Print as booklet ?

Hey i have a question about 'print as booklet' :
— is it possible to print only one page of a booklet (but without changing the booklet itself).
or
— is it possible to export the booklet as a PDF : i can choose Adobe PDF 9 as a printer but i doesn't ask for a filename so i don't think the file is created…
NB. I need to be able to print only certain page of the booklet, i need to print it recto verso by hand…

Print Booklet doesn't handle ranges from the booklet well, and it sounds like you want to print to a non-duplexing printer. I do that by printing to PDF, then printing odds and evens from Acrobat. Selecting Adobe PDF 9 should work as the printer (but there are some changes if you upgraded to Snow Leopard, I think). There's a recent post about that on InDesign Secrets.

Similar Messages

I am trying to print a booklet. I have printed it several times without issue. Now when I print, it gives me one blank page or else 2 out of my 8 pages?

I am trying to print a booklet. I have printed it several times with no issues. Now when I try to print it (with no changes in the program) it will either give me a blank page or will print one of my pages (there are 8 pages total). Any help?

No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

How can I print a booklet where each pdf page is vertically placed on each half page instead of one pdf on each booklet page?

I've printed a booklet before but each pdf page had two powerpoint slides on each pdf file. This binder has one powerpoint slide on each pdf page and if I try to print it as a binder, each pdf page takes up the whole half-page on the booklet. I want to print two pdf slides on each page of the booklet so when I open the booklet, there are four powerpoint slides printed. So I basically want to combine the ability to print multiple slides per page but in a booklet form.

Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

How to print a booklet in A5 hor sheet format?

Hi everybody,
from a couple of days I'm trying to print a booklet onto a A5 sheet's format. Each sheet should display 2 columns. The personal setting are 13 mm margin all around the sheet and 26 mm between the 2 columns.
When I'm trying to print, personal setting are not respected and the Reader prints with its own margin's setting which I cannot modify as i need. All this cause that the print area turns to an A6 format.
Default margin of the software are 25 mm all around the sheet and I don't findo no optiono to modifay them.
Someone can help me? Thanks!
Bo.

hi
u can use
<b>FORMAT INTENSIFIED ON.</b>
regards
ravish
reward if useful

How can I print a booklet without a white outline around the border?

How can I print a booklet without a white outline around the border? I'd like the front page to be covered entirely.

You either need a borderless printer, or you have to print on oversize paper and trim off the bleed.

Two-sided printing and booklets (HP D2360)

I am trying to do two-sided printing and booklets with an HP DeskJet D2360 printer. I installed on my MacBook the software I downloaded from hp.com. The printer was correctly identified even before I installed its driver.
I am trying to print web pages, ODT documents, and PDFs documents from Preview, either two-sided or as booklets. The booklet printing option appears nowhere, while the two-sided printing option is grayed-out. Both options show up and work properly under Windows XP.

1. If the form is a oure XFA form then you can control the duplex printing settings in the Master Pages. You may need to define a second Master page that has the duplex printing on for the appropriate pages.
2. Yes having a checkbox indicate a value in another field is possible but you will need script to do it. On the chanege event of the checkbox you want checked you can add code like this:
if (this.rawValue == 1){
numericFieldName.rawValue = 100.00
} else {
numericFieldName.rawValue = 0.00;
Paul

Printing a booklet

I am having a terrible time trying to print a booklet. The end result should be 8.5 x 11, printed on 11 x 17 paper.
If I try to print directly to our Canon ImageRunner, I get an error.
If I export to a PDF, it either prints out as an 11 x 17 page size or I get a booklet with the pages all out of order.
If I were printing from something like WORD, this would be a breeze.
How can I get help?

And don't attempt to use the Canon's booklet module from Print Booklet.
If the Canon has a finisher that can fold and staple, I think you'd do better to export the file to sequential pages as a PDF and print from Acrobat.

Creating a multipage PDF that prints 2 booklets side by side?

Hi I am a designer with NO pre-press experience and I need some help!
I am trying to print a booklet that is set at 8.5 x 7 as a 2 up document on 8.5 x14 paper. My problem is that I don't want the booklets to print consecutive pages (right now they would print 1,2 3,4 5,6 etc.) I want them to print side by side so that when the sheets are cut we would have 2 completed and collated books.
I know that I could just duplicate each page and print that, but I am wondering if there is a quicker way to make this happen? We have over 100 different multipage PDFs to print so I'm looking for a lean way to get this done.
Is this possible? Do I need to purchase pagination software?

When I need to do this I generally make a file set up as a single page (8.5 x 7, in this case) for easy design, then create a second, non-facing doc at two-up size (8.5 x 14) and place the pages from the first file int the second tow times so I have two copies per page. I use the Multi-page importer script for this: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files

Problem of the poor quality of print as booklet

I hv encounter the problem about the output quality .The file is quite low in resolution while i choose print in booklet,
I use the SAME pdf output setting. The output pdf file from "export (pdf)" it is abvious better than the one from " print as booklet"
How can I fix this problem ?? THX A LOT

How do i get Reader to NOT print in booklet form?

All my print settings are set to print normal, but only adobe reader prints in booklet form. I've checked the "properties" settings for the printer and the "page layout" is set to 1 page per sheet and booklet is not checked. On the print dialog screen the page scaling is set to "shrink to printable area." Adobe Reader is the only program that prints as a booklet. Is there something i'm missing???

Dear user,
You should be doing just fine if you have already ensured that printer settings are not referring to booklet as well as Reader printer dialog.
This works just fine for all the users. Are you still seeing this issue or is this resolved?
Thanks,
Atul Agarwal
Adobe Systems

Indesign wont print duplex booklet

im having an issue printing duplex booklet straight out of indesign
i have enabled two sided printing on my BROTHER MFC-J6510DW printer dialogue, but when you send it, it doesn't print duplex.
for now i have had to add a PPD patch file so i can print the booklet to PDF (postscript) file, and then from there the printer seems to have no problem printing the document duplex.
any ideas why it doesn't work straight from indesign?

Other programs don't mean a thing to ID and printing. The bad news is I'm a Windows user and the dialogs are a little different and I never can remember which buttons are which on the Mac. You need to get all the way to the printers driver settings dialog -- might be called printing preferences or something similar, and it may be one level deeper than you've gone so far.
Or it could be that ID and that printer just don't get along.

Printing a booklet on 970Cse

I have a HP 970Cse and need to know if I can print a booklet (5.5 X 8.5) using letter size paper.

Hi karismac,
In Pages, as in most applications, the paper size printed to is managed through the File > Page Setup menu. See this document for details -
OS X Mavericks: Page Setup dialog
http://support.apple.com/kb/PH14418
Note that if the size you want is not available in the dialog, you may add custom sizes.
Thanks for using Apple Support Communities.
Best,
Brett L

Printing a booklet on A3 paper

How do I set up a pages document to print a booklet using A3 paper?

Hi karismac,
In Pages, as in most applications, the paper size printed to is managed through the File > Page Setup menu. See this document for details -
OS X Mavericks: Page Setup dialog
http://support.apple.com/kb/PH14418
Note that if the size you want is not available in the dialog, you may add custom sizes.
Thanks for using Apple Support Communities.
Best,
Brett L

Printing a booklet - Margins (move page to outer edge)

Hi,
I'm trying to print a booklet. The Problem I have is how to set the page margins correctly.
My file is in A4 and then I use the booklet printing feature which then prints 2 pages per sheet as desired.
I would like the 2 pages on the sheet to be on the outer edge of the page and have a rather big empty space in the middle for binding.
But the middle is once the right and once the left border so I can't just increase the left or right margin in the source document.
How can i achieve this? I know it should be possible but I don't know how.
I hope you understand the problem.

Under page scaling in the print dialog select none and choose a bigger page size. Don't set final pdf pages to A3 as this leaves no room for trims....

Booklet Gutter Issue - When I print a booklet at 11x17, it causes a large white line down the center. But, when I try the same thing at 8.5x11 it prints side by side as it should. Help?

I have a 36 page booklet (each page is 8x5.5in). I have exported the booklet from InDesign as Pages. In Acrobat, when I select Print Booklet and 11x17 paper, it created a large white gutter down the center and the pages do not back up to each other.
I tried the same thing with 8.5x11 paper and they pages backed up to each other correctly with no white space down the center.
I tried again at 11x17 (size needed to print my booklet full size), and it's still causing the large white gutter. It's nearly half an inch or larger.
Help is VERY appreciated!

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

In Design cs5 print to booklet how the heck do I pdf

Ok I've tried -- print to booklet and then press print pdf. It won't do it ...says doesn't support this action.
Then I printed booklet to postscript, opened in distiller and made a pdf out of it.
Is there a way - as in cs4 on pc to just print booklet to pdf?
Can you fix that and send the update?

On Snow Leopard you're pretty much stuck.
InDesignSecrets » Blog Archive » Acrobat’s Adobe PDF Printer Replaced in Snow Leopard

Print as booklet ?

Similar Messages

Maybe you are looking for