Print booklet truncates right side of page in Snow Leopard

I'm trying to upgrade to Snow Leopard, but my InDesign booklets clip the right side of a spread at 8-1/2 inches. I'm using an 8-1/2 x 11 paper size, landscape, with InDesign pages 8-1/2" tall and 5-1/2" wide.  The booklets print fine in system 10.5.
I can print regular landscape pages fine. It's just the Print Booklet output. The Preview shows it as being correct.
I thought it was my 10 year old Laserjet, but I just installed a new Laserjet and it has the same problem.
I thought it was a problem with InDesign CS3, but I just downloaded a trial of CS5 and it has the same problem.

Hi writingnorth,
Is that the right hand side of the page after removing it from the printer?
Is the text on that side missing or is it compressed? 
Does the printer show any error messages?
Also, please try the printhead clean to see what happens.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Colorlaserjet 1518ni printing misalignment on right side of page

    Cyan printing is skewed on right side of page

    Hi Mmmmmmk, 
    Calibrate the printer
    Follow these steps to calibrate the product.
    Open ToolboxFX .
    Windows XP: Click Start, click All Programs , click HP , click your product, and then click HP Color LaserJet CP1510 Series ToolboxFX .
    Windows Vista: Click the Windows icon, click All Programs , click HP , click your product, and then click HP Color LaserJet CP1510 Series ToolboxFX .
    Click the Device Settings folder, and then click the Print Quality page.
    In the Color Calibration area, select the Calibrate Now check box.
    Click Apply to calibrate the product.
    NOTE:Calibration might take two to three minutes. Do not turn the product off during calibration.
    When calibration ends, try printing again.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Print Booklet to PDF in Indesign CS5 on Snow Leopard?

    Moving our 200 clients over to CS5 and Snow Leopard and finding out that our one coarse creates booklets and during testing it was noticed that you can't create a pdf from a booklet.
    How does one do this under Snow Leopard now??
    Thanks,
    Dan

    Yea but look right below your circle.  Everything has a white background and looks like it was just thrown there.  Its a wonder they didn't make the "User Accounts and Family Safety" text the same blue color as the other stuff.  Luckily the icon is there to help but its hard on the eyes in my opinion.
    In OS X System Preferences aka Control Panel its far easier to get around in.  If it was Windows 7 it would all be a solid color....see how Personal section is lighter than the Hardware section and it then flip flops as it goes.   Looking at the Windows 7 Control Panel and other things its just a bad visual design.
    But this isn't the place to be talking about this so this will be my last post unless its about PDF printing and Snow Leopard.  Thanks.....

  • Web pages are printed incorrectly, i.e. left side of page in p.1, right side on page 2. This started recently. Correct printer is identified.

    Firefox recently updated. Now, printing a web page results in left side printed on p.1, right side on page 2. Using the same Canon D9000 printer. Selecting horizontal format causes the left side of page to be printed 1/2 size on 1/4 page! Printing same web page with IE is OK. Printing from MS`Word is OK.

    All web pages? Or just some? Example of a page where that happens?
    Do those pages have '''Frames'''? <br />IOW, is the '''Print Frames''' section in the print dialog available (not greyed-out) for selecting '''''Each frame separately'''''?
    If that isn't a Frames issue, my advice is to do the '''reset''' described here. <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer <br />Make sure you reset all the prefs for that particular printer.

  • Laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly.

    laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly. i've cleaned the assembly a few times beofre to restor the colors as the printer is in a semi-dusti environment.  after cleaning the printer was fine, then about a week later, the black - and only the black - stopped printing on the right side of the page.  the text is straight across left to right then starts to waver and then then stops altogether.  i tried a different black toner cartidge and the problem remains.

    > so this is strictly a hardware issue as no drivers are involved. Yup. > Still prints all black.   Ok its not the controller. > Still prints all black.   Ok its not the fuser. >  its still prints all black. OK its not the laser itself > it still prints all black. Not that part either. > What else left is there?  Formatter board hasnt been mentioned.  Something is sending a command to the printer that is telling it to open up the doors and charge the entire page.  Normally the laser is responsible for charging the media.  As the media passes over the toner doors it atracts toner particles.  Then as the paper continues it rolls past the fuser where heat melts the particles into permanent place. > The power supply board maybe?   Perhaps but not likely.  If you have a spare you could try it but power supply problems usually result with the machine unable to boot or print correctly, not printing too much as you have described here. > Is there another part you would reccomend I look at?
    You could try the old Halfway test just to verify that the problem is coming from teh laser/toner part of the printer.  http://www.printertechs.com/printer-troubleshooting/halfway-test Your paper may have somehow gotten a staic charge that opposes the charge of the toner, thus auto attracting all particles in range as it passes over the toner doors.  Might want to grab a fresh ream of paper to test and rule somethign crazy like that out. Not very many options left after that.     

  • Red ticks down right side of page

    Hi I am getting red ticks printing down the right side of the page. Nothing I can find so far has gotten rid of it. Still under warrantee but no support #'s are offered. Any one have any ideas? It aslo keeps telling me it needs papaer when there is plenty.

    Hello elliegilles,
    Welcome to the HP Support Forums!
    Have you just changed a toner in the printer and now the issue is present? I suggest the steps offered here: Troubleshooting Print Quality Issues, mainly the align and cleaning.
    Also, would it be possible to upload a scanned image so I can see these red marks?
    Thanks,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

    I have a HP Officejet Pro 8500A.   I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded.    The paper is 5X7 when folded, 10X7 laid flat.

    shgilljx,
    Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.  
    Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
    To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
    Text template: The text will be printed on number 2.  That means your wording must be within the bottom half of the page.
    Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
    Print the text template. Insert side #3 into the printer. The text should print on side #2.
    Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
    When folded, all should be correct, if I did it right.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Button at right side of page.

    I want to add a button at Top right side of Page. I want to go with Page Button because they have behaviour to add top and bottom of Page.
    I dont know why Horizontal alignment property for submit button is not working .
    Thanks ,Avaneesh

    put this button into rowLayout region.
    and then use spacer item of this region to aligen this button

  • Printout are printed to the right side of the paper

    Printout are printed to the right side of the paper
    all other settings are ok but the text is printed too much to the right side

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • So, I've taken my panasonic printer back to the shop and exchenged it for a Canon MF-4430. Alas... the generic drivers do not make it print. Is it possible to get drivers to make this canon printer work with my lovely Mac Book Pro Snow Leopard, 6.8?

    So, I've taken my panasonic printer back to the shop and exchenged it for a Canon MF-4430. Alas... the generic drivers do not make it print. Is it possible to get drivers to make this canon printer work with my lovely Mac Book Pro Snow Leopard, 6.8?

    I could not find a MF-4430 at the Canon site. Are you sure the model is correct? They have a MF4450. The Mac drivers are here:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf4450#DriversAndSoftware
    If you are sure you have a MF4430, look around the canon site for the drivers.

  • Pages for Snow Leopard v10.6.8

    Where can I download Pages for Snow Leopard v10.6.8?  I was about to download it from the App Store but then realised that Pages '09 v4.2 requires OS X v10.7.4 or later.
    Thanks.

    Nowhere. You need to either purchase the DVD version or upgrade the computer's OS if possible.
    (69280)

  • M1319F MFP printing errors - line on right side of page

    I've had HP LaserJet M1319f MFP about 1.5 yrs.   Last week, it began putting a page-length, thin line on right side of every copy. Line is slanted, about 1/4" from the side, and gradually becoming 1/2" from the side at the bottom of an 8 1/2 x 11 pg.  I ran pre-moistened laser printer cleaning paper through, same line on the cleaning paper.  I cleaned the scanner glass inside.  I removed the brand-new genuine HP laser toner cartridge,I cleaned it, reinserted the cartridge, made a copy, same line appeared on paper.  I removed the cartridge and replaced with a new cartridge.  I made a copy, same thin line appeared on copy.  This happens with copies only, not with scans or printouts. 

    What browser are you using? Try downloading a PDF if one is available, or try printing from XCode's Deveoper Documentation window.

  • Emails print off yhe right side of the page and I lose part of the message.

    In Safari emails run off right side of the page when printing.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • HP Envy 4500 cuts off right side of page

    When I print a Word 2010 document, the right side of the page is cut off.

    Hello Yonniehere,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer cutting off the right side of the page.
    Does this only happen when printing in Word or does it happen with other programs? 
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Write me back when you have time and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Hp printer cuts off right side of paper

    Hello,
    I am new to this but I have a problem that needs to be answered pretty quickly please, when I try to print out an email the right side of the email gets cut off, I checked the printer setting and even the preferences but everything is alright, nothing wrong there, but every time I print I happens. Also when I go to print out a picture the picture turns out yellow, please I tried everything I could think of.
    This question was solved.
    View Solution.

    Hi - Can you provide the model of printer you're using?  That will help determine what steps to take to troubleshoot.  Typically though, when the print out is being clipped or cut off, it has to do with a paper size mismatch between the printer driver software and the settings in the software you're using (i.e. MS Word).  Make sure that the paper size settings in the sw (typically under page setup) match those of the printer (typically under printer setup).
    As for the color issue, the first step will be to run a self test page on the printer to determine whether it is an issue with the ink cartridges.  How to run the test page from the printer is dependant on the printer model.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

Maybe you are looking for

  • Batch management - Shelf life and Production date

    Hi All, I am working with batch management where i did all the setting of characterestics, Batch class and neccessary settings. i am working with three characterestics shelf life expiration, production date and last goods reciept. I have to active sh

  • Unusual numbering issue

    Hi - I need to set up document numbering in an unusual way. I need the pages to autonumber normally but to be able to apply a different master page or style to the occasional page to get the previous page number followed by a line or long dash. Ex. 1

  • EMAIL!! NEED YOUR HELP

    I have many different email accounts, school, work, personal... Is there any way to combine all of them into one. I cant seem to find forwarding options on my hotmail accounts. Is there something i can do through mac or just create a new email throug

  • 譲渡について

    ADOBE ACROBAT 7.0 Standard(以下ACROBAT)が付属するPFU製ドキュメントスキャナをヤフオクに出品する場合.ACROBATはそのまま付属させ.落札者がそのまま利用できるのでしょうか?

  • Sumifs function question

    Hi, Everyone, I have a function question of Sumifs, here a sample as follows, =SUMIFS(Budget :: E4:E14,Budget :: C4:C14,"=5003677000",Budget :: B4:B14,OR("=Transit","=Drawing cash")), according to the logic, I think like this, but it's wrong. So how