Print Attachments Without Opening the File (Right-Click)

Hello:
When I right click on any icon attachment to print, I do not see the "print ..." options on the menu. All I see is "print". If I select my local printer as default to print,
I don't have any problems printing, but if I set my network printer as a default, nothing happens. Nothing appears in the print que as being sent. The reason I prefer to use the right click method is that I receive many email attachments
that needs to be printed and opening every attachment is cumbersome.
Thank you for your help!

Hi,
Thank you for your question.
Which version of Office are you using? I got "Print" too on the menu instead of "Print..." when I right click an attachment icon in the body of an Outlook message. I've checked
this on Outlook 2007, Outlook 2010 and Outlook 2013, the same display, thus I think, this is the expected behavior.
Regarding the print issue, does this only happen when you print an attachment from an email message? What if you print an email message or print an Office document directly from the Office applications?
Please provide more details, so that it will be easy for us to narrow down the issue. As an initial troubleshooting step, you can try to delete that network printer from Control Panel, add it again, then verify result.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

How do i download and e-mail from a zip drive without opening the file

How do I download and e-mail data from a zip drive without opening the file?

Hi.
If you have a Zip drive, you can handle the file as you would any other file. Copy and paste. Drag and drop. Select and attach as an email attachment.
Zip drive data discs came in two capacities, 100MB and 250MB. So the largest files would not exceed those capacities, depending on the media from which they are pulled.
The trick, I should think, would be finding a working drive that can read the media... and hope that media is not corrupted. Zip media was notorious for failing.
I hope this helps.

How to write IPTC metadata to files without opening the file?

HI,
I'm trying to run a script (preferably in JS) that allows me to write metadata to a file. I can acheive this very easily by opening the file, but I'd need to batch process many large images, so opening them would cause severe slowness. The purpose of adding the metadata to the files is to search upon them in Bridge.
We're using CS5, but have CS6 if it's better to use.
My Script
// set current doc ref
var docRef = app.activeDocument;
// Set caption in active document
docRef.info.caption = "Some Meta-Data";
Do I need to use bridge to write the metadata without opening the file? Or can running the script in PS allow me to do so?
Thanks,
Tom

Its easy if you use XMP metadata.
app.activeDocument.info.caption (in photoshop script metadata)
and it is the same field as:
     Dublin Core namespace
     namespace:     http://purl.org/dc/elements/1.1/
     Property:          description
you change description on XMP = you are changing the same image.info.caption
Your answer is here:
http://forums.adobe.com/message/5743730#5743730

Print without opening the file (using two Adobe versions)

I used this a lot but recently it's not working. Right click on the file, hit Print from the drop down and the file magiclly prints. (this magic saves a lot of time)
Now, when I right click and hit print I get a "Open With" dialog box, forcing me to open the file and then print.
I have Adobe Acrobat 6.0 Pro and also Adobe Reader 9.1 installed. I have reader because many websites require 8.0 or higher for pdf browser viewing. I am guessing the problem is somewhere in the file type association but don't know how to fix it.
It used to work for me but after some update it's not workinig no more
Thanks for your help!!!

If you have a postscript printer or rip which has the ability to create hot folders to link to the printer queues you could simply drag-n-drop and PDL (page description language) file like PDF, PS, EPS to that hot folder to initiate printing. Again, very dependent on your printer/rip device.

Printing pdf files in a browser (e.g. Firefox) without opening the file

I have a web application, which is generating pdf files. Is it possible to print a pdf file on the default printer without opening the pdf file?
I want to click on the link of a pdf file and the file should be printed immediately on the default printer.

I do not think this is a feature of the browser. In Firefox I can set that a PDF file is opened using a PDF viewer. At this point I would specify the Adobe reader. Instead of opening the PDF file this file should be printed immediately.
So my question is: Is it possible to configure the Adobe reader that the PDF file is printed immediately?

See PDF attachments without saving the file

Until a couple of weeks ago, I click on the attachment and the Adobe program will open the file and after that I decided if want to save the file.
Now, when I click on the attachment, I get the "Save file" screen.
then I have to open Adobe and go to where the file was saved to see the attachment.
How can I see an attachment without saving it?

Have you checked Application setting for PDF in Firefox? See https://support.mozilla.com/en-US/kb/Managing%20file%20types
Update your Java: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java]

How to view contents of file without opening the file?

Does anyone know of a utility that will allow you to quickly view the contents - or a part thereof - of a file (particularly Word files) without having to open the file? I have thousands of files restored after a disk failure, but their filenames have been lost and replaced with sequential numbers. The only way of knowing the contents is to open the file, a tedious process for so many. I seem to recall seeing a shareware app that allowed this. Thanks for any help.
MacBook Pro 17 Mac OS X (10.4.8)

Open the Script Editor in the /Applications/AppleScript/ folder and paste in the following:
tell application "Finder"
repeat with this_num from 1 to 5
set the_item to item this_num of window 1
set the_name to name of the_item
set the_text to (read (the_item as alias) from 1 to 15)
tell application "TextEdit"
set text of document 1 to (text of document 1) & the_name & return & the_text & return & return
end tell
end repeat
end tell
Before running the script, place the folder containing the files in the frontmost Finder window; you may want to split the files between several different folders and process each folder before heading on to the next one. The numbers in blue can be customized as needed; the first one controls how many files the script will search on each run, and the other two define what part of the file will be searched. The output from a file which is in a format other than plain text may contain document formatting and other content which will look like random characters.
(19999)

Client_ole2 to Print wpw extension file without opening the file

Hi All,
I am using oracle 10g and want to print .WPW file directly to Printer without opening it.
I have used two Procedure
PROCEDURE Change_attrib(v_filename in varchar2,v_attrib in varchar2) IS
temp varchar2(200);
BEGIN
if v_attrib = '1' then
temp := 'attrib +R '||v_filename;
host(temp,NO_SCREEN);
elsif v_attrib = '0' then
temp := 'attrib -R '||v_filename;
host(temp,NO_SCREEN);
end if;
END;
PROCEDURE word_file( p_FileName varchar2 ) is
args      client_ole2.list_type;
application client_ole2.obj_type;
docs      client_ole2.obj_type;
doc      client_ole2.obj_type;
Begin
     change_attrib(p_filename,'1');
application := client_ole2.create_obj('word.application');
     docs := client_ole2.get_obj_property(application, 'Documents');
args := client_ole2.create_arglist;
client_ole2.add_arg(args,p_filename);
doc := client_ole2.invoke_obj(docs,'Open',args);
client_ole2.invoke(application,'PrintOut');
client_ole2.destroy_arglist(args);
client_ole2.release_obj(doc);
client_ole2.release_obj(docs);
     client_ole2.invoke(application,'Quit');
End word_file ;
and Simply call like below
word_file('c:\cn1.wpw');
Printing is good but everytime it pop up save as option which is not intended.
Please Help!!!!!!!!!!!
Best Regards,
SPS

If you have a postscript printer or rip which has the ability to create hot folders to link to the printer queues you could simply drag-n-drop and PDL (page description language) file like PDF, PS, EPS to that hot folder to initiate printing. Again, very dependent on your printer/rip device.

Printing to PDF opens the File

I recently upgraded to Adobe X. Every time I print a file (from Excel, Outlook, Word, etc.) to PDF, Adobe opens the new file.
I'd prefer it just save the file as generally I don't need it open and am spending a lot of time waiting for it to open just to close it again.
I've been through the preferences, but don't see an option to turn this off - does anyone know how?

Start>Settings>Printers, right click on the Adobe PDF printer, and select Printing Preferences. Under the PDF settings tab should be a button for viewing the PDF, just uncheck it.

Adobe crashes on printing - unless I open the file and wait for 10 seconds

We are having printing issues with Adobe Acrobat X or Xi Standard and or Professional on client PCs running Windows 7 32 Bit OS.
If we open a PDF file and request a printed copy Adobe crashes. If we open the documnet and wait 10 seconds before printing the document it prints perfectly well and Adobe does not crash.
What is causing this problem? I haved tried to uninstall and reinstall Adobe Pro but this does not fix the problem.
I've tried changing the printer type to direct IP printing but this has not helped.

Hello youlichika,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not able to power on your desktop, and I would be happy to assist you in this endeavor!
In following the document for Troubleshooting Power Supply Issues, were you able to follow steps 3-9? If so, what were the results?
If you have come to the end of the document, and you still have to drain the power from the computer to power it on, you can find a replacement part (5188-2627) through one of the sites available by following this link.
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Feature request: open the file I clicked, even if the terms need to be accepted

Three times today I've gone to open a file and the 'New Terms' window opened up. Each time I clicked it and the program opened, though without my file being open. I then have to go back, find the file and open it again. I wouldn't normally complain, but this happens a LOT, as Adobe programs update constantly. Or something.
When I click a file, i want it to open, not to deal with adobe's admin needs. I'm trying to get things done and am already paying lots of money to do so.
Please add some code to continue opening files even after I deal with your terms and conditions requests.

Hello,
i assume that you have otf output which you convert to PDF. If this is the case then one solution in the multiple document print situation is the following.
Before converting documents from otf to pdf concatenate all otf into on table. Then convert everything at once into one big PDF file. Now the enduser needs only open one pdf file and print this out. In my solution i even do not write files. Instead i use RFC to move pdf data and then append the pdf to the output using cl_wd_runtime_services=>attach_file_to_response.
The complete docu is available in Display Smartform Pdf output in ABAP Webdynpro application

The only way to get the bookmark link open is to open the folder right click open. Why is this?

When i click on the link i want to go to nothing happens. ex: lets say that i want to check my email, well i would normally go to email folder> and just click on yahoo or gmail. well now when i do this nothing happens. i have to right click then go to open.

Thanks but unfortunately I don't have that option (I'm im Australia) so this will be day 8 that apple have my money without authorisation. The amount has now increased due to the transactions that were pending prior to me cancelling my credit card. The total is now over $300 including the overdrawn fee. It is beyond comprehension that a company the size of apple doesn't have a *real* customer service dept that handle these types of *real* problems immediately via phone contact but I guess that's the point isn't it? If we want to use the apps they provide thru their services and devices we have no choice but to put up with their primitive third world service. I sent them an email via the link you provided 4 days ago. There is no excuse for me to be STILL waiting for this problem to be resolved - none whatsoever, it is disgusting. Thanks for responding I had a feeling that was the only way to get this resolved, only it is so unbelievable I had to make sure.

How do I modify the file right-click context menu to add "creat shortcut"?

I have just chosen Mozilla as my browser and want to add shortcuts to files by using the right-click context menu, but there is no "create shortcut" choice displayed.

Could you describe where you're clicking, exactly? Are you clicking on a web page, or clicking a link on a web page? If you are using Firefox to browse files on your hard drive, you're probably better off using Windows Explorer to do that since Firefox doesn't have all the functions of Windows.

Using filestream without opening the file

Sir
I am trying to save a file to the SQL database using the following code. The code runs successfully but the file opens up during the process.
Dim fs As FileStream
fs = New FileStream(strFileName, FileMode.Open, FileAccess.Read)
Dim docByte As Byte() = New Byte(fs.Length - 1) {}
fs.Read(docByte, 0, System.Convert.ToInt32(fs.Length))
fs.Close()
I do not want the file to open. Any suggestion. Please help me
Regards
Manoj

Sir
I am trying to save a file to the SQL database using the following code. The code runs successfully but the file opens up during the process.
Dim fs As FileStream
fs = New FileStream(strFileName, FileMode.Open, FileAccess.Read)
Dim docByte As Byte() = New Byte(fs.Length - 1) {}
fs.Read(docByte, 0, System.Convert.ToInt32(fs.Length))
fs.Close()
I do not want the file to open. Any suggestion. Please help me
Regards
Manoj
I'll also suggest that you read the file in inside a Using block and you check to be sure that the file's size isn't too large:
Using fs As New IO.FileStream(filePath, _
IO.FileMode.Open, _
IO.FileAccess.Read)
If fs.Length <= Int32.MaxValue Then
Dim bytes(CInt(fs.Length - 1)) As Byte
fs.Read(bytes, 0, CInt(fs.Length))
' Now do something with the byte array
' just read in. For this example I'll
' just write the file to my desk
Dim desktop As String = _
My.Computer.FileSystem.SpecialDirectories.Desktop
Dim fileName As String = _
IO.Path.GetFileName(filePath)
My.Computer.FileSystem.WriteAllBytes(IO.Path.Combine(desktop, _
fileName), _
bytes, _
False)
Stop
End If
End Using
The test is done because of this: The .Length property of a FileStream is a type Long but the .Length
property of an array is an integer.
Still lost in code, just at a little higher level.

Print Attachments Without Opening the File (Right-Click)

Similar Messages

Maybe you are looking for