Print continuous pages in sap script

Hi all,
I am taking the start from and end form twice. The first page has next page and the page numbers are fine, as i am going with the new page I created the page numbers are restarted.
I've tried the option (jobpages and formpages which are giving the spool pages and current pages of the pages I created). I need to find the difference between the pages discussed above or need to use &SAPSCRIPT-COUNTER_x(+)& (need syntax of the same if it works).
can any one Please suggest the solution to get continuous pages even though new start form is called up.
Thanks and Regards
san

Hi,
When you use Scripts or Smartforms the page counter will be defined by the system with a new page.
we cannot manipulate the pagenumbers it is purely system dependant by which you start a page
If you want to get the page number as needed then :
Write your own logic
1. create a counter and get the count of teh pages irrespective of new or start page
2. declare the value in the form
Hope this helps.
Regards,
Amitteja

Similar Messages

How to print last page in sap script in ladscape format?

Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
Pravin

Hi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam

Printing LAST page in SAP script on the back side.

Hi ,
I have a problem with the printing of the LAST page on the reverse side of the form, when done with a vendor.
At a time we print many vendors together.
So, when done with printing of a vendor it needs to print his address on last page, reverse side(address)
Next will be followed by another vendor details.
I cannot give 'D' for the first page because it would fail if the form flows more than 2 pages.
is there any way of triggering the LAST page in SAP Script when it done with printing of one vendor.
any help would be highly appreciated.
regards.

Hi ,
In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
Presently script contains THREE pages ( FIRST, NEXT, TERMS).
FIRST with attributes :
next page as NEXT , Print mode T.
NEXT with attributes :
next page as NEXT and print mode T
TERMS with attributes :
next page as ' '.
I Created 'TERMS AND CONDITION' window.For TERMS page i selected 'TERMS AND CONDITION' window only.
So page window of 'TERMS' is 'TERMS AND CONDITION' and i included standard text in 'TERMS AND CONDITION' window.
If PO contains 9 pages( that means MAIN WINDOW data flows up to 9th page with footer also ).
So i have to print standard text(Terms and conditions) back side of 9th page only not on all pages.
So total PO contians 9 pages with 10 prints.
Please help to solve the issue
Thanks and Regards
Venkata swamy

How to print different pages of sap script from diff. trays of printer

Hi All,
I have the requirement in SAP script. How to print different pages from different trays in the printer.
For example page 1 logo and address has to print from tray-1,
page 2 main data print from tray-2,
page 3 footer data print from tray-3.
will appreciate if u come up with solutions asap.
Thanks in advance.

Hi,
May be the links given below might help you,
SAPScript:Selecting Different Tray in SAPscript
Print to different output tray in SAPscript/Print Workbench
Regards,
Hema.
Reward points if it is useful.

Print Second page in SAP script

Hi ,
I want to print second page in my sapscript.first page has Header,MAIN,footer windows. Second page has only one window where i need to print some terms and conditions those are hard coded in script.
Could you please let me know how i can print second page after first page?
Thanks
Mohit

Create a new page as second page....
Assign the second page as the next page to the first page... select print only when main window finishes...
It will automatically print the second page...

Urgent - Not able to Print back page for Last Page in SAP Script.

Hello All,
I need to Print back page in SAP Script, I am able to do it by setting print mode as D, but now the problem is, it does not print back page for last page.
For eg. if there are 3 pages it prints back page for first two. If there is only one page then it does not print back page.
Please Help.
Thanks.

hi,
Yes, we can print logo as water mark in scripts
Just do as like this....
Upload your logo via SE78.
- Select 'Import' button from application toolbar of SE78, and perform upload.
and write this code in scripts
BITMAP 'COMPANY_LOGO' OBJECT GRAPHICS ID BMAP TYPE BCOL
regards
Sankar

Printing page number and continu text in sap script

Hi
I have created sapscript to print PO and using standard print program with three pages.
My thrid page called with NEWPAGE <> from Main window of first or sencond page wokign fine but the page number is coming like page 1 of 2, 2 of 2 and 3 of 2
another issue: I want to print continue text if sapscript has more than one page, Not included last above newpage <page>
Please give me some idea how to go about above two
Regrads,
challa

Hello,
TO print the page number do like this
&Pages& of &SAPSCIPTS-FORMPAGES&
To print continues pages. Put the text in the MAIN Page.
and use PROTECT ..... ENDPROTECT
If useful reward.
Vasanth

Need to print some text only in last page in SAP script

Moved to correct forum by Moderator. General wasn't right either.
Hi All.
I need to print "Remarks" only in last page of sap script.
Can anyone please help me on this.
Thanks
Senthil kumar V.
Edited by: Matt on Nov 21, 2008 7:38 AM

Hi,
you have 4 possibilities.2 at non main window, 2 at main window.
at non main window.
1. /: IF &PAGE(C)& = &SAPSCRIPT-FORMPAGES(C)&
remarks
remarks
remarks
   /: ENDIF
2, /: if &NEXTPAGE& ='0'.
remarks
remarks
remarks
   /: ENDIF
at main window
3. Add the remarks at the last item of the main which is printed
4. add a new item to your main (/E)
    put your remarks in it.
   Change your program in such a way this item will print as last one.
   like
    /E REMARKS
remarks
remarks
remarks
   and in sapscript program add logic at the end.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REMARKS'
EXCEPTIONS
element = 1
window = 2.
I am sure this will do. Make a choice.
Gr., Frank

How can I create more than one main window in a page of SAP SCRIPT?

How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
Regards,
Subhasish

Hi Ganguly,
It is possible to have more than one main window in a same page.
You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
you want print the main window data twice? or you want to create two main window in the same page ?
1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
2. create two page with the same script form.
3. you can write the coding inside the program to print twice the same page.
Hope this information use full to you..

How to Avoid blank page in SAP Script

I am working on a Script. My Script prints a check.
This script is a copy of a std script.
It has 3 pages - First Next Last
My First page has all the required data.
My second page is empty with out any values.
I am getting the blank page as Page 2 when executing. How can we avoid it ?
Senthil

Hi Senthil,
Please see the below points:
1. Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
2. Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page
Please see the link which is similar to your problem:
Re: How to remove blank page in sap script
May it helps you.
Regards.
Deepak Sharma.

How to change a Code Page in SAP SCRIPT ?

I have a specific requirement, would need your help :
There is a CODE PAGE which is getting assigned to the SAP SCRIPT FORM. For E.g : 1100 is generally used for SAP SCRIPTS.
I would like to know if there is a possibility to change the Code Page based on certain conditions ??
Also i would like to know how and where is a CODE PAGE and SAP SCRIPT FORM linked.
I have analysed that a default code page can be set in the SAP LOG ON PAD but not able to find the issues mentioned above.
Kindly help me out with your valuable suggestions and solutions.
Thankyou
Brijesh.

Hi,
MDMP means Multi Display Multi Processing. See the note system for details. The problem of MDMP is that the different languages use different codepages and not all characteres can be displayed in every codepage.
A solution would be a unicode conversion of the system. In unicode there is only one internal codepage, which contains all special characters of the individual languages. However the migration needs several hours of down time and unicode systems need more memory and disk space. I can't tell you a percentage for that. You need at least R/3 4.7 for unicode.
In non-unicode system I believe you can't change the codepage inside a SAPscript document directly. I would have to end form processing an start a new form. To change the language you can try the ABAP-command SET LOCALE. Also see the language parameter in START_FORM.
If that doesn't work I would try using RFC-Connections. Make RFC-Connections in your system which contain the system it self as target system, but with the desired language filled in. You do not need to provide a user or password, that would be taken form the logged on user.
Inside your printing program you put the real printing into a function module. Your report then can call the function via RFC using a connection in the correct logon language.
Greetings

How To trigger last page in sap script of customer account statement

Hello all,
I am working on customer account statement.
It has it's own standard script(F140_CUS_STAT_02). But my client's requirement was completly diffrent,so i copied that to z script and made some changes like delete some window and some another window.
Now on first page , i have following windows,
1) Header
2) address
3) main
4) Account
5) Footer.
Next Page having following windows,
1) Header
2) Main
3) account
4) footer
Now i want to print account window on lsat page, so i put the condition nextpage = 0.
and it is working fine , but as account window is physically present after Main window , so that much blak sapge is getting creted after main window on every page.
To remove that blank space i am thinking of creting one more page and everytime i want display account window on that page.
I have creted the last page also. but in my output it not detecting that last page.
For First page - next page is next.
For Next page - next page is next.
for Last page- next page is last.
Also i have added following code at last in main window.
/: NEXT-PAGE LAST.
But i think i am placing this code at incorrect position in main window.
I am not able to find out the correct podition to put the above code,but main window of that script conataing so namy text element, and that text element are getting handled from driver program based on some conditions.
I have added my code in main window but not changed the original code.
Plz let me know where to write /: NEXT-PAGE LAST. in main window.
Or provide me some another solution to trigger thet last page in sap script.
Regards,
Anuja Dhondge

Hi ,
actually in account window i have used tha box command to print account statement.
Previously i was printing this account statement in main window itself but without using bottom and end bottom command.
So , as i made some changes or add some code in main window then lines of this account statement were getting dismental.
So my question is using bottom and end-bottom command this will happen or not????

Last page in SAP Script

Hi All,
I have a requirement of printing terms and conditions of PO on a new page of SAP Script.
I created a new page as LAST and called it through NEW-PAGE command from MAIN window.
On my LAST page I created 1 window, which calls Standard Text.
Issue I am facing is in spite of having data of more than 1 pages , print preview is displaying only 1 page of Terms and Condtions.
Can you please let me know what am I missing?

Hi Shradda,
you also can just add an additional processing.
You know, something like
/: PERFORM 'YOUR_ROUTINE' IN PROGRAM 'YOUR_PROG'
/: ENDFORM
See here: https://help.sap.com/saphelp_crm700_ehp02/helpdata/en/4e/34f87463de02c2e10000000a15822b/content.htm?frameset=/de/4e/3663…
But in my opinion it is the best to make a copy of the original because I'm pretty sure, there will be more additional requierements in the end and just to enhance or to use this technique is very hard to understand after the second implemented spot
Can you share your stuff how you tried it?
I mean, calling two sites in a row should definitv work fine.
/: NEW-PAGE 'LAST1'
/: NEW-PAGE 'LAST2'
I tried it on my own and it works perfectly fine...
Did you gave your last-page a followpage while testing the first suggestion? That is of course a must-have.
~Florian

Creation of New Page in SAP Script

Hi Experts,
Please advice when will a new page trigger in SAP Script :
As per my requirement I need to create a new page for an existing layout and make changes to the second page alone...
but this page should be triggered only for a specific condition. Is it possible to trigger second page when it satisfies certain conditon?
I have searched SDN regarding the same but most of them have recommended to use NEW-PAGE...but as per my understanding NEW-PAGE is used when certain data needs to be printed on the next page ( not on the new page ).
Thanks
Karthik.R

Ok friend,
Try using the conditions in your driver program using 'CONTROL_FORM' function module. or using some other condition in it.
You can also give conditions in text editors and you can trigger the pages.
i think these links will help you in solving your solution just check these Link: [new page based on condition in sap script|new page based on condition in sap script; this is just an hint from this you can develop the idea.
Link: [Breaks in Smartforms|LAST PAGE FOR SAP SCRIPT;.
Also there are other few related links in SDN which will help you.
I think this must solve your issue if you still face any queries please revert back to me i will help you.
Thanks,
Sri Hari

Header in every page of SAP-Script

Hi all,
How to print header in every page of SAP-Script?
Thanks in advance,
SG

Hi,
While giving the WRITE FOR, u have to give the Value HEADER for TYPE.
U have it to give it inside the Loop so that u ll get the header in all pages.
For eg.,
Loop at <itab>.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 element = 'ELEMENT1'
 type = 'HEADER'
 window = 'WINDOW1'.
endloop.
Regards,
Padmam.

Print continuous pages in sap script

Similar Messages

Maybe you are looking for