PRINT ARE TO LARGE AND SUMMARY SAYS 9X11 FOR LETTER SIZE???

I am completely stumped by this probelem. For some reason my prints are comming out larger than they are supposed to in Illustrator. When I print a page and choose letter size with no border I check the summary page and it says that I am printing to a 9 x 11 inch page. This doesnt make any sene becasue everywhere else it is listed as 8.5 x 11. Ive tried reinstalling illustrator, my printer drivers, deleting printers completely, and nothing seems to work. If anyone has any ideas I would be so grateful
I have a MacBook Pro running 10.5.6 and the CS4 Master Collection.
Everything has been updated for both CS4 and OSX.
My printer is a Epson r1800. ( i dont think its a printer problem because even when I delete the printer from the mac system the Illustrator print summary still says 9 X 11 when I print to an 8.5x11 page.)

no you are incorrect the document size is still is still 8.5 x 11 and
the bug i in the display of the paper size when it is displayed in
inches you can test this by closing the print dialog and then changing
to points and you will see you are back to 612 points by 792 points or
8.5x11. The reason you are getting an enlarged document is that you
are choosing to use bleed paper for your printer and that has nothing
to do with the bug for display the paper size incorrectly. Keep in
mind paper size and docunent size are independent of each other and
mean two different things.
When you choose bleed for the paper your printer's drivers enlarge the
document, that is not a bug, it is an expected behavior.
There is usually a control for the amount of enlargement you wish to
occur but there must be an enlargement in order for the bleed to be
success due to paper shift in the printer. If you don't enlarge and
the paper shifts just a little you get a white edge on one side. You
can set the bleed amount to be the minimal and that will help you get
close to the correct size but still it will be sightly larger then the
actual document file or artboard.

Similar Messages

I got all the way to the settings to find my printer's email address and it says it's not connected

officejet 6500A - Windows Vista I think - setting up my EPrint and tried to find my printer's email address and it says "the printer was unable to cnnect to the server"

Hello cstace22,
I would try power cycling the printer to start with resolving your connection issue. While the printer is still on, unplug the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once plugged back in the printer should power on automatically.
If you are still experiencing issues after this has been done then you may want to try restoring your network defaults and then reconnecting to your wireless network.
Hope this helps.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

TS1702 One of my apps is called Shelf Wallpaper and in this App there are Icon wallpapers and it says VIP Only on them so when i press save on a wallpaper i like in this section it says: Please upgrade through in app purchase to save all vip Pictures how

One of my apps is called Shelf Wallpaper and in these wallpapers there are Icon wallpapers and it says VIP Only on them so when i press save on a wallpaper i like in this section it says: Please upgrade through in app purchase to view and save all vip Pictures and then a button comes with Upgrade or cancel on it so naturally i press upgrade but nothing happens.How do i get to download these wallpapers.?

Well I figured out my problem lol
Email a- original apple id email
Email b- original gamecenter id
Email c- the new gamecenter id
Email d- the temporary email for switching stuff
So originally I had Email a for apple id and icloud, and Email b for gamecenter. I wanted my gamecenter and apple id to be the same. Well today I went on my moms phone and saw that I was still on family sharing under Email d. That's when it hit me, your gamecenter, apple id, and icloud are the same account. By switching my gamecenter id to Email a, I turned that into my new apple id. Now my apple id is back to normal, and my gamecenter is Email c (I don't use Email b anymore so that's why I wanted to switch it).
Basically, my problem was being stupid enough not to think that your gamecenter was connected to your apple id. My problem came from switching my gamecenter email. So that's how to avoid this, don't be an idiot and think your gamecenter is a whole different account. For anyone who ever has this problem, that's why it happened haha.

I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
ps: i'm hopeless.

So what you want is for it to say Lebanon (English)? If so, see if this helps:
http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

I am trying to print from my computer and it says paper jam, but i can make copies

I am trying to print from my computer and it says paper jam, but I can make copies, print pictures from the printer.
There is no paper jam?

Welcome to the Adobe Forums.
To better assist you with this issue we need to know:
What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)

The PST files are rather large and contain tons of folders each

The PST files are rather large and contain tons of folders each, so it's kinda hard to go through each one finding this very specific Subject line. Is there any other way to scan within the PST files to find a particular text string, like this Subject
line? Before I start googling this stuff, I thought someone might already been there/done that.

Great, but all pst files aren't indexed so this could take a long time if you try it this way.
Outlook Recovery Toolbox from: http://goo.gl/MU7fEk and it helped me to get the PST data after a heavy corruption. This is the capable software which can also be used to get the deleted pst data like emails
etc. You can find it here: http://goo.gl/MQn5gI

HT4623 after updating my ipad some of the apps aren't usable. They are "greyed out" and it says "waiting..." below the app when I tap on it.

after updating my ipad some of the apps aren't usable. They are "greyed out" and it says "waiting..." below the app when I tap on it.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... (But can take Longer..)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

HT4061 Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please

Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please help

The IMEI number is stored in iTunes:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
I can't imagine that any police agency in the world would request this information.

I downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

i downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

Hi runner_girl7585,
Thanks for using Apple Support Communities. If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari

HT5621 I am being prompted for the questions for my apple ID. I have put what I think are the answers and it is still not letting me purchase games from my account. I try to send the answers to my e-mail and I am not getting them.

I am being prompted for the questions for my apple ID. I have put what I think are the answers and it is still not letting me purchase games from my account. I try to send the answers to my e-mail and I am not getting them. I had account issues about a year ago where my id was spelled wrong. Could this be associated with that?
<Email Edited by Host>

Hi gymdad1959,
This article has instructions for resetting security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Cheers!
- Ari

HP z6100 Photo prints are too dark and magenta density is too high, etc...

Hi,
Here's the problem. I am having digital portrait photos printed at 20" by 26" in. for wall displays on an HP Z6100 designjet using universal adhesive vinyl. The test prints came back dark and with strongly pronounced magenta and red in the skin tones. I have a few questions that I hope you can help me with:
1. Is universal vinyl really the best print medium for this or would some photographic paper like luster or matte yield better results?
2. I am not in control of the printing process itself, but would providing the ICC profile for the printer/paper combination make a difference in correcting this issue?
3. The images are jpegs and the color space is sRGB. Should I convert them to CMYK for better results?
4. Any other suggestions please.
Thanks for any help.
Troy-B

Hello Troy-B
The product you have is a commercial printer. I suggest posting in the HP Business Support forum for a better chance at finding a solution.
You may find the Commercial Designjet board here.
http://h30499.www3.hp.com/t5/Printers-Designjet-Large-Format/bd-p/bsc-414
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Both the Texts and Graphics When I open windows are too large and blurry. Is this anyway I could fix this?

When I open Firefox (Firefox is updated to its latest version) both the text and the graphics are too large. I've tried zooming in and out features, but the texts become unreadable.

CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.<br />
See Firefox built-in Zoom functions:
*http://support.mozilla.com/en-US/kb/Page+Zoom
*http://support.mozilla.com/en-US/kb/Text+Zoom
If that does not fix the problem, you can try renaming the file (''with Firefox closed; Firefox button > Exit or File > Exit'') '''''content-prefs.sqlite''''' to content-prefs.sqlite.old (or delete the file) in the Profile Folder to reset the page zoom on all sites. That file will be re-created when you restart Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*You can use the following to go to the Firefox profile folder:
**Help > Troubleshooting Information > Profile Directory, click Open Containing Folder
Zoom Add-ons:
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

HT6437 My itunes cannot locate my ipod. All the sync option are grayed out and diagnostics says that itunes cannot find usb ports and that no device is connected when it is. What should I do to solve this issue?

So itunes is giving me problems. Since around Christmas time, itunes decided to stop reading my ipod. I connect it to my computer with the usb cable and my computer will recognize that a device is connected but itunes will not. If I go to file->devices and try to sync, all of my sync options are grayed out, while before it would just automatically sync.
When I run diagnostics it tells me that under ports that it cannot find usb ports (it has a green circle?), a type of cable isn't found, and that no device is connected with the usb cable (which my ipod is). I have been trying to fix this issue but nothing is working. I've tried restarting my ipod, itunes, and my computer, i've also tried resetting my ipod and uninstalling itunes then reinstalling itunes but nothing seems to be working.
Does anyone know how to solve this issue?

Do the USB ports work for other devices?
Does the iPod charge?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I am trying to download latest itunes update and after clicking download it changes screen and its says 'thankyou for downloading' but nothing has occured?

My PC says itunes cannot use my phone or ipad as they have latest ios7 and i need to update itunes to latest edition.
When I go into Itunes and download the latest it says "thankyou for downloading" but nothing has changed?
Any Ideas or help appreciated....

See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
tt2

PRINT ARE TO LARGE AND SUMMARY SAYS 9X11 FOR LETTER SIZE???

Similar Messages

Maybe you are looking for