Print Correspondence in F.61 versus send email.
When I use f.61 for certain documents, it triggers an email instead of a printout. Where is the configuration or setup that controls whether or not a correspondence is printed or emailed?
Hi,
Could you kindly tell me where will we assign this functional module?
Thanks,
Sravan
Similar Messages
-
How do i set up the eprint from my blackberry so i can send emails to my printer and print them off
how do i set up eprint on my blackberry so i can send emails from my phone to the printer and print off
Hi Tanya_Carroll,
You can follow this link to set up ePrint.
http://h71028.www7.hp.com/hho/us/en/ep/articles/setting-up-mobile-printing.html
Once ePrint is setup, you can send an email to the printer's email address.
Be sure to use one of these email clients when sending to the printer. If the Blackberry will not send using your original email address, setup a new email account on the Blackberry and try again.
Hotmail, Yahoo! Mail, Gmail
BlackBerry mail clien
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided. -
Can I send email from my NOOK tablet to my HP photosmart printer?
Can I send emails to my HP photosmart printer? I have tried and I get the noreplt messages as if it has gone to the printer both I get nothing from the printer.
Hi, if you have created an ePrintCenter account and added your printer to that account you can check its ePrint job history. At least that will give you more visibility to the status of any jobs you send to your printer via the ePrint service. Receiving the "no reply" confirmation message only indicates that the email you sent was received by the ePrint service and is being prepared for printing.
Here's a link with more information you might find useful ePrint Service Help
Hope this helps solve your problem
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
To send email to print on printer, what is extension on email for printer @ what?
to send email to print on printer, what is extension on email for printer @ what?
Hi,
The ePrint extention you should use is @hpeprint.com
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Popup won't come up to print or send email
When I click on the print link in Mapquest or any website that has a popup like send email, the popup will not come up.
How can I fix this?Try a reset by pressing and holding the home and power buttons until the white Apple logo appears.
ReneeMouilso wrote:
My second issue popped up just a few days ago. I am unable to send a picture to anyone via email (gmail). I checked to make sure MMS is enabled (it is) and I certainly have MMS provided through Verizon.
MMS has absolutely nothing to do with email.
Is this the only email account on the device? If not, are you able to email pictures via other accounts?
Are you able to send emails with pictures attached from the gmail account on a computer? -
Sender email address for Customer Account Statement
Dear Experts,
Here's an issue that my colleague and I are currently facing:-
The Customer Account Statements that are sent via email in the transaction F.27 show that the sender email address is not equals the Accounting Clerk (KNB1-BUSAB) maintained in customer master data (FD03). Instead, the sender email address here is the email address of the person executing the transaction F.27.
I've looked through some programs (RFKORK00 and RFKORD10), and the variant used (SAPMA). Unfortunately, we still could not determine the root cause for this issue. What should we be looking into, and how can we resolve this issue too?
Any inputs would be much appreciated. Thanks.
Regards,
DeborahHi Ajay,
Thanks for your input. Really appreciate it. Would you please enlighten me further?
"The accounting clerk’s name is then printed in any correspondence with the customers or vendors."
The statement above leads me to think that consequently, the accounting clerk's email address should be the sender email address for the mail that is sent to the customer.
Also, when I hit the 'F1' key on the Accounting Clerk (in transactions F.27 or FD03), the following texts are shown:-
"Accounting clerk
Identification code for the accounting clerk.
The name of the accounting clerk defined by this identification code can be used in the payment program for correspondence and reporting (for example, open item lists)."
Again, this leads me to think that the sender email address should be the accounting clerk's email.
P/S:
The customer is saying that this should not happen, so my colleague and I are just investigating this issue further.
Regards,
Deborah -
Any new suggestions on how to send emails with godaddy account on iphone?
Godaddy email is my only email account that I cannot send emails from on my iphone. Have called everyone and read everything many times about what seems to be a common issue but verizon, godaddy and apple all have same answers, no answers or act surprised.
Tried every combination and suggestion like everyone else to no avail.
Godaddy immediately refers you to their app which works ok but it's another step and separate. Seems like they're blocking outbound to get people to use their app which is cluttered with their other usual money spending choices.
Otherwise I can't believe they're not aware of this and have no fix.
If anyone has suggestion that hasn't been mentioned 100 times online please let me know.
Thanks,
FrustratedYou don't have to pass the file name in the exec() in the script. Only the directory path for vbs execution in the VB Script. What you can do is check for the presence of the filename in the required directory using file_exists() function.
Create three Global Variable ($GV_FILENAME, $GV_PATH, $GV_FILE) and pass the file name and path to these variables.
$GV_PATH = 'C:\Temp';
$GV_FILENAME = '37957.pdf';
$GV_FILE ='"||$GV_PATH||'\\'||$GV_FILENAME||"';
Then write a ifelse condition in the script like below -
if(file_exists($GV_FILE) !=0)
Begin
exec('cscript','c:\\mymailscript\\MailDispatch.vbs,0);
print('file found executing vbscript');
else
raise_exception ('file not found');
end
Hope this helps.
Arun -
Send email from j2me through servlet
Hi people,
i hope you can help me because i am new in network programming.
I am trying to send email from j2me to googlemail account I have 2 classes EmailMidlet (which has been tested with wireless Toolkit 2.5.2 and it works) and the second class is the servlet-class named EmailServlet:
when i call the EmailServlet, i get on the console:
Server: 220 mx.google.com ESMTP g28sm19313024fkg.21
Server: 250 mx.google.com at your service
this is the code of my EmailServlet
import java.io.*;
import java.net.Socket;
import java.net.UnknownHostException;
import java.text.*;
import java.util.Date;
import javax.servlet.*;
import javax.servlet.http.*;
public class EmailServlet extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws IOException, ServletException {
System.out.println("____emailservlet.doPost");
response.setContentType("text/plain");
PrintWriter out = response.getWriter();
System.out.println("______________________________");
out.println();
String to = request.getParameter("to");
System.out.println("____________________________to" + to);
String subject = request.getParameter("subject");
String msg = request.getParameter("msg");
// construct an instance of EmailSender
System.out.println("servlet_to" + to);
send("[email protected]", to, subject, msg);
out.println("mail sent....");
public void send(String from, String to, String subject, String msg) {
Socket smtpSocket = null;
DataOutputStream os = null;
DataInputStream is = null;
try {
smtpSocket = new Socket("smtp.googlemail.com", 25);
os = new DataOutputStream(smtpSocket.getOutputStream());
is = new DataInputStream(smtpSocket.getInputStream());
} catch (UnknownHostException e) {
System.err.println("Don't know about host: hostname");
} catch (IOException e) {
System.err
.println("Couldn't get I/O for the connection to: hostname");
if (smtpSocket != null && os != null && is != null) {
try {
os.writeBytes("HELO there" + "\r\n");
os.writeBytes("MAIL FROM: " + from + "\r\n");
os.writeBytes("RCPT TO: " + to + "\r\n");
os.writeBytes("DATA\r\n");
os.writeBytes("Date: " + new Date() + "\r\n"); // stamp the msg
// with date
os.writeBytes("From: " + from + "\r\n");
os.writeBytes("To: " + to + "\r\n");
os.writeBytes("Subject: " + subject + "\r\n");
os.writeBytes(msg + "\r\n"); // message body
os.writeBytes(".\r\n");
os.writeBytes("QUIT\r\n");
// debugging
String responseLine;
while ((responseLine = is.readLine()) != null) {
System.out.println("Server: " + responseLine);
if (responseLine.indexOf("delivery") != -1) {
break;
os.close();
is.close();
smtpSocket.close();
} catch (UnknownHostException e) {
System.err.println("Trying to connect to unknown host: " + e);
} catch (IOException e) {
System.err.println("IOException: " + e);
} 1.when i print "to" in EmailServlet also:
String to = request.getParameter("to");
System.out.println("____________________________to" + to); it show null on the console :confused:
2. ist this right in case of googlemail.com?
smtpSocket = new Socket("smtp.googlemail.com", 25); I would be very grateful if somebody can help me.jackofall
Please don't post in old threads that are long dead. When you have a question, please start a topic of your own. Feel free to provide a link to an old thread if relevant.
I'm locking this thread now.
db -
Thunderbird will not send emails...but claims they are "sent" (no error message)
Up until the beginning of this month my Thunderbird was working fine with my roadrunner email address. I have not downloaded any new software or made any changes to my settings during this time. Now I can no longer send emails (although it claims they are sent) and I never get an error message. I'm definitely in online mode, can receive all messages fine, and can send messages from my road runner server fine through webmail. I have checked to ensure no firewalls or antiviruses are blocking my outgoing messages and know the SMTP is correct. Please help!
Hi...thanks so much for your help! It says "mail sent successfully" and shows it in my sent folder after I click send.
Troubleshooting:
Application Basics
Name: Thunderbird
Version: 24.4.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
Profile Folder: Show Folder
(Local drive)
Application Build ID: 20140316131045
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Crash Reports: about:crashes
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, , (pop3) pop-server.tampabay.rr.com:110, plain, passwordCleartext
OUTGOING: smtp-server.tampabay.rr.com:25, plain, none, true
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
Extensions
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.4.0
font.internaluseonly.changed: true
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
mail.openMessageBehavior.version: 1
mail.winsearch.enable: true
mail.winsearch.firstRunDone: true
mail.winsearch.global_reindex_time: 1386018562
mailnews.database.global.datastore.id: d0565083-6917-4a0a-868f-37bebde1e81
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1398260550
places.history.expiration.transient_current_max_pages: 104808
plugin.importedState: true
plugin.state.npdeployjava: 0
print.printer_Lexmark_X264dn.print_bgcolor: false
print.printer_Lexmark_X264dn.print_bgimages: false
print.printer_Lexmark_X264dn.print_colorspace:
print.printer_Lexmark_X264dn.print_command:
print.printer_Lexmark_X264dn.print_downloadfonts: false
print.printer_Lexmark_X264dn.print_duplex: -1574483314
print.printer_Lexmark_X264dn.print_edge_bottom: 0
print.printer_Lexmark_X264dn.print_edge_left: 0
print.printer_Lexmark_X264dn.print_edge_right: 0
print.printer_Lexmark_X264dn.print_edge_top: 0
print.printer_Lexmark_X264dn.print_evenpages: true
print.printer_Lexmark_X264dn.print_footercenter:
print.printer_Lexmark_X264dn.print_footerleft: &PT
print.printer_Lexmark_X264dn.print_footerright: &D
print.printer_Lexmark_X264dn.print_headercenter:
print.printer_Lexmark_X264dn.print_headerleft: &T
print.printer_Lexmark_X264dn.print_headerright: &U
print.printer_Lexmark_X264dn.print_in_color: true
print.printer_Lexmark_X264dn.print_margin_bottom: 0.5
print.printer_Lexmark_X264dn.print_margin_left: 0.5
print.printer_Lexmark_X264dn.print_margin_right: 0.5
print.printer_Lexmark_X264dn.print_margin_top: 0.5
print.printer_Lexmark_X264dn.print_oddpages: true
print.printer_Lexmark_X264dn.print_orientation: 0
print.printer_Lexmark_X264dn.print_page_delay: 50
print.printer_Lexmark_X264dn.print_paper_data: 1
print.printer_Lexmark_X264dn.print_paper_height: 11.00
print.printer_Lexmark_X264dn.print_paper_name:
print.printer_Lexmark_X264dn.print_paper_size_type: 0
print.printer_Lexmark_X264dn.print_paper_size_unit: 0
print.printer_Lexmark_X264dn.print_paper_width: 8.50
print.printer_Lexmark_X264dn.print_plex_name:
print.printer_Lexmark_X264dn.print_resolution: 0
print.printer_Lexmark_X264dn.print_resolution_name:
print.printer_Lexmark_X264dn.print_reversed: false
print.printer_Lexmark_X264dn.print_scaling: 1.00
print.printer_Lexmark_X264dn.print_shrink_to_fit: true
print.printer_Lexmark_X264dn.print_to_file: false
print.printer_Lexmark_X264dn.print_unwriteable_margin_bottom: 0
print.printer_Lexmark_X264dn.print_unwriteable_margin_left: 0
print.printer_Lexmark_X264dn.print_unwriteable_margin_right: 0
print.printer_Lexmark_X264dn.print_unwriteable_margin_top: 0
Graphics
Adapter Description: Intel(R) HD Graphics
Vendor ID: 0x8086
Device ID: 0x0152
Adapter RAM: Unknown
Adapter Drivers: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Driver Version: 8.15.10.2639
Driver Date: 2-1-2012
Direct2D Enabled: false
DirectWrite Enabled: false (6.2.9200.16571)
ClearType Parameters: ClearType parameters not found
WebGL Renderer: false
GPU Accelerated Windows: 0
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECC -
How can I send email from my HPEPrint email address
How can I send email from my HPEPrint email address, to other addresses? Is the HP photosmart 5010 smtp compatible?
Hello
The eprint service is only used for incoming emails to the eprint center which then go to your printer, you cannot send out emails from that address.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping! -
For years I have been using [email protected] for business.
It is on my business cards, stationary and most of my closest correspondences are maintained off of that email.
The documentation I've read indicates aliases should be transferred over as part of this iCloud migration but this does not seem to be the case. My account now shows 3of3 aliases available but I'm still able to receive messages addressed to the alias. I can no longer send emails from this alias.
How do I get this corrected?
Ali,
[email protected]
A.K.A
[email protected]Workable solution found here:
https://discussions.apple.com/thread/1589996?start=15&tstart=0 -
Error while sending email to external mail - Urgent
Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
S_MESTYP FOR EDIDC-MESTYP,
S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
P_DELSPL AS CHECKBOX,
P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
SNDPRN LIKE EDIDC-SNDPRN,
LOC LIKE ADRC-BUILDING,
DOCNUM LIKE EDIDC-DOCNUM,
IDOCTP LIKE EDIDC-IDOCTP,
MESTYP LIKE EDIDC-MESTYP,
DIRECT LIKE EDIDC-DIRECT,
CREDAT LIKE EDIDC-CREDAT,
STATUS LIKE EDIDC-STATUS,
END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
GD_EVENTPARM LIKE TBTCM-EVENTPARM,
GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
GD_JOBNAME LIKE TBTCM-JOBNAME,
GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
W_SPOOL_NR LIKE SY-SPONO.
%_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
GD_DESTINATION LIKE RLGRAP-FILENAME,
GD_BYTECOUNT LIKE TST01-DSIZE,
GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
C_NO(1) TYPE C VALUE ' ',
C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
MC_VALID,
P_REPID LIKE SY-REPID,
WF_ID LIKE TSP01-RQIDENT,
LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority= ' '
COPIES = '1'
COVER_PAGE = SPACE
DATA_SET = SPACE
DEPARTMENT = SPACE
DESTINATION = 'LP01'
EXPIRATION = '1'
IMMEDIATELY = 'X'
LAYOUT = 'X_65_132'
MODE = SPACE
NEW_LIST_ID = 'X'
NO_DIALOG = 'X'
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = MSTR_PRINT_PARMS
VALID = MC_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS MSTR_PRINT_PARMS.
AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = WF_ID "SPOOL NUMBER
NO_DIALOG = SPACE
PDF_DESTINATION = 'X'
IMPORTING
PDF_BYTECOUNT =
LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
TABLES
PDF = INT_PDF "TABLE FOR PDF REPORT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
GD_SENDER_TYPE = SPACE.
ELSE.
GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESS_BOD
IT_MESS_ATT
USING P_EMAIL
'Document attachment'
'PDF'
GD_ATTACHMENT_NAME
GD_ATTACHMENT_DESC
P_SENDER
GD_SENDER_TYPE
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_0846 text
-->P_0847 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
object_header = objhead
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
DOCNUM
IDOCTP
MESTYP
DIRECT
CREDAT
STATUS
FROM EDIDC
INTO CORRESPONDING FIELDS
OF TABLE TB_EDIDC
WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
SELECT KUNNR
INPNR
FROM EDPAR
INTO CORRESPONDING FIELDS
OF TABLE TB_EDPAR
FOR ALL ENTRIES IN TB_EDIDC
WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
ADRNR
FROM KNA1
INTO CORRESPONDING FIELDS
OF TABLE TB_KNA1
FOR ALL ENTRIES IN TB_EDPAR
WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
BUILDING
FROM ADRC
INTO CORRESPONDING FIELDS
OF TABLE TB_ADRC
FOR ALL ENTRIES IN TB_KNA1
WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
15 'Location Code',
30 'Idoc Number',
55 'Basic Type',
70 'Message Type',
95 'Direction',
110 'Received Date',
130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
15 TB_ED-LOC,
30 TB_ED-DOCNUM,
55 TB_ED-IDOCTP,
70 TB_ED-MESTYP,
95 TB_ED-DIRECT,
110 TB_ED-CREDAT,
130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael. -
BPEL 11g fault policy action java class not sending email
Hi All,
I am trying to attach fault policy to my bpel process. The fault conditions are working fine but the email part from the action class is not able to send email. The code execute properly , i can't see any error message in the log but I cant access the email in my inbox.
I am able to send email from using email bpel activity and also test work flow notification from em console.
I have used both the java options for sending email like javax.mail and oracle.sdp.messaging .
JAVA CODE FOR EMAIL javax.mail
public String handleFault(IFaultRecoveryContext iFaultRecoveryContext){
//Print Fault Meta Data to Console
System.out.println("****************Fault Metadata********************************");
System.out.println("Fault policy id: " + iFaultRecoveryContext.getPolicyId());
System.out.println("Fault type: " + iFaultRecoveryContext.getType());
System.out.println("Partnerlink: " + iFaultRecoveryContext.getReferenceName());
System.out.println("Port type: " + iFaultRecoveryContext.getPortType());
System.out.println("**************************************************************");
//print all properties defined in the fault-policy file
System.out.println("Properties Set for the Fault");
//Print Fault Details to Console if it exists
System.out.println("****************Fault Details********************************");
// if(iFaultRecoveryContext instanceof BPELFaultRecoveryContextImpl)
BPELFaultRecoveryContextImpl bpelCtx = (BPELFaultRecoveryContextImpl)iFaultRecoveryContext;
System.out.println("Fault: " + bpelCtx.getFault());
System.out.println("Activity: " + bpelCtx.getActivityName());
System.out.println("Composite Instance: " + bpelCtx.getCompositeInstanceId());
System.out.println("Composite Name: " + bpelCtx.getCompositeName());
System.out.println("***********************************************************");
try {
bpelCtx.addAuditTrailEntry("Sending Email...");
Map props = iFaultRecoveryContext.getProperties();
if (props != null && props.size() > 0) {
setFrom(getParameterValue((ArrayList)props.get("from")));
setTo(getParameterValue((ArrayList)props.get("to")));
setSubject(getParameterValue((ArrayList)props.get("subject")) + bpelCtx.getTitle());
setText(getParameterValue((ArrayList)props.get("text")) + "\n" + "BPEL Process Instance: " + bpelCtx.getInstanceId() + " needs intervention to recover from a technical exception: " + bpelCtx.getFault().getMessage() + ".\n" + "Check the Activities tab in the BPEL Management Console in order to resolve the error as soon as possible.\n" + "This message was automatically generated, please do not reply to it.");
setHost(getParameterValue((ArrayList)props.get("host")));
setPort(getParameterValue((ArrayList)props.get("port")));
bpelCtx.addAuditTrailEntry("to Email getFrom..."+getFrom());
bpelCtx.addAuditTrailEntry("to Email getTo..."+getTo());
bpelCtx.addAuditTrailEntry("to Email getText..."+getText());
bpelCtx.addAuditTrailEntry("to Email getHost..."+getHost());
bpelCtx.addAuditTrailEntry("to Email getPort..."+getPort());
Session mailSession = Session.getDefaultInstance(properties);
Message simpleMessage = new MimeMessage(mailSession);
bpelCtx.addAuditTrailEntry("to Email toAddresses2...");
InternetAddress fromAddress = new InternetAddress(from);
bpelCtx.addAuditTrailEntry("to Email fromAddress..."+fromAddress);
simpleMessage.setFrom(fromAddress);
String[] toAddresses = to.split(";");
if (toAddresses != null && toAddresses.length > 0)
bpelCtx.addAuditTrailEntry("to Email toAddresses3...");
InternetAddress[] toInternetAddresses =new InternetAddress[toAddresses.length];
for (int i = 0; i < toAddresses.length; i++)
bpelCtx.addAuditTrailEntry("to Email toAddresses4444..."+ toAddresses);
toInternetAddresses[i] = new InternetAddress(toAddresses[i]);
bpelCtx.addAuditTrailEntry("to Email toInternetAddresses..."+ toInternetAddresses[i]);
simpleMessage.setRecipients(RecipientType.TO,toInternetAddresses);
simpleMessage.setSubject(subject);
simpleMessage.setText(text);
Transport.send(simpleMessage);
bpelCtx.addAuditTrailEntry("After Email...");
} catch (Exception e) {
bpelCtx.addAuditTrailEntry("fault Message:" + e.getMessage());
//Custom Code to Log Fault to File/DB/JMS or send Emails etc.
return "Manual";
private String getParameterValue(ArrayList parameterList) {
String value = null;
if (parameterList != null && parameterList.size() > 0)
value = (String)parameterList.get(0);
return value;
JAVA CODE FOR EMAIL oracle.sdp.messaging
private void sendMail(IFaultRecoveryContext iFaultRecoveryContext) {
BPELFaultRecoveryContextImpl bpelCtx = (BPELFaultRecoveryContextImpl)iFaultRecoveryContext;
bpelCtx.addAuditTrailEntry("In sendMail...");
Map<String, Object> params = new HashMap<String, Object>();
// params.put(key, value); // if optional parameters need to be specified.
MessagingClient messagingClient;
try {
bpelCtx.addAuditTrailEntry("In sendMail111...");
messagingClient =
MessagingClientFactory.createMessagingClient(params);
Message newMessage = MessagingFactory.createMessage();
// newMessage.setContent(createEventPayload(iFaultRecoveryContext),"text/plain");
newMessage.setContent("Component Name :"+bpelCtx.getComponentName()+ "\n Instacne Id :"+bpelCtx.getComponentInstanceId()+
"\n Composite Instance Id :"+bpelCtx.getCompositeInstanceId()+ "\n Composite Name :" bpelCtx.getCompositeName()
"\n Activity name :"+bpelCtx.getActivityName() + "\n Activity Id :" bpelCtx.getActivityId() "\n ECID :" bpelCtx.getECID()
"\n Reference Name :"+bpelCtx.getReferenceName()+ "\n Title :" bpelCtx.getTitle()
"\n Fault :" + bpelCtx.getFault()+ "\n Port Name :"+bpelCtx.getPortType(), "text/plain");
bpelCtx.addAuditTrailEntry("In sendMail222...");
Address sender = MessagingFactory.createAddress(getFrom());
bpelCtx.addAuditTrailEntry("In sendMail sender..."+sender.toString());
bpelCtx.addAuditTrailEntry("from Email..."+getFrom());
String recipientsStr[] = to.split(";");
bpelCtx.addAuditTrailEntry("to Email..."+getTo());
bpelCtx.addAuditTrailEntry("In sendMail333...");
Address[] recipients = MessagingFactory.createAddress(recipientsStr);
bpelCtx.addAuditTrailEntry("In sendMail444...");
newMessage.addSender(sender);
messagingClient.registerAccessPoint(MessagingFactory.createAccessPoint(sender));
newMessage.addAllRecipients(recipients);
bpelCtx.addAuditTrailEntry("In sendMail5555...");
newMessage.getMessageInfo().setSession(MessageSessionType.INBOUND_SESSION);
newMessage.setSubject(getSubject());
bpelCtx.addAuditTrailEntry("Subject..."+getSubject());
String messageId = "";
bpelCtx.addAuditTrailEntry("In sendMail666...");
synchronized (this) {
bpelCtx.addAuditTrailEntry("In sendMail777...");
messageId = messagingClient.send(newMessage);
bpelCtx.addAuditTrailEntry("In sendMail888...");
Status[] statuses = messagingClient.getStatus(messageId);
bpelCtx.addAuditTrailEntry("In sendMail999...");
} catch (MessagingException e) {
bpelCtx.addAuditTrailEntry("inside exception email fault Message:" + e.getMessage());
//e.printStackTrace();
MESSAGES FROM SOA SERVER OUT LOG after test the bpel process:
===========================================
****************Fault?Metadata********************************
Fault?policy?id:?SimpleFaultPolicy
Fault?type:?bpel
Partnerlink:?Service1
Port?type:?{http://kacst.edu.sa/process/nstip/coPINotifyProcess}kacst_process_nstipCoPIMotifyProcess
Properties?Set?for?the?Fault
****************Fault?Details********************************
Fault:?com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Message Router for nstip/nstip_Pro_CoPiNotificationProcess!1.0*soa_084da522-a825-4aa6-9d1c-ca1d50b4595b is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles.</summary>
,detail=<detail><exception>Message Router for nstip/nstip_Pro_CoPiNotificationProcess!1.0*soa_084da522-a825-4aa6-9d1c-ca1d50b4595b is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles.</exception>
</detail>
,code=<code>env:Server</code>}
Activity:?Invoke1
Composite?Instance:?740332
Composite?Name:?TestBPELFaultPolicy
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "localhost", port 25, isSSL false
220 taisirsit.kacst.edu.sa ESMTP Sendmail 8.14.4+Sun/8.14.4; Fri, 12 Oct 2012 13:00:45 +0300 (AST)
DEBUG SMTP: connected to host "localhost", port: 25
EHLO taisirsit.kacst.edu.sa
250-taisirsit.kacst.edu.sa Hello localhost [127.0.0.1], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-EXPN
250-VERB
250-8BITMIME
250-SIZE
250-DSN
250-ETRN
250-DELIVERBY
250 HELP
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "EXPN", arg ""
DEBUG SMTP: Found extension "VERB", arg ""
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "SIZE", arg ""
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "ETRN", arg ""
DEBUG SMTP: Found extension "DELIVERBY", arg ""
DEBUG SMTP: Found extension "HELP", arg ""
DEBUG SMTP: use8bit false
MAIL FROM:<[email protected]>
250 2.1.0 <[email protected]>... Sender ok
RCPT TO:<[email protected]>
250 2.1.5 <[email protected]>... Recipient ok
DEBUG SMTP: Verified Addresses
DEBUG SMTP: [email protected]
DATA
354 Enter mail, end with "." on a line by itself
From: [email protected]
To: [email protected]
Message-ID: <[email protected].sa>
Subject: SOA EXCEPTIONInstance #890381 of BPELProcess1
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Testing Email From Fault
BPEL Process Instance: 890381 needs intervention to recover from a technical exception: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Message Router for nstip/nstip_Pro_CoPiNotificationProcess!1.0*soa_084da522-a825-4aa6-9d1c-ca1d50b4595b is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles.</summary>
,detail=<detail><exception>Message Router for nstip/nstip_Pro_CoPiNotificationProcess!1.0*soa_084da522-a825-4aa6-9d1c-ca1d50b4595b is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles.</exception>
</detail>
,code=<code>env:Server</code>}
Check the Activities tab in the BPEL Management Console in order to resolve the error as soon as possible.
This message was automatically generated, please do not reply to it.
250 2.0.0 q9CA0j30012424 Message accepted for delivery
QUIT
221 2.0.0 taisirsit.kacst.edu.sa closing connection
Details from Instance of BPEL PROCESS :
Started invocation of operation "process" on partner "Service1".
Oct 12, 2012 10:00:45 AM [FAULT RECOVERY] Invoked handleBPELFault on custom java action class "com.kacst.fault.CustomFaultHandler".
Oct 12, 2012 10:00:45 AM Sending Email...
Oct 12, 2012 10:00:45 AM to Email [email protected]
Oct 12, 2012 10:00:45 AM to Email [email protected]
Oct 12, 2012 10:00:45 AM to Email getText...Testing Email From Fault BPEL Process Instance: 890381 needs intervention to recover from a technical exception: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>Message Router for nstip/nstip_Pro_CoPiNotificationProcess!1.0*soa_084da522-a825-4aa6-9d1c-ca1d50b4595b is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles.</summary> ,detail=<detail><exception>Message Router for nstip/nstip_Pro_CoPiNotificationProcess!1.0*soa_084da522-a825-4aa6-9d1c-ca1d50b4595b is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles.</exception> </detail> ,code=<code>env:Server</code>} . Check the Activities tab in the BPEL Management Console in order to resolve the error as soon as possible. This message was automatically generated, please do not reply to it.
Oct 12, 2012 10:00:45 AM to Email getHost...smtp.kacst.edu.sa
Oct 12, 2012 10:00:45 AM to Email getPort...25
Oct 12, 2012 10:00:45 AM to Email toAddresses2...
Oct 12, 2012 10:00:45 AM to Email [email protected]
Oct 12, 2012 10:00:45 AM to Email toAddresses3...
Oct 12, 2012 10:00:45 AM to Email [email protected]
Oct 12, 2012 10:00:45 AM to Email [email protected]
Oct 12, 2012 10:00:45 AM After Email...
Oct 12, 2012 10:00:45 AM [FAULT RECOVERY] Marked Invoke activity as "pending manual recovery".
Oct 12, 2012 10:00:45 AM Faulted while invoking operation "process" on provider "Service1".
Please suggest.
ThanksHi,
I got the solution. our email server is sending email to the mail accounts those are in the same domain but for different domains its not able to send the email.
you can try with the email those are created on the same email server.
Thanks
Tuku -
Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMcPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
PO print sent to multiple mail id via email
Hi,
We are using the standard output type NEU, medium 5 (external send).i maintained multiple mail id in single vendor master,
i want to sent po print out for multiple mail id via email,after wt are all configurations do as a mm and abap consultant,plz
suggest.
Regards
SamHi,
You requirement is not specific.You want to print PO or want send PO via E-mail to vendor.
You can maintain multiple E-mail ID's for a vendor master.In standard possible to send PO by e-mail to vendor to single e-mail ID ONLY. If you want to send PO by e-mail in multiple (e-mail) ID's, you can go for development with ABAPer for using of function module OR can work with group e-mail concept( check with system admin team).
Regards,
Biju K
Maybe you are looking for
-
Lets say I have three people using TC and they each have a folder on the drive that they drop things in... can those folders be locked so that other can access the contents? Thanks!
-
Having trouble setting up router with verizon modem
im trying to set up my linksys router wrt54gs with my verizon dsl modemr. im having a hard time.
-
Korean Language Display Question
Hi everyone, Here's a curious question I have for anyone else here that can read/write korean. I have this one song by the artist Seven (Se7en) with the english title of the song "Holding Flowers." I have the song title input into Korean characters o
-
Store the Printing Metadata for each picture
2) Can Lightroom store print metadata (font size/color, scaling factor) for each picture and for each virtual copy the way it already stores Vibrance, virtual copies, tone curves, etc. information? Suppose Photo1 and Photo2 have widely different titl
-
Newbie : Using "this" in a function
I have a function in my main class that spawns a Dialog for user input. The strange thing is, that I get a compiler error anytime i try to use "this" inside my function. Please help. Can you see anything wrong with the code in this function? I am cal