Print button not working with Xerox pluggins installed

Thanks to the wonderful people here I found that if you have any Xerox plugins in /Library/Printers/PPD Plugins you can experience the print button not working.
Removing them fixes it which is nice but I need the plugins, anyone know a work arround?

I've seen this happen with some of our Xerox PPD's on PC's. The cause in this case, is their reference to virtual memory with older OS systems.
I instead used an older PPD or a PPD I had edited to support 200"x200" custom pages sizes, supporting full color.
All I needed was a clean postscript file.
The Adobe 7 PPD writes clean PS.
If you need some kind of VIPP instructions in your PPD for the Xerox, I'd look at getting a newer PPD form Xerox made for OSX.

Similar Messages

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

My HP photo smart C6280 printer does not work with CS6. Any Help?

My HP photo smart C6280 printer does not work with CS6. Any Help?

How does it "not work"?
What OS version are you using?

Flex Print Job not working with custom component

Hi All,
I have to print pages with header, body and footer. So the thought process was to create a custom component fro header, footer and body. Header component is based on Box, Body is a renderer (which will have fix value of items - and will decide the number of possible pages) and footer is again based on Box.
But when i created a simple Custom component like this for header
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:fx=http://ns.adobe.com/mxml/2009
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<fx:Declarations>

</fx:Declarations>
<mx:HBox>      <mx:Label id="testLabel" text="Test Container"/>
</mx:HBox>
</mx:VBox>
Then when i try to add this to FlexPrintJob, and save it as 'xps' to see the print output, i get error message that this file is in use or damaged.
    var myPrintJob:FlexPrintJob = new FlexPrintJob();
if(!myPrintJob.start()){
      return;
var header:Header = new Header();
header.width = myPrintJob.pageWidth;
header.visible = false;
FlexGlobals.topLevelApplication.addChild(panierPrintHeader);
myPrintJob.addObject(header);
myPrintJob.send();
FlexGlobals.topLevelApplication.removeChild(panierPrintHeader);
But this does not work and i get the above mentioned exception. Now when i not use the custom component and just have a label or HBox or anything on stage before the print functionality is invoked, it works fine. And this too haapens only if you have a mxml component, i tried by creating a new Label component using actionscript and then provide the same to the printJob, which did not work either. I need help on this, else i will have to take print functionality to server side(Java) which has some business implications, the reason why i am spending time on flex for printing.
Thanks and Regards,
Jigar
Looks like custom component print is not working fine with flex or i am doing something terribly wrong.
Looking forward for help.

Is there nobody in flex community who can help on this....
Looks like a toothless class that adobe actionscript team has provided, which is not liked across much

Sharepoint send to button not working with document mode 9

Hi All,
We are using document mode 9 for HTML 5 in the master page but the SharePoint send to button is not working with ie 9.
Can anyone help me to resolve this issue.

SharePoint 2010 doesn't use HTML 5, so its possible that the browser is running in quirks mode. Try the default compatibility mode and see if that works for you.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

My printer does not work with mountain lion

I recently upgraded to Mountain Lion and now my HP Officejet Pro 8600 printer does not work. I downloaded the required driver from the App Store but am still not able to connect. Is there actually a solution for this or do I need to find a way to downgrade my OS to one that is compatible with my printer?

From the HP site:
Compatible operating systems
Microsoft® Windows® 7, Windows Vista®, Windows® XP (SP3)* or higher (32-bit only): *Supports 32-bit only; Mac OS X v 10.5, v 10.6 or v 10.7; Linux (For more information, see http://hplipopensource.com/hplip-web/index.html)
But then also on the HP site they have drivers for the printer for 10.8. See here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4323659#N194
I would try the driver from HP.

MBA 13" media buttons not working with iTunes

I just got my mba 13" and everything is great, but for some reason the media buttons do not work with itunes. I've tried them with vlc and other applications and they work fine. Any ideas how I can fix this?
Thanks!
Danny

(n_n) wrote:
Hi,
No, it didn't work fine with VLC. Whenever I pressed "play/pause", it'll trigger iTune and the media buttons become the controller for both applications at the same time.
What the %^&*..
Cheers.
Reset PRAM.

My printer does not work with firefox but does work with explorer

While using ebay I tried to print out a mailing label, and fox fire does not work with it anymore. My printer does work with internet explorer ?

What printer? Does the page appear correctly in Print Preview? What happens when you try to print?

My canon printer does not work with firefox12

my canon printer does not work firefox 12 edition

Try to reset the print prefs.
See:
*http://kb.mozillazine.org/Problems_printing_web_pages
*https://support.mozilla.org/kb/Printing+a+web+page
There are other things that need your attention.
Please Update to the latest Firefox 17.0.x version.<br />
The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version

HP Smart Print button not working

I have IE9 and installed the HP Smart Print with Bing bar from HP download page and activated Smart Print as mentioned on download page. But when I go to a site and click th Smart print button, nothing happens.
I tried it on different sites and it never works. What can be the problem?
Moontje1
This question was solved.
View Solution.

I solved the problem myself. Add-on was not activated. I activated it and restarted my browser : problem solved

Why is my page orientation button not working with the new update to pages?

Since I have updated my pages my print orientation button is not working. amy ideas as to why that is and are ther many people with this problem???

We are all busy with many other problems in Pages 5.
Unless you have found some real reason to use Pages 5 just go back to Pages '09 which should still be in your Applications folder, until Apple sorts this all out.
Peter

Printer does not work with Windows 7

I need help for printing with my HP Deskjet IA 3545 eAiO printer.
I cannot print with my laptop running on Windows 7. I have tried uninstalling and re-installing countless times over the past 3 days using the accompanying CD as well as trying to get the latest driver updates from the internet but all failed to print. I have also tried using Wireless Direct but that did not work as well. The printer printed the internal page when I ran the HP Printing and Scanning Doctor tool.
I have no such printing issue with thsi printer model while using my desktop and other laptop running on Windows 8.1. This Windows 7 laptop prints smoothly however when I switch to my Brother DCP-J315W and Canon LBP7100Cn printers.
Windows Updates lets me know there is one important update for the driver for this printer but for some mysterious reason the Windows 7 laptop just will not accept the down-loading and installation operations for this particular update.
Please assist me.

Hi there @YuLen ,
Welcome to the HP Forums
I read your post about how your Deskjet Ink Advantage 3545 is not completely functioning on your own computer running Windows 7 however, another computer functions fine with the printer, and the printer will also print out test pages successfully. This seems to sound like an operating system issue so far, and I have some ideas in mind for you to try out that might help.
1. Run the Microsoft Fix It Tool to uninstall the printer.
2. Restart your computer.
3. Perform a Clean Boot.
4. Restart the PC again.
5. Run Windows Updates: Use your Start menu to check for updates
6. Download and run the full installation here: HP Deskjet Ink Advantage 3540 e-All-in-One Printer series Full Feature Software and Drivers
7. Try printing now!
If there is still an issue with performing the Windows Updates, contact Microsoft: Microsoft Support Forums
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP 8150N Printer still not working with Snow Leopard

I went to the Hewlett Packard page for a new driver and was told the new driver for my printer was included in the Snow Leopard update. I'm sure it is, but my computer can't find the printer. I've used advice from other discussions and tried what I could with the "Print & Fax" feature on my computer, but so far, nothing works. The printer to a network with two other computers in my office. Any suggestions would be helpful. Thanks in advance.

I believe this to be a "generic" statement since the support agent did not know what your problem was. I have double checked, and there are no known issues with the driver for the 8150n (at least none that engineering has been informed of and is working on).
I fully believe the problem you are experiencing is due to the lack of AppleTalk in Snow Leopard.
First print out the IP address of your printer by printing the configuration page. You may also be able to get this information on the front panel if you dig.
Second, open up the print and fax control panel and click the + button to add a printer. In the add printer window that opens, select the IP button at the top, choose the protocol of HP JetDirect - Socket, and then type the IP address of the printer. If the OS automatically selects the right printer driver (and not Generic PostScript) you are good to go. Click Add Printer and happy printing.
If it doesn't auto select the right printer then your printer probably does not have an IP address that is routable from the Mac. The easiest way to get the printer to grab a new IP address is to cold reset it. Cold Reset the printer by powering it down and then powering it back up while holding down the GO button.
This should force the printer to grab a new IP address. Follow the above steps again to add the printer, and away you'll go.
One drawback of this method is if you have a network that keeps changing and a DHCP server that doesn't reserve IP addresses for devices it is possible that the printer at some point in the future updates its IP address and is no longer reachable. If this happens, simply repeat the steps and you'll be all set. The other alternative is to assign a static IP address to your printer, but that takes a bit more work.
Just trying to help.
Andrew

Print button not working with Xerox pluggins installed

Similar Messages

Maybe you are looking for