PRINT COPY IS CROOKED WHEN IT EXITS FROM PRINTER

when i try to print small labels on Avery sheets 8 1/2 x 11, the copy comes out crooked from the 4500-10g.

Hi there yarg,
This article should help you straighten those prints out. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Firefox hand every time when laptop exit from sleep mode. Tested on 5 laptops with windows 7.

Firefox hand every time when laptop exit from sleep mode. Tested on 5 laptops with windows 7.

Same exactly problem here, very annoying when the computer goes to sleep mode and then Firefox locks up.

Store data when user exits from web application

is there anyway to call a method when user closes browser and session finish
thank you

I usually just use a HttpSessionListener.
What's the difference?Lots ......
This is from javadoc
public interface HttpSessionListener
Implementations of this interface are notified of changes to the list of active sessions in a web application.
The implementation class would be invoked and in its methods, could process any action on session creation/termination
public interface HttpSessionBindingListener
Causes an object to be notified when it is bound to or unbound from a session. The object is notified by an HttpSessionBindingEvent object. This may be as a result of a servlet programmer explicitly unbinding an attribute from a session, due to a session being invalidated, or due to a session timing out.
The implementation class would usually be a bean. The bean thus has control to take any action it deems fit when its bound to a session or when its unbound from the session.
Depending on the requirements, you could implement either of the two interfaces.
Thanks,
Ram.

My Whole appication gets closed when i exit from Document Window

I have a MDI Application.
I have several document windows opened inside that document window.
Now in one document window i goes in enter query mode. Queries a record. Now when i closes that document my whole application gets closed. In contrary, If i am creating a new record in that window, saves that record or say do not save but quit the document window then my only that document window gets closed. Not the whole application..
Can u Please Help

You have to sign into this discussion site with your Apple ID in order to participate. Do you sign in when you are trying to view your responses?
You should still be able ro read the response, even if not signed in, but you can't respond if not signed in.
Are you trying to do this with your iPad connected to your PC by any chance? Do I even understand your question correctly?

Acrobat 9.2 crash after exit from Acrobat

I have a plugin for Acrobat 8.0 and re-compiled for Acrobat 9.0 using the 9.0 SDK. It works fine except when I exit from Acrobat, Acrobat always crash in any of the Acrobat Pro 9.x versions. The crash log always show the same place. It does not matter if I disable or enable the update. Always the same place to crash. Does anyone have any ideas?
Process:         AdobeAcrobat [29144]
Path:            /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
Identifier:      com.adobe.Acrobat.Pro
Version:         9.2.0 (9.2.0)
Code Type:       X86 (Native)
Parent Process: launchd [119]
Interval Since Last Report:          668 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report:   1
Date/Time:       2009-10-14 15:10:00.939 -0400
OS Version:      Mac OS X 10.5.8 (9L30)
Report Version: 6
Anonymous UUID: F9997425-181F-4A46-8222-B1BAA9558760
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000015fffcc1
Crashed Thread: 18
Thread 0:
0   dyld                              0x8fe1764c ImageLoaderMachO::doBindLazySymbol(unsigned long*, ImageLoader::LinkContext const&) + 300
1   dyld                              0x8fe06ed5 dyld::bindLazySymbol(mach_header const*, unsigned long*) + 149
2   dyld                              0x8fe18c2f stub_binding_helper_interface2 + 21
3   ...adobe.acrobat.amtlibwrapper    0x188c42e2 0x1883b000 + 561890
4   ...adobe.acrobat.amtlibwrapper    0x188c4343 0x1883b000 + 561987
5   ...adobe.acrobat.amtlibwrapper    0x18851355 AVAMTForegroundUpdateCheckEnabled + 84063
6   ...adobe.acrobat.amtlibwrapper    0x18843989 AVAMTForegroundUpdateCheckEnabled + 28307
7   ...adobe.acrobat.amtlibwrapper    0x1883cc26 AVAMTForegroundUpdateCheckEnabled + 304
8   com.adobe.Acrobat.framework       0x803d4a07 AcroSecurityBailOutImpl + 2997119
9   com.adobe.Acrobat.framework       0x803d4a79 AcroSecurityBailOutImpl + 2997233
10 com.adobe.Acrobat.framework       0x800ffc97 AcroSecurityBailOutImpl + 28175
11 com.adobe.Acrobat.framework       0x8038cb91 AcroSecurityBailOutImpl + 2702601
12 com.adobe.Acrobat.framework       0x8007ff72 AcroBundleThreadQuitProc + 3096
13 com.adobe.Acrobat.framework       0x7fe43320 RunAcrobat + 326
14 com.adobe.Acrobat.Pro             0x00002e8b start + 2371
15 com.adobe.Acrobat.Pro             0x0000264a start + 258
16 com.adobe.Acrobat.Pro             0x00002571 start + 41

iPhoto is missing bits of itself. You need to reinstall it.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

If I exit from Firefox "Save Tabs" did not appear.WindosXP.Firefox 3.5.7

For better using I uninstall Firefox 3.5 and install Firefox 4.0.1. It often crush and I uninstall Firefox 4.0.1 and install Firefox 3.5.7. Now when I exit from Firefox, window "Save Tabs" do not appear. It is unpleasant for me.
Thank you.

Just for clarification, the about:config browser.showQuitWarning true no longer brings up a dialog ever, which it used to do in closing an individual window, as well as closing the Firefox Application.

Received a message after exiting from an online game.

this is my first time using my T400 to play an online game..however when i exited from the game..my desktop popped out a message..it says my resolution is not optimal..optimal resolution should be 1440 X 900..but my resolution was that..so what's the problem? i seem to always get that message when i exited from the game..any help would be appreciated..Thanks

Call them again and tell them you want a Refund. Send it back then Order another or something else.
EDIT:
Apple has a 14 day No Questions Ask Return Policy for full refund. Take advantage of it and return that system.

My N82 won't exit from copy & paste

My N82 won't exit from copy & paste mode i cant type anything and I have to close app and reopen it again

Hi hostmark
When you open "Messaging" again does it work normally until you try to "Copy" to the clipboard again?
Happy to have helped forum in a small way with a Support Ratio = 37.0

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?
Thanks

I tried Notpod but can't get it to work. Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+). I also can't do this in Windows Explorer. Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
The error mesag I get in Notpod is:
"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit the application will close immediately.
InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
Thanks anyone who can help

Automatically exit from fullscreen mode when silveright player section or any buttom from control strip click in fullscreen mode.

I have implement an full screen functionality using javascript fullscript api to show page contain in full screen mode and that page have three type of content
a.)smf player xap
b.)dfp ads
c.)social media plugin
that full screen functionality is work perfectly in chrome browser but when I use the mozila browser it create problem during fullscreen mode when any user click on any area of smf player.
For example if i click on fulls screen button that page easily open in full screen mode but if user click on any part contain by the xap contain it automatically exit from full screen mode like if any user click on play button during full scree mode it automatically exit from full screen.

In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]]

X crash the PC when exit from X (dixGetPrivateAddr: Assertion)

I installed Arch Linux on my new PC (had Arch on my 6 year old notebook for about 2 years) but each time I want to exit form X (KDE or TWN) crash the video output. The display switch to standby and the keyboard doesn't work any more, so I can't switch to a terminal.
My PC config:
Arch x86_64, new net installation up-to-date (pacman -Syu)
AMD X6, Radeon HD5830, dual head installation
I tried some AUR radeon-git driver (a lot of artefacts, exit from X works) , catalyst (closed source , radeon r300g on my notebook just rocks ). After all this installation of different drivers I set a new Arch Linux installation up (no KDE, only TWN). But the problem remains. With a remote ssh login I can access the crashed PC and shut it down or restart X and X starts again (now I can switch to a terminal until I exit again from X).
Terminal output when I start X over ssh:
abc@xsix ~]$ su root
Passwort:
[root@xsix abc]# startx
X.Org X Server 1.9.2
Release Date: 2010-10-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.35-ARCH x86_64
Current Operating System: Linux xsix 2.6.36-ARCH #1 SMP PREEMPT Sat Jan 8 14:15:27 CET 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/ed0f04ab-b16c-4a11-8c1b-175c25f7ddb1 ro
Build Date: 01 November 2010 10:29:19PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 15 00:24:48 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 4 (Unterbrechung während des Betriebssystemaufrufs) on X server ":0"
after 1027 requests (1027 known processed) with 2 events remaining.
X: ../../../include/privates.h:122: dixGetPrivateAddr: Assertion `key->initialized' failed.
[root@xsix abc]#
Xorg log:
http://archlinux.pastebin.com/MaBAbWJL
no EE errors
Xorg config:
[root@xsix log]# cat /etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "HD5830"
Driver "radeon"
EndSection
[root@xsix log]#
radeon is in /etc/rc.conf under MODULES and dbus is in DAEMONS, late KMS enabled.
Has someone an idea to solve this problem or has/had a similar problems with X,radeon,...? Any piece of information is welcome.
Last edited by devnow (2011-01-15 00:03:40)

After add Repo from https://bbs.archlinux.org/viewtopic.php?id=79509 and install
- dri2proto-git
- glproto-git
- libdrm-git
- mesa-full (replaces mesa, libgl and ati-dri)
- mesa-demos-git (optional: needed for glxinfo and glxgears)
- mesa-full-gallium (optional)
- xf86-video-ati-git
with Kernel 2.6.37 from testing (kernel26-drm-radeon-testing and linux-firmware-git not installed)
X don't crash any more
But exit from X isn't clean compare last few lines:
[root@xsix abc]# startx
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.36-ARCH x86_64
Current Operating System: Linux xsix 2.6.37-ARCH #1 SMP PREEMPT Fri Jan 7 17:32:33 CET 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/ed0f04ab-b16c-4a11-8c1b-175c25f7ddb1 ro
Build Date: 08 January 2011 11:24:47PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 15 16:56:08 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 4 (Unterbrechung während des Betriebssystemaufrufs) on X server ":0"
after 1354 requests (1354 known processed) with 2 events remaining.
Now I will install KDE again and hope there are no wired artefacts with this driver.
Btw, is it possible to move this topic to Desktop Environments?

Exiting from OSB pipeline when application error occurs

Hi
My proxy exposes 3 operations to the consumers though WSDL with different inputs and similar output formats. For all these 3 operations there is a common service to be called before actually get into the operational branch that i created for handling these operations. so the message flow would be like below:
pipelinepair1 -> stage1 in pipeline1 ->service callout -> opeartional branch.
I am manipulating the response n respone line of pipeline1 for all the operations as its similar strcuture. If an application error arises in service callout the error will be in the body. so if the error raise i should directly exit from message flow in service callout itself wthout proceeding to operational branch. So i tried with reply action, though i am existing from OSB its not going into response pipeline of pipelinepair1. How can i handle this scenario? i don't want to put the same thing in service callout response pipeline again. Please let me know your insights.
Thanks
Siva

This could be done in different ways... why you need to manipulate the response in response pipeline only.
When your service call out fails do a 'Raise error' action.. and process the reply in stage error handler which will complete with a "reply with failue ( or success) action. if you have not configured an stage error handler, you need to do this in the service error handler.
As this is an error case it is apt you handle this at the error pipeline( stage or service error handler) rather than the response pipeline.

PSE 9 (Win7) Organizer won't "copy" when adding images from network

First, bringing images into PSE 9 Organizer works as expected from cameras, memory cards, etc. The file is copied from the original source onto the drive with the catalog.
But, I simply cannot get a file "copied" from its original location when bringing it into the PSE 9 catalog under Windows 7 (64-bit) if the source location is on another computer "seen" via Windows Homegroup network.
I do the following from the Organizer:
1) File-Get Photos and Videos-From Files and Folders
2) I browse to the Homegroup folder that has the file, and highlight it. (By the way, it takes several attempts of moving the mouse over the file name before the preview appears and the file is actually selected.)
3) At this point I would expect the "Copy Files on Import" option to be available, but it is greyed-out and not checkable.
4) If I select Open or Get Media, the file does go into the Organizer, but the file location is still the Homegroup network drive. As soon as the source computer is off-line, the Organizer link is lost, and I can't use the file.
Why is the "Copy Files on Import" option never available??
Here's what it looks like:

What I am trying to do is to use Organizer to centralize, on one hard drive, images from various other computers in my Windows 7 Homegroup that may or may not be on when I need the images. A thumbnail in the Organizer that points to an offline source is not terribly useful.
My problem could be fixed, as well as the overall usefulness of Organizer improved, by the simple enabling of the copy option even when another harddrive or network drive is the source. In this way, both the "always-on" and "never-on" situations could be accommodated.
My solution was to copy the files in question to an SD card, walk the card over to my main computer, and then bring them into the catalog (which actually copies the files to the hard drive, which was my objective in the first place).

When I download from my samsung camera, the photos do not go to the "photos" file. I have to download to "import" then copy them to a separate album. what am I doing wrong?are

when I download from my samsung camera, the photos do not go to the "photos" file. I have to download to "import" then copy them to a separate album. what am I doing wrong?are

Is iPhoto open when you connect the camera and are you seeing the camera in iPhoto?
If not then describe in detail how you're going about trying to import photos from your Samsung camer into your iPhoto Library. From what you've described we have no idea what's going on.
And where is this "import" folder located that you're referring to?
OT

When I use Thunderbird with Yahoo Groups, Google groups, and other email lists, I don't get a copy of my own emails back from the list (I do with Mail.app)...?

When I use Thunderbird with Yahoo Groups, Google groups, and other email lists, I don't get a copy of my own emails back from the list. I *do* when I use Mail, so it seems like a Thunderbird thing. I'd really like to see my own emails come back to me in the conversation so that I know where my remarks fall in the discussion; it's very disorienting when you can't tell if your email has arrived at the list, or not. I can't seem to find the setting, and I've searched thru your help topics, etc., to no avail. Thanks.

It's both gmail and mac.com email accounts, and it's all email lists -- including some privately hosted on servers, that are not Google groups, not Yahoo groups.
I'm not sure what you mean by "saving a copy of your messages yourself" in Mail -- if I email to the lists with Mail on my laptop or iPad, I can see it on my desktop computer too, right in line with other email messages in the thread, after the list resends the message I've submitted. It's only Thunderbird that this "invisible posts" behavior happens, and it didn't use to happen this way. I used to get my emails posting right in the thread.

PRINT COPY IS CROOKED WHEN IT EXITS FROM PRINTER

Similar Messages

Maybe you are looking for