Print a Web Template with Web Application Designer 3.X

Hello
I would know how I can print a web template made with Web Application Designer 3.X and that it is in the Intranet.
Actually I'm printing that page with the option of the browser (Internet Explorer) but it print only I see, no print all the chart and the rest of the columns.
How can I print all the data that compose  the web template?
Thank you.

Hello Sharath,
                     First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
hope it is clear,
assign points if useful.

Similar Messages

  • WAD template with BSP Application - how to read selection screen values

    Hello,
    I've created Web template with Web Application Designer (WAD).
    I would like to extend  that page with BSP Application...
    Purpuse of this application is to read some information from tables
    on BW transaction server and display them within Web page.
    Question: How to read selection screen values from a Web template ?
    Thanks for any help,
    Pawel Borowiec

    Hi,
    The selection screen parameters will be on an inputField, so try and get the is of the inputfield generated by doing View source...
    And once you get the inputfield Id, you can read the value in the InputField(InF) by
    using the following code...!
    data : if_value type ref to cl_htmlb_inputfield.
    data : variable type string.
    if_value ?= cl_htmlb_manager=>get_data( request = request
                                                name    = 'inputField'
                                                id      = 'InF_ID_here'
           if if_value->value is not initial.
             variable  = if_value->value.
           endif.
    Hope this helps.
    <b><i>Do reward each useful answer..!</i></b>
    Thanks,
    Tatvagna.

  • How to create a web template with company logo

    how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
    2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
    thanks to you all

    Hi
    1) Please read
    http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
    2) Create a condition in the Query Designer: Use a formula variable
    See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
    Heike

  • Filter Web Template with URL Cmd: doesn't work with compound infoobject ?

    Hello all,
    I've to filter the query contained on a web template with URL command, but it doesn't work.
    The web template contains only one query, and on the free chars I have 0PLANT.
    I call the web template adding to the normal url the following command:
    &FILTER_IOBJNM=0PLANT&FILTER_VALUE=33
    where 33 is the code of the plant I want to filter.
    The command is executed, I think, because the  result is "NO APPLICABLE DATA FOUND". The fact is that when I execute this query on the Bex filtering 0PLANT by value 33 the data exists.
    May be because 0PLANT on our system is in compound with 0SOURSYSTEM ? In this case, what's the value I can use as filter ?
    Thank's in advance,
    Max

    Hi,
    please see http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/frameset.htm
    especially:
    If the variant with ending 'EXT' is selected, the fully compounded value has to be entered in the external format, for example, 24.12.2000.
    If the ending 'EXT' is not used, the fully compounded value has to be entered in the internal format, for example, 20001224 for 24.12.2000.
    and
    In the internal display (see table below) you can easily determine the name of the characteristic and the filter value using the URL parameter &snippet_operations=%20 (see also Object Tag for the Properties of Web Templates). Call the Web application with this URL parameter. If you filter using the context menu, the parameters FILTER_IOBJNM and FILTER_VALUE are automatically added to the URL in the Web browser. You can then use the desired values with Command URLs in hyperlinks.
    Heike

  • Open web template with different language!!

    Hy experts, i have this question: i have a web template and i would create a command that open the same web template with another language.
    I tried to insert a hyperlink with sap-language parameter but in this way navigation properties on table and filter value's aren't maintened in the new web template .
    Could you help me?
    Thank's a lot
    Andrea

    I have done this using iviews in the portal by using
    ie
    Language = ZH in the application parameter
    will fire up the iview in chinese on a hardcoded EN BI portal
    Then you can have the same iview without the language string and that fires in the portal language (if hardcoded) or the personalisation language of the user

  • How to use a Web Template with queries from multiple BW Systems?

    Hi all,
    can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
    Thanks in advance, best regards
    Frank

    Great! Thanks for the quick response.
    Have you tried this for XMLA datasources created within the EP system also?
    i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
    Thanks.

  • Web Templates with Tabs

    Hi, We have quite a few reports we have developed for users that have around 5 or 6 tabs.  When we adding or remove any functionality we have to maintain each of these reports.   Does anyone else have/had this issue and what is a good strategy to move away from Web Templates with tabs?
    Thanks!

    to my knowldge, we don't have any option... we need to maintain every time.
    I can think how complex it is...if you have 5 or 6 tabs... it 's very complex. Going forward... for small change.. like adding new tab etc... you need to be very careful.
    On every call... try to reset to initial every time you call a tab... then try to pass values as per the requirement. ex: Title, Filters, settings, table etc.
    Initial view we will disble every thing... we will one by one... with multiple commands...
    Nagesh Ganisetti.

  • After Effects customize template with web browser?(layer name giving a variable names)?

    After Effects customize template with web browser?(layer name giving a variable names)?
    so many web sites provideing this service ...online intro makers
    please help me .what plugins using .how to setup this kind of service?

    Sir please see these sites...
    (www.makewebvideo.com,
    templates.introchamp.com.....)
    some sites are in online ...these are using AE for render

  • Web Template as web Item

    Hi Experts,
    Can we still use Web templates as an Web Item or not.
    I am not getting Web Template as a WebItem in my Item list.At present I am in BW30B.
    Please suggest if something needs to be done.
    I need this for defining Header and Footer for the Web Template.
    Thanks in advance.
    Regards
    Lalit

    Hi,
    You can use web templates as web items (even save them in a library) in version BW 3.5.
    You can have a look in SAP net online doc:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Any other info?
    LauQ

  • Security for creating web templates using web application designer

    I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
    The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
    Any help would be greatly appreciated.
    Jeff Ehritt
    925 827-6012
    ChevronTexaco

    Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
    The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
    Thanks,
    Jeff Ehritt
    ERP COE SAP BW Security

  • Call a web template with default parameter in  BEx Web Application D

    In BEx Web Application Designer, As in traditional way. Assume that I have a query which have parameters. When I create a web template using this query and excute it. the first page is displayed and I should input the parameters at this page(for example: "Period/Fiscal"). after I input the data and press Enter key. the <b>reporting page</b> is displayed.
    And Now I hope I can run the template at another way: the template should <b>direct go to the reporting page</b> with the preset parameters (for example: "Period/Fiscal = 2005.006").
    thanks

    Hi,
    Alternatively you may use command URL, to enforce the variable value during calling up the web template. For example:
    http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&template_id=yourTemplate&var_name_1=myParameterVariable&var_value_ext_1=4711
    In the implementation you may create a web template that redirect the URL to above reporting link, so the user will directly see your reporting page.
    For detail you may check in the WAD documentation.
    Hope this helps.
    Message was edited by: Eddo

  • WAD: Design request for web template with re-occuring table object

    Hi all,
    I'm trying to create a web template design in WAD (WAS 6.20) using javascript that would loop and re-use the same table web item object displaying different sales employee data. The challenges I'm facing is that the number of employees to report on might be different for the reporting period and the report should have a sales employee specific header preceeding each table. And also the customer is looking at receiving a canned (precalculated) report generated weekly.
    I'm thinking that I could try looping through the 0salesemply characteristic values as displayed from a dropdown box object and pass the individual value as the table object's filter value and hopefully re-generate and render the same table with different filter values until the end of sales employee list of names is reached. Within that same loop, a second table pointing to a different data provider can also display selective data specific to that sales employee.
    My question is would such a design render the same table item multiple times based on the number of 0salesemply values and on a single web page. Would such a design work or would I need to look at designing a BSP application querying the ODS table directly.
    If anyone has any comments on how else I can achieve this or can provide examples of similar design it would be very much appreciated.
    Thank you all.
    Frank
    Message was edited by:
            Frank Goneau
    Message was edited by:
            Frank Goneau

    Hi all,
    I'm trying to create a web template design in WAD (WAS 6.20) using javascript that would loop and re-use the same table web item object displaying different sales employee data. The challenges I'm facing is that the number of employees to report on might be different for the reporting period and the report should have a sales employee specific header preceeding each table. And also the customer is looking at receiving a canned (precalculated) report generated weekly.
    I'm thinking that I could try looping through the 0salesemply characteristic values as displayed from a dropdown box object and pass the individual value as the table object's filter value and hopefully re-generate and render the same table with different filter values until the end of sales employee list of names is reached. Within that same loop, a second table pointing to a different data provider can also display selective data specific to that sales employee.
    My question is would such a design render the same table item multiple times based on the number of 0salesemply values and on a single web page. Would such a design work or would I need to look at designing a BSP application querying the ODS table directly.
    If anyone has any comments on how else I can achieve this or can provide examples of similar design it would be very much appreciated.
    Thank you all.
    Frank
    Message was edited by:
            Frank Goneau
    Message was edited by:
            Frank Goneau

  • Printing on Web - web template with multiple queries

    Hi.
    Trying to print to PDF from the Web, when I have more than 1 query in the web template, using Tabs.
    When the report has been run, if I select the tab for report A and then Print, I need report A to be printed. Similarly, if I have selected the tab for report B I expect report B to be printed.
    Is this possible without resorting to HTML coding direct? If so, can you tell me how, please? I have no problem printing single queries, the issue is how to print different reports without having several Print buttons. If it CAN only be done by HTML coding, could you send me some sample code please?
    As well as offering points for useful answers, I can also offer my Word document where I have broken 0ANALYSIS_PATTERN in to its components, with screenshots... I have found it invaluable.
    Thanks,
    Patrick

    The answer was to use the Tabstrip web item... although I still have to define a set of buttons for each tab, only one set is visible at a time, which is fine

  • Change a web template in  Web Application Designer  3.X

    Hi All,
    I have a web template , when i execute it i get a chart format by default. But i want to change it to table format .Can you please let me know how to do it?.
    I am not able to change the web template .
    Thanks and Regards,
    Sharath

    Hello Sharath,
                         First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
    then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
    hope it is clear,
    assign points if useful.

  • How to add an icon in to web template of web application designer  3.x

    Hi Friends,
    I have to add a new icon in to exsisting web template.
    Please any body can help in this issue ?
    Thanks
    Pedamarla

    Hi Stefan,
    Thanks for your early response.
    As you suggested i have added the image to MIME Repository successfully.
    Now i have to add the new icon to exsisting template.
    Stefan my problem here is
    I have to add new icon but i donot need to change the icon.
    you are giving the procedure how to change the exsisting icon but my problem is i have add new icon with out replacing any one exsisting in the template.
    Thanks in Advance
    Pedamarla

Maybe you are looking for

  • IDOC - JDBC - RNIF SCENARIO

    Hi Experts, Currently i am working on invoice idoc to JDBC(synchronous) to rnif. could you please help me the steps. depending on the bill to or soldto or plant i have to get the 14 fields from sql server and send it to the RNIF adapter. could you pl

  • Documenting means

    Hi Guru's,    In Support Projects        " Documenting the configuration and program modification requirements and developing specifications for customizing " Gurus what does it mean actually.    Plz tell me Gurus its also very urgent for me. Thanks

  • Creating seach help to be used in program as F4 help

    Dear All, I need to create a Search help using two fields, SAKNR and BUKRS. Please help regarding all the parameters. After the search help is created i need to use it in my program so that when the user clicks on SAKNR the value in BUKRS field shoul

  • How to correct no text displayed in "alert();" function?

    Hello AEScriptingComm,                                        you were highly recommended by David of Pro Video Coalition. I hoped you could help using the alert(vals) in ExtendScript in After Effects. When i run the script all works but,.. 1) a) ..t

  • Audio Channels in Timeline

    Can I break out audio channels, or eliminate a R channel once I've dropped it into the timeline? I have separate mics on L and R channels, and want to just choose the L channel mic.  But I failed to set channels on all clips before moving into the ti