Print automaticly order production after an user status modification

Hi all,
I launch and print the order production with the user status 4, and I want to print it again when user modify the status to 8.
Do you have any idea ?
Thanks
Regards
Pierre

Pierre,
Use program "PPPRBSEL" with a custom defined Selection Profile to select production orders if you want to pick the orders based on the required user status and also activate check box for "Reprinting", this program can also be scheduled to run in background to automatically print.
Regards,
Prasobh

Similar Messages

  • Perform automatic notification actions based on user statuses

    Hi,
    According to the doco in the IMG for defining status profiles, it should be possible to do stuff when a status changes:
    When you maintain the status profile, you can, for example, specify whether quality notifications can be processed in this status or whether a deletion flag can be set. You can also specify whether a deletion flag is to be set automatically and whether the system should respond with a warning message or an error message when a deletion flag is set. (my emphasis).
    This is exactly what I'm trying to accomplish: delete notification when a particular user status is set. But how? The business transaction control only specifies what can/cannot be done, nothing about what should be executed on a status being set, let alone automatically.
    Or am I missing something obvious? Version 4.7 here.
    Thanks,
    Mike

    Closed due to lack of interest...

  • PM order for set/reset  user status

    I have one requriement like this I need to update the user status for  many operations  of single PM order at a time when user sets or resets the status. Kindly let me know is there any function module or any bapi for this or can you suggest me how to proceed with the further actions to handle this.
    thanks in advance for your help.

    Hi Jaya,
    Before i tell you the FM, there is something u must know about changing the user statuses in PM.
    User statuses are sequential in nature. Eg, if current user status is 15 and you want to set the new status to 30, you must set it to 20, then 25 and then finally 30.
    For this you must first fetch all the valid statuses for the PM order depending on its status profile.
    Next, call the following FM repeatedly each time passing the next status number in sequence until you reach the desired status number:
    'STATUS_CHANGE_EXTERN'.
    Hope this is helpful.
    Thanks,
    Sonal

  • Laserjet printer automatically turns on after shut off

    Hello! After I turn off my printer, it automatically turns on again after a few minutes and I'm not sure why. Please help thanks.

    Hi , I understand that after turning the printer off, it automatically turns on again. I will certainly do my best to help you. I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation. I would update the printer's firmware if the issue persists. HP LaserJet Pro CP1025nw Color Printer Firmware Update Utility. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

  • Production Order User Status

    Dear Experts,
    I have created User Status with T-Code BS02 and assigned to the production Order. With the User Status I am blocking the GR, if confirmation is not carried out.
    Everything is working fine along the process. System is blocking the GR if confirmations are not done. Upon confirming the user status is changing in Prd Ord and then allowing the Goods Movement.
    But now if I cancel the confirmation, the user status is not rolling back (Block GR Condition). After cancelling the confirmation even I am able to do the GR, which should be blocked. How to do this?
    Also, in confirmation parameters, I have given "Error if sequence is not adhered to". This is blocking the confirmation of operation if previous opn is not confirmed, But here I can delete the previous confirmation (CO13), after confirmaing the later operation. The deletion of previous confirmation should not be allowed if later operation is confirmed. How to achieve this?
    Kindly advice me what are the settings required for this.
    Regards,
    Rohit.

    Rohit,
    After cancelling the confirmation does the order get back the user status as defined by in BS02?
    Please check out this.
    Regarding your query about CO13, although you have made necessary setings in OPK4, it will be effective only for process of confirmation & not for cancellation.
    But you can certainly achieve the control of cancellation of confrimation as per your requirement by using userexits available in CO13. Those are listed below.
    CONFPP01
    CONFPP02
    CONFPP03
    CONFPP04
    CONFPP05
    CONFPP06
    Kindly take help of you ABAP guy.
    Hope this helps you.
    SmanS

  • How to release user status for sales documents automatically

    Hi All,
    We have configured status profile for third party sales document type. This will stop creating PR from sales order. After chaning the status from STP to GO, system will create PR. But the problem here is user is going and changing the object status manully.
    The business wants to release at a time many records automatically. Do we have any transaction code which we can use for changing the user status automatically for many orders?
    We have tried V.26, but this is just report we can not change the status automatically,
    Thanks in advance!
    Regards
    Lakshmikanth

    Hi,
    No standard program exists for it, as statuses are always customized.
    create a BDC program for status change and run in backgram as batch job.

  • User Status for process orders

    Dear Experts,
    We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
    My question is can we automatically set the two consecutive user statuses ?
    Means when the GR for process order is done i have set the user status as GR.
    Next user status is CLSD.
    So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
    I am trying to do it but i am getting error as-
    "Status CLSD is not allowed (ACT 30000292 0010)"
    Your help is highly appriciated
    Regards
    Vivek

    Hi,
    1) Still your order is carrying cost, it has not settled properly
    2) you can check in CO02 itself, Go to tool bar at top
    3) here Go to > Costs > Analysis & check whether order is set to Zero
    4) you can check in KKBC_ORD also
    Also, pls refer below link
    Re: HOW automatic order status change to CLSD
    regards,
    Sankaran

  • User status in sales orders

    Hi all!
    Can anyone tell me if there is a way to control the possibility of changing a sales order through the status?
    I wanted that when a sales order reaches a certain user status, for it to be blocked to modifications, as if it was display only...
    Thanks!!!
    Best Regards,
    Carina Maeiro

    Hi Carina,
    Requirement is strange, but still may be possible,.
    Can you give some more info like..
    1. all the users have to be blocked or only particular user?
    2. what wud be the next flow processing of tht order ? like after blocking what you wanna do ? want to raise a message or ?
    Some Work arounds for the above 2 scenarios wud be.....
    1. if a set of users have to be blocked, its very much possible thru customization like, you can define status Authorization keys in Status Management in SPRO where u will be setting the auth key for the user profile
    2. if you want to just block the user not to go ahead i e atleast he shudnt save the order, you can implement CRM_ORDER_STATUS Badi in which you have to raise a error message on the application log saying tht it cannot be saved for so and so reason
    if this solves..coool ....if not tell me the exact scenario ..
    Siva

  • Block Order TECO on the basis of operation User Status

    Hi Experts,
    I am trying to restrict the TECO of maintenance order on the basis of order operation status. I have configured the user status profile and assigned it to order operation. This user status profile have two statuses, INCL - Incomplete and another is CMPL - Complete. I have prohibited the TECO for user status INCL. But when I create an order and try to TECO, the system allows me TECO it enenif the operation user status is INCL.
    Could you Pl. tell me, have I missed something in configuration?

    Dattatraya,
    Actually you can control TECO by completion confirmation of order operation as PCNF ( partial confirmation) for operation which you have mentioned in Order. So you can set up in configuration like allow TECO only once CNF ( Full confirmation ) for all operations mentioned in Order.
    For your mentioned scenario , I dont feel based on user status you can stop the TECO, anyway you can check with other experts as well.
    Riyaj

  • Displaying Work Order System and User Statuses in IW37 Search

    I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
    David Macindoe

    David Macindoe,
      That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
    Regards
    Narasimhan

  • Hoe to see if an USER-Status of service order is changed

    Hi,
    for service order we use a user-status profile. Every things worcs as we want.
    Now the question is: how can i see if the user-status is changed?
    First i use IW31 to create an service order. Next day the user-status will be changed (IW32).
    Where can i see, that it is changed?
    Regards, Dieter

    When user and system statuses are changed, records of JEST are updated and records are inserted into table JCDS, check this table.
    - JEST - current status
    - JCDS - log of status - with date/time/user
    In transaction IW32/33, you can see the history of statuses: click on "information" icon in status line, then on "display status" screen, go to menu : Extras, Change document, All or For a selected status.
    Regards,
    Raymond

  • User status profiles for work orders and sub-orders

    Hi Experts,
    I have the following question regarding status profiles for SAP PM work orders (but I guess it relates to all user status profiles).
    Customizing
    A status profile is defined for order type "PM_A", which contains an authorization key "OP" for certain user states (to be set by the ordering party)
    Situation
    The ordering party A creates an order of type PM_A for contractor B, and B then creates a sub-order of type PM_A for contractor C
    Problem
    - If I assign the authorization key "OP" only to roles of party A, then party B can't set the user states reserved for the ordering party (correct for the order A->B, but not for the sub-order B->C)
    - If I assign the authorization key "OP" to roles of party A and party B, then B could set certain user states reserved for the ordering party in the order A->B, which is also wrong
    Question
    Is there a way to restrict sub-orders differently than "non-sub-orders", or do I have to create a "sub-order order-type" for each order type, in order to assign them different status profiles and authorization keys?
    Thanks a lot!

    hi
    since you have 3 roles to be assigned to the same order type with different authorization ,it is better you create an seperate order type for sub order and assign the user status with authorization for B and C
    regards
    thyagarajan

  • Can the user status profile function as system status profile?

    HI,
        One more question about the status profile..I create a status profile and assing it to a order type.After that,I create a PO using this order type..
        Do we have to manually check the status "check box"in CO03 or we can make it automatically,(like the sytem status profile.When the components are withdrawed or goods recive,the status could change automatically?)thanks..

    Hi
    User status also set automatically as you set in BS02 according to Business transaction
    for ex if initial user status is STA1 as default and you set to change on confirmation of order then as soon as you done the confirmation of order it would set as STA2 automatically

  • User status erof is active (ORD 900000000000)

    HI All,
    I am getting the following error message when try to do actual settlement for production orders at CO88.
    "User status erof is active (ORD 900000000000)"
    Could anyone tell me what happend and What should i do to fix it ??
    Thanks & Regards,
    Manju

    Hi,
    Obviously in your system you are using user statuses in production orders.
    I don't know this specific "erof" status, since it is particulary defined in your system only.
    Via user statuses we can control the processing flow of production orders, in a specific way. In your case this status is defined in such a way that it will not allow settlement.
    The simplest way out is to edit the order and manually change this status, if this is not disabled by the same status!
    Regards,
    Mario

  • Config User Status to the Equipment Master User Status

    All,
    I created a user status profile and assigned the same user profile to a sales order item category and also an equipment master. I was hoping that when I created my sales order and selected a user status and then saved the order and also delivered and PGId the delivery. I was hoping since it's the same user status profile that my equipment master would get updated automatically but it didn't. Is there anyway to do this that anyone knows of without using a user exit? Thanks for any help in advance.

    Hi,
    For single equipment, there would be "n" number of PM orders. While doing MIGO, PM order status will be changed by automatic. Why do you want to change the Equipment Status? How do you want to change the status. Please elaborate your concern.
    Regards,
    Maheswaran.

Maybe you are looking for