Prime Infrastructure (V2.1) CleanAir reports- historical data

Is there a configurable item for the data retention of clean air lowest AQ over time?
If I run a report and choose the option for "last 4 Weeks" I only get the last five days
In fact in the Clean air dashboard if I choose the last one hour  I still see the last five days.

It looks like NCS 1.3 allows you to update the OUI via - Admin->system settings -> user defined OUI
If you are on NCS 1.1.1.24, you will need to upgrade to 1.3 to modify the OUI

Similar Messages

  • Cisco Prime Infrastructure 2.1 Custom Reports

    Hi, I need to generate a custom Guest User report from Cisco Prime Infrastructure 2.1. It needs to have a couple more fields added to the existing "Guest User Association" report.
    Is it possible to connect to the Cisco Prime Infrastructure Database and Generate custom reports? Is there any documentation on this?
    Thanks

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • Report painter.....PCA reports & historical data issue

    I need to create a report painter PCA report for P&L that will do the foll:
    --> Consolidated P&L for 2 company codes
    --> Company code 1 - YTD figures to include full year
    --> Company code 2 - YTD numbers to include only 2nd half year as company 2 was acquired in middle of year
    Problem is we are migrating the historical data for the last two years. I do not want the report to pick up this as part of the report.
    Suggestions?

    anyone?
    Thanks

  • Cisco Prime Infrastructure - Is there a report of unused switch ports?

    Hello,
    Is there a report in Cisco Prime Infrastructure 1.4 showing the unused switch ports?
    There used to be one in Cisco Prime LMS (Reclaim Unused Up/Down Ports Report).
    Thank you,
    Luke

    Hello,
    I now have Cisco Prime Infrastructure 2.0 running, and I don't see a report like the "Reclaim Unused Up/Down Ports" report that existed in LMS.
    I found one called "Interface Capacity", but it only shows the number of ports that are "connected", "notconnect" or "disabled".
    Does anyone know if a report of Unused ports exists in Prime Infrastructure 2.0 or if it will be available later on?
    Thank you,
    Luke

  • Prime Infrastructure Failed to run report

    Hi all,
    on a new installed PI 1.2.1 I have the  following error message as soon as I run a report:
    Failed to run report: Could not connect to HTTP invoker remote service at [http://localhost:20556/reportingserver/remoting/ReportingService-httpinvoker]; nested exception is java.net.ConnectException: Connection refused
    I'm not sure if the "localhost" is the problem.
    Anybody any idea?

    Stopping and starting NCS didn't seem to help me. Reporting was running before I stopped NCS and after starting NCS
    Any other ideas?
    server/admin# show version
    Cisco Application Deployment Engine OS Release: 2.0
    ADE-OS Build Version: 2.0.1.038
    ADE-OS System Architecture: x86_64
    Copyright (c) 2005-2010 by Cisco Systems, Inc.
    All rights reserved.
    Hostname: SV195968
    Version information of installed applications
    Cisco Prime Network Control System
    Version : 1.2.1.012
    server/admin#
    Failed to run report: Could not connect to HTTP invoker remote service  at  [http://localhost:20556/reportingserver/remoting/ReportingService-httpinvoker];  nested exception is java.net.ConnectException: Connection refused
    server/admin# ncs status
    Health Monitor is stopped.
    Reporting Server is Stopped
    Ftp Server is Stopped
    Database server is stopped
    Tftp Server is Stopped
    Matlab Server is Stopped
    NMS Server is stopped.
    SAM Daemon is not running ...
    DA Daemon is not running ...
    Syslog Daemon is not running ...
    status
    server/admin# ncs start
    Starting Network Control System...
    This may take a few minutes...
    Network Control System started successfully.
    start
    server/admin#
    server/admin#
    server/admin# ncs status
    Health Monitor Server is running.
    Reporting Server is running
    Ftp Server is Disabled
    Database server is running
    Tftp Server is Disabled
    Matlab Server is running
    NMS Server is running.
    SAM Daemon is running ...
    DA Daemon is running ...
    Syslog Daemon is running ...
    status
    server/admin#

  • Prime infrastructure 2.0 inventory reports

    In lms it was easy to get inventory report on our router cards draughtboards etc. when I go to report launch pad>device>detailed hardware and run combined inventory I get "no data found" under the modules and interfaces....this is the ONLY report requested by the customer, is this really not available in PI 2.0?
    Sent from Cisco Technical Support iPad App

    Reports  (deatiled Hardware ) are working fine  for me.  check the attached screenshot
    Check the device  "Inventory collection status " under device >workcenter   . status should be completed for those device
    Thanks-
    Afroz
    [Do rate the useful post]

  • Prime Infrastructure (2.0) utilization report on port group possible?

    Hello
    I want to create an interface utilization report for a specific port group in PI, but can't see how to do that in the report setting. You only seem to be able to select a specific device or site rather than port group. Is it possible? Also, is it possible to put that on a dashlet?
    thanks for your help

    Thanks for that Mahavir
    Yes, I worked that out a little while ago, and can now see interface utilization by port group on the Performance > Network Interface page. I do have another question however (well two)....
    I wanted to add graph over time for the utilization to the detail dashboard, but nothing shows up, even though I see the utilization in the network interface page, so I'm sure the monitoring is deployed. Why is the data missing from the graphs?
    Also, I wanted to see interface packets per second graphs, but see that is not part of any default template, so I created a customer SNMP template from the IF-MIB to do this, but I can only deploy that against sites/devices or a list of interfaces, and not port groups. Why can't I deploy a customer SNMP template against a port group?
    thanks for your help

  • Cisco Prime Infrastructure 1.3 - Assurance reporting

    We have Assurance license and we are exporting netflow and pretty much everything is working fine. Traffic is seen, recognized by protocol, DSCP, source/destination IPs, etc.
    Now, the question is, can dashlet present data that is less than one hour?
    For example, you select Serial interface on MPLS router and it will show you IP addresses that used most amount of bandwidth in last hour, but it would be much better if we could chose much less amount of time (like 5 minutes or lower), because in case of temporary congestion it won’t give exact information who is using most of the traffic. We would like to see who is currently consuming most of the bandwitdth.
    Or is there any other way to get info for interface level (or device) who’s using most and what type of traffic (something similar to show ip cache flow command on the router).

    Under the "Detailed Dashboards" pages, you can customise the Time Frame in there.  Default is past hour but you can specify smaller and/or more specific time periods as necessary... I've checked that this works ok in CPI 1.3 for both the "Interface" and the "End User Experience" tabs.
    Richard

  • Prime Infrastructure 1.4: Clear Disk Space

    In order to reduce disk space usage on Prime Infrastructure I will reduce the System Data Retention period (for aggregate data) and "Background Data Collection Task" raw data  retention (for non-aggregate data).   If I now run  'ncs stop / ncs cleanup / ncs start, will this inmediately clear the disk space or does some other event clear the disk space?
    Thanks.

    ncs cleanup should be able to retrieve some disk space.
    You can check the details of how it works from this document here.
    -Thanks
    Vinod

  • Prime Infrastructure 2.1 Client Statistic Report Issues

    Hello Community,
    I hope you can help with a couple of issues I am seeing on Prime Infrastructure 2.1, running an evaluation 60 day license.
    My PI 2.1 build is currently managing a WLC 5508 running 7.4.121.0, which has been added successfully. No configuration changes were applied to the WLCs, other than SNMP community. No AVC or medianet configuration is applied.
    When looking in the 'Operate>Client and Users' dashboard; I can see connected clients and if I select one of them, I can see further details like session, security and client statistics (showing traffic and 802.11 metrics). These are the table views that show current values, however, further down I see graphs but they do not contain any information for RSSI, SNR or traffic sent & received (packets or bytes).
    Question: Should I see this information under an evaluation license and if so, what could be stopping it?
    Also, when I run the reports 'Report>Report Launch Pad' and select 'Client>Client Traffic' or 'Client>Client Throughput' the resulting report contains 0 bps, when I select 'Report By' AP by Floor Area. I have created a single floor area and placed three access points into it.
    Out of interest if I do a report of the same type using 'Report By' All or AP by Controller, I do see traffic graphs for 3 out of 333 access points. Just not the access points that are in my floor area. Also the amount of traffic utilization is tiny (less than a kbps) for a WLC with 800 users.
    For a 'Client>Client Count' report using AP by Floor Area, I do see the client numbers connected to the WLC/APs in my configured floor area.
    Question: Should I see reports for client traffic and throughput under an evaluation license for floor areas and if so, what could be stopping it?
    I have checked the background task and the 'Client Statistics' task is enabled and run time is being updated.
    Kind regards,
    Ian

    Hi,
    here is an update:
    There are more than one Report you need to start to get data for Device, FAN, Power Supply, Module - look at these reports:
    Report > Report Launch Pad > Device > Inventory
    Report > Report Lauch Pad > Device > Wired Detailed Device Inventory
    Report > Report Lauch Pad > Device > Wired Module Detail > Wired Module Detail Report Details
    SFPs and GBICs cannot be reported til now - there are working on it.
    br,
    chris

  • Prime Infrastructure 2.2- problems: Wired Detailed Device Inventory report not running / Cisco 5500 WLCs no listed in subgroup

    New installation of Prime Infrastructure 2.2.0 (PI-VA-2.2.0.0.158.ova)
    installed fixes/software/device packs:
    PI 2.2.1 Poodle Fix (installed)
    PI 2.2.1 Maintenance Release (installed,ncs stopped,rebooted)
    Prime Infrastrucutre 2.2 Device Pack 3 (installed,ncs stopped,rebooted)
    Licences installed (ncs stopped,rebooted)
    Added all devices via Bulk Import (Inventory>Device Management>Network Devices)
    Problem 1:
    The Cisco 5500 WLCs are not listed in Inventory>Device Management>Network Devices (see screen shot) but listed under "All Devices"!
    The Cisco 4400 WLCs and the 8500 WLCs are listed within their subgroup.
    Devices are in "Managed State"
    Problem 2: fixed! (Browser issue)
    Problem 3:
    Unable to run "Wired Detailed Device Inventory" report because I get the error message: Failed to run report: Unable to retrieve data for: Chassis Information (if Chassis Information is selected, if System Information is selected I get the error message with ...retrieve data for:System Information)
    All devices do have an "Admin Status = Managed" and the Last Inventory Collections Status = Completed.
    Has anyone the same issues or a tip for me?
    Another topic, the "User Defined Fileds" are not exported when with running a "Device Export" (Inventory > Device Management > Network Devices). ;-(
    BR
    Bastian

    Hallo Bastian,
    I think you still have browser issue, Using IE is still the best with Prime.
    I have exactly same prime 2.2 and installed fixes/software/device packs.
    I have no problem I can see all views. I use now IE 11, with Chrome 42.0.2311.90 and firefox 37.01 I have problems too with lots of views. You have not tell what browser + version you have.
    Since you have same prime 2.2 as me. I have other problems, can you check yours?
    Can you see a functional CLI template page at Configuration > Templates > Features & Technologies:
    https://supportforums.cisco.com/discussion/12481691/can-cisco-prime-22-still-do-simple-ad-hoc-deployment-job-cli-over-all-switches
    Do you have SNMP Connectivity Failed while Verify Credentials  has no errors all green and checked. 
    https://supportforums.cisco.com/discussion/12494786/snmp-request-exceeds-internal-data-buffer-512-bytes-prime-22-asa-5545

  • Cisco Prime Infrastructure 2.1 Not generating reports

    Dears,
    I am new to Cisco Prime. I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".
    Please advise.

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • Is there a way to get historical data for an AP that is no longer online via Prime?

    I am running a wireless network with about 130 AP's connected to a 8510 controller and using Prime for management.  I am trying to get AP utilization for an AP that is no longer connected and when I try to run the report Prime reports that it cannot pull the report because the AP is offline.
    Is there some way to get historical data for this AP?  Does Prime store this type of data?
    Seth

    I believe that all devices need to be up in order to pull any information current or historically.  If the AP is down, I don't think that a report in Prime will show info for that given device even if you set the date/time to when it was up. Never really looked into that as I've never tried to look at info if the access point was down. If you run a report on channel changes, does the AP show up?
    -Scott

  • Cisco Prime Infrastructure 2.0 release date

    What is the release date for Cisco Prime Infrastructure ?  What are the improvement from 1.2 to 2.0 ?
    thanks
    Morgan                  

    It's currently due out 31 August 2013.
    I haven't seen the final release notes but it will incorporate a lot of the features currently in LMS 4.2 for wired infrastructure management that are currently missing in PI 1.x.
    I have heard it will not include Topology or template compliance reports and jobs at 2.0 - those features did not make the development cutoff date for 2.0 but they are projected for 2.1.

  • Prime Infrastructure 2.1: Report - Device - Inventory

    Hi there,
    we want to have an inventory report of your device database.
    The infrastructure is a wild mix of Catalyst 6500er, 3560X, 3750X, N7K, N5K, WLC, etc.
    We are using the prime infrastructure 2.1 Report Launch Pad and the API site. The maximum we get of a N7K:
    UDI serial number
    FAN serial number
    The whole Module serials numbers are missing. How do we get this data?
    br,
    chris

    Hi,
    here is an update:
    There are more than one Report you need to start to get data for Device, FAN, Power Supply, Module - look at these reports:
    Report > Report Launch Pad > Device > Inventory
    Report > Report Lauch Pad > Device > Wired Detailed Device Inventory
    Report > Report Lauch Pad > Device > Wired Module Detail > Wired Module Detail Report Details
    SFPs and GBICs cannot be reported til now - there are working on it.
    br,
    chris

Maybe you are looking for