Prime Update (ubf) stays on Restart Pending

Hi,
I've done a new Cisco Prime 2.0 (single virtual server) installation and saw there were twoupdates to install:
- December Update with bugfixes: pi_update_2.0-3.ubf
- Device package Update: pi_dev_pack_update_2.0-10.ubf
So I uploaded these through the GUI (Administration > Software Update)
as stated in README_for_PI_2_0_UBF_Patch.rtf
I uploaded and installed them. Both came back with Pending Restart 'Yes' and Installed 'Yes'.
So I restarted the system with a ncs stop and start and even tried a reload. And still both stay on 'Yes'.
As per the documentation, after a restart it should be Pending Restart 'No' and Installed 'Yes'.
Also, when I do a show version from CLI it states:
Cisco Prime Infrastructure
Version : 2.0.0.0.294
Any ideas?

Glad you got it figured out. I guess the lesson is completely apply one update or patch before starting on a second - at least for now.
BTW, my updated installation shows the same version as yours from the cli:
prime/admin# show ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.6.003-px-build
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: prime
Version information of installed applications
Cisco Prime Infrastructure
Version : 2.0.0.0.294
prime/admin#

Similar Messages

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

IMac never came back on after installing some updates and trying to restart

I installed some updates and tried to restart, but it was taking for ever so I turned it off from the main power button but sktill does not come back on, it just stays on the first white screen where you see the apple logo and the circle going around!
Very frustrating any ideas how should I start it up again! Should I take it to the shop or is there a way to finally turn on?

Great thank you! It worked after I did that and read the articles you, link, you provided, but I finally did the archive install and have access to previous accounts too except my pictures and videos! It has a small "one way" sign on the folder pictures of the previous user (me) and it says I don't have privileges!
Any idea how can I recover these type of folders onto a new hard drive before I proceed to a new system update?
Thank you

My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

Start up in Safe Mode.
http://support.apple.com/kb/ph14204
Repair Disk Section: "Try Disk Utility"
http://support.apple.com/en-us/HT203176

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

Anyone have no service pop up with the new update and stay like that?

Anyone have no service pop up with the new update and stay like that

Try a Reset holding the Sleep button and the Home button together until Apple logo shows up and then wait for the Reset to return you to the lock-screen. If you still don't have service check Settings>General>About and then scroll down to Carrier and see if your Service Provider is listed.

Just updated my itunes and restarted and now itunes will not open on my desktop.

just updated my itunes and restarted and now itunes will not open on my desktop.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

Firefox always asks to update, I do and 'restart to update' but does not. Everytime I open Firefox it wants to update.

This has been a recurring problem. In the past I have had to manually reinstall Firefox from their website each time new version comes out. But then when the next version comes along, it never updates itself again. I would think installing the new, latest version from your website would fix this, but it does not. Why does the update feature of Firefox never work on my Win & system? Every time I install Firefox I use the same folder, but not the default. I am installing into "C:\Program Files(x86)\Internet Applications\Mozilla Firefox". I would hope your updater would be smart enough to know that, but thought I should share. Everything else should be standard.

I am running Windows7, using only their firewall. I have Microsoft Security Essentials installed as the anti-virus.
I performed the following steps as you requested:
1) Run as Admin:
a. Closed Firefox and reopened “As Administrator”. It again asked permission to run since it was going to try to do the update again. But it just opened normally.
b. When I click on ‘Help-About’ it again says ver. 32.0.2 and downloads a 3.9MB update (again).
c. I click restart to update (again) and it still says 32.0.2 and again downloads the same 3.9 MB update, asking again to restart. So Admin made no difference.
2) Uninstall/Reinstall:
a. Using your link I then downloaded version 32.0.3 (I had to do the same thing on all prior versions, the last full download was 32.0.2. So this problem has been going on for quite some time.
b. I next uninstall both Mozilla Firefox 32.0.2 and Mozilla Maintenance services. I was not asked about removing personal data as you indicated I should have. Since you mentioned that I assume it should have asked. Why not?
c. There was no Mozilla folder under C:\Program Files
d. There was no Mozilla folder under C:\Program Files(x86) (this is where it had put the “Maintenance Services”, even though I had requested to install Firefox under the “Internet Applications” directory.
e. I deleted the Mozilla Firefox folder under C:\Program Files (x86)\Internet Applications (even though this was uninstalled, there were five subfolders left and an .nfo file. Clearly Firefox does not do a clean uninstall). Will this bug eventually be fixed to do a clean install and delete all program folders?
f. I then installed version 32.0.3. By default it wanted to install to C:\Program Files (x86)\Mozilla Firefox.
i. Why is it installing only a 32 bit version when I am running 64 bit Windows 7?
ii. I changed the default to the one I used before (but was now deleted): C:\Program Files (x86)\Internet Applications\Mozilla Firefox.
iii. I did allow it to install the maintenance service again, even though this never works.
iv. After installation there was still no Mozilla folder under Program Files, so it did not install any 64 bit – why not?
v. It did install the program under …\Internet Applications\Mozilla Firefox, as it should have
vi. However, it again made the mistake of installing Mozilla Maintenance Services under C:\Program Files (x86) rather than under the “Internet Applications” submenu as it did the main program as directed. This is an ongoing bug from prior versions. When will this bug ever be fixed so that it is installed in the subfolder selected by the user?
Since this is the same procedure I have to use every time Firefox needs an update, you have not solved my problem. Does anyone at Mozilla care and will get down to the bottom of this? Or should I just delete the Mozilla Maintenance Services since it appears it is not designed to function (at least not in Windows7)?
I have performed the exact steps you indicated and provided you with the steps and the results. Please answer all six questions above. I had highlighted them bold so you could see them, but your web reply stripped the bold, spacing, tabs, etc. and made the above less readable. Also, the Bold in your web reply also does not work - it only put quotes around and would not bold. Since your web response bold does not work either, please carefully find the six questions and answer them. Most importantly I would like to know a fix to this ongoing problem of the updates not working. I am tired of doing this entire process for every little update. Thank you.
Bill

Updates asks me to restart, but when it restarts, the same update is still there

When I go to my app store, it says an update is required for OS10.8.4, I clicked update and said a restart was required. I restarted it and the same update is still shown in my app store update. whenever I click on update, it immediately says to restart the computer, which I do and we go through the same thing again. I can't think what else I need to do.
I am new to Mac, and tbh when it comes to computers I am generally stupid. Please help a computer dummie. Thanks

Try downloading the update manually. With system issues present i'd recommend the combo update: http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
While that update is downloading open Disk Utility which can be found in Application > Utilities folder. Select your hard drive partition and click 'repair permissions'.
As any OS update can be pretty invasive under the hood and the outcome can be unexpected on a system that is having issues (big or small), a backup is recommended before applying an update

Reports stay in a pending state

Hi all, I'm hoping to find a little bit of help in regards to an issue I'm having on a Crystal Reports XI R2 server. When reports are scheduled now they stay in a "pending" state and don't run correctly. I've verified that all the servers (they're all on one physical machine) are started and have rebooted, too.
I get a couple of errors in the event viewer:
Event Type:     Warning
Event Source:     BusinessObjects_jobserverchild
Event Category:     Transport
Event ID:     34700
Date:          10/1/2008
Time:          4:32:05 PM
User:          N/A
Computer:     CR-SERVER01
Description:
Transport error: Communication failure.
Event Type:     Warning
Event Source:     BusinessObjects_w3wp
Event Category:     Transport
Event ID:     34700
Date:          10/1/2008
Time:          4:32:32 PM
User:          N/A
Computer:     CR-SERVER01
Description:
Transport error: Communication failure.
I've setup a trace but didn't see anything that stood out as an issue, although I certainly could have missed something. Any hints on steps I could take to get the reports publishing again?

well if you need help right away you should open a message with support and get an engineer assigned. I don't normally work on reporting issues so not much help I'm afraid.
You said the servers are started but are they also enabled in CMC? CCM?
The issue could be from the CMS or job server, did you trace both? The CMS is responsible for sending the job to the job server (at which time it should go from pending to running).
Regards,
Tim

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I have the same problem with the right click and do not have the ask toolbar installed on my system?

Every single extension I have is broken. Uninstalling and re-installing doesn't work either. They say they'll be updated when Firefox is restarted, but I can't even open the preferences for each plug-in.

Not a solitary extension is working. Many of them say that they'll be updated when Firefox is restarted; some of them ostensibly appear to be working, but clicking on the 'preferences' button provokes no response. I have Firefox 3.6.13. I've tried uninstalling and then re-installing one of the extensions (Stumbleupon) but to no avail. Do I need to be re-installing Firefox here?

This can happen if one of the files that stores details on installed extensions is corrupt. To fix that see the section on corrupt extension files in the [[Unable to install add-ons]] article.

I am unable to make or receive calls after the 6.1 update. I have restarted, restored and reprogrammed without any positive results.

I am unable to make or receive calls since I completed the 6.1 Apple update. I have restarted, restored and reprogrammed without any positive results. I hope that someone can assist me.
Thank you in advance! I appreciate your help!

Thank you! I went to the Verizon Wireless Store and everything is okay with regard to my carrier.

Prime Update (ubf) stays on Restart Pending

Similar Messages

Maybe you are looking for