Print 11x17 on HP Officejet 7610

I recently purchased a Officejet 7610 and the print options are mostly for Japanese documents and 11x17 paper isn't listed as a print media.

Hi psm6513, First of all thanks to you feedback on the printer. If you go to the link below, it is confirm that the Officejet 7610 is able to support A3 or 11X17 printing.http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03618348-5%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken May I know which software you use to print the 11X17 paper? Are you planning to print or plain media, photo or brochure?There are several media can be selected if you are printing plain media using microsoft office such as Tabloid 11X17 or A3 297x420mm (11.69" x 16.54")

Similar Messages

HP Officejet 7610 randomly printing off center.

The header says it all, when printing one copy will be perfect, then the next comes out off center towards the right of page. Does it randomly whether printing one at a time or in multiples. Many more prints come out off center than not. Have updated firmware and drivers, still no luck. Printer is communicating wirelessly.

Hello , and welcome to the HP Community! I hope you have a pleasant experience with us. I understand you are having an issue with off center printing on your HP Officejet 7610 Wide Format e-All-in-One printer. I'd love to help you with this. The first thing I would suggest, would be to make a multiple page copy on the printer itself. This will tell us if the issue is being cause by the printer hardware. If the copies print without issues, then I'd recommend making sure you have the most recent version of the HP software installed for your printer. You can download the software here - HP Officejet 7610 series Full Feature Software and Drivers If the copies are still off center, than we are most likely dealing with a hardware problem and I have a few suggestions. Please follow the steps in this document to check for jammed paper or obstructions in the paper path:A 'Carriage Jam' Message Displays for HP Officejet 7610 Wide Format e-All-in-One Printer Series (H912) I'd also recommend uninstalling and re-installing the ink cartridges. You should also try to align the printhead manually from the front panel of the printer:From the Home screen on the printer control panel, touch the Right Arrow (), and then touch Setup ().Touch Tools, and then touch Align Printhead.Wait while the printer aligns the printhead and then prints an alignment page.Please respond to let me know if we have resolved your issue!Have a fantastic day.

ADF Not Working HP Officejet 7610

When trying to scan or copy multiple pages it only signals the glass to copy or scan.
Went through all troubleshooting found here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01728503&tmp_task=solveCategory&cc=id&dlc=en&lc...
It does the make the beep noise so it's reading that the pages are loaded but still tries to scan from the glass.
Nothing worked. Still cannot scan or copy from the ADF.
This is a replacement printer to one that had an ink system error. I'd hate to have to call HP, go through all the steps I've already gone through twice, wait for a new printer and return the old one again.

Hi @geno0010,
Welcome to the HP Forums!
I see that your ADF is not working with your HP Officejet 7610 printer. I am sorry to hear this, but happy to help!
Three more suggestions to try:
Make sure the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Firmware update. Getting Printer Updates for HP Officejet 7610 Wide Format e-All-in-One Printer Series.
Try the steps within this video as well. Fixing ADF Paper Pick-Up Issues - HP Officejet 7610 All-in-One.
If these suggestions do not resolve the issue, then I would recommend to please call our phone support at 800-474-6836 for your replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this works for you!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Why can't I print 11x17 on my HP Officejet 7612? Windows 8

Hello All, I have been trying for DAYS to print 11x17 on my new HP Officejet 7612 Wide Format Printer and to NO avail. I have uninstalled and reinstalled driver after driver and nothing has worked. I have seen on other posts that others with Windows 8 are experiencing the same issue. When on the print screen, 8.5x13 is the largest it will allow me to print. Others have had the same issue. (See Link Below)
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/My-new-HP-Officejet-7610-Wide-Format-can-t-print-A3/td-p/3310431
Could someone PLEASE tell me why Windows 8 OS is so horrible. Just kidding, I just need to know how to get this driver to give me the option to print 11x17 on my WIDE FORMAT printer. Otherwise, this HP Officejet 7612 is going back to the store. Thanks in Advance,JessTandi

Hello JessTandi, Welcome to the HP Forums. I see that you are having an issue when attempting to print on 11x17 paper. What is the software or printing program you are using when attempting to print on this size? Please make sure the size is set in the software and on the printing preferences. We can run the HP Print and Scan Doctor just in case there is an issue with the software. Please feel free to write me back if you have any other questions. Cheers,

HP Officejet 7610 Cannot Scan 11x17

This model says it can scan 11x17 yet this is not an option in the HP scan settings, why?
I'm using windows 8.1
THanks!!

Hello again,
The software that came with the printer is called the HP Printer Assistant. Here is the link to the HP Officejet 7610 series Full Feature Software and Drivers.
Here is the information for HP's Technical Support just in case your require additional assistance. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks again for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Did you download & install the 10.5.8 driver?
http://www.hp4driver.com/2015/01/hp-officejet-7610-driver-download.html

Can't print A3 from autocad 2013 with hp officejet 7610 in win 7 32 bit

I can't print in A3 paper from Autocad 2013 with hp officejet 7610 in win 7 32 bit OS.Printing result is always A4 ussing this software.Other software have no problem printing in A3.An expert tried for three hours to solve the problem but has no luck.I have no problem print in A3 paper in win 8.1 64 bit system with the same software and printer.I think this is a problem of 32 bit driver of hp officejet 7610.Please help me to solve this serious problem.

We're experiencing a similar problem with cad 13 and win 8.1 with 7610 e-all in one printer. always plots a4 or letter size in the middle of the A3 paper. We need urgent help please!!!ı ve tried to delete and re install the printer driver and no response!! ı hva another computer with win 8.1 and cad 13 installed.But we have no problem in this machine ?? I can not understand where is the exact problem? Isn't there any professional to help us ?

High Ink Consumption of HP Officejet 7610 Printer

One technical issue facing of HP Office Jet 7610 printer. High Ink Consumption of printer during copy page per one ink cartridge. Please suggest to how can solve issue…

Welcome to the forums Sandip_Soni,
If I understand correctly, you are looking to use less ink when you make a copy from your Officejet 7610.
If this is the case, you can select to "lighten" the copies under the Copy and Settings menu, or select to make your copies in "Draft" mode from the Quality option in the Copy Menu on the printer itself when you copy.
I hope the options help you!
Have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

OfficeJet 7610 frequently runs printer maintenance that takes minutes and uses ink

Ever since I got this printer, it has run frequent printer maintenence just about every time I go to print a page. This in itself would not be a total problem aside from the waiting, but it seems to use up ink. I have printed only one color page since I got the new ink cartidges. Every time it does maintenence, it uses more color ink. I am already getting messages saying I need to replace the Cyan. This is rediculous! Is this normal?
This question was solved.
View Solution.

Hello @DarinP1965,
Welcome to the HP Forums!
I understand your Officejet 7610 runs printer maintenance and uses ink. I will do my best to assist you! Just to let you know, usually when a printer keeps cleaning the printhead, it indicates something is wrong with your printhead.
I would recommend following this entire HP document Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
Try cleaning the printhead by yourself a couple of levels to see if this makes a difference. If this doesn't help, then you will have to contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact. Good luck.
I worked on behalf of HP.

Re: HP7610 won't print 11X17 BORDERLESS

I have followed the instructions to print borderless on 11x17 from two software platforms: Acrobat X and Revit 2015. Each time, a portion of the page is printed, then "print cancelled" displays on the printer display and the page comes out half-done and the printer keeps printing half-done pages until I take the paper out and cancel the print.
Thanks!

Hi @padgemi,
Welcome to the HP Forums!
I see that you cannot print borderless on 11 x 17 size paper with your HP Officejet 7610 printer. I am happy to help!
Question for you: What Operating System are you using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, I would suggest going to this post, Re: HP7610 won't print 11X17 BORDERLESS, by my colleague @Sunshyn2005.
Hope this helps, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

OfficeJet 7610 scan to network?

I'm just setting up a new OfficeJet 7610, and if I install the full software on a PC, I'm able to use the Scan to Computer functionality on the device to send a scan to the PC. However, it only works if a user is logged into the PC, and it only directs to My Documents.
We're in a Windows domain environment, and we'd like to set up a file share on our server and have the OfficeJet send the scans to that. Is it possible to adjust the destination of the scan? I've seen some references to a Scan to Network Folder wizard, but that option doesn't appear on the EWS or within the software for our machine.
I've also seen the Scan to Email option, but that doesn't accomplish what we need either, namely, scanning documents directly to a location that multiple users can access.
Thanks,
Bill

Exact same issue here...
Just purchased a brand new Officejet 7612 from Staples and can't figure how to set the "Scan to Network Folder" option...
I also have an Officejet Pro 8600 and the "Scan to Network Folder" option on this one is working perfectly... so the printer scan documents to a shared folder on our QNAP NAS Server (in PDF format)...
However, the Officejet Pro 8600 can't scan wide (11x17) documents, that's why we got the Officejet 7612... but it looks like the 7612 can scan to a computer (where the drivers are installed), or to a USB stick, or scan to email... but I just can't find the "Scan to Network Folder" option... ?
Am I missing something here ?
Thanks,

Officejet 7610 wide format: can't scan legal documents to pdf

I am having a problem scanning legal documents from the ADF and/or off the glass.
only cropped letter size gets created.
I believe I am using newest model with the newest drivers.
Just purchased and installed drivers from the internet.
I need work-a-round or other fix.

There is no setting in the Front Panel to set to Legal. All paper size settings need to be done on the SW. I believe you have installed the overall SW.
Select HP Office 7610 series icon from pc desktop. Otherwise Click > Program > HP > HP Officejet 7610 series to open HP Printer Assistant.
1. Select Set Preferences.
2. Select Paper/Quality.
3. Change Paper Size to Legal.
4. Click OK to save setting.
Now by default the scan target will be scanned to Legal size. Take note by default if there is A4 or Letter siz paper and when setting is at legal, then these paper sizes will be scanned to legal sizes.
Alternatively if you do not want to set the default size to legal, then you can go to HP Printer Assistant. Select "Scan a document or Photo". Select the appropriate settings and do a SW scan.
Remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.

Hp officejet 7610 scan result is blue stripes

i've been having problem with my officejet 7610 which in my case the scanning output for color scanning is all blue stripes and is unusable. Please help, cause i need to scan really important docs.. Thank u for ur help.

Hey there @waskitoputro
Welcome to the forums!
I read about the scanning quality issues you're having with your Officejet 7610 on Windows 8.1 and I would like to help.
Please try these few steps and get back to me with the results.
Power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Check for a Firmware Update: Getting the Latest Firmware and Product Updates
Test a copy from the front of the printer. Was there any issues?
Test a scan from the PC. What did the scan look like?
If there was an issue with the scan only, run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 7610 Software

Hi,
I recently updated my printer to a brand new Officejet 7610. I connected it wirelesly through my Dlink Router. I have a couple of problems though.
1. When printer is in sleep mode and I choose to print Windows 8.1 wont recognise it and say that is Offline. If i try to print through my android tablet it is OK when the printer is on the same state. When I restart the printer it starts printing immediately. The web interface of the printer is working prefectly while on the same time.
2. Printer settings ar poor. Check the Image below.
I annot get the full features out of my Settings.
My Previous printer HP Officejet 8500 909 which btw was perfect in every aspect had a full feature printing dialoge allowing you to use every printer option.
How I can solve my problems? How I have a full feature printing dialog?

Hello M_George,
Welcome to the HP Support Forums!
I understand you have some concerns with the new printer, the Officejet 7610, not performing to its full ability. When you installed the printer on the Windows 8.1 computer, did you use the C.D that came with it?
Those two issues could be the result of the Windows Class Driver being used for the 7610 and not the Full Feature Driver. To check this, open Devices and Printers, right click the printer and then click Printer Properties. Click the Advanced tab and the you will be able to see the driver being used.
Running the Print and Scan Dr will test the software installed and let you know if the full feature software is installed. Also, if you run the Print and Scan Dr while it is unresponsive, it may point to a cause and help resolve it.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet 7610 margins are too big on my Mac

I'm on my second OfficeJet 7610 Wide Format, because HP couldn't fix this problem the first time, so they assumed it was a hardware issue. I don't think it is...
The default margins for this printer are as small as 0.13 inches (3.3mm) based on the specifications. I use a Mac that runs Maverick. I have no issue printing, only that I haven't found a way to reduce the margins down to the default dimensions above. The top and bottom of my prints cut everything off smaller than 0.60 inches. This is a real issue with PDFs, forcing me to chose the "shrink oversize pages" in order to not have the tops and bottoms cut off. I should be able to print at "actual size".
How can I change these margin settings globally?? Making manual margin adjustments in programs like Word, still cut off the tops and bottoms for anything smaller than 0.60 inches. Please help!!

What worked for me was selecting index card 8.5x11 on the mac print paper select options

Print 11x17 on HP Officejet 7610

Similar Messages

Maybe you are looking for