Print connected through ethernet cable?

Can I print to a printer connected to airport extreme from PC connected to the airport extreme via an ethernet cable? Thanks

Never mind, I figured it out.

Similar Messages

I have an HP LaserJet 8150N that I am trying to get connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer.

I have an HP LaserJet 8150N that I use for my work and I have had this printer for ever and it is one heck of a work horse! I am trying to get it connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer. I have tried to reconfigure the printer using the JetDirect menu giving it a new IP address but still no luck. If anyone could help me through this issue I would appreciate it.

moonlightcaravan wrote:
Second, seeing "connecting" and connection failed is normal. You must click on "Connect As" in the Finder window and then enter the username and password for the admin account on the other computer. That should fix things.
Thanks for responding.
When does clicking on "Connect As" happen in the process above?
After step six? Seven?
After the connection has failed?
Is this the FInder window that shows the icon of the computer you want to copy the file from?
You should see "Connect As" in the Finder near the top right of the window as shown below:
!http://blog.brothersoft.com/wp-content/uploads/2008/11/howto_copy_files_to_or_from_your_iphone02.jpg!

Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

Hi, Alan -
How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
You can, but you'll need to expand your cabling a bit.
You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

I am unable to set up my new Time Capsule with my BT Home Hub - every time i connect the ethernet cable from Wan port to Home Hub, the internet signal drops

Hi there -
I've just purchased a new Time Capsule, and would like to set up a small home network with my Laptop, iMac and wireless printer. I'm following the first steps, but as soon as I connect an ethernet cable between the WAN port of the TC and the ethernet port of the HH, my BT internet connection drops out and I have to restart the HH. Upon which point it drops out again. The airport utility can see my TC, and gets as far as me typing in the new network name and setting up a password, but then it can't quite get through to the next stage. All the time it's just flashing amber.
Please help!

Setup the TC in bridge mode before you cannot it to the HH.
Simply do the setup fully in isolation. And do it by ethernet.
Setup wireless to create a wireless network.
You can use either same SSID =Wireless name as the HH .. same security same password.
Or use a different name and setup.. totally up to you.
Update the TC and then plug it into the HH by ethernet.

HP LaserJet P1505n, connected by Ethernet cable, does not get IP address so I can't get to web admin

Hello and thanks in advance,
I've read as many threads as possible and done everything I could to get my HP P1505n working again but can't and need some new advice.
I've had this printer for a couple of years and it worked well and always connected. I had it plugged into a router (at one point linksys, then a dlink) and had given it a static ip address that it always printed to.
Recently, I got a Cisco modem/router from my internet service provider, I plugged in the printer's ethernet cable to it, and suddenly I couldn't print to it anymore. I couldn't access it's webadmin console and couldn't change any settings. I went through various troubleshooting steps and ultimately did a hard reset.
I left it alone for a week (thankfully I have another printer) but am trying again to get it up and running. Right now it has switched to AutoIP but it doesn't get in IP address. It only shows 169.254.241.24. I even tried to connect directly to it via ethernet and change my computer's ip to 169.254.241.23 with the same subnet mask and it won't connect to it - I can't get to the webadmin to manually assign it an IP like 192.168.0.111
Right at this moment actually I cannot even get a configuration page to print and the amber light above the green ethernet light flashes on for a second or two and then off for a few seconds and that cycle continues.
What can I do to get this working again aside from plugging in a usb cable and forgetting about network printing (the reason I bought it in the first place)?
Thanks in advance

Hi gr---8 ,
Sorry to hear you are still having issues setting up the printer on the wired network.
We will need to find out if it is the Ethernet port on the printer, or the network causing this issue.
Do you have Mac filtering on the router?
Disconnect the Ethernet cable from the printer.
Restore the printer back to factory settings.
Print a hardware test page to test the printer's hardware. Make sure the SSID and IP address is cleared from your router's setttings. Printing a Configuration Page in Windows.
Connect the Ethernet cable directly to the computer.
Print the configuration page again to see if you get a IP address to test the Ethernet port on the printer.
What is the IP address?
Run the add printer wizard to install the printer.
Test the printer.
Were you able to see the printer, add the printer and print?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Please provide in detail the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Action initiated: Upgrade Mac Book Pro to Mountain Lion OS X 10.8.-, via Wi-fi. After 2 hours said could not install it. I tried again through Ethernet (cable). No success. Should I buy itagain? How this thing with the Apple store works? Not so familiar.

The OS X Mountain Lion I tried to download Wi-Fi on Mac Book Pro was not successfull. Should I buy it again? Should I check with Apple store for credit?
I successfully instaled it in iMac, but have problem with laptp. I also think I should not have bought 2 upgardes, becase if I have 2 computers, one paid upgrade is good for both computers. Am I wrong? SOmeone can advise how to proceed? I want to try again through Ethernet - cable internet - instead of Wi-Fi. Thank you

You should not have paid twice. If you logged into the App Store with the same AppleID as you used to purchase Mountain Lion the first time, you should not have been charged again.
If you internet connection is not working well enough to download it, do you have access to another network that might be faster? Perhaps and Apple Store nearby?

HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
or must the printer I want to use also have a wifi connection ?
I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW. We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

You must use an airprint printer directly connected to wifi through it's own wifi card.
See here for info:
http://support.apple.com/kb/ht4356

How to connect 2 ethernet cables to 1 port? Help me please.

My computer has one ethernet port, but I need to be able to connect two ethernet cables to it.
I am about to get satellite internet which requires an ethernet port and also about to sign up to a VoIP (Voice over IP) service which also requires an ethernet port.
Is there something I can buy or do to overcome this problem?
Sorry if this question seems obvious, but I really don't have a clue and would be very thankful for some good advice.
Cheers,
Crystal Venus.

Crystal,
You need an Ethernet Hub, or Router. This will allow you to "Split" the connection from your satellite internet to the VOIP phone box, and to your computer. These are readily available at any computer store, like Best Buy, CompUSA etc.
Your internet provider might even have some info for you on this front.

How can i airplay from my mac connected through ethernet to an aple tv 2 on wifi

Hi everyone..
im having troubles using Airplay on my mac.. i connect my mac to the internet and home network using an ethernet connection to my router (non apple branded router) .. my apple tv 2 is connected to my home wifi network from the same router.. when i first set up my apple tv.. i was able to see the Airplay icon on itunes and it would let me Airplay media from my mac to my apple tv.. however.. it disconnects after a little while.. same thing with viewing my itunes library from apple tv.. i was able to detect my shared library from the apple tv.. i was able to play some media but then it disconnected after some time.. but now.. the Airplay icon doesnt show up in itunes anymore.. and i cant see my shared library from my apple tv neither.. ive looked around for a solution and followed the tip to turn the ipv6 off.. it worked for some time but now the problem is back..
i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet..
Mac OS X Lion 10.7.4
Apple TV 2 software version 4.4.4
Thanks in advance

thisguy. wrote:
......i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet.........
I wouldn't say that was the obvious answer at all, my Mac is connected by ethernet and 6 of my 7 Apple TV's are connected by wifi, I haven't had any of your problems. The problem is most likely on your network.
Intermittent problems
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
Consistent Problems
A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
80
TCP
HTTP
AirPlay
443
TCP
HTTPS
AirPlay
554
TCP/UDP
RTSP
AirPlay
3689
TCP
DAAP
iTunes/AirPlay
5297
TCP
Bonjour
5289
TCP/UDP
Bonjour
5353
TCP/UDP
MDNS
Bonjour/AirPlay
49159
UDP
MDNS (Win)
Bonjour/AirPlay
49163
UDP
MDNS (Win)
Bonjour/AirPlay
Refer to your router manual/manufacturer for any settings that are specific to that model.
Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them.

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

Can you connect an ethernet cable to an Airport Express Extension?

I have an Airport Express that I am using as an extension to my current home wireless network.
That is successful and I have a green light. I am trying to plug in an ethernet cable to allow an older mac without an airport card to connect to that Airport Express Extension. When I turn off the airport and select Ethernet Cable, I am told that the cable is not connected to the internet. The wireless works fine and I can get full bars in the far part of my house - but I do not get internet when connecting an Ethernet cable.
Help!
Thanks in advance

See my reply to your other post.

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

m1doc,
Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country.

HT204291 airplay icon not showing up on windows laptop when appletv is connected through ethernet

itunes cannot detect apple tv when apple tv is connected through ethernet and the laptop is wireless, although both devices are in the same overall network.

Then I suspect your network or it's settings are your problem.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Print connected through ethernet cable?

Similar Messages

Maybe you are looking for