an alarm occurs if a shared variable value goes out of its defined alarm limits or if a shared variable has bad status.
    This is the URL of the DSC module Glossary:
    http://zone.ni.com/reference/en-XX/help/370246D-01/lvdschelp/dsc_glossary/
    If you want to know more about the general functionality of alarms and events and what to use specific VIs for.
    The fisrst call as I said previously should be the context help, check the example library and the NI developer zone. Another reasource which you can check is the DCS module "VI, Function, & How-To Help".
    Click on the "Help" then "VI, Function, & How-To Help", expand the following items in the tree structure "DSC Module"> "DSC Module VIs & Functions" > "Alarm & Events VIs".
    For future reference it would be helpful in future if you gave more information in your posts eg what version of LabVIEW you are using - so can post back relevent versioned example code.
    And what you are trying to do - why are you interested in the DSC alarm VIs, could make more specific replies given this information.
    Sorry if my initial replies are basic but I had no way of knowing the level of information you were looking for and you did not say what you had already tried/ looked up.
    Alarms can be used in many applications but as I said their basic functionality is to alert the user to an abnormal process condition eg sub/super limit values or bad status.
    I hope the above helps but if you require more information please let me know what it is you specifically want to know.
    Regards,
    Emma Rogulska
    NIUK & Ireland

  • I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

  • Unwanted interface Alarms and Events in PI2.0

    We receive a lot of interface events and alarms from our 3560s access ports. We have not deployed any interface monitoring yet but still hundreds of alarms and events warns us about interfaces going up and down. Anyone who know why Prime is monitoring all interfaces and how to disable that?
    Many tanks in advance       

    Additional lab tests shows that all interfaces of a device indeed is monitored by snmp. When an interface changes from UP to DOWN/DISABLE an event and an alarm is generated. We have not deployed any "Interface health montoring" and still the interfaces are monitored. Not good for access ports.
    As a workaround we created a new Interface health monitoring template with the interface availability check disabled and just one other check enabled (interface util) and deployed it on two specific ports on a switch. Did not help. Alarms were still generated when the access ports were disabled.
    Any ideas?

  • Can you export a raw file photo with Lightroom adjustments attached?

    Can you export a raw file photo from Lightroom with Lightroom adjustments attached in some way?  If not what is the equivalent?  There are some individuals I would like to send the full data of the raw file, but with the non-destructive Lightroom adjustments layered on top.
    --Gerry 

    You can select "Original" as the file type, in Export. This saves out a copy of the imported source file into the selected location, labelling the current adjustments onto that image. When this is sent to somebody and imported to LR / opened in ACR, these metadata will be found and used automatically, with the exact same outcome as within your own LR Catalog - provided the LR / ACR versions are sufficiently compatible, and provided camera and lens profiles applied to the image, are present in both contexts.
    LR uses whatever method is normal when writing metadata, for each file type involved. So, if one imported file is a proprietary Raw file, LR will write an XMP file alongside. If another is capable of having metadata written into its file header, LR will do that instead.
    One important difference between doing this, vs writing LR metadata out to your original imported file, and sending that: the Export Original method will work in the same way, just as successfully, for one or more Virtual Copy versions (duplicating physically as needed), as it will for the primary Master version - relating to a given imported file.

  • Alarming and Event Data Storage Locations

    I'm having a problem where the Alarms and Events files are filling up the system disk and causing Lookout to crash.  Is there any way I can set things up so that those files are stored on another disk?  I already have the Historical files being archived on a separate disk, but the alarms and events seem to have stayed on the System disk.  The system disk doesn't have that much free space all the time, which is why I put the historical files somewhere else.
    Also, I have the Historical Data system set to only archive data for 90 days (it was changed a while back from storing perpetually), but I still have files in the database going back years.  Is there a way to purge the old data out?
    David Dudley

    David,
    It's important to note the alarms and events are actually in a separate database from Citadel. 
    This KnowledgeBase article discusses removing/archiving alarms from the database:
    http://digital.ni.com/public.nsf/websearch/B23BDD585BAEB25086256C00005C2851?OpenDocument
    Moving the alarms database is a bit more tricky.  It uses the MSDE 2000 SQL engine, which defaults to using a database on the drive it gets installed to.  I think short of installing Lookout to another drive, there's no "easy" way to move it over.
    Message Edited by Paul M. on 04-08-2006 12:16 AM
    --Paul Mandeltort
    Automotive and Industrial Communications Product Marketing

  • Can you export iCloud to Goggle

    Can you export iCloud to Goggle?

    iCloud and Google are two different services.  If you mean forward your email, log into icloud.com using a computer browser.  Go to the email page and click the gear in the upper right.  Click preferences and indicate which email address to forward to.

  • Alarm and event related problem

    hi dear all
    again my problem needs u
    On upgrading my project from labview 6.1 to labview 7.1 version i have problem in generating alarm related .ALR file which i further use in my software. for this i m using "legacy_hist_alarms_&_event_Query_to_spreadsheet_file.vi" this vi but in labview 7.1 i replaces it with
    "Alarms and event query to spreadsheet file.vi" but its number of display format and filter elements are changed i also changed these.
    but how i order the elements so i correctly connect with vi . i tried acc. to error list but it gives error every time so pls give the example or any suggestion regarding the order of elements .
    i m thankful to u all in advance
    regards,
    Dhanwanti

    Dhanwanti,
    What error are you receiving when you try to connect to the VI?  What do you mean by "order the elements"? Are you talking about the inputs to the VI? If so, the easiest way to connect to these are to right click on the terminal and select "Create -> Control", which will make a cluster that connects to the VI.
    Let me know if this helps.
    --Paul Mandeltort
    Automotive and Industrial Communications Product Marketing

  • DSC 8.01 Configuring alarm and event display control

    Hi all,
    How to configure the columns in this control (alarm and event display control) in order to hide columns, changing the langage ?
    In the previous DSC version it was different.
    Thanks
    Best regards,
    Julien

    Hello Julien,
    At my knowledge, such a control is not customisable. I think you should use the "Alarm and query filter" control (in your FP) linked to the filter input of the "Alarm and query" vi (in your diagram). This should enable you to select the alarms to display
    Regards,
    Mathieu Steiner, Test System Engineer, Safran Engineering
    CLD, ISTQB

  • Flash player on the new mac sarafi can't use keyboard and event listener

    flash player on the new mac sarafi can't use keyboard and event listener
    cn:英文有些差不好意思，附上中文说明：在flash player web 开发时，我在最新版本的sarafi上，目前出现不能响应键盘事件bug,为了验证是不是我本地问题，我也用在多款别的网页游戏上进行测试，全有这个bug，另外，有时还有那个fp弹出本地 缓存提示设置窗口也点不了“允许或拒绝“那些按钮

    Now after 5 weeks, you have always not resolved this very important and urgent issue. It seems that Adobe has realy abandonned the actionscript / flash player projects. Why not simply discontinue flash player on desktops too ? Or even better remove or block "automaticaly" all flash players with the final update. That could create a serious issue on the Internet for few weeks but at least that will be honorable end like a Samurai's Seppuku...

  • Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Maybe you are looking for