Print Archived document - and get it into spool
Hi
I need to merge the ServiceOrder - shoppaper - with another pdf document.
My suggest will be to print the shoppaper again, and pick it up in the spool - the issue with that is, I need the service order to be printet in the spoolfile, so I can pick it up later by selecting from the spooltable.
The problem with this, is that I can't get the service order number to be printet on the spool.
Any who know how I can do that ?
Another solution could be to reach the pdf file from the archive server, and run a copy of program RSPO0023, so the pdf file can be "moved" into the spool.
The problem with this is that I don't know how to point out the pdf file on the archive server.
Any who know how I can do that?
Or do any have a better suggest than above?
Thanks,
No other application can open PageMaker files, only PageMaker. You'd need a copy of PageMaker (and license) and a Mac of ancient vintage, one with a floppy drive. The ancient Mac is needed not just to read the floppied but to run PageMaker which won't run on modern Macs.
Frankly, if you have a paper copy, scan it and start from that!
Similar Messages
-
Too many archived documents are suddenly extracted into BW
Dear All,
I am not person of Finance but I will try to provide necessary details here.
We have archiving in place in ECC. For a specific document, if I go to FB03 for the document, it shows the information but with message that 'Document is already archived'. Document is related to year 2011.
Now, suddenly too many documents were extracted last week spanning from year 2009 to 2011. When I check in 'Document changes', it shows that last change was done in 2011 only.
I want to know what possible change could cause these archived documents to extract again into BW.
or any pointers are also welcome.
Thanks,
PurvangIf you bought it from Apple, you are covered by one year of AppleCare, which includes three months of free phone support, for any problem. You should take full advantage of that. It sounds like you may have hardware issues (the audio jack) but a lot of your items sound like a matter of changing preferences or display settings - Apple can help with this, as can a local friendly Mac consultant.
For example, you mention that you get a "screen-wide mass of writing". Do you know what application you're opening the file in? Many Mac apps have full-screen mode, which sounds like what you describe, and you can get out of it by moving your cursor to the top right of the screen until you see the menu bar appear - there's a blue icon with two arrows, and clicking this will get you out of full screen mode.
QuickTime does not play all formats of video. Try an alternative video player such as VLC. (http://videolan.org/VLC)
Hope that helps somewhat.
Matt -
Hi,
We are attaching documents in the SAP system at the business obejct level say claim and it is archived automatically. But we need to get help in printing the same. Is there any function module or report to print archive documents ?
Thanks.
Irudayaraj PeterHi,
You can refer the below link where I have just now posted a possible solution & see whether that helps.
Solution! (Hopefully) :Print label image in GIF format
Regards,
Gokul -
How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?
Rebuild your iPhoto Library:
iPhoto 6 and later: Rebuilding the iPhoto library -
When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?
Any Help?I know the update has only been out a while but if anyone has an idea why it is doing this, please let me know!But you are telling me something I already know.
Be precise.
It is not Pages '09 that is broken.
I am back in Mavericks and testing Pages 5.2.
There are improvements, we shall see how useful, but in less than a minute I have already discovered bugs.
Peter -
hi, i purchased a 2 dvd digital set. i cant just download it straight to my ipad. they said i have to down load it to my i tunes, then can transfer to i pad. im not seeing how to click the files from my email, and get them into the i tunes acct... ugh.
i do not have a mac home pc. just a regular pcI had the same problem after I gave my old iPad to my parents and tried to install Netflix. This is what you have to do: Open iTunes on your computer, the one you sync your iPad to. Then go to iTunes Store and search for and download Netflix app. After you download it, if your iPad is set to download new purchases it may start downloading on your iPad. If so, tap and hold to delete the app (because it is trying to install the new version on the iPad) Next step, go to the App Store on your iPad and find Netflix and it should say install since you already purchased it on the computer. Tap to install, and it will say the version is not compatible, tap to download a previous version. Click that and it will install the older version! One more thing, if and when you sync to your computer again it will say something like " Unable to install Netflix on your iPad" Just click the box to never remind you again, because it's trying to sync the newer Netflix app to your iPad, but it doesn't work so it displays the message. The old app will remain on the ipad. Hope this helps, good luck
-
How to embed the Word Document and PDF file into Crystal report?
How to embed the Word Document and PDF file into Crystal report?
I have word doc which having 10 pages. I need to show all of the 10 pages at a time. I tried OLE object but problem is it shows only one page.
Is there any solution to show word doc / PDF file in CR?Symptom :
When embedding a pdf document into a Crystal Report, only the one page shows.
Reproducing the Issue
Environment:
Crystal Reports OLE object
Cause
An OLE object only displays the first page.
Resolution
Embed multiple objects, one for each page
Or
Use a hyperlink to the object instead
Hope this helps!
Regards,
Vinay -
I am having trouble with the "numbers" app on my MacBook Air. I go to print my document and that works just fine. I cannot however return to the document after printing. What do I have to do?
RR,
Not to worry, you're not the first to expect Print to finish by returning you to the edit mode. The thing is that Printing is so hit and miss with this version of the app, you will probably want to stay in the Print window for more than one attempt.
Jerry -
Extraction of oracle pkg and pkg bodies into spool file??
Hi,
I need to extract all packages and its bodies into spool file. can you give me script or guide how to do this.. i have more than 200 packages.. need to create spool file for each package. great thanks for help.
/mr
Edit/Delete MessageFrom 10g, DBMS_METADATA is designed for ! :)
[http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_metada.htm#i1019414]
Edited by: Leo Anderson on 1 sept. 2008 14:22 -
Submit report in background and get result into calling program
Hi,
I want to call the standard SAP program from Zprogram to create invoice using Submit. here the code
SUBMIT RV60SBT1 TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
WITH VKOR1 eq TVKO-VKORG
with X_VBELN eq gv_vbeln_so
with ALLEA eq 'X'
with ALLEL eq ''
AND RETURN.
the standard SAP program creates invoice (billing document number). I want to get the billing document number which created using the above statement into the calling program. ......could anyone pls tell me how to do this? ie how to read the billing document number in the calling program.
Regrds
shan
Edited by: Shankar Raju Devadoss on Mar 21, 2011 9:00 AMHi Shankar,
You can try it in both ways.
1. By using the parameter ID VF. (GET PARAMETE ID)
2. Select the invoice numbers from the table VBRK for the current date (SY-DATUM) and
sort it by time and get the latest invoice.
Regards
Hareesh Menon -
Openig Word document and storing Data into Internal Table.
Hi Everybody,
I require one solution.
Can anybody help in the following.
When i click on a pushbutton a Word document should get open.
I will type in it the following text "Hi from chetan".
I want the above text to be stored in Internal table.
Problem is that when is use method
"i_oi_document_proxy-save_document_to_table"
data is store in Raw format.
Please any body give me demo program .Its very urgent.
Thanks in advance.
ChetanHi ,
Please find the code below.
Click 'Open Word' button to open the word.
Save the file and close.
Click upload button to upload to Internal table.
Click execute button to display.
REPORT ZWSTEST.
TABLES sscrfields.
DATA: BEGIN OF ITAB OCCURS 3,
LINE(50),
END OF ITAB.
PARAMETERS: PROG(70) DEFAULT
'C:\Program Files\Microsoft Office\OFFICE11\WINWORD.EXE'.
PARAMETERS: FILE1(70) DEFAULT 'C:\TEST.TXT'.
Tick to print the Text file after saving from MS WORDS
*PARAMETERS: S_UP AS CHECKBOX.
Tick to create new or overwrite Text file
*PARAMETERS: S_NEW AS CHECKBOX.
selection-screen : begin of block b1 with frame no intervals.
selection-screen : begin of line.
selection-screen : pushbutton 2(10) Button1 user-command cbut.
selection-screen : pushbutton 14(10) Button2 user-command cbut1.
selection-screen : end of line.
selection-screen end of block b1.
initialization.
Button1 = 'Open Word File'.
Button2 = 'Upload'.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'CBUT'.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
PROGRAM = PROG
COMMANDLINE = 'FILE1'
INFORM = ' '
EXCEPTIONS
FRONTEND_ERROR = 1
NO_BATCH = 2
PROG_NOT_FOUND = 3
ILLEGAL_OPTION = 4
GUI_REFUSE_EXECUTE = 5
OTHERS = 6.
endif.
if sscrfields-ucomm = 'CBUT1'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'FILE1'
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1.
IF SY-SUBRC <> 0.
WRITE: / 'File open error.'.
ENDIF.
endif.
CASE SY-SUBRC.
WHEN 1.
WRITE: / 'FRONTEND ERROR'.
WHEN 2.
WRITE: / 'NO BATCH'.
WHEN 3.
WRITE: / 'PROGRAM NOT FOUND'.
WHEN 4.
WRITE: / 'ILLEGA OPTION'.
WHEN 5.
WRITE: / 'GUI REFUSE EXECUTE'.
WHEN 6.
WRITE: / 'OTHERS'.
ENDCASE.
Start-of-selection.
LOOP AT ITAB.
WRITE: / ITAB.
ENDLOOP.
Best Regards
Suresh -
Software update has prevented me getting back into my iPad unless I sync it. It has never ever been synced and I don't own a computer to sync it to. How do I proceed?
If you see this picture, you need to connect to iTune (computer) to recover your iPad.
-
Is there a way to take my address's I typed into Pages and get them into my address book?
I have over 200 address's typed into pages. Is there a way to get them into my address book with out copying a pasting each one individually??
Per http://support.apple.com/kb/PH4648
Address Book can import contact information that you save or export from other applications in vCard, LDAP Interchange Format (LDIF), tab-delimited, and comma-separated value (CSV) formats.
You can export addresses in vCard format from Entourage, Outlook, and others, and in LDIF format from Thunderbird, for example. You can export text files in tab-delimited or CSV format from spreadsheet applications, such as Numbers. -
Microsoft XPS Document Writer locks up and PDF995.com (creates acrabat pdf file) stops printing after the second page from this site http://super.nova.org/DPR/CinematicApproach/. This was a Windows 7, 64 bit machine that had the issue. Microsoft Internet explorer works fine and printed the document with Internet Explorer.
The machine that displayed FireFox printing issues was a up to date Win 7, 64 bit, Quad Core, 8 Gig Ram. Don't really have a question just reporting a FireFox Bug.Hi,
do you have a solution for the problem? We have actually a similar problem with locked IE8 when using a zoom factor > 100% (it's a customer WD4A).
Regards,
Steffen Brauner
Edited by: Steffen Brauner on Jul 7, 2011 6:54 AM
I found the notes 1534606+1534610 that solved my prob.
Edited by: Steffen Brauner on Jul 7, 2011 6:55 AM -
Just got an HP 8600 printer. When I get to point of "password to allow HP installer to make changes" it won't accept any of my passwords, and there is nothing that says "check here to get password" Help????
Karstenfromca wrote:
Just got an HP 8600 printer. When I get to point of "password to allow HP installer to make changes" it won't accept any of my passwords, and there is nothing that says "check here to get password" Help????
It's looking for the password for an Admin user on the machine (probably you) use the one you log onto the computer with
Maybe you are looking for
-
ABAP Query, To list both, the PO created and PO modified for a given period
Hi I want to create a query that list the purchasing orders created or modified during a given period. however, the creation date and the modification date are two different fields stored in differents tables. if I have these two fields in the select
-
Droid Razr M not working with Verizon tones app or media store.
I have a Droid Razr M and all software and such are updated where they need to be. Recently I tried to use the Verizon Tones app to download a ringtone and got an error message that it was having trouble connecting, I was connected to my wifi. Then
-
Sorry, Flagfox has encountered a problem. Please copy the report below and post it on our forums with a detailed explanation of what you were doing at the time so we can attempt to fix your issue. (English please) Flagfox version null (missing IPDB!)
-
Regarding Billing for STPO Orders
Dear All, We are creating Stock transport purchase orders using outbound deliveries is there any transaction code which will tell me that i need to create invoice for the outbound deliveries created for stock transport purchase orders. In other words
-
Strange problem with jpcap library.
Hello everone;) I have a very strange problem with jpcap. I have ubuntu 8.10, libpcap installed by apt (manually upgraded to 0,9,8) and jpcap 0.7 (installed from deb package). My code is: * To change this template, choose Tools | Templates * and open