Prime infratructure NCS 1.2 CSCOlumos/bin/wcsadmin error

Dear all,
After a successfull installation of NCS 1.2 into a vmware environment and run the setup I have the following error while trying to start or to have a status for NCS (ncs start ot ncs status):
sh: /opt/CSCOlumos/bin/wcsadmin.sh No such file or directory
any idea please ?
Regards,
Vincent

My solution:
I had the same issue. The reason for that error is not insufficient disk space, but a small disk size. If you install it on a 100 Gigabyte volume for example, the install process simply interupts, and you end up with the empty volume (try "DIR"command - the disk will be empty).
Try to Install it on a 350 Gb volume, i believe that this is the minimum Disk requirement.

Similar Messages

Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/char.bin Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/dicrc Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/matrix.bin Open error 5: "Input/outp

Please can any one help.
All sound has disappeared from my imac, it just 2 years old, I've run disk warrior and disk repair/verify and this is what come up.
ARe there any solutions?
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/char.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/dicrc
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/unk.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/unk.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/char.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/dicrc
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/unk.dic
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeDirectory
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeRequirements
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeResources
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeSignature
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/_CodeSignature/CodeRequirem ents
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/PlugIns/AppleSM56KU SBModemFamily.kext/Contents/_CodeSignature/CodeRequirements
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/Resources/English.l proj
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/Resources/English.l proj/InfoPlist.strings
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/_CodeSignature/Code Requirements

Whew, generally those errors would indicate a serious Hard Drive problem, but possibly RAM or Logic Board... any other drives connected?
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029

Error running command: /usr/java/bin/java: error execing process: Not enoug

Error running command: /usr/java/bin/java: error execing process: Not enough space
In a whole root zfs zone the webconsole service fails to start. This is what I get:
svc:/system/webconsole:console (java web console)
State: maintenance since Fri Aug 27 14:32:41 2010
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: man -M /usr/share/man -s 1M smcwebserver
See: /var/svc/log/system-webconsole:console.log
Impact: This service is not running.
# more /var/svc/log/system-webconsole:console.log
^C# more /var/svc/log/system-webconsole:console.log
[ Aug 6 09:30:40 Disabled. ]
[ Aug 6 09:30:40 Rereading configuration. ] [ Aug 6 09:30:52 Enabled. ] [ Aug 6 11:32:50 Enabled. ] [ Aug 6 11:33:02 Executing start method ("/lib/svc/method/svc-webconsole start"
Starting Sun Java(TM) Web Console Version 3.1 ...
The console is running.
[ Aug 6 11:33:25 Method "start" exited with status 0 ] [ Aug 27 14:32:15 Enabled. ] [ Aug 27 14:32:28 Executing start method ("/lib/svc/method/svc-webconsole start"
Error running command: /usr/java/bin/java: error execing process: Not enough spa ce [ Aug 27 14:32:41 Method "start" exited with status 95 ] # df -k
Filesystem kbytes used avail capacity Mounted on
/ 0 4341506 3761710 54% /
/dev 8103216 4341506 3761710 54% /dev
proc 0 0 0 0% /proc
ctfs 0 0 0 0% /system/contract
mnttab 0 0 0 0% /etc/mnttab
objfs 0 0 0 0% /system/object
swap 2498344 360 2497984 1% /etc/svc/volatile
/platform/SUNW,T5240/lib/libc_psr/libc_psr_hwcap2.so.1
8103216 4341506 3761710 54% /platform/sun4v/lib/libc_psr.so.1
/platform/SUNW,T5240/lib/sparcv9/libc_psr/libc_psr_hwcap2.so.1
8103216 4341506 3761710 54% /platform/sun4v/lib/sparcv9/libc_psr.so.1
fd 0 0 0 0% /dev/fd
swap 2497984 0 2497984 0% /tmp
swap 2498024 40 2497984 1% /var/run
Grp-MFNY/billables/RV
20514816 22 3761710 1% /RV
Grp-MFNY/billables/TT_DB
20514816 28 3761710 1% /TT_DB
Grp-MFNY/billables/tab

You need to find the java exceptions - most likely in the logs in the /var/log/webconsole/console directory.
A wild guess is you don't have enough swap space to perform a fork.
-- Ken

[appldev@oracletrng5 ~]$ ./startAPP /bin/sh: error while loading shared lib

Hi hussein,
I got error when I startup my new cloned Oracle apps 11i in OEL5.6
[appldev@oracletrng5 ~]$ ./startAPP
/bin/sh: error while loading shared libraries: libdl.so.2:
cannot open shared object file: No such file or directoryOr all command line (like "ls", "cat", etc) throws this error :(
But if I am a "root" user I can run this.
Please help...
Thanks
Edited by: crystal on Feb 18, 2011 5:53 PM

Hi hussein,
It seems only the discoverer start script got error. The metalink notes said:
Oracle Discoverer 4i is not certified with Oracle Applications 11i since December 2006.
Solution
To implement the solution, please execute the following steps:
1. Upgrade Discoverer to version 10.1.2 or later as per Note 313418.1
Using Discoverer 10.1.2 with Oracle E-Business Suite 11i. I think we are not using discover. Do I need to fix it?
But the start all script has status "1" at the end of run. which meant not successful.
Below is the complete log of start all script:
[appldev@oracletrng5 ~]$ ./startAPP
You are running adstrtal.sh version 115.16
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/adapcctl.sh start
script returned:
adapcctl.sh version 115.50
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/adalnctl.sh start
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_DEV.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/adcmctl.sh start
script returned:
You are running adcmctl.sh version 115.28
Starting concurrent manager for DEV ...
Starting DEV_0220@DEV Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/adfrmctl.sh start
script returned:
You are running adfrmctl.sh version 115.37
Starting forms server for DEV on port 9000.
adfrmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/adrepctl.sh start
script returned:
You are running adrepctl.sh version 115.32
starting Reports Server for DEV on port 7000.
adrepctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/adfmcctl.sh start
script returned:
You are running adfmcctl.sh version 115.19
Starting forms load balancing client for DEV.
adfmcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/adfmsctl.sh start
script returned:
You are running adfmsctl.sh version 115.15
starting forms metrics server for DEV.
adfmsctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 115.16
Validating Fulfillment patch level via /u01/appldev/devcomn/java
Fulfillment patch level validated.
Starting Fulfillment Server for DEV on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/u01/appldev/devcomn/admin/scripts/DEV_oracletrng5/addisctl.sh start
script returned:
addisctl.sh version 115.15
/u01/appldev/devora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/appldev/devora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/appldev/devora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/u01/appldev/devora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/appldev/devora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/appldev/devora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Registering Discoverer Session
Registering the Collector
Applying preferences from file : /u01/appldev/devora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Registering Discoverer Preference Repository
addisctl.sh: exiting with status 1
.end std out.
/u01/appldev/devora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/appldev/devora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/appldev/devora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/appldev/devora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/appldev/devora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/appldev/devora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
./applypreferences.sh: line 26: 31747: Memory fault
/u01/appldev/devora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
.end err out.
Check logfile /u01/appldev/devcomn/admin/log/DEV_oracletrng5/02200048.log for details
Exiting with status 1What is this about? >./applypreferences.sh: line 26: 31747: Memory fault
Thanks a lot

Prime Infrastructure 2.2 . Backup Issue (Database error)

Hello to every one.
I have an issue with the PI 2.2. When i am trying to backing up the server (application NCS) i am taking back this error:
NCSELVINF/mpapa# backup PRIMETESTBACKUP repository PRIMEINFRAST.BACKUP application NCS
DO NOT press ^C while the backup is in progress
Aborting backup with a ^C may terminate the backup operation or the backup file may be corrupted
Backup Started at : 01/28/15 17:25:32
DB size is 99 GB
Available size is 53 GB
you might run out of disk space in repository, Do you want to proceed with backup
do you want to proceed [y/n]?
y
proceeding with backup
ERROR : Cannot proceed with backup as the free space available in oracle fast recovery area (54634 MB) is less than the current database size(60825 MB).
% Internal error: couldn't create backup file
How c an i increase the oracle fast recovery area from PI 2.2 ?

hello.
I have already a ftp repository configured where i am trying to take the backup.
repository PRIMEINFRAST.BACKUP
url ftp://10.57.22.212
user mpapa password hash e5b4b4647ea313bcbee41504a6b9885675927d7e
The hosting of repository location is staging at my PC (e:) local drive with plenty of capacity
The problem is the database capacity
Cannot proceed with backup as the free space available in oracle fast recovery area (54634 MB) is less than the current database size(60825 MB).
% Internal error: couldn't create backup file.
There is any way to increase the oracle fast recovery area ? One solution which i already done is to add one HD extra at the vm. But for me, i think that it is better solution increasing the fast recovery area , if this is impossible.

Prime Infrastructure NCS Alarm Message: CPU: 85 crossed down threshold: 90

Dears,
We have Cisco Prime NCS Ver.2.0 running on plad. Since yesterday the alarm give us severity major message (Message: CPU: 85 crossed down threshold: 90).
Please advice what this problem and how to solve it.
Thanks,

Hi Jeremy,
SNMP traps are shown in the events and alerts section of PI.
SNMP config looks fine. Can you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Can't open CS 5.0.4 Premiere Pro because of bin-file error.

I'm on an:
iMac
OS X 10.6.8
12 GB RAM
3.06GHz
I've had trouble with CS5 so i upgraded to CS5.0.4 PP and I cant open my project. It's a large project, over an hour long movie. I've spent over 7 grand of my own cash on it and a year of my life. This means the world to me to fix.
whenever I open Premeire it says :
Reverb
Can not open bin-file.
i understand that is an audio plug in error and i've been searching for it 10 hours. I know if i find it, remove it from the folder, it will open with all my reverbed audio gone. I'm fine with that, I can not for the life of me figure it out.
I'm begging for help.
Thanks,
Brett.

You didn't say if you were trying to load the Organizer or the Editor.
If its the Organizer, here are some troubleshooting tips: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Organiz er_crashes
If its the Editor, here are some troubleshooting tips: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes

Trash bin crashes error code -8003

Any thought on my trash bin not working?

Frist, just try restarting the computer, if it keeps happening then try to run a disk repair and a permissions repair, if that doesnt work, then take a look at resetting you ACLs.
Using Disk Utility to verify or repair disks
Disk Utility 12.x: Repair disk permissions
Repair User Permissions in Mac OS X

BIN to BIN transaction error

Hi experts,
     Recently I've received an error "1250000017 - Receipt warehouse cannot be identical to the release warehouse." in Bin to Bin transfer. Have you encounter this one? Can't find similar post with this.
Regards,

This is for my Bin to Bin
                                    .Lines.ItemCode = oDrView("product_reference_code")
                                    .Lines.Quantity = oDrView("quantity")
                                    .Lines.DistributionRule = oGetDim1(oDr("site_reference"))
                                    .Lines.DistributionRule2 = oGetDim2(oDr("site_reference"))
                                    'BIN to BIN Transfer
                                    .Lines.BinAllocations.BinActionType = SAPbobsCOM.BinActionTypeEnum.batFromWarehouse
                                    .Lines.BinAllocations.Quantity = oDrView("quantity")
                                    .Lines.BinAllocations.BinAbsEntry = BinLoc(oDrView("old_location"))
                                    .Lines.BinAllocations.Add()
                                    'oQuantity += oDrBin("quantity")
                                    'If oCount = oRows Then
                                    .Lines.BinAllocations.BinActionType = SAPbobsCOM.BinActionTypeEnum.batToWarehouse
                                    .Lines.BinAllocations.Quantity = oDrView("quantity")
                                    .Lines.BinAllocations.BinAbsEntry = BinLoc(oDrView("new_location")) 'BinLoc(oDrBin("location_code"))
                                    .Lines.BinAllocations.Add()
                                    'End If

Apply patch 6194129 lot of /usr/bin/ld errors

Hi
os...linux-x86.
ebs:11.5.10
Trying to apply patch 6194129 (developer6i_patch19). Getting lot of error messages like /usr/bin/ld: warning: i386 architecture of input file `tmabox.o' is incompatible with i386:x86-64 output.
logfile:
/usr/bin/ld: warning: i386 architecture of input file `uatstubs.o' is incompatible with i386:x86-64 output
/of02/patches/developer6i_patch19/bin/genshlib ifjapi60 0
/usr/bin/ld: warning: i386 architecture of input file `context.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `create.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `destroy.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `formsapi.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `iauasst.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `iauexcep.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ifjapi.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `objlib.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `persistc.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp30r.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp30w.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp40r.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp40w.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp4cr.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp4cw.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp4gr.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp4gw.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `ibp4wr.o' is incompatible with i386:x86-64 output
etc

The error message indicates that you are trying to apply a 32-bit patch on a 64-bit OS.
I understand you are running 11i on 32-bit OS, so have you downloaded the correct version of the patch?
Do you have the 32-bit version of gcc file installed?
Also, please make sure that ORACLE_HOME is set to 8.0.6 ORACLE_HOME (not to iAS_ORACLE_HOME as mentioned in the patch README file).
If all the above are correct, then you may proceed with the patch and see if it applies successfully.
Thanks,
Hussein

Scilab5-bin startup errors

I need to use the software Scilab, I've chosen the package scilab5-bin, maintained by Sloonz. I've already installed it, but there are several errors during startup. These have been already reported in the package page, almost two months ago, and I've also emailed the maintainer, but there was no answer.
The errors described by DaveCode are the same as mine, you may see them here. I haven't found anything related to this, so I'm stuck.

sorry, i have added individual ones.. this might make it easier

Storage Bin Structure error

HI All
I cannot see where my bin structure is wrong, can someone please help
Template
C
C
N
N
C
N
N
C
A
N
Structure
A
A
B
C
Start value
S
L
0
1
0
1
A
1
End value
S
L
0
1
0
5
E
4
Increment
0
1
1
1
Bins should be created SL01-01-A1 to SL01-01-A4 then change to SL01-01-B1 to B4 all the way to E4 then change to SL01-02-A1 and then repeat the A1 to E4 bins until it reaches SL01-05-E4
Error is 'Structure does not fit into format'
Where am I going wrong?
Thanks in advance
Darren

Apologies
I took a break, came back to my screen and I could see my error
1st 5 characters should have been 'C' as there was no change to their value.
So it looked like this below
Template
C
C
C
C
C
N
N
C
A
N
Structure
A
A
B
C
Start value
S
L
0
1
0
1
A
1
End value
S
L
0
1
0
5
E
4
Increment
0
1
1
1
Now no error!!
Regards Darren

After installing updates, Firefox won't work. I got the message /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager Error: Platform version '1.9.2.4' is not compatible with minVersion = 1.9.2.6 maxVersion /Applications/Firefox.app/Conten

I cannot access download.mozilla.org. I need to do a fresh install after something went wrong with my updates and now Firefox won't even open so I am using Safari. I don't know why I can't get download.mozilla.org: is it because I am in China and it's now been blocked or is there a problem with the website?
== I downloaded the updates. ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en-us) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.<br />
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I get this from CiscoWorks /opt/CSCOpx/bin/perl "ERROR: MAXENV value reached, fix this perl wrapper". How do I fix this?

I am running this on Solaris 10 Sparc.

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Missing java on secondary Cisco Prime Intrastructure 1.2

Running CPI 1.2 medium on VMs, everything's fine with the primary server, but java is missing from the secondary. Executing ncs status, It returns :
CAMTLCPCE876/admin# ncs status
/opt/CSCOlumos/bin/wcsadmin.sh: line 221: /opt/CSCOlumos/jre/bin/java: No such file or directory
/opt/CSCOlumos/bin/sam_admin.sh: line 22: /opt/CSCOlumos/jre/bin/java: No such file or directory
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
status
running ncs start gives :
CAMTLCPCE876/admin# ncs start
/opt/CSCOlumos/bin/ncstuning.sh: line 76: /opt/CSCOlumos/jre/bin/java: No such file or directory
/opt/CSCOlumos/bin/wcsadmin.sh: line 221: /opt/CSCOlumos/jre/bin/java: No such file or directory
start
from the root, jre folder is there but emmpty
ade # ls /opt/CSCOlumos/jreade # ls /opt/CSCOlumos/jre32COPYRIGHT LICENSE README THIRDPARTYLICENSEREADME.txt Welcome.html bin javaws lib man plugin
Is this a normal behavior on the secondary server?

HI Louis,
Did you get to solve the issue??
i have this output on an appliance enviroment (NOT VM):
PRIME-SERVER/admin# NCS status
sh: /opt/CSCOlumos/bin/wcsadmin.sh: No such file or directory
PRIME-SERVER/admin# show application status NCS
% Application NCS is not installed
PRIME-SERVER/admin# show application
PRIME-SERVER/admin#
Any idea???
Diego.

Prime infratructure NCS 1.2 CSCOlumos/bin/wcsadmin error

Similar Messages

Maybe you are looking for