Print code to Movement type

Hello All
For Movement type 101 we used to print transfer Order - Print code 1 . Now are going to start Label printing as well print code -Z1 . As we can assign only one print code to perticular movement type we are not able to Print Tranfer Order . Is there any way to print both Tranfer order and Label both .
Many thanks for help in Advance

Hello All
Thanks for feedback, But I have already done all these . Problem is even after assigning Label Form Name , I am not able to Print Labels .
OMLV - for Print code i have assign both TO form and Label Form .
and that print code assign to Movement Type 101 .
Is there any specific setting which i am missing .
Most important thing is when i assign either TO form or Label Form one of those it work , i mean it print automatically , but when i assign both it print only TO form and Not Label .
Many Thanks for coming back regarding the same .

Similar Messages

  • Print out  for movement types

    Hi Friends,
    How to  configure print out for movement type 561 or for scrap ?
    Can you pl tell me step by step where and how to configure?
    Appreciate your help.
    Thanks,
    Venkat

    Hi Venkat,
    What you want to print. if you only want to print out the transaction done thr movement type 561. If you are not going through any development then follow the under mentioned process :
    Go to MB51- Select the material, Plant & storage location- put the movement type 561 & 562- select the ranges of date- execute it. System will give the report. Then for print out go to List tab and select the print. After clicking on the print tab, you have to fill some informations like- Output device- Put Locl then No of copies-then click on continue. System will give you to select the printer. Just select and print.
    If this is enough then ok otherwise inform me.
    Hope this will clear your issue.
    T & R,
    Brijesh

  • Output Print for MIGO movement type-107.

    Hi All kindly help me in resolving the following issues:-
    There is the requirement of printing RF Label while saving the GR from PO in movement type-107.
    Help me to configure the output type in this case.
    How the data flows from MIGO transaction to the ABAP program and finally to the printer ?
    How to link the output type to the transaction MIGO and so in movement type-107 ?

    Hi,
    go to spro-Materials Management-Inventory Management and Physical Inventory-General Settings.
    in General Settings print version migo is 2 .execute after Maintain Print Indicator for Goods Receipt Documents check 107 mvt type.
    refer the below link
    Print material document (WE02) automatic when GR
    Regards
    Raj.

  • TRANSACTION CODE IW31 MOVEMENT TYPE

    Hi,
    when i create order in iw31, i m selecting order type depending on the order type my movement type in item data general tab the movement type should change , as per the customization its selecting the default movement type for differnet order type,
    An the initial screen say if select order type ABC the, I enter line item at 0010 after selecting the line item, and after going to general data tab, the movement type is say 123
    now say if i select order type XYZ and enter the line items and when i go to general data tab , the movement tpe should change to say 789,
    how do i go about which user exit i should use to modify this,
    you reply will be highly appericiated

    Hi Kadam,
    How you solve this problem?

  • GM codes for movement types

    Hi Friends,
    I need gm codes to be passed on to the bapi while posting movements. Could somebody help me with this. The movements are
    309
    916
    915
    913
    914
    Thanks,
    Kiran.

    Kiran ,
    1. GM_Code 01: Goods receipt for purchase order
    2. GM_Code 02: Goods receipt for production order
    3. GM_Code 03: Goods issue
    4. GM_Code 04: Transfer posting
    5. GM_Code 05: Other goods receipts
    6. GM_Code 06: Reversal of goods movements
    7. GM_Code 07: Subsequent adjustment to a subcontract order
    check ur Business Requirement.
    Regards
    Prabhu

  • How to post reason code/movement type from MM to FI document?

    Have had a request from our Finance guy here that when a movement is posted in MM (eg a scrapping), the reason code and movement type are to go onto the FI document when the movement is posted to the GL accounts. These values are to be viewed from FBL3N.
    He thinks it might need to be done with substitutions but I have had no experience in this area and he has no idea how to go about it. I have extended the COBL structure using OKX3 which has put the field into BSEG but have no idea how to go about doing the substitution or which exit to use. Inaddition in SAP standard, MSEG passes the movememnt type tyo COBL field BWART but then this seems to get voided.
    Can anyone help me?
    Regards
    Larissa Maryniuk

    Hi Larissa,
    Please go through with this below link. You can easily understand about Substitutions.
    http://techbays.files.wordpress.com/2008/08/sap-tip-how-to-use-substitutions-lakshman-tandra1.pdf
    Best Regards,
    Mohan.

  • Movement Type 124

    What would be the Reason Code for movement type 124 ( Returning the material from GR block Stocks).
    Note: i used movement type 103 to receipt material, I was also able to use 104 movement type for return GR block. But I can not do 124 MT, It was asking reason for movement, i used 0002, 0103, not a single one was working
    Edited by: Ehsan1234 on Oct 17, 2011 10:45 PM

    I am adding up....
    124 Return delivery to vendor from GR blocked stock
    Using movement type 124, you can return a goods receipt to GR blocked stock ( 103).
    Movement type 124 has the same effects as movement type 104.
    Due to some reasons like : Poor Quality,Package Damage, Qty Error, Wrong Material, Supporting Document Missed (Inspection sheet)
    So when you return the component you have to mention the reason, so that Vendor can understand what is the rework they have to do.. it will be printed in material document output also,,,
    Now in the config part in OMJJ,,Movement Tyoes
    Go OMJJ t-code. define reason for movement type 124 or remove required entry tick.
    OMJJ-Movement Type-From 124 in the field Control Reason if you maintain as Entry in this field is required- then you have to maintain the reason for the movements,,,
    Reason for the movements can be as per your Business scenarios,,
    Regards,
    Udaya.

  • Goods receipt for return PO - MB01-Movement type 101-161

    Hi guys!
    I have one problem with output determination for goods movement (movement type 101 with internal movement type 161).
    I used SAP Note 426554 and for as I know the output determination customizing is ok:
    output type WE03, collective slip, access sequence 0003 , condition table: 72 Transaction/Printed Version/Print ID, Transaction/event type: WE, movement type: 101 - 161, Print indicator: 1Material document printout – 2 Return delivery, Transmission time-spot of the condition record (1 to 4):1-3, print indicator (RM07M-XNAPR) is set manually and maintained as NDR parameter in user master record, Output type print parameter is Plant/storage location (7), printer determination is customized.
    At header level, the document created with MB01 with reference to a return PO, doesn't have the XNAPR parameter (don't know why - it is set when using MB01). It may be this one the reason for not having any output message to print. For movement type 101 (in reference to a PO) all works fine. Just for 101-161 movement type the system doesn't create any output type.
    Do you have some suggestions? What should I do..what else soul I check?
    Thanks.
    Message was edited by:
            Florina Cheta

    Have a look at any of the following notes:-
    1)  Note 171989 - Sales-order-related productn: Custmr exit COPCP002
    2)  Note 520000 - FAQ: Valuated special stocks
    3)  Note 557582 - User exit and valuated sales order stock
    4)  Note 580228 - Incorrect prices for materials procured externally
    5)  Note 983193 - Docu:Externally procurd material in valtd sales order stock
    thanks
    G. Lakshmipathi

  • Authorization Object Related To Movement Type

    Hi,
    I meet one problem, one user want to check which user can use MB1A t-code with movement type 201 and 202, but I know there are some authorization object related to movement type and I want to use suim with mb1a t-code and authorization object to check the user, but I don't know the authorization object about movement type in MB1A t-code, does anyone can help?

    Go to SU24, enter the transaction code and press execute.
    Here you can see the all authorization object whose are used for the transaction code MB1C.
    Regards
    Dev

  • Movement type to use without refering a PO and move to Unrestricted stock?

    Hi,
    Can i make a goods receipt with out referring a purchase order, if so what movement type should I use to move the goods to unrestricted stock so that i can use it in sales order. Can any one suggest me?
    Thanks
    Vijay

    Hi
    T-code MB1C
    Movement type  561
    Kapil

  • Error during search for WM movement type (911)

    Hi gurus,
    I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
    "Error during search for WM movement type (911)"
    any idea of this message?
    Thanks in advance

    The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
    Lakshman

  • During MI07 Post Differnce, can we control Movement Type authorisation?

    Dear all
    During the MI07 to post difference during physical inventory, users are asked to choose  the  Movement Type with Reason Code:
    (a) If it is a gain, use the reason code for movement type u2018701u2019.
    (b) If it is a loss, use the reason code for the movement type u2018702u2019.
    However, in the MVT reason code list, there are many many MVT Reason Codes available for users to choose.
    I have checked in PFCF for Tcode: Mi07, there is no authorisation to control MVT.
    How do we do that?
    Please advise as I do not want user to choose from the wrong MVT.
    Thanks for everyone in SDN!!
    Edited by: Daimos on Jul 22, 2009 3:42 AM

    Hello,
    Are you saying that you were able to restrict the pop up for reason codes to show only 701, 702 even thought you had other reason codes maintained for 101 etc ?
    If yes, can you please tell me how you achieved that. Im in a similar situation.
    Thanks

  • Movement type related question

    Hi,
    What is the difference between movement type 413 and 412 with special stock indicator E?
    An explanation with an example would help.

    Hi Christino
    Movement type 412 E is used for reserving for sales order from the unrestricted stocks in MMBE in t code MB1B
    Movement type 413 E is used for reserving from one  sales order
    to another sales order in t code MB1B
    Say stock is 50 in MMBE in unrestricted for material X
    Sales order no 12345 created for customer A for material X for 50 units and you want all these 50 stocks for this order 12345
    Use Movement type 412 E in MB1B  t code
    Another Sales order no 12346 created for customer B for  same material X for 50 units and you want all these 50 stocks for this order 12346 as for you customer B is most precious
    For this use MB1B t code Movement type 413 E to shift stocks or reservation from sales order 12345 to 12346 that is from customer A to customer B
    Create a material put stocks create 2 orders for different customers and test it in MB1B
    Sorry Christino if your qn is can i use 413 instead of 412 E then i think it is almost the same the exact difference can be given by only MM people
    I think you can do that
    Movement type 413 as per definition is transfer posting from storage location to a sales order almost has the same functionality of 412 E i did tested it
    The special stock indicator E  has a relation between the SD item category it is defined in VOV7 and the same is linked with postings in MM thro t codes MB1B or MB1C also
    So  on the face of it movement types 413 and 412 E looks the same but there must be a great difference some where
    Dear Friends
    The second qn is comparision between 412 E and 413 and send your suggestions for that
    Regards
    Raja
    Edited by: ramanathan raja on Feb 13, 2009 5:45 PM

  • Mov. type  313

    Hi,
    In what situation mov. type 313 will use, what the purpose ?? in t-code MB1B.
    Thanks.

    Hi Balaji, 
    The Tcode MB1B is mainly used to enter the stock transfer which can take place between
    One storage location to another storage location with in the same plant
    One plant to another plant
    One Company code to other Company code 
    The movement type 313 is mainly used when you are trying to do a two stage stock
    The movement type 313 removes the stock from the first storage location and in conjunction with this movement type yuo use Movemnt type 315 which in turn places the material in the receiving storage location
    When you use the movement type 313 the follwing changes occur
    1) Issuing storage location(Originating) unrestricted stock level is reduced
    2) Receiving storage location stock in transit level is increased
    3) Plant unrestricted stock level is reduced
    4) Plant unrestricted stock in transit stock level is increased
    Hope  this helps you out
    In case if you need more infromation do let me know
    IF found useful reward accordingly
    Thanks & Regards
    Pavan

  • Movement type 544 comes in excise reconcilation

    Hi,
    At the time of reconcilation in T code J1IFQ, movement type 544 comes into reconcilation, however movement type 544 in group 0001 with movement type 541.
    Regards,
    Dinesh

    Hi,
    In case if document is cancelled after reconcilation or you make the return delivery to vendor. At that time movement type 544 comes & you need to create the challan for 544 movement type.
    That case is ok, I am facing the problems in subsequent adjustment document where same material docuemnt having the under & Over consumption. 543 & 544 movement type both.
    same thing I am facing in physical inventory documents when 701 & 702 movements both occur.
    If single movement type in material document then no issue.
    Regards,
    Dinesh

Maybe you are looking for