Print ALV with merged cells
Hi all,
I have a requirement to print an ALV grid display exactly in the same format as we see in output. That is, if the cells are merged in ALV then in Print also they should come as merged.
But when I am printing the ALV output it does not give merged cells. I am using OO ALV.
Is my requirement feasible. If yes, Please help me to proceed?
Thanks,
Daya
Hi Daya,
In the ALV grid control print or print preview, cells that have identical content are not merged. This is necessary in order to be able to distinguish between blank cells and cells that only become blank after merging. The standard behaviour for the different ALV lists is described in Note 447055.
Regards,
Md Ziauddin
Similar Messages
-
Help with merged cells in table
I'm just learning how to use Dreamweaver 8 and tables. I am
trying to use a table with merged cells filled with graphics --
only one graphic per cell. I make my jpg the size of my cell, which
it seems to fill. Then, when I upload it to view in browser, it
looks as though the graphic doesn't take up the entire cell. At one
point, it was working both in Dreamweaver and the browser. Now, in
the browser view, it looks as though there is extra space above the
graphic and below it. Any suggestions on what is going on???It's not the use of tables with your graphics that is
necessarily the
problem, it's HOW you are using the tables with your
graphics. Can we see
the page you have built so we can examine the code?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"degazon" <[email protected]> wrote in
message
news:gasr2p$10m$[email protected]..
> Thanks! It's now evident that I shouldn't use tables
with the graphics. -
How to hide rows with merged cells?
I would like to know how to hide rows on numbers with merged cells, could do it normally at excel but I am not being able to do it at Numbers.
thanks!Felipe,
To hide a row with Merged Cells, Un-Merge first, then Hide. Select the Merged Cells and Table > Unmerge.
Note that this is only a problem with vertically merged cells when you want to Hide a Row.
If you want to Hide a Column, you can't have a Horizontal Merge that involves that Column.
Jerry -
Table cells - Problem with merged cells
Hi
I was experiencing very weird behavior with my tables until I realized that it was caused by merged cells
My script gives a dialog which allows the user to choose from which column to start and from which row.
As the script iterates through the cells in the selection I was getting weird results
Through using .select() function I was able to see that depending on the column, some times row 5 could be which seems to be row 3!
The reason was because of merged cells in that row
I.e., when some cells are merged together, only the first column of those merged cells is recognized - the others are not
so it comes out that when merging cells from column 3 to 5, column 3 has a cell in that row, columns 4 and 5 do not, and column 6 does!
Is there a way to get around this behavior?
Thanks
DaveyI don't understand the point of your post.
If you're trying to report a problem or "bug" with Pages, that is not the purpose of this user-to-user forum. You should leave feedback for the Pages team on this page.
I've not had a problem opening Word files with tables in Pages. If you're saying Word can't handle tables with merged cells, then don't use merged cells in files you are going to export as Word. Word & Pages must handle merged table cells differently, as I know both can do that. As far as RTF, Pages can open & export as RTF. Again, if you are going to export as RTF, don't use tables. Neither of these is a fault of Pages, just limitations of the formats/programs. -
How can I hide columns that has rows with merged cells?
I'm making a schedule on Numbers and there are couple of rows that are one cell (merged).
Because of this reason when I select a column to hide, it's not just the column that is being selected but the column and the all the merged cells that goes across the row. I would like to hide selected column to print different columns. Please help me! thank you!There is even more powerful tip.
Double click in a cell
Show Rulers
Insert a "center tab"
move it to the right edge of the cell
type option + tab then your wanted string.
You will get that :
Add this tip to the drawbacks of merged cells and you will understand why I never used them.
Yes, it may be surprising but the right tab belongs to the cell D2 !
Yvan KOENIG (VALLAURIS, France) mercredi 8 juin 2011 16:25:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
Hi Experts,
Im creating a ALV Report with icons and so far so good but it's printing the icons...
It's it possible to print a ALV with the icons or it only prints the code of the icon?
Thanks in Advance
Best Regards,
João MartinsIt is not possible in SAP, but you can do a screenshot (PrintScreen button) and the print the screenshot.
-
ALV with colored cell exporting to Excel
Hi all,
I have an ALV-Table in my webdynpro appliation. There are some dropdownbykey fields in the alv and some cells are colored.
After export to excel the colored cells are no more colored.
Is there a possibility to export the color too.
Best regards
MarcusHave you found a solution to this issue? I am searching for the same.
-
[CS4/JS] Import CALS-Tables with merged cells
Hello scripters.
I am actually trying to import CALS-tables (which is in my imported XML) into InDesign.
I used the convertElementToTable for this.
That worked, except for the merged cells (only cells which are merged to two or three columns).
How could I script the automatic generation for merged cells?
My xml-cals-table looks the following:
<example>
<table class="n" width="600" border="0">
<colgroup>
<col width="35%"/>
<col width="30%"/>
<col width="35%"/>
</colgroup>
<tr>
<td colspan="3">
<ta>content content content content content content content content</ta>
</td>
</tr>
<tr>
<td align="left" valign="top">
<ta>content content content content </ta>
</td>
<td align="left" valign="top">
<ta>content content </ta>
</td>
<td align="right" valign="top">
<ta>content content </ta>
</td>
</tr>
<tr>
<td align="left" valign="top">
<ta>content content </ta>
</td>
<td align="left" valign="bottom">
<ta>content content </ta>
</td>
<td align="right" valign="bottom">
<ta>content content </ta>
</td>
</tr>
</table>
</example>
Thanks in advance for any help!
FranziskaHello scripters.
I am actually trying to import CALS-tables (which is in my imported XML) into InDesign.
I used the convertElementToTable for this.
That worked, except for the merged cells (only cells which are merged to two or three columns).
How could I script the automatic generation for merged cells?
My xml-cals-table looks the following:
<example>
<table class="n" width="600" border="0">
<colgroup>
<col width="35%"/>
<col width="30%"/>
<col width="35%"/>
</colgroup>
<tr>
<td colspan="3">
<ta>content content content content content content content content</ta>
</td>
</tr>
<tr>
<td align="left" valign="top">
<ta>content content content content </ta>
</td>
<td align="left" valign="top">
<ta>content content </ta>
</td>
<td align="right" valign="top">
<ta>content content </ta>
</td>
</tr>
<tr>
<td align="left" valign="top">
<ta>content content </ta>
</td>
<td align="left" valign="bottom">
<ta>content content </ta>
</td>
<td align="right" valign="bottom">
<ta>content content </ta>
</td>
</tr>
</table>
</example>
Thanks in advance for any help!
Franziska -
How to print ALV with full page width used?
Dear all,
I have a report which print out with a small font if some of the fields have a long data content, while there a large white space on the right hand side.
After a few test, I think the following cause the problem:
1) The line column is less then the page column
2) The setup leave write space unused in the right side
(Tested by setup a format which have the same column count as the testing print out data)
Would like to know are there any work around on this.
Regards
Bill
Edited by: Bill Chie on Jun 13, 2011 7:23 PMHi Wiz,
Thanks for the information.
But it look like that it only affect the column width but not the migrate, anyone have any idea about the migrate setting?
And I would like to know if I can:
- Setup a limit for the long text limit
- It the text over the limit, go to 2nd line
Regards
Bill -
Printing problem with gray cells in smartforms
Hi there,
i have developed a smart form with some color logo and some gray shaded cells. If i print it by SAPLPD it comes out fine but when i print it on a printer configured in SAP it doesnt come out properly. All the gray cells print as black cells. Any advice?
Regards.Asif,
it some times depends upon the printer drivers also
i faced the same problem with one printer then i tried with the other hpcolor printer then i got the printout perfectly that means sometimes the drivers of the printer will crash with the program
so its better u try this one in the another printer
if u have this problem futher let me know
Regards
naveen -
Refresh Webi report with merged cells in crosstab in PowerPoint
Hello,
I have created a Webi report with a crosstab. In this crosstab I have merged some cells in the top left corner and inserted a title for the crosstab. Now I want to import the crosstab in PowerPoint with Live Office. The problem is, that after the import in PowerPoint the cells are not merged anymore. So I merged them manually. When I refresh the crosstab, the cells are still merged in PowerPoint, but they are empty.
Any ideas how to solve this issue?
UweHello,
I have created a Webi report with a crosstab. In this crosstab I have merged some cells in the top left corner and inserted a title for the crosstab. Now I want to import the crosstab in PowerPoint with Live Office. The problem is, that after the import in PowerPoint the cells are not merged anymore. So I merged them manually. When I refresh the crosstab, the cells are still merged in PowerPoint, but they are empty.
Any ideas how to solve this issue?
Uwe -
hai
I have created the ALV report with the company logo in it , while taking the printout the log will not apper in the print.I am using the grid alv. Could u please tell me how to apper log in the print out.
byeYou will have to do this using the print events :
PRINT_TOP_OF_PAGE
PRINT_TOP_OF_LIST
PRINT_END_OF_PAGE
PRINT_END_OF_LIST -
How can print alv with out color ?
i am printing an alv report that i define certain colors for
The columns.
But when i print the report i see lines (like XXX or /////) on the
Colors ( may be to see the difference of the colors ) .
is there any way to ignore the colors in printing ?
i checked IS_PRINT I didnt see any parameter to ignore
Colors in printing.Hi dakota,
if you print locally via SAPGUI, please play around with color options (use color!) of SAPLPD. If it happend with a SAP network printer, is has not been properly installed.
Regards,
Clemens -
ALV Grid merge cells horizontally for specific record
Hi Experts,
We have a requirement regarding ALV Grid developement.
In ALV Grid, we will have multiple records as normal output.
Output will be as below.
In that, we need Summery Text should be in from Field 2 * to* Field 6 as a single Cell and below that all output
will be normal each cell wise.
That Summery will come for each new Field1.
OUTPUT
Field1 Field2 Field3 Field4 Field5 Field6 Field7 Field8 Field9
001 | . .... .. .. Summery ........... | 10 | 20 | 30
001 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 |
001 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 |
001 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 |
001 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 |
Thanks & regards
MangleshHi Manglesh,
sorry ALV is not as flexible as Excel may be.
You can only define a header in that way but it would be above the column headings.
The ALV table display allows only to change the width of the whole column.
Regards,
Clemens -
Print document with merged project
I´m using RoboHelp 7.
I have a main project which merges to other projects. When I
print documentation to a Word file I'd like the merged projects to
automatically integrate in the main document, i.e. I'd like to
print one doc file that integrates both the main project and the
merged projects. Thanks in advance.Can't be done garcia3000 as there is nowhere for a RH project
to know where the master word file is located. The best you can do
is create all the word files and cut/paste the content into the
master project's word file.
Maybe you are looking for
-
Error while deploying New WebService as part my EAR
Hi, Jdev Version: 11.1.1.6.0 I have created a new Model project for WebService and did all the configuration mentioned on below url, I am able to test this new webservice project by launching "TasksServiceImpl.java" file locally but getting some erro
-
I have a Netflix subscription, which is supposed to let me watch movies online, on its website. However, when I selected one of their "Instant Viewing" movies, a page popped up, saying: "Silverlight Application Storage Error -- Firefox's private brow
-
Keyboard shortcut for "Clear" brush mode?
I saw on this site http://helpx.adobe.com/en/photoshop/using/default-keyboard-shortcuts.html#WS17DDC46E-8F05- 4250-8CFC-EE0AB2E6EF84a that the keyboard shortcut for CLEAR brush blending mode was shift+alt+R for windows. I tried it but I keep hearing
-
Solved my problem - random files dropped or corrupt in transfer process
Ok, problem for me similar to some others I've seen so I'll post it here: sporadic NEF files transferred with Bridge CS4 are unreadable about 1 in 20. Looking at the problem file itself, it's size is 0 bytes like the transfer process made the file,
-
Can I limit the number that can use a specific user entry to 1 at a time in acs