Print a pdf file with dot matrix printer epson lx 350

Hi every body, I've a problem with my dot matrix printer. If i want to print a pdf file, the writers are not in a good format. please help me.
Excuse if question is not correct it's not depend for me because i'm not an english but french. Thanks!

Bonjour je m'excuse beaucoup pour poster dans un premier temps en anglais. Je ne savais pas que c'était possible en français.
Voici mon problème: J'ai une imprimante matricielle de type EPSON LX-350 et je souhaite imprimer des fichier PDF (Adobe reader). Mais la police qu'elle sorte est différente de celle attendue après impression et pourtant avec un fichier Word ou Excel je n'ai pas ce problème de format de police. Alors la question est: est t-il possible d'imprimer sans probléme avec une imprimante matricielle un fichier PDF si oui qu'est comment doit procéder. Existe t'il quelqu'un qui l'a déja essayer et avec quelle marque d'imprimante.
Merci de votre disponibilité.

Similar Messages

Problems to print from Flex to a dot matrix printer

I'm having problems when a try to print from Flex in a dot
matrix printer. With ink jet printer there's no problem-
the problem is that it shrinks the printing, and adds a
column of dots at the end. I mean it splits the page in 2, first
the shrinked data, and on the other side, a column of dots, i don't
know if this is a problem between Flex and dot matrix
printers.

Airprint Basics: http://support.apple.com/kb/ht4356
Your printer does not appear to be AirPrint capable so you may need to use a software print server that runs on your PC or Mac like http://www.ecamm.com/mac/printopia/.
Lexmark also has an App that may help:
https://itunes.apple.com/us/app/lexmark-mobile-printing/id469415392?mt=8

Can't print a pdf file with adobe reader 10.1.12 on a Windows Server 2012 R2 RDS session

Situation : My users are connected with RDP on a Windows Server 2012 R2 Datacenter Remote Desktop Service and when they log on, their share printers are installed.
When some users open a pdf file, they can't print it. When they try to print a file, nothing happen... No file sent to the printer...
I have seen a difference between the shortcut icon of adobe reader for users who have this problem and others.
No Problem :
Problem :
If someone can help me
Thanks !

Hi Ajlan,
To fix my problem, i uninstalled adobe reader X with "Adobe Reader and Adobe Acrobat Cleaner Tool", rebooted the server, installed Adobe Reader XI and rebooted again.
For some users, this fix the problem but with some others i had to define Adobe Reader by default again.
I tried without use "Adobe Reader and Adobe Acrobat Cleaner Tool" before and adobe reader X wasn't really uninstall.
Thanks,
Regards,
Sullyly

Output a shaded box in SAPScript with Dot Matrix Printer

Hi guys,
Is there a way to print a shaded box in Sapscript using Dot matrix printer?
BOX XPOS '4'CM YPOS '2.8'CM WIDTH '2'CM HEIGHT '0.4'CM FRAME 10 TW INTENSITY 100
I tried the code as above but it wouldn't work, and doing a search on this forum tells me box command wouldn't work on dot matrix printer. So is there any alternative to do this?

Hi
if it is possible try to print the same in another printer and confirm the problem
no doubt certain printers may create such problems while printing the output
so to confirm the problem try with other printer.
Reward points for useful Answers
Regards
Anji

Smartforms Printing not coming properly in dot matrix printer

Hi Gurus,
We have implemented invoice printout using smartforms and required to use the dot matrix printer for printing.
We are now facing the problem on the printout from dot matrix is different from the preview we get in the system. But the printout from Laser Jet is coming out correctly for the same smartforms.
We are using EPSON DLQ3000 and we configure the output device using EPESCP2 as the Device Type. The problem is font size of the print out is all printed as courier size 12, but there are different font sizes in the smartforms.
But when we use local printing (using SAPLPD), there is no problem, all different font size is printed.
If we using to same output device to print some sapscript, everything is working well. Font size will print accordingly to the preview of the sapscript.
Do you have any idea of the problem that we have. Thanks for your help.
Regards,
Lee Shi

Dear Lee,
Ideally the printout should come as it is shown in the preview.I remember once it had happened with me too.But in my case there is no problem with the settings at SAP level.When we checked we found the problem is with the printer cartridge.
We co-ordinated with the system administrator and n/w guys.They in turn change the cartridge and issue was fixed.
PS:In my case all SAP printout were coming properly except the smartforms.
Regards,
Ashutosh
Edited by: ashutosh singh on Aug 18, 2008 10:20 AM

Pdf reports with Line Matrix Printer

Dear All,
I am working with oracle reports 10g and printing my reports as pdf on Line Matrix Printer but the output isn't good so we want to know how to generate this report in character mode & can be previewed and printed

Bonjour je m'excuse beaucoup pour poster dans un premier temps en anglais. Je ne savais pas que c'était possible en français.
Voici mon problème: J'ai une imprimante matricielle de type EPSON LX-350 et je souhaite imprimer des fichier PDF (Adobe reader). Mais la police qu'elle sorte est différente de celle attendue après impression et pourtant avec un fichier Word ou Excel je n'ai pas ce problème de format de police. Alors la question est: est t-il possible d'imprimer sans probléme avec une imprimante matricielle un fichier PDF si oui qu'est comment doit procéder. Existe t'il quelqu'un qui l'a déja essayer et avec quelle marque d'imprimante.
Merci de votre disponibilité.

When printing a PDF file, my HP Desljet printer first prints a blank page. How can I fix this?

This only occurs when printing a saved PDF file. Word and other applications work fine on the first try.
PDF Forms

Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved

Printing denied PDF-file with pasword from Sony Xperia LT25i

See the subject.

Hello @ruvmax ,
Welcome to the HP forums.
I understand that you are having problems printing a secured PDF.
I would like to help.
You did not mention what model of printer you have, or how you are sending the print job to it.
Since the Phone is Android 4.1 I can rule out the ePrint app.
The App is only supported on 4.2 or higher.
I am going to proceed under the assumption you are sending the PDF to the printers ePrint address.
I am also assuming your printer supports ePrint.
ePrint does not support encrypted or secured files.
This is why the password protected PDF will not print.
Try saving a version of the document without a password.
Send this version to the printers ePrint address.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Print a PDF file to a Label Printer

Hello in order to save time I am trying to find a way to have an pdf sized so that it will print to my label printer.
I have tried to do this through the print settings but have not made much progress.
My thought/Goal is that I type the address in the beginning of my form and this part of the form is filled in on another page for printing to the label printer. - No problems creating this.
The main issue is either resizing the page to to shrink to the size of the labels for the printer, or scaling the page to fit the size of the labels in the label printer.
Has anyone had experience with this?
Thank you for your time!
JOhn

Do you mean that the information for the label is huge on a letter or A4 page and you want to shrink it to the size of the label, or do you have a small region that you want to print to the label? Your work flow is not coming through at all and it is hard to help as a result.
If you have a label size print on a large page, then crop the page to the label print. Then go to the print menu, select the label paper, set shrink to fit, and print. At least I think that is what you are looking for.

Print in Character Mode on Dot Matrix Printer

Dear All,
When we print any reports from SAP to Dox Matrix printers it comes in graphic mode. So it will take too much time to print and print is also not readable.
Same I want to print in Character mode (Simole reports where graphics are not involved e.g. Financial Ledger, Cash Voucher etc.).
Whether it's required to setup at printer level or at SAP.
Thanks

Hello,
I think this required to setup at printer level.
Regards,
David

Problem with countinuous paper printing in dot matrix printer

Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
     Printer initialization
     Reset after exit
     Cover page
     First Page
     Start of even page
     Start of odd page
     Start of page
     End of first page
     End of even page
     End of odd page
     End of page
     Start of line on an even page
     Start of line on an odd page
     Start of line
     End of line on an even page
     End of line on odd page
     End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
Vishnu

Hi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan

Is there a dot matrix printer that works with iMac

Trying to find an impact printer to do invoices on an imac computer, but no luck so far. Any ideas?
Bill

The Epson Networking Impact Printers are designed for high capacity environments and are Mac OS compatible. The IP networking printer drivers built into Mac OS X support the IP Network dot matrix printers, both 9 & 24 pin.
For example, for the FX-890N Networking printer you can use the driver "Epson 9-Pin Series" as shown below:
Epson's full-featured, FX-890N Networking printer offers the durability and ease of use required for essential daily printing. This 9-pin, dot-matrix, narrow-carriage workhorse boasts an MTBF rating of 20,000 power-on hours (POH) and speeds of up to 680 cps (characters per second). Engineered for seamless integration, the FX-890N's interfaces include an internal 10/100 Base-TX Ethernet print server with support for Macintosh OS X.
Its easy-to-install 7.5 million-character ribbon cartridge boosts productivity and ensures a low cost per page, while its 400 million-character print-head life heightens its dependability. Included Epson Remote Configuration Manager software simplifies printer setup and setting selection. Ideal for rugged environments, the printer is a perfect drop-in replacement for the Epson FX-880/880+/980 or Okidata Microline 320/320 Turbo. It handles forms up to seven parts thick via four convenient paper paths, and its redesigned control panel features a lock-out mode and other intuitive functions. The printer is Novell tested and approved and is backed by Epson's comprehensive three-year warranty with technical support. The Epson FX-890N offers the durability and ease of use required for criticaldaily print requirements. Speeds through multipart forms,reports, labels and more at up to 680cps.Offers an MTBF rating of 20,000 POH and a 400 million character print head life.. Includes 10/100Base-TX Ethernet Interface for easy networking.
Printing Method: 9-pin, impact dot matrix
Print Speed:
Ultra Speed Draft: 680 cps (12 cpi); 566 cps (10 cpi)
High Speed Draft: 559 cps (10 cpi)
Draft: 419 cps (10 cpi)
Near Letter Quality: 104 cps (10 cpi)
Characters & Lines
Character Sets:
13 character tables
13 international character sets
Resident Bitmapped Fonts:
Ultra Speed Draft: 10, 12 cpi
High Speed Draft: 10, 12, 15, 17, 20 cpi
Draft: 10, 12, 15, 17, 20 cpi
Near Letter Quality (Roman / Sans Serif): 10, 12, 15, 17, 20 cpi, proportional
Bar Code Fonts: EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET, Codabar (NW-7), Industrial 2 of 5, Matrix 2 of 5
Characters per Line: 80 characters at 10 cpi
Line Spacing: 6 lines per inch default
Formatting:
1/6-inch or programmable in 1/432-inch increments
8 lpi option available on FX-890 Okidata Mode only
Paper Handling
Forms: Continuous multipart, original plus 6 carbonless copies, 1 + 6 copies with pull tractor, maximum thickness .018"
Envelopes:
No. 6 envelopes: 6.5" x 3.6"
No. 10 envelopes: 9.5" x 4.1"
Width:
Single sheets: 3.9" to 10.1"
Continuous: 4" to 10"
Cut-sheet feeder: 7.2" to 8.5"
Length:
Single sheets: 3.9" to 14.3"
Continuous: 4" to 22"
Cut-sheet feeder: 10.1" to 14"
Labels: Minimum: 2.5" x 0.94"
Roll paper: 8.5" width
Paper Feed Speed:
62 millisecond per 1/6"
5" per second, continuous feed
Paper Path:
Manual insertion: Front or rear in, top out
Cut sheet feeder: Top in, top out
Tractor: Front, rear or bottom in, top out
Pull push tractor: Front or rear in, top out
General
Printer Language :
Epson ESC / P
IBM PPDS
Okidata Microline (FX-890 Okidata Mode only)
IP Networking Interface:
EpsonNet 10 / 100Base-TX Ethernet Print Server
Input Buffer : 128 KB
Control Panel: Functions: Font, pitch, pause, tear off, bin selection, line feed, form feed, load, eject, micro adjust, top-of-form adjustment, panel lockout, reset, menu, default setting selection
Sound Level : 55 dB(A) (ISO 7779 pattern)
Rated frequency range : 50 – 60 Hz
Input frequency range : 49.5 – 60.5 Hz
Dimensions : 16.3" x 13.8" x 6.6" (W x D x H)

Adobe print form on dot matrix printer

Has anyone tried to print adobe forms into a dot matrix printer i.e. printing multi-part documents. I've read that the device type supported are PostScript, PCL, PDF and ZPL. The help file specifically mentioned that SAPWIN device type won't be supported, but it does not mentioned explecitly weather ASCII device type or device type for dot matrix/impact printer is supported or not.
I'm still holding up hope that adobe print forms scenario will be able to do this since we are planning to go ahead with 100% adobe form solution.
Any info would greatly appreciated.

The supported output formats of ADS are PostScript, PCL, PDF and ZPL. That means that your printer has to support one of the mentioned formats to be supported. So the answer to your question is no.

Printing Barcode in Dot Matrix Printer

Dear Experts,
We have developed Smart form to print Barcode and it's printing fine in LaserJet printer & readable by the scanner, We need it on Dot Matrix printer for (multiple copies) and tried the same with Dot Matrix printer it use to print but not readable with scanner.
SAP Transaction - MIGO (GI Posting)
Dot Matrix Printer - Epson DFX9000 & Oki data PACEMARK 4410
Please help me to Print Barcode in Dot Matrix printer through Smart form.

There is something I don't understand: if the barcode printed is visually correct, and exactly the same as with a laser printer, why do you want it would be better with a PDF (especially on a dot matrix printer).
Could you also tell us what symbology you use, and do you use smart form new barcode technology?

Portrait on 14" width by 11" length continuous feed paper for Dot Matrix printer.

Hello,
I am trying to set the properties of a Report Builder 3.0 form for Portrait orientation with 14" width by 11" length continuous form. The report will print on a high speed dot matrix printer. My problem is when I change the report property
to 14" width by 11" length, Report Builder 3.0 automatically changes the Orientation to Landscape! I want it Portrait on 14"x11" paper!
Thanks in advance.

Hi CRC111,
According to your description, when printing reports in dot matrix printer, it can't keep the Portrait in report property. Right?
In Reporting Services, it supports printing in a dot matrix printer. However, the dot matrix print is quite different from regular printers. It has reported it can't accept the page layout(landscape and Portrait). In this scenario, we suggest you export
the report into PDF/TIFF, then print it in dot matrix printer. Please refer to the links below:
SSRS Printing to Dot matrix printer
Reporting by using Dot Matrix Printer
report properties for dotmatrix report in SSRS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Print a pdf file with dot matrix printer epson lx 350

Similar Messages

Maybe you are looking for