Print central will not work

Have tried everything.print central and print central pro will not print anything.

Joseph,
I have Print Central on my iPad and fortunately for me, it worked immediately. One thing Print Cenral does offer is technical support, so Meg's suggestion to contact them would be the best option. Of course, I'm sure I don't need to ask these questions, but you do have a wireless printer, correct? You are connected to the internet through your router when attempting to print? And you are using the same router the printer is connected to, right?

Similar Messages

Computer print option will not work.

I have a HP Pavilion, Windows Vista. This just started happening about two weeks ago. Whenever I select the print option, i am automatically taken to "SAVE" as a file and if I decline and cancel save option the print option is not available. If I save as a file , I still am not able to print. I think this is a SETTING problem since I had a guest on my computor a few weeks ago. I think the settings have been changed but i don't know where. Can you help?

Hi icantcu, welcome to the HP Forums. It sounds like you have either the "Microsoft XPS Document Writer", or a "PDF Writer" selected as the default printer. What printer do you actually have? Is it an HP printer? Using a restore point as wb2001 suggested will most likely resolve it. Just before you try that however, take a look at this possibly quicker fix.
Try going into your printers folder to see if it is listed there. If it is (and the icon is not faded out) right click on it, and set it as the default printer. That will place a green check mark on it. Then try to print again and let me know if it behaves the same way. How To Change Your Default Printer
If the icon is faded out, or if there is no listing for your printer you might have to reinstall it, or follow through the previous solution offered.
Let me know if this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Finger print reader will not work with password manager

i have the finger print reader working fine to log into windows but when i select advanced options for a password protected site in password manager,and custom security level ,when i click on protect with finger print,it says i have not enrolled any finger prints with client security solution,when i check the fingerprint tab in client security solution it shows my fingerprints what i have stored,why is this conflict happening?when i check my web email i want to be able to swipe my finger and log in not keep typing my password in,anybody know how to sort this??

Hi,
I have the same problem, help me please.
I have the 3000 N200 notebook, when I use the finger print to log on using the windows vista logon it work fine, but if I try to use it with ThinkVantage technology (such password manager) it told me that the device is not installed.
(Sorry for my english.)

My print setup will not work and Fire fox only prints blank pages. Help?

I tried to change the margins on my printer set up. Since I did this my printer will only print blank pages from Firefox. (If I open a PDF it prints fine) I have tried to go into print set up but it only comes up as a big black page. Any thoughts??

Sorry, just to be clear:
(1) Which did you use to make the change and which do not display correctly:
orange Firefox button > Print > Page Setup<br>
''or''<br>
classic File menu > Page Setup, or
the Properties button in the Print dialog?
(2) If you switch to a different printer, such as a PDF printer driver (many free ones you can install, such as [http://www.primopdf.com/ PrimoPDF] and [http://www.cutepdf.com/products/cutepdf/writer.asp CutePDF Writer]), can you regain access to Firefox's Page Setup dialog?

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

Ooops I put the lot in the strap line!
My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
I would be grateful for help!! Obviously...

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

P1102 will not work as RDP printer

P1102 will not print as redirected printer on Windows Server R2 Standard SP1 X64 terminal server.
We have downloaded latest 2008 x64 driver but will not work.
P1102 local network printers will print from network but not as RDP printers from the same terminal.
Tried to instal the P1102 on the actual Server itself but it will not instal as a USB printer on the server?

You have a lot of learning to do. The overlap between interactive PDF and
DPS is not all that great. Start with the DPS help here on Adobe.com and
download Bob Bringhurst's DPS Tips app in the app store.

Since upgrading to OS X yosemite my printer will not work.

Since upgrading to OS X Yosemite my printer will not work.

I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd

I upgraded from leopard to lion and my epson printer will not work. I get a communication error

I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

We set up Airprint to our Xerox machine but we have codes set up so each department has to enter their code in before they print. Airprint will not work because we have the codes. Does any one know if there is a way to override this?

Hello there-
Our Xerox rep helped us set up Airprint to our copier machine. We have department codes set up on our copier so when any one goes to copy or print something they need to punch their code in. Airprint will not work because we have those codes (something prints out to the copier saying error due to accounting codes being set up). Does anyone know if there is a way to override this on our ipads? Thank you!!

Hi Nico,
if you want a local test/development setup of Oracle why don't you just install Oracle 11gR2 XE (http://www.oracle.com/technetwork/products/express-edition/downloads/index.html) ?
If you install this you get a database, APEX (4.1), client etc all in one install, this includes a webserver (EPG) on port 8080 without having to configure anything. It's a simple next-next-next installation without much configuration.
If you would like to seperate database and software you can always do this later when you understand the concepts of database/control files etc.
If you would like to upgrade to APEX 4.2 you can download this afterwards and easily install this by running two scripts in SQL*Plus ( apexins.sql and apxldimg.sql ), just check the apex 4.2 installtion guid section EPG for this.
Regards
Bas
b.t.w. If you're running windows 7 - 64 bits just use the 32 bits XE for windows, might get some warnings but you should be able to install and run, good enough for test/dev

Connected Deskjet 6940 to computer with windows 7 64 bit, duplex print will not work?

I have a Deskjet 6940 model C8970A. The Duplex printer function does not work. It will manually ask me to turn around all the pages to print on the other side. Before it would print front then back of page at a time. I have Windows 7 64 bit on the new computer.

Hi,
The Duplex Unit is disabled by default, make sure to enable the accessory as following:
Enter Control Panel > Devices and Printers
Right click the HP Deskjet 6940 icon, then click Printer Properties.
Select the Device Settings tab.
Set the Duplex Unit as Installed, click OK.
Now set Print On Both Sides as Automatically from the Printing Preferences Dialog.
Please let me know if you may still experience any issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cancelled print but will not cancel and comes back on to print same job

cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?

Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

Print central will not work

Similar Messages

Maybe you are looking for