Principal differences between EP5 and EP6

Hi all.
I need some documentation about the principal differences between EP5.0 and EP6.0.
Thanks all.
Any help is awarded

Hi,
Refer to this Thread https://www.sdn.sap.com/irj/sdn/thread?forumID=41&threadID=109948&messageID=1230511
This shuld help u in understanding the basic differences.
Also the spacing in tray have been included.For more details refer <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/f7/cdfc40b2c7f96fe10000000a1550b0/frameset.htm">Spacing in Trays between EP5 and EP6</a>
Hope it helps,
Regards,
Nagarajan.

Similar Messages

Differences between EP7 and EP6 versions

Hi Everybody,
Could someone let me know the differences between EP 7 and EP 6?
Thanks,
Sridar.

Hi Sridar,
This blog details most of the differences:
Netweaver Portal 6.0 Vs 7.0 - Delta Features 1 - Netweaver Portal 6.0 Vs 7.0 - Delta Features 1
Thanks,
GLM

Teamviewer - All positions in Org Unit display depth between EP5 and EP6

We are in the process of upgrading our HR Portal from Version 5 to Version 6 (SP14) and have encountered an issue with the Team viewer functionality.
In our EP5 system when the user selects the dropdown option for 'All positions in org unit' it is picking up our Configuration limiting it to showing only 3 structure levels and when an attempt is made to display lower levels the expander changes but no more levels are shown (e.g. Expander icon changes but does not render the lower level).
In our EP6 system when the user selects the dropdown option for 'All positions in org unit' it is ignoring the same Configuration and lets the user select down to the bottom of the organisation. This will obviously have serious performance implications and so must be corrected if we are to implement this upgrade.
To test the situation we deployed the following par files from our EP5 system to our EP6 system and found that we achieved the required result of only allowing the configured levels to be shown:
com.sap,pct.hcm.objectanddatprovider.par
com.sap,pct.hcm.orgmanagementeventing.par
com.sap,pct.hcm.teamviewer.par
This points to an issue between these files from the EP5 version to the EP6 version.
Has anyone else experienced an issue with how the EP6 teamviewer handles the 'All positions in Org Unit' selection, and if so can you let me know any solution you have to it?
(Note: This selection used Eval Path MDTSBESX)
Message was edited by: Steve Caffrey

Hello Sandeep,
Unfortunately the only standard functionality is to change the rankings of the positions within transaction ppome. Therefore you have the buttons 'Move up in rank' and 'Move down in rank' in the overview area of the ppome. As you know if the field PRIOX in the table hrp1001 is empty, the transaction sorts the positions by OBJID. So perhaps you could create a abap program to change this standard functionality to insert values into field PRIOX for the corresponding relationship in HRP1001 that you want to sort.
Best Regards
Christine

KM feature difference between Netweaver and EP6 SP2.

Folks,
I need to come up with advantages of upgrading our EP6 SP2 ) environment to Netweaver stack. . I have heard a lot about it. I now need to document this.
Now I want to make a solid case of this to my Management and get their buy in.
Where can I find information where I can get a comparison primarily from a KM standpoint, and overall portal feature set.
Based on this I have to come with a ROI model that will help us migrate to Netweaver stack.
Any help would be appreciated. And I promise to return and reward the answers. thanx rj.

Pretty much everything is explained in here:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf">SAP NetWeaver Process Integration 7.1 Overview of New Capabilities</a>
I think there's a weblog with a concise list somewhere, but I dont have the link saved.
Hope that helps.
James.

Architectural differences between Ep5.0 and Ep6.0

Hi Expert,
Is there any document that specifies the differences in the EP5.0 and EP6.0 architecture.
It seems that the only difference is just the switch framework containing the extension set and Industry Solution extension...it looks very strange!
Have you any idea about other differencies?
Many thanks in advance
Fabio

Hi Fabio,
The difference between EP5 & EP6 is that there is no PDK beneath EP. The "PDK" for EP6 is a business package (a role with some content) to import into EP6. From there, you can upload components (PAR files), delete them etc., and you have the doc's that you know from PDK 5.0.
There is also a different Eclipse plugin.
Portal components for EP5 and EP6 differ in many points, for example there is a xml deployment descriptor in EP6 where in EP5 you had the profile property files.
Also some APIs have changed.
But you can import EP5 par files into Eclipse with the EP6 plugin.
Regards,
Pooja.

Principal difference between an Idoc and a Switch document.

Hello
what is the principal difference between an Idoc and a Switch document.
Thanks

Hi,
A switch document documents a process, such as, switch of supplier, in a liberalized market and can be monitored with own transactions. The process steps are usually controlled by workflows.
An IDoc is used to transfer data from one system to another one in a predefined package. When you import an IDoc containing a market message, a workflow can be started creating/updating switch documents.
Kind regards,
Fritz

Difference between Ep5.0 and Ep7.0

Hi ,
Can u tell the Difference between Ep5.0 and Ep7.0(Briefly)
and send me some related docs.
Regards,
Girish

Girish,
You can check that posted by Rahul in here.
http://rahulursportal.blogspot.com/2008/01/flavor-of-ep.html
Just click on the image to enlarge.
Good Luck!
Sandeep Tudumu

What is a difference between MB01 and MBST for GR Cancellation

Hi,
What is a difference between MB01 and MBST for GR Cancellation.
Regards,
Aditya

Hi,
MB01 is used for doing the GR for collective PO at a single instance.
This transaction will be utilize when an individual needs to create a material document. A material document can only be displayed or changed after it has been generated in the SAP system. In a computer based inventory management system, the principal of "no posting without a document" applies. A material document is generated and stored in the SAP system for every transaction that causes a change in stock.
As mentioned, when a goods movement is posted a material document is created. It serves as proof of the movement If the movement updates a G/L account; an accounting document is also created. The material and accounting document s are identified by unique document numbers
Once you have posted a goods movement, you cannot change material numbers, quantities or account numbers in the material document. You can however use the Change command to enter additional or change text information such as comments or references. To reverse the movement or change a quantity, a new transaction must be performed.
MBST:-
Perform this transaction when a previously performed goods issue must be cancelled due to an error in data entry or other circumstances deem the previous transaction unnecessary.
Prerequisites:-
A previously played transaction that requires cancellation.
An existing Material Document in SAP.
This Transaction will be utilized when an individual needs to cancel a material document due to a data entry error or other circumstances deem a previous transaction unnecessary. A material document can only be cancelled after it has been generated in the SAP system. A material document is generated and stored in the SAP system for every transaction that causes a change in stock.
Performing this transaction will "undo" a previous transaction by reversing individual line items in a material document or by reversing an entire material document. This transaction will reinstate the affected cost center, purchase order or stock location to the state they were in prior to playing the original transaction.
Regards,
Archit

Difference between Null and null?

What is the difference between null and NULL?
When is each used?
Thanks,

veryConfused wrote:
There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion.

Difference between GUI_UPLOAD and WS_UPLOAD

Hi,
Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
Thanks,
Satish

I would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES.   Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
         exporting
              filename                = filename
              filetype                = 'ASC'
         changing
              data_tab                = iflatf
         exceptions
              file_open_error         = 1
              file_read_error         = 2
              no_batch                = 3
              gui_refuse_filetransfer = 4
              no_authority            = 6
              unknown_error           = 7
              bad_data_format         = 8
              unknown_dp_error        = 12
              access_denied           = 13
              others                  = 17.
Regards,
Rich Heilman

Difference between char and varchar, also the difference between varchar2

Hi,
Can anyone explain me the difference between char and varchar, and also the difference between varchar and varchar2...

Varchar2 is variable width character data type, so if you define column with width 20 and insert only one character to tis column only, one character will be stored in database. Char is not variable width so when you define column with width 20 and insert one character to this column it will be right padded with 19 spaces to desired length, so you will store 20 characters in the dattabase (follow the example 1). Varchar data type from Oracle 9i is automaticlly promoted to varchar2 (follow example 2)
Example 1:
SQL> create table tchar(text1 char(10), text2 varchar2(10))
2 /
Table created.
SQL> insert into tchar values('krystian','krystian')
2 /
1 row created.
SQL> select text1, length(text1), text2, length(text2)
2 from tchar
3 /
TEXT1 LENGTH(TEXT1) TEXT2 LENGTH(TEXT2)
krystian 10 krystian 8
Example 2:
create table tvarchar(text varchar(10))
SQL> select table_name,column_name,data_type
2 from user_tab_columns
3 where table_name = 'TVARCHAR'
4 /
TABLE_NAME COLUMN_NAME DATA_TYPE
TVARCHAR TEXT VARCHAR2
Best Regards
Krystian Zieja / mob

The difference between Lion and Mountain Lion

Can some one explain to me the difference between Lion and Mtn Lion? I'm currently 10.6.8 Is it beneficiall for me to upgrade?

Mountain Lion is an enhanced version of previous OS X and so that is Mavericks.
About upgrading it all depends on what your needs are and if your hardware supports it.
System requirements for OS X Lion
System requirements for OS X Mountain Lion
OS X Mavericks: System Requirements
Please check also applications compatibility. From Lion onward, you cannot run PPC application.

The difference between N80 and N80IE ?

What is the difference between M80 and N80ie?

02-Jan-2007
07:45 PM
korngear wrote:
The Nokia N80 Internet Edition is a new version of this handset with the same hardware as the normal N80. It is due for release in Q4 of 2006 and will be available in Patina Bronze or Pearl Black, and has the following additional software included.
Yahoo Go! for Mobile
Flickr
Some Amazon Branded Software
'Download!' App management
Internet Telephone - SIP VOIP Frontend
WLAN Wizard
Gizmo VOIP - Gizmo Project VOIP Frontend.
\\en.wikipedia.org//
@Korngear
Thanks.
Could N80 be upgraded to N80IE?

The difference between SFP+ and X2

Dear Expert,
I need to know what is the difference between SFP+ and X2! and can I use SFP+ card and module instead of X2?
Thanks,
Mohammad Saeed

Hi,
They are both used for 10Gig interfaces. The difference is the connector type.
SFP+ is LC and X2 is SC.
You can not put an SFP+ into an X2 slot or X2 optic into a SFP+.
HTH

Difference between ok_code and sy-ucomm

Hi,
Can any one tell me the difference between ok_code and sy-ucomm

Hi,
Actually OK_CODE and SY-Ucomm are the same. But experts suggest use of OK code for following reason:
In each PAI event that a user triggers by choosing either a pushbutton on the screen or an element in a GUI status, the corresponding function code is placed into the system field SYST-UCOMM or SY-UCOMM and placed in the OK_CODE field (as long as the function code is not empty). Empty function codes are placed in neither the SY-UCOMM field nor the OK_CODE field.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.

Principal differences between EP5 and EP6

Similar Messages

Maybe you are looking for