Prime LMS 1.2 NMS Server is stop and GUI can not access
Anyone Knowles about Thio problem?
I attach the screenshoot
Dwi
Sent from Cisco Technical Support iPad App
Has it ever worked?
If so, have you tried recycling the application server ("ncs stop" and then "ncs start")?
Similar Messages
-
Extracting will not stop and I can not cancel.
Photoshop Elements 11 has been extracting for upwards of 4 days and I can not cancel or stop, the controls are grayed out.
How can I stop it and start over?
-Aaron -
iMac purchased in January 2011. Updating from snow leopard 10.6.8 to Mountain Lion. Download will not complete. At 75% downloaded it stops and says to check Internet connection. What should I do? Before the download I used Disk Utility to check/repair permissions, all software is up to date, and I emptied the trash.
First, you are downloading Mountain Lion, so this error is not related to your disk drive. The problem is apparently with the internet connection between the computer and your router or your modem and Apple's servers. So it's an internet connection issue.
At your end you can verify your connection is active and working. If you are using wireless then try using an Ethernet connection instead. -
I can not update ITunes to 11.1.5 becasue it stops when it's almost done. Then I can not open the store and Itunes crashes and it tells me to update and ITunes closes. I'm nt very happy.
Many thanks, that's perfect.
Errors occurred while installing the update. If the probalem persists choose Tools > Download Only and try installing manually.
With that one, first try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
my apple TV works for everything except Hulu an Netfix. When I try to open them I always get the message that they are not available and to try again later
Update software. If that doesn't work try resetting. Mine started working after the update.
-
CSCuf25963 - PI1.2 Health Monitor is running, with an error/NMS Server is stopped
Hi,
I am hitting bug, where the nms service stops atleast twice in a week and and then come back after 10 mins.
Does ny one know when there will be a patch release for this issue?From the bug notes, it looks like version 2.0 and later will have the fix.
However, if the service stops and you have not changed the hotname/IP address from the original setup, this is probably not your bug. You may want to open a case with the TAC.
If that is the case, follow the workaround instructions in the release note to update the information on the server. (That is, from the root shell, update the file /opt/CSCOlumos/conf/messaging.properties with the correct IP address.) -
When i Tap on my apps - like Direct TV from my phone i can not access the site. this is with weather site etc.
the error message "site not found" server stopped responding; or no server found.Firstly, DO NOT post imie numbers on a user to user forum - it is not safe to do so and your are NOT talking directly to Apple here.
Secondly, you need to go back to Apple in the country in which you bought the phone and get help with it there. Go back to the Apple store in the country in which you bought the phone. The warranty on the iPhone is not international, so is only valid for the country in which you bought it. -
When I delete something on Mac Mail it automatically is deleted on the Yahoo server. Why and how can I stop this happening and leave it on the server?
I believe that that is how IMAP accounts are designed to work, if you delete an email from a computer or device then it will be deleted from the server. If possible you could try setting up the account as a POP account in the Mail program and you should then get a 'remove copy from server' tickbox (which will need to be unticked) on the account's Advanced tab in Mail > Preferences.
I've asked for this post to be moved to the Mountain Lion forum, this is the iPad forum. -
Can not access server's on public ip's
Guys,
We have a core switch with two fibre lines connecting us through two different ISP's to the internet. These ISP's have provided us with a range of public ip's each. We have a few routers on some of these ip's and they are working fine and we can access them externally (telnet and ssh).
I am now busy setting up two servers, one on each ISP with their respective public ip's. I can ping the core switch and the isp gateways from the servers and from the core. I have triple checked that there are no active firewalls and I can see that the http ports are open and accessible (TcpView). But for the life of me I can not access those servers externally. I am now completely stumped. I do suspect though that it is a routing problem through the core.
And herewith the relevant parts from my Core switch's config:
version 12.2
service tcp-keepalives-in
service tcp-keepalives-out
hostname SMS-CORE
no aaa new-model
clock timezone ZAR 2
no ip source-route
mls netflow interface
mls cef error action reset
spanning-tree mode pvst
spanning-tree portfast edge default
vlan internal allocation policy ascending
interface FastEthernet3/25
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/31
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/35
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/37
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/47
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/48
ip address 192.168.2.2 255.255.255.252
interface Vlan1
no ip address
interface Vlan20
ip address PUBLIC_IP1 255.255.255.240
interface Vlan153
ip address PUBLIC_IP2 255.255.255.248
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.2.1
ip local policy route-map PUBLIC
access-list 100 permit ip ISP2_NETWORK 0.0.0.7 any
access-list 101 permit ip ISP1_NETWORK 0.0.0.15 any
route-map PUBLIC permit 10
match ip address 100
set ip default next-hop PUBLIC_GW2
route-map PUBLIC permit 20
match ip address 101
set ip default next-hop 192.168.2.1
Any ideas guys, I am at my wits end here ....
Thanks as always !Hi Oliver ,
Have you got IP Address assigned to your server from the same segment ?? like for server 1
ip address PUBLIC_IP1 255.255.255.240
and for server 2
ip address PUBLIC_IP2 255.255.255.248
What is the gateway IP address assigned for both servers .
HTH
Sandy -
I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?
Set up iCloud
Set up iCloud (2) -
i have iphone 4 and it worked previously but then lost service, contacted provider and said would have to do factory reset. Did the reset and now can not activate phone. said server was not working to connect to itunes. Connected to itunes and still can not activate it. any suggesgtions?
This is the iPod touch forum. I requested your post be moved to the iPhone forum
-
We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC) 0x1BC0 SharePoint Server Search Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588) 0x1DE4 SharePoint Server Search Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC) 0x1060 SharePoint Server Search HTTP Protocol
Handler du4i 0x29E4 SharePoint Server Search HTTP
Protocol Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x29E4 SharePoint Server Search HTTP Protocol
Handler du54 High CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x130C SharePoint Server Search Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x2948 SharePoint Server Search Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvg0 High STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
en0e High CSTS3Accessor::InitURLType: Return error to caller, hr=80041200 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dv3p High CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb1 High CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb2 High CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200 [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil LokaHi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
Ping <servername>
2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
Oracle BI Publisher - can not access Shared Folder , using Oracle BI Server
Hi there,
We have an installed OBIEE and BIP (BI Publisher) system which is the security setting of BIP using "Oracle BI Server".
Our OBIEE security is using the combination of LDAP (authentication) and Relational Table (for grouping user privillege)
The integration connection between OBIEE and BIP is successfull, and I can connect using Administrator to the BIP
But when I assign a general user using group : XMLP_Admin (define in rpd file and relational table), the user can log in to BIP, but can NOT access the Shared Folder.
the error desc : "Error 500: SRVE0199E: OutputStream already obtained"
Anyone can help ?
Thanks a lot
-toniDid you define Roles and Permissions to the shared folder from BIP Admin?
-Prakash -
After install Crystal Report Server 2011, can not access control tools
Afte install Crystal Report Server 2011, can not access control tools from web or from application.
My server OS is Windows 2008 R2 SP1. I follow the default setting. How to fix it?
Error message is above.Is Tomcat started? On your Start menu you should have an option to get to "Tomcat Configuration" or, under the CRS menu you can run the "Central Configuration Manager" to start Tomcat.
What URL are you using to connect to the web app? By default Tomcat runs on port 8080 so your URL should look something like this: "http://<servername>:8080/BOE/CMC" or "http://<servername>:8080/BOE/BI".
If Tomcat is running and you're trying to access it from another computer, check to see if the Windows Firewall is turned on for the server - if it is, turn it off for "Domain" access.
If Tomcat won't start, go to the folder where Tomcat is installed and then look in the "logs" folder. There should be a file called "stderr.log" which you can open in Notepad to see what types of errors might be occurring (you can ignore any errors having to do with "persisted sessions".) If there are other errors, post in the BI Platform space to get assistance.
-Dell
Maybe you are looking for
-
I was using my I pad for work and school using keynote and pages I took off for a holiday and now my doc are not available on my pad. How did this happen and how do I fix this?
-
Source File shows White Screen in Source + Program Monitor
Hello, I'm having an issue with only one of three media files in my Premiere Pro CS6 project. When I try to preview this one video file in the Source Monitor, it shows only a white screen, and I can only move the playhead to the beginning and end of
-
Need help printing in classic to hp laserjet 3050
when I try to print a classic document it can't find my printer. I look in chooser and it's not there. I have both the mac os X 10.3.9 and the mac 9.1. No problems with os X
-
Someone has sent me the AVCHD and DCIM folders to import into iMovie. They live on my desktop. How do I bring them into an event library?
-
What permissions needed to view index statistics for a database?
Im trying to setup a job that will read index statistics about a given database. The system management views are in Master. Im trying to test the permissions for the login that will be used by doing Execute As, but Im getting permission errors such