Print and print preview

Hi All,
I have entered an problem when I print the invoice list use VF23. Suppose i choose print preview, then it will get the right output, If i choose print , then one field i want to print is wrong. The field is in table VBSS-SAMMG.
Thanks for your help!

Hi Luna
Welcome to SDN
while u r printing the form the page will take some default space for all the sides of the form.
May be ur field missing in this space.
please check the layout and which window u r sending this field
Thnks

Similar Messages

When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off. It also prints this way. How can I print the whole picture?

When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off. It also prints this way. How can I print the whole photo?

After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
Hope this helps!

How to fetch print and print preview variables

hi everyone,
my requirement is as soon as sales order created. printout of that sales order will be taken at the same time email should be send to that particular customer.
the problem is the email is sent as soon as we check the print preview itself.
but the mail should be sent afte the pressing print button only.
how to fetch print or print preview by program
regards
karthe

Hi everyone,
I have tried open form and close form
The itcpp-tdspoolid eq '0' for both print and print preview.
I have set the open form
dialog = 'X'.
have i got to set anything in open form.
this is my open form and close form.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DIALOG = 'X'
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = itcpp
IF SY-SUBRC ne 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
else.
if itcpp-tdimmed eq 'X' and itcpp-TDSPOOLID ne ''.
endif.
regards
karthe

How do i set up the eprint from my blackberry so i can send emails to my printer and print them off

how do i set up eprint on my blackberry so i can send emails from my phone to the printer and print off

Hi Tanya_Carroll,
You can follow this link to set up ePrint.
http://h71028.www7.hp.com/hho/us/en/ep/articles/setting-up-mobile-printing.html
Once ePrint is setup, you can send an email to the printer's email address.
Be sure to use one of these email clients when sending to the printer. If the Blackberry will not send using your original email address, setup a new email account on the Blackberry and try again.
Hotmail, Yahoo! Mail, Gmail
BlackBerry mail clien
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

AirPlay won't recognize printer and print although HPprint app does

My iPad will not print from AirPlay and shows no printer on my wifi network from AirPlay. However, I can print from my HPprint app and the app recognizes my printer on my wifi network. Any suggestions to get AirPlay to recognize the printer and print?

HP Photosmart C4795.
Maybe not on the approved list even though the app recognizes it?

Slow Print and Print Setup command in Reader Ver. 8.1.2

Print and print setup command take over 30 seconds to load on Reader ver. 8.1.2. I tried ver 6 and same thing happens. Using the print shortcut and same thing happens.
System: New Dell computer (Windows XP Pro, SP2). Any advice would greatly be appreciated.

You are not alone. Same problem here on a brand new computer with 2GB of RAM. Three minutes total to print a small, black and white 1 bit, 15 page pdf file. Previous to 8.1.2 (8.1.1) the same version printer drivers (Xerox Phaser 8860 Series) worked fine (both PS and PCL versions). I've been trolling for a fix this morning - so far nothing.

HT4356 I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE. IT IS NOT ON THE ABOVE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK.

I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE. PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS

Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2)

Can I hook up my ipad to a printer and print with it?

I work in a rural area where we can only get satelite internet. We want to start printing orders here and I know there is an app for printing, however we do not have a wireless printer, Do we need to buy one or can I use the charging cord my Ipad came with and hook it up with the USB to my existing printer and print that way? Any help would be greatly appreciated!
Tiffany

You'll need a printer that is compatible to AirPrint, see this article:
http://support.apple.com/kb/HT4356
You can't use the cord to connect.
There are apps inn the app store that let you print over the Internet, without having an AirPrint compatible printer.

Updation of table after Print and Print-Preview in smartform

Hi,
I am having a requirement where i need to print multiple deliveries with the sales order data each delivery on a new page using smartform.
Now , i am using SSF_OPEN, SSF_CLOSE Fm's for the same. I need to update a Z table after the user clicks on PRINT from the pop-up or print from the print preview screen.
I tried using the output_info parameter in the smartform where i read from a post that the OUTPUTDONE parameter becomes "X" in the job_output_info when the user clicks print wither in the two ways said before.
This does not work out in case if the FM'S SSF_OPEN and SSF_CLOSE are used.
Kindly help me on the same.
Thanks in advance

yes i tried that..using the AT new event for a Delivery and then a command to go to the NEW PAGE, but somehow when i execuet the form, i could not see the layout..so in the debug i saw the subrc after the FM is run..it says SUBRC = 2 i.e. internal error. I am not able to figure that out.
So i had to use these open and close, nowi just want to update a z table if the user clicks on the print button (print preview screen) after using the print preview .
Kindly suggest.
Thanks.

I can print from every app on my MacBook except with Firefox. Printing and print preview only produces blank pages???

I have a MacBook Pro with Mac OS 10.6.4. Within Firefox, if I select File -> Print and then select preview a get a blank page. The same thing occurs if I sent the print request to my printer. I can print and preview from Safari and from any other application. Firefox is the only app that I can't print from.

Is there anyone who can assist????

Differentiate between print and print preview event trigger for sapscript

Hi guys,
For sapscript, is there a way to know if the user presses the print or the print preview button? I need a way to determine if it is a print or print preview event triggering.
I've checked the OPEN_FORM fm but found nothing useful.
Please help. Thanks in advance.

This is not supported by SAP, but well this is a possibility:
FIELD-SYMBOLS <ls_itcpp> TYPE itcpp.
ASSIGN ('(SAPLSTXC)ITCPP') TO <ls_itcpp>.
IF sy-subrc = 0.
* here you may use <ls_itcpp>-tdpreview
ENDIF.
Another way maybe is to declare the interface work area ITCPP (shared data in the same internal session):
TABLES ITCPP.
* here you may use itcpp-tdpreview

HP 6500 Printer and prints very faintly.

I changed my ink cartridges in my HP 6500 printer and it now prints very faintly or when I send a test print to the printer from my computer it will only feed the paper thru the printer.

The document here may help resolve black not printing on your Officejet 6500. Be sure to check the vents as shown in solution three. If this does not resolve the issue the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

All of a sudden Very Slow Printing and Print to PDF

I am running OSX 10.4.11 on A G4. I was having no trouble printing to a HP2500. The time to print or print to a PDF was fast from all my applications. I am focusing on InDesign CS for this discussion. I changed recently to a HP 3600N and also to 10.4.11. Now it takes 1 hour to prepare a 28 page color document for printing. Once job is sent to the printer it takes about 3 minutes to actually print it. The slow rendering of the document also occurs when creating a PDF using the Print dialog. I tried the 2500 as a test and found the same problem. It appears that 10.4.11 is the culprit. I tried the same document on my iMac running an older OSX and I had no problem. I wish I had my back up drive still on 10.4.9 so I could check that out but alas I backed up and now have the 10.4.11 OS mirrored on that drive.
I am out of business until I can resolve this problem.
Eagerly awaiting advice!
Dan

Drive A is 60 GB with 3.66GB free.
Running OSX from that drive should really slow it to a Crawl, and is getting to the dangerous point... you need at least 12GB fre, 30 GB would be better.
Nt certain why the other is so slow... did you open Activity Monitor & observe CPU, Memory & such while it is slow?
If you can free some space on the Internal, Might give a try with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.

Print and print priview of top-of-page event

Hi,
i used oops to display top of page using document class, i am printing or print priview, it is not showing. please tell how to print this html document. i am succesfully displaying html document in grid display, while printing the list, it will not printing, please tell me solution.
Thanks
Sudhakar
Sample code:
CREATE OBJECT g_document
     EXPORTING
      style = 'ALV_GRID'.
CREATE OBJECT g_docking
    EXPORTING
      repid = g_repid
      dynnr = '0100'
    ratio = 95.
      extension = 700
      side = cl_gui_docking_container=>dock_at_top.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT g_splitter
    EXPORTING parent = g_docking
    rows = 2
    columns = 1.
CALL METHOD g_splitter->get_container
    EXPORTING
        row       = 1
        column    = 1
    RECEIVING
        container = g_htmlc.
CALL METHOD g_splitter->get_container
      EXPORTING
        row       = 2
        column    = 1
      RECEIVING
        container = g_alvc.
CALL METHOD g_splitter->set_row_height
      EXPORTING
        id     = 1
        height = 14.
CREATE OBJECT g_grid0100
        EXPORTING
             i_parent = g_alvc.
CREATE OBJECT g_event_receiver.
SET HANDLER g_event_receiver->handle_top_of_page FOR g_grid0100.
SET HANDLER g_event_receiver->handle_top_of_list FOR g_grid0100.
CALL METHOD g_document->initialize_document.
CALL METHOD g_grid0100->list_processing_events
    EXPORTING
      i_event_name = 'TOP_OF_PAGE'
      i_dyndoc_id = g_document.
gs_print-reservelns = 2.
PERFORM build_fieldcatalog.
PERFORM build_layout.
g_save = 'A'.
gs_variant-report = g_repid.
CALL METHOD g_grid0100->set_table_for_first_display
    EXPORTING
      is_layout                     = gs_layout
      is_variant                    = gs_variant
      i_save                        = g_save
      is_print                      = gs_print
    CHANGING
      it_outtab                     = gt_alv0100
      it_fieldcatalog               = gt_fcat
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4.
      CLASS LCL_event_handler IMPLEMENTATION
CLASS lcl_event_reciever IMPLEMENTATION.
METHOD handle_top_of_page.
    DATA: l_date(10) TYPE c,
          l_text TYPE sdydo_text_element.
    WRITE sy-datum TO l_date.
    CONCATENATE 'Report Date: ' l_date INTO l_text.
    CALL METHOD e_dyndoc_id->add_text
      EXPORTING
        text         = l_text
        sap_fontsize = cl_dd_area=>strong.
    CALL METHOD e_dyndoc_id->new_line.
    CALL METHOD e_dyndoc_id->add_gap
      EXPORTING
        width = 8.
    IF g_htmlv IS INITIAL.
      CREATE OBJECT g_htmlv
        EXPORTING
          parent = g_htmlc.
    ENDIF.
    CALL METHOD g_document->merge_document.
    g_document->html_control = g_htmlv.
    CALL METHOD e_dyndoc_id->display_document
      EXPORTING
        reuse_control      = 'X'
        parent             = g_htmlc
      EXCEPTIONS
        html_display_error = 1.
ENDMETHOD.                    "handle_top_of_page
METHOD handle_top_of_list.
ENDMETHOD.                           "handle_top_of_list
ENDCLASS.                    "lcl_event_reciever IMPLEMENTATION

Hi,
     While using OOPS for ALV, the top-of-page and end-of-page will not show at display, but while printing it, then it will be printed properly, try to take the printout and observer.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 2:08 PM

HT3771 How do I get my computer to recognize my printer and print both Windows7 and Safari?

I added Parallel software to my MacBook Pro 10.6.8.It was printing fine then asked me to connect usb. I was just choosing esc. I think I chose connect Windows. Now won't print some things. How do I get it to print all things on both sides? Thanks for your time

You need to connect your printer to your WiFi router wirelessly - maybe by using the printer's front panel (if it has one) or maybe by using a Windows (usually) PC connected to the printer with a USB cable.
Once that's done, you can disconnect the USB cable, and print wirelessly. From your description, I'm not sure you've done this required first step.

Bran New to Mac - Printer and Printer Setup Question

I am very new to Macs, and I'm getting a Macbook Pro when Leopard comes out.
Would I need a certain printer for the laptop and a certain connector that I would need to buy seperatly for it?
-Shaun

Hi Shaun
Congratulations on the Macbook Pro!
Almost every modern printer will work just fine with the laptop. Most commonly, you would get one with a USB connection, which will attach directly to the laptop. Such a printer could also connect to an Airport Extreme/Express, and then you could print wirelessly. Make sure that the printer comes with a USB cable, or buy one - it'll likely have a "square" USB connection for the printer, and a "flat" connection for the Macbook's USB port.
Some printers also have network connections, so they can attach to a network device (like a router) and the Macbook would be able to discover and print to it, but this is more common with larger printers such as office laserjets.
Matt

Print and print preview

Similar Messages

Maybe you are looking for