Print Button in CrystalReportViewer 64-bit x64 VS2005 does not respond

Hello,
I'm using the CrystalReportViewer-Control comes with VS2005 CR.
When I deploy the application to a W2008 R2-System the print button shows no response.
I'm still installed the CR-Runtime for x64 Systems on the Target-Server: CRRedist2005_X64.msi
For testpurposes I installed a VS2005 on a W2008 R2 Server. On this platform I installed the CR-SP1-Patch for the environment: crvs05sp1.exe. After that the print button responds on the test-system.
Then I created a setup project on this test-system with mergemodules: CrystalReportsRedist2005_x64.msm and deployed it to the target-server. But with no success. The button does not respond. It is not important for me, wether I deploy the CR-Runtime on the target-servers with the CRRedist2005_X64.msi or with a own setup-project. Because there are only six servers must be deployed.
Any ideas? Thank you in advance
Rolf

The CRRedist2005_x64.msi with Date 10/24/2007 is good. So we need to look for other issues. Are you using the ActiveX print control? If you are then the control must be downloaded from teh SAP website. There should be a directive for that in the web.config (assuming this is a web app). What you may need to do is documented at the below link:
http://msdn.microsoft.com/en-us/library/ms225384(VS.80).aspx
The print control cab file is here:
http://support.businessobjects.com/CRforVS2005/PrintControl.cab
Also, see if kbse #[1356727|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] will help here.
2) Popup blocker in play?
3) Is this a new app or an upgrade?
Ludek

Similar Messages

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Perl Flip 8230 & XP 64-bit - Desktop manager does not respond

Greetings.
I am using a brand new Perl Flip 8230 (black), along with the new software (the CD has a timestamp of 2008.12.18, well after the last update of 2008.11.17).
When I install the software, it claims to be the 4.7 version, but I am having quite a few issues with it. First of all, while all the drivers install nicely, and the phone is recognized by the connection software, I am unable to *properly* launch the Desktop Manager.
An inital launch (click on icon) of the Desktop Manager causes it to appear in the Task Manager, but it never ends up showing up on the screen. I even tried waiting for 1/2 hr, no dice. A second attempt at launching (without shutting down the process first) does cause it to appear, but it ends up completely unresponsive. There is still only one executable in the Task Manager (the second attempt did not launch a second copy), but what exists on the screen does not respond to any actions.
The window that appears is almost completely blank - the dark grey background-image is visible, but pretty well no other text or icons of any kind exist aside from a large "Menu" at the upper left, which is also nonresponsive. As well, trying to close the window by using the red X at the upper right is completely unsuccessful. In order to close the program, I need to go to the task manager, find the process, and "End Process Tree". Nothing else works.
Finally, the window that does appear also has a version number at the bottom in tiny text - version 4.5 of the desktop manager. HUH?!
I tried to install a downloaded version of 4.7 (in case there was a mix-up at the factory), but it claimed that a newer copy of the software was installed. Somehow "4.7" is older than "4.5". Strange, that. Selecting the "desktopmgr.exe" file to run in compatibility mode as plain old "XP" also does not work.
I tried to repair the installation, no dice. I have now uninstalled the software in preparation of using the 4.7 version straight from the Blackberry website. I will report back on how well that works.
As a final note, I am running Windows XP 64-bit, with the latest service pack (SP2) and all the latest patches and updates (SP3 does not exist for XP 64-bit). I cannot install the software on a 32-bit version of XP because I do not have XP 32-bit on any of my computers. Nor do I have Vista (either 32-bit or 64-bit). I have Linux (5 computers), OpenBSD (3 computers), OpenSolaris (1 computer), Windows 2003 64-bit (2 servers), Windows 2008 64-bit (1 test machine) and several other experimental platforms (HaikuOS, BeOS, etc.), but no XP 32-bit. Sorry.
My other half's computer is an older 1Ghz PowerPC4 iMac (2nd gen iMac - "lampshade" model) running 10.4 (most recent update), but that computer is not one I want to use. I am also unsure if the Blackberry software is capable of running on PowerPC Macs, as it may be Intel-only (I haven't had a chance to check yet).
If someone has any idea why my Desktop Manager is completely unresponsive, please help.
And yes, I did reboot after installation. I seriously doubt that this is an ID-ten-T error. PEBKAC does not apply!!

An installation of the downloaded 4.7 software did not function; all symptoms were idential to the version supplied on CD.
I am shutting this thread down in favour of a post in a more appropriate category. Please provide any replies in that thread.

PS CS6 64 bit hangs and does not respond

On Windows 7, PS CS6 64bits hangs onto a side of desktop and does not respond as it launches. No error messages. 32 bits works fine. PS5.5 64 bit works fine. Only the regular windows 7 updates (no driver updates or other program updates other than Adobe Acrobat Reader) have been installed since I installed PS CS6 extended. Any idea what is happening? Worked fine for awhile.

It it worked fine for awhile then failed I would reset the preferences.
Start Photoshop and IMMEDIATELY hold down the Ctrl +Alt + Shift keys. You should get a reset window. If you see the splash screen you are too late.

My ipod's home button does not respond, how can i fix it?

3 days ago my ipod home button stop working correctly and now it does not respond at all and i cant neither open or close an app
how can i fix it?

Try restarting you iPod Touch, if that don't solve the problem you should take it to the Apple store for service.

I bought an HP 2050A deskjet. Loaded via CD PC does not respond to the printer please assist me

HP 2050A Deskjet Printer. Operating system Windows XP SP2 pack.
PC not responding to printer, i loaded via CD. had uninstalled it and reinstalled it , still does not respond.
Kindly help.

Hello metehangunaydin,
Please try the below steps so that you may atleast be able to print.
1.Click Start button on the Computer .
2.then click on Control Panel .
3.then Printers and Faxes
4.On top-left, click on Add a Printer
5.Click on Add a Local Printer
6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
Now try printing . It should work.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Printer does not respond; green checkmark on icon

Canon PIXMA iP1700 printer does not respond. On control panel printer has a green checkmark. Says ready but does not print.

Hi clk,
To ensure the most accurate information is provided, please let us know the version of Windows you are using. Thanks so much! If this is a time-sensitive matter, please use the link below to reach out to our technical support team:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

it might be a malfunction in your device. you might ave to send it to repairation
1.ave you try resetting it or restoring it?
2. did your hold boutons whas working beffor?

Is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.

Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!

Button does not respond (with attachment)

Hi,
I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
I attach the program for you to look at.
Any help/hints much appreciated.
Thanks,
Dave.
Attachments:
MouseCoordinatesForPW.vi ‏178 KB

altenbach wrote:
Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
Message Edited by altenbach on 05-22-2007 09:23 AM
Hi, thanks for your reply.
The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
"Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
- The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
"Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
"Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
- No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
- Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
"Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
- I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
Thanks,
Dave.

HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

Check the status of your warranty here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make a Genius Bar appointment to have your iPhone checked:
http://www.apple.com/retail/geniusbar/

Photosmart C6180 on wireless network does not respond when attempting to print

Photosmart C6180 successfully installed on wireless network does not respond when attempting to print. All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print. Get no error message other than document failed to print. HELP!

So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

TS1559 wi-fi does not respond ; in settings when i get to screen: chose a network even that wi-fi is on the whole screen freezes and does not respond to touch. i have to press home button to go out. settings point is not coresponding either (in top left c

wi-fi in settings does not respond to touch, page becomes frozen and i have to out from it with home button. can not choose network or anything on that screen!?

noelani72 wrote:
I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
Message was edited by: noelani72
Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
Good luck.

Print Button in CrystalReportViewer 64-bit x64 VS2005 does not respond

Similar Messages

Maybe you are looking for