Prime NCS 1.2 Documentation Available?
I've started playing with a NCS Appliance that we recently received in our lab environment.
However, when I run the SHOW VER, I'm getting that it shipped with 1.2. This is fine and I would like to keep the NCS on 1.2, as it works with our WLC and MSE existing firmware editions.
My issue is that I can't seem to find any documentation on the Cisco Library for 1.3, it appears 1.1 is the most recent available.
Should I use the 1.1 documentation or is there any 1.2 documentation available? Any links would be much appreciated.
Sent from Cisco Technical Support iPhone App
Oh I see.
Ok so QQ - since I'm studying currently for my CCNP Wireless, I've seen the study material reference WCS. I was then informed that the study material was not up to date, so anything I read about WCS was applicable to NCS as it replaces WCS.
So now are you saying anything I've read about WCS is applicable to Prime?
So when I say "Prime" and "NCS" I'm speaking of 2 different appliances?
Just for my final clarification, Prime is the replacement of NCS?
Sent from Cisco Technical Support iPhone App
Similar Messages
-
Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)
Hello,
Does someone have issue with backup NCS via externally mounted location (NFS)?
I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
NCS/admin# backup ncs repository backup_nfs
% Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
You do not have enough disk space available in your repository to complete this backup.
DB size is 25 GB
Available size is 12 GB
Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
Stage 5 of 7: Building backup file ...
-- complete.
Stage 6 of 7: Encrypting backup file ...
-- complete.
Stage 7 of 7: Transferring backup file ...
-- complete.
I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
NFS share works perfect. I have checked it via NFS repository:
repository backup_nfs
url nfs://server2008:/nfs
+++++++++++++++++++++++++++++++++++++++
NCS/admin# show repository backup_nfs
NCS-130130-1135.tar.gpg
NCS-130130-1137.tar.gpg
NCS-130130-1157.tar.gpg
NCS-130130-1158.tar.gpg
test-130130-1210.tar.gz
Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
Does someone know how can I backup NCS system?
Thank youHow much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB....
The backup-staging-url is just for a space used to stage the backup before it is written----- -
I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
"PI-upgrade-bundle-1.2.0.103.tar.gz".
after the upgade I have got the Message "Upgrade Successful".
Now when I start the NCS i get the following error message
egghead/admin# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
In the launchout.log are this messages:
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
truststore used is /opt/CSCOlumos/conf/truststore
truststore used is /opt/CSCOlumos/conf/truststore
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting Remoting Service: Reporting Server
Checking for running servers.
00:00 Check complete. No servers running.
Starting Server ...
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
have anyone an idea whats wrong?
thank you for your help
Kurti have the same problem
NCS/admin# ncs status
Health Monitor Server is starting.
Reporting Server is Starting
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
status
I try it
To get it back up and running do the following from the CLI.
1. Stop the NCS
2. Run 'ncs db reinitdb'
3. Start the NCS
but the status is the same -
Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS
Hi,
Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime NCS .
We have PILMS42-1.5K-U license available with us.
Rgds,
KamalOne can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
Please refer to the ordering and licensing guide here. -
Hi,
A Cisco Prime NCS physical appliance has been shipped with version NCS 1.1
Then it has been upgraded to:
1) ncs_patch-1.1.0.58-upgrade-12.tar.gz
2) PI-upgrade-bundle-1.3.0.20.tar.gz
Our customer have got only 1.2 licenses. How can we downgrade the appliance to 1.2 ?
Or how can we re-install 1.1 or 1.2, for both versions we did not find the iso's to download.
Thanks in advanceHello,
What is the Current verison of NCS ,you are using ?
AFAIk, you can Installed PI 1.3 directly as PI 1.2 is not available for download.
Conatct the License Team and they will re-host the license for you.
you can downlaod the iso file from the below link:
http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272932&release=1.3&relind=AVAILABLE&rellifecycle=&reltype=latest
Note:Upgrade from Cisco Prime Network Control System 1.1.2.12 or 1.1.3.2 to Cisco Prime Infrastructure 1.3.0.20 is not supported.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors **** -
Cisco Prime NCS appliance & license
Hi all,
I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
1. Does the appliance has any license coming with it or we need to order the license separately?
2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
Thanks for the help,Cisco Prime Infrastructure for the first time you may access the lifecycle and assurance features using the built-in evaluation license that is available by default. The default evaluation license is valid for 60 days for 100 devices and 150 interfaces. You will need to purchase the base license and the corresponding feature license before the evaluation license expires. Cisco Prime Infrastructure 1.2 can be ordered using the standard Cisco® ordering tools at http://www.cisco.com/go/ordering. More information about getting the license files can be found in the Cisco Prime Infrastructure 1.2 Ordering and Licensing Guide
-
Cisco Prime NCS v1.1 Eval Download
Hello,
I've been trying to download the evaluation of Cisco Prime NCS v1.1 from the eval page located at the below address so I could, well, evaluate it.
https://cisco.mediuscorp.com/market/networkers/productView.se.work?/nxt/rcrs/proieidentity/=19841
But I've been getting corrupt downloads and can't extract the .OVA file. I've tried this on a few computers and 2 different OSs, but to no success.
Am I doing something wrong?
Thank you in advance and sorry if this is the wrong forum to ask this question.@wireless.wlc
I installed it on a Cisco UCS server running vSphere 4.1 (ESXi). The template wants to make it thick provision, but for testing purposes I just made it thin provision. After only adding maybe... 20 switches, 18 APs and 1 WLC it takes up just shy of 40 GB.
If you try to install on a 50GB hard drive or a datastore that's less than 200GB available, it will probably just give you a warning. But I'm not 100% sure since this is being deployed from from an OVA template.
I'll install it again on a datastore with only 100GB to test and see if it works that way. -
I have a Prime NCS appliance running 1.0.2.29 and I need to upgrade it to 1.1.0.58. I have downloaded the code from the Cisco site but I need to know how to upgrade the NCS.
Use the following command to upgrade from NCS 1.0 to NCS 1.1.0.58:
# application upgrade NCS-upgrade-bundle-1.1.0.58.tar.gz wcs-ftp-repo
In the preceding command, NCS-upgrade-bundle-1.1.0.58.tar.gz is the upgrade bundle file, which is available for download.
The repository used in the example, wcs-ftp-repo, can be any valid repository.
Examples of repository configurations follow.
FTP Repository:
# configure
(config)# repository wcs-ftp-repo
(config-Repository)# url ftp://ip-address
(config-Repository)# user ftp-user password plain ftp-user
(config-Repository)# exit
(config)# exit
SFTP Repository:
# configure
(config)# repository wcs-sftp-repo
(config-Repository)# url sftp://ip-address
(config-Repository)# user ftp-user password plain ftp-user
(config-Repository)# exit
(config)# exit
TFTP Repository:
# configure
(config)# repository wcs-tftp-repo
(config-Repository)# url tftp://ip-address
(config-Repository)# exit
(config)# exit
# -
Hello all,
we have Cisco Prime NCS Ver. 1.0.2.29 running on a virtual appliance. Since a few weeks the alarm summary shows alarms but the alarm browser window is empty.
Any ideas?
Regards,
HubertHubert,
You should install the patch logged in as the admin user to the CLI of the NCS appliance
The latest patch for NCS 1.1.1.24 is named ncs_1_1_1_24-Update.13.4.tar.gz and can be found here:
http://software.cisco.com/download/release.html?mdfid=284396249&flowid=34522&softwareid=284272933&release=1.2.1&relind=AVAILABLE&rellifecycle=&reltype=all
Here’s a way to install the patch:::
1) From your PC launch a CMD Prompt
2) CD to the directory where the patch is installed
3) ftp xxx.xxx.xxx.xxx (this is the IP address of the NCS/PI server)
4) login as ftp-user
5) enter the password created during the install of NCS/PI for the ftp user account (if you don’t know it, you can change it by entering:
a) ncs password ftpuser ftp-user password from the CLI
6) type bin then press return
7) type hash then press return
8) type
put
9) login to the CLI of the NCS/PI server
10) type dir disk:ftp and you’ll see the file stored in that directory on the disk
11) if you don’t have a repo pointing to disk:ftp then create one using
a) config t
b) repository localftp
c) url disk:/ftp commands
d) exit
12) type ncs stop
13) type patch install localftp -
Dear Cisco Team,
I would like to know what are the main facts to choose Cisco Prime NCS.
And how many kind of monitoring system are there in Cisco.
Best Regards,
Thet HtarHi Thet,
Cisco Prime Infrastructure simplifies the management of wireless and wired networks. It offers Day 0 and 1 provisioning, as well as Day N assurance from the branch to the data center. We call it One Management. With this single view and point of control, you can reap the benefits of One Management across both network and compute.
Prime Infrastructure enables you to configure and monitor one or more controllers, switches and associated access points. Prime Infrastructure includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
Read the below link for more detail::
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/ovr.html
You can download it from here and use it under evaluation period for testing::
https://software.cisco.com/download/release.html?mdfid=286236028&flowid=72882&softwareid=284272932&release=2.2&relind=AVAILABLE&rellifecycle=&reltype=latest
Thanks-
Afroz
***Ratings Encourages Contributors **** -
Migrate from WCS 7.0.172.0 to Cisco Prime NCS
Is there anyway to migrate off of WCS to Prime NCS? We have a fully built WCS system with maps and all configs and was wondering if there was a way to restore to NCS.
Yes, this is possible. Here is the link from the NCS release notes on the process.
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/release/notes/NCS_RN1.0.0.html#wp83675
Steve -
Is any documentation available for OBIEE Spatial analytics sample??
Hi All ,
We are currently working on creating a demo wherein we want to enable users to drill on various hierarchies over world map. We are trying to achieve the same using SampleApp (v305) but have hit some roadblocks.
We could not find a document that explains the relationship between the tables of the Spatial Schema. Is there such documentation available?
We are unable to understand how is spatial data created and how to represent common sales analytics data using spatial data?
Is there any document explaining the steps taken to build the sample application map reports?
Is there a way to alter/customize spatial data based on specific requirements i.e. Interchanging certain cities within States etc?
Any help on the above issue ???It is out now
http://developer.microsoftband.com/ -
Cisco Prime NCS 1.3 Licensing issue
Hello,
I am installing Cisco prime NCS x 2 servers. I downloaded the licenses which are ordered allong with the devices as follows.
Product Name : L-PI12-LF-50-LIC
Product Description : L-PI12-LF-50-LIC:Prime Infrastructure 1.2 - Lifecycle - 50 Device Lic PAK
Product Qty : 1
UDI : PID: PRIME-NCS-APL-K9
The issue is, the NCS appliance was not started properly and then I used the CD which came along with the server (NCS 1.3). Now my system is up and running but it is NCS 1.3 and when i upload the licenses, it shows that the UID is not matching with the system. Is this because the licenses are issued for NCS 1.2 and my system runs on 1.3? If so, what do you suggest, do i need to download NCS 1.2, install it, add the license and then upgrade to 1.3?
Thanks for your advise,
Regards
JayPrime Infrastructure has a support forum at:
https://supportforums.cisco.com/community/netpro/network-infrastructure/network-management
Please post this to that forum to reach PI experts.
Regards -
Cisco Prime NCS 1.2 Harware Appliance Problem
Hi,
we are trying to install Prime NCS hardware Appliance for fist time, but during starting ncs service it gives an error writen below.
isco-Prime-NCS/admin# ncs start
Purging PurgeSAMPollerRecods
{Fri Jun 21 08:28:03 UTC 2013} ===================================================
{Fri Jun 21 08:28:03 UTC 2013} =========Issuing dbadmin -v start=================
{Fri Jun 21 08:28:14 UTC 2013} =======executing delete sql script sam_poller_jobs_cleanup.sql====
{Fri Jun 21 08:28:15 UTC 2013} ==========Issuing dbadmin -v stop=================
{Fri Jun 21 08:28:27 UTC 2013} ===================================================
Completed purging SAMPoller Records
As first time is not present - removing .dbCreated
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
and it didn't continue, I need helpMehmet Kilic:
The SAM Poller records issue is not the root of the problem. That's a red herring, and internal bugs
CSCue91439 sam_poller_cleanup script should be removed has been filed to have that verbiage and
CSCue60860 ncs start displays debug messages which are unnecessary have been filed to have those messages hidden.
The "As first time is not present - removing .dbCreated" message indicates that there is no database present, and that the necessary Oracle scripts to create a database and the necessary tables have to run.
If this is an appliance, shipped from a factory with a hard drive that has magnetic representations of 0 and 1 on it, it's entirely possible something happened to something to the data in transit. When in doubt, it's easy enough to download the .ISO (NCS-APL-1.3.0.20-1-K9.iso), burn it to a Dual Layer DVD (in a Dual Layer DVD burner) and reimage the appliance. That puts everything back to square one and completely rules out the possibility of anything being corrupted. -
I am running Cisco Prime NCS 1.3 and I have two questions that I hope someone can help me out with.
Question 1). Is it possible to forward the Rogue Device Logs back to our SIEM server? If so how?
Question 2). How do I setup the Mail Server Configuration? The part I am stuck on the is the Primary SMTP server. For the username and password don't know what username and password I should use. Should I use the account I am logged into NCS prime ?
Thanks for any help or input.
WeissWeiss,
Re your first question. Prime itself cannot forward syslogs messages it receives. You may need to setup your wireless controller to use a secondary syslog server as your SIEM server.
Re the second, username and password is optional and only used when your mail server does not allow unauthenticated users from relaying mail.
If it allows that, you can leave those fields blank.
If it does require authentication, you should have a service account created on the smtp server for use by Prime when sending outgoing mail.
Maybe you are looking for
-
How to create a multi select drop down filed in crm 7.0
Hi All, I need to create a multi select drop down field in crm web ui where one field have 7 value and we can select more than one value at a time.I have no idea how to create a multi select drop down field in web ui. Please help.....
-
How to Read data from a table which is defined as a field in another table
Hi Iam working with FM: 'CUCB_GET_CONFIGURATION' <b> Import parameter configuration as a table.</b> <u>but configuration has another table as a field.</u> i want to read the inner table fields. how can i read the table which is defined as field in
-
Lync 2013 On Premises integration with Exchange Online Unified Messaging
I am working on deploying Lync 2013 Server on premises and integrating it with Exchange Online. We do not use Exchange on premises. My question is how to integrate with Unified Messaging specifically. Other functions like Calendar, call logs seem to
-
Thunderbolt display and macbook pro calibration
I have a macbook pro mid 2011 and a thunderbolt display and they both have been calibrated by a Spyder device, I sometimes grade images on my laptop but when I get back to the office the shots look different, any ideas?t
-
Business Logic in Oracle Applications (General Question)
Hello everyone! I am relatively new to Oracle Apps and interested in learning and joining this community. I was trying to figure out how is the Business Logic programmed in E-Business Suite. Is it just PL/SQL or is it BC4J? Is there anyone who could